Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Model interpretation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Three-Dimensional Modeling of Fracture Clusters in Geothermal Reservoirs

The objective of this is to develop a 3-D numerical model for simulating mode I, II, and III (tensile, shear, and out-of-plane) propagation of multiple fractures and fracture clusters to accurately predict geothermal reservoir stimulation using the virtual multi-dimensional internal bond (VMIB). Effective development of enhanced geothermal systems can significantly benefit from improved modeling of hydraulic fracturing. In geothermal reservoirs, where the temperature can reach or exceed 350oC, thermal and poro-mechanical processes play an important role in fracture initiation and propagation. In this project hydraulic fracturing of hot subsurface rock mass will be numerically modeled by extending the virtual multiple internal bond theory and implementing it in a finite element code, WARP3D, a three-dimensional finite element code for solid mechanics. The new constitutive model along with the poro-thermoelastic computational algorithms will allow modeling the initiation and propagation of clusters of fractures, and extension of pre-existing fractures. The work will enable the industry to realistically model stimulation of geothermal reservoirs. The project addresses the Geothermal Technologies Office objective of accurately predicting geothermal reservoir stimulation (GTO technology priority item). The project goal will be attained by: (i) development of the VMIB method for application to 3D analysis of fracture clusters; (ii) development of poro- and thermoelastic material sub-routines for use in 3D finite element code WARP3D; (iii) implementation of VMIB and the new material routines in WARP3D to enable simulation of clusters of fractures while accounting for the effects of the pore pressure, thermal stress and inelastic deformation; (iv) simulation of 3D fracture propagation and coalescence and formation of clusters, and comparison with laboratory compression tests; and (v) application of the model to interpretation of injection experiments (planned by our industrial partner) with reference to the impact of the variations in injection rate and temperature, rock properties, and in-situ stress.

15 GEOTHERMAL ENERGY↗

Surface speciation of yttrium and neodymium sorbed on rutile: Interpretations using the change distribution model.

The adsorption of Y3+ and Nd3+ onto rutile has been evaluated over a wide range of pH (3 11) and surface loading conditions, as well as at two ionic strengths (0.03 and 0.3 m), and temperatures (25 and 50 C). The experimental results reveal the same adsorption behavior for the two trivalent ions onto the rutile surface, with Nd3+ first adsorbing at slightly lower pH values. The adsorption of both Y3+ and Nd3+ commences at pH values below the pHznpc of rutile. The experimental results were evaluated using a charge distribution (CD) and multisite complexation (MUSIC) model, and Basic Stern layer description of the electric double layer (EDL). The coordination geometry of possible surface complexes were constrained by molecular-level information obtained from X-ray standing wave measurements and molecular dynamic (MD) simulation studies. X-ray standing wave measurements showed an inner-sphere tetradentate complex for Y3+ adsorption onto the (110) rutile surface (Zhang et al., 2004b). TheMDsimulation studies suggest additional bidentate complexes may form. The CD values for all surface species were calculated based on a bond valence interpretation of the surface complexes identified by X-ray and MD. The calculated CD values were corrected for the effect of dipole orientation of interfacial water. At low pH, the tetradentate complex provided excellent fits to the Y3+ and Nd3+ experimental data. The experimental and surface complexation modeling results show a strong pH dependence, and suggest that the tetradentate surface species hydrolyze with increasing pH. Furthermore, with increased surface loading of Y3+ on rutile the tetradentate binding mode was augmented by a hydrolyzed-bidentate Y3+ surface complex. Collectively, the experimental and surface complexation modeling results demonstrate that solution chemistry and surface loading impacts Y3+ surface speciation. The approach taken of incorporating molecular-scale information into surface complexation models (SCMs) should aid in elucidating a fundamental understating of ion-adsorption reactions.

58 GEOSCIENCES↗

A Deep Gravity model for mobility flows generation

The movements of individuals within and among cities influence critical aspects of our society, such as well-being, the spreading of epidemics, and the quality of the environment. When information about mobility flows is not available for a particular region of interest, we must rely on mathematical models to generate them. In this work, we propose Deep Gravity, an effective model to generate flow probabilities that exploits many features (e.g., land use, road network, transport, food, health facilities) extracted from voluntary geographic data, and uses deep neural networks to discover non-linear relationships between those features and mobility flows. Our experiments, conducted on mobility flows in England, Italy, and New York State, show that Deep Gravity achieves a significant increase in performance, especially in densely populated regions of interest, with respect to the classic gravity model and models that do not use deep neural networks or geographic data. Deep Gravity has good generalization capability, generating realistic flows also for geographic areas for which there is no data availability for training. Finally, we show how flows generated by Deep Gravity may be explained in terms of the geographic features and highlight crucial differences among the three considered countries interpreting the model’s prediction with explainable AI techniques.

97 MATHEMATICS AND COMPUTING↗

Thermo-magneto coupling in a dipole plasma

We observe the generation of a magnetic moment in a dipole plasma as a levitating magnet-plasma system moves in response to electron cyclotron heating and increasing {beta} (magnetically confined thermal energy). We formulate a thermodynamic model that interprets heating as injection of microscopic magnetic moments; the corresponding chemical potential is the ambient magnetic field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Statistical Learning for Nonlinear Model Reduction from Local Simulations of Stochastic and Particle- and Agent-Based Systems

Stochastic physical systems across the sciences that have very high-dimensional state spaces, with a large number of fast degrees of freedom that force direct simulators to proceed by integration steps that are orders of magnitude smaller than events of interests (e.g., particle collisions). Examples range from molecular motion to dynamics of large populations of cells. A grand challenge in the simulation and understanding of such systems is the systematic construction of accurate, interpretable, reduced models, enabling faster simulations, revealing fundamental properties of the dynamics, and predicting phenomena of interest that the original simulator could not reached with sufficient accuracy or within a given computational budget. In this projected we developed novel statistical estimation/machine learning techniques for analyzing and building empirical reduced models for important families of high-dimensional stochastic systems, in particular: - we developed techniques for estimating interaction kernels in interacting particle- and agent-based systems, which are ubiquitous in Physics, Biology and many other sciences, given observed trajectories of the system; - we developed techniques for nonlinear model reduction for high-dimensional stochastic systems that have a small number of unknown, nonlinear slow variables, and a large number of fast modes, that are possibly of large magnitude, given observed short trajectories of the system in the form of bursts of trajectories from different initial conditions; - we developed novel techniques for estimating linear dynamical systems on graphs when both the dynamics and the underlying graph are unknown, and we have a sparse set of space-time observations; - we considered the problem of estimating an unknown nonlinear observation function of a standard process (e.g. Brownian motion), so that we can recognized if an observed dynamics is "just" a nonlinear version of a known dynamics; we also developed benchmarks for learning algorithms aimed at learning and classifying diffusion processes.

97 MATHEMATICS AND COMPUTING↗

HESS Opinions: Incubating deep-learning-powered hydrologic science advances as a community

Recently, deep learning (DL) has emerged as a revolutionary and versatile tool transforming industry applications and generating new and improved capabilities for scientific discovery and model building. The adoption of DL in hydrology has so far been gradual, but the field is now ripe for breakthroughs. This paper suggests that DL-based methods can open up a complementary avenue toward knowledge discovery in hydrologic sciences. In the new avenue, machine-learning algorithms present competing hypotheses that are consistent with data. Interrogative methods are then invoked to interpret DL models for scientists to further evaluate. However, hydrology presents many challenges for DL methods, such as data limitations, heterogeneity and co-evolution, and the general inexperience of the hydrologic field with DL. The roadmap toward DL-powered scientific advances will require the coordinated effort from a large community involving scientists and citizens.Integrating process-based models with DL models will help alleviate data limitations. The sharing of data and baseline models will improve the efficiency of the community as a whole. Open competitions could serve as the organizing events to greatly propel growth and nurture data science education in hydrology, which demands a grassroots collaboration. The area of hydrologic DL presents numerous research opportunities that could, in turn,stimulate advances in machine learning as well.

58 GEOSCIENCES↗

Quasi-periodic variations in x-ray emission and long-term radio observations: Evidence for a two-component jet in Sw J1644+57

The continued observations of Sw J1644+57 in X-ray and radio bands accumulated a rich data set to study the relativistic jet launched in this tidal disruption event. The X-ray light curve of Sw J1644+57 from 5-30 days presents two kinds of quasi-periodic variations: a 200 s quasi-periodic oscillation (QPO) and a 2.7 day quasi-periodic variation. The latter has been interpreted by a precessing jet launched near the Bardeen-Petterson radius of a warped disk. Here we suggest that the ∼200 s QPO could be associated with a second, narrower jet sweeping the observer line-of-sight periodically, which is launched from a spinning black hole in the misaligned direction with respect to the black hole's angular momentum. In addition, we show that this two-component jet model can interpret the radio light curve of the event, especially the re-brightening feature starting ∼100 days after the trigger. From the data we infer that inner jet may have a Lorentz factor of Γ{sub j} ∼ 5.5 and a kinetic energy of E {sub k,} {sub iso} ∼ 3.0 × 10{sup 52} erg, while the outer jet may have a Lorentz factor of Γ{sub j} ∼ 2.5 and a kinetic energy of E{sub k,} {sub iso} ∼ 3.0 × 10{sup 53} erg.

79 ASTRONOMY AND ASTROPHYSICS↗

Bacterial Pu(V) reduction in the absence and presence of Fe(III)-NTA: modeling and experimental approach

Plutonium (Pu), a key contaminant at sites associated with the manufacture of nuclear weapons and with nuclear-energy wastes, can be precipitated to 'immobilized' plutonium phases in systems that promote bioreduction. Ferric iron (Fe 3+ ) is often present in contaminated sites, and its bioreduction to ferrous iron (Fe 2+ ) may be involved in the reduction of Pu to forms that precipitate. Alternately, Pu can be reduced directly by the bacteria. Besides Fe, contaminated sites often contain strong complexing ligands, such as nitrilotriacetic acid (NTA). We used biogeochemical modeling to interpret the experimental fate of Pu in the absence and presence of ferric iron (Fe 3+ ) and NTA under anaerobic conditions. In all cases, Shewanella alga BrY (S. alga) reduced Pu(V)(PuO 2 + ) to Pu(III), and experimental evidence indicates that Pu(III) precipitated as PuPO 4(am) . In the absence of Fe 3+ and NTA, reduction of PuO 2 + was directly biotic, but modeling simulations support that PuO 2 + reduction in the presence of Fe 3+ and NTA was due to an abiotic stepwise reduction of PuO 2 + to Pu4+, followed by reduction of Pu 4+ to Pu 3+ , both through biogenically produced Fe 2+ . This means that PuO 2 + reduction was slowed by first having Fe 3+ reduced to Fe 2+ . Modeling results also show that the degree of PuPO 4(am) precipitation depends on the NTA concentration. While precipitation out-competes complexation when NTA is present at the same or lower concentration than Pu, excess NTA can prevent precipitation of PuPO 4(am) .

54 ENVIRONMENTAL SCIENCES↗

TH-CD-207B-06: Swank Factor of Segmented Scintillators in Multi-Slice CT Detectors: Pulse Height Spectra and Light Escape

Purpose: Pulse height spectra (PHS) have been used to determine the Swank factor of a scintillator by measuring fluctuations in its light output per x-ray interaction. The Swank factor and x-ray quantum efficiency of a scintillator define the upper limit to its imaging performance, i.e. DQE(0). The Swank factor below the K-edge is dominated by optical properties, i.e. variations in light escape efficiency from different depths of interaction, denoted e(z). These variations can be optimized to improve tradeoffs in x-ray absorption, light yield, and spatial resolution. This work develops a quantitative model for interpreting measured PHS, and estimating e(z) on an absolute scale. The method is used to investigate segmented ceramic GOS scintillators used in multi-slice CT detectors. Methods: PHS of a ceramic GOS plate (1 mm thickness) and segmented GOS array (1.4 mm thick) were measured at 46 keV. Signal and noise propagation through x-ray conversion gain, light escape, detection by a photomultiplier tube and dynode amplification were modeled using a cascade of stochastic gain stages. PHS were calculated with these expressions and compared to measurements. Light escape parameters were varied until modeled PHS agreed with measurements. The resulting estimates of e(z) were used to calculate PHS without measurement noise to determine the inherent Swank factor. Results: The variation in e(z) was 67.2–89.7% in the plate and 40.2–70.8% in the segmented sample, corresponding to conversion gains of 28.6–38.1 keV{sup −1} and 17.1–30.1 keV{sup −1}, respectively. The inherent Swank factors of the plate and segmented sample were 0.99 and 0.95, respectively. Conclusion: The high light escape efficiency in the ceramic GOS samples yields high Swank factors and DQE(0) in CT applications. The PHS model allows the intrinsic optical properties of scintillators to be deduced from PHS measurements, thus it provides new insights for evaluating the imaging performance of segmented ceramic GOS scintillators.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Explaining machine-learning models for gamma-ray detection and identification

As more complex predictive models are used for gamma-ray spectral analysis, methods are needed to probe and understand their predictions and behavior. Recent work has begun to bring the latest techniques from the field of Explainable Artificial Intelligence (XAI) into the applications of gamma-ray spectroscopy, including the introduction of gradient-based methods like saliency mapping and Gradient-weighted Class Activation Mapping (Grad-CAM), and black box methods like Local Interpretable Model-agnostic Explanations (LIME) and SHapley Additive exPlanations (SHAP). In addition, new sources of synthetic radiological data are becoming available, and these new data sets present opportunities to train models using more data than ever before. In this work, we use a neural network model trained on synthetic NaI(Tl) urban search data to compare some of these explanation methods and identify modifications that need to be applied to adapt the methods to gamma-ray spectral data. We find that the black box methods LIME and SHAP are especially accurate in their results, and recommend SHAP since it requires little hyperparameter tuning. We also propose and demonstrate a technique for generating counterfactual explanations using orthogonal projections of LIME and SHAP explanations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Top quark pair production cross section at Tevatron

An overview of the recent measurements of the top antitop quark pair production cross section in proton antiproton collisions at {radical}s = 1.96 TeV in lepton + jets and dilepton final states is presented. These measurements are based on 1-2.8 fb{sup -1} of data collected with the D0 and CDF experiments at the Fermilab Tevatron collider. The cross section is measured with a precision close to 8 % and found to be compatible with the standard model prediction. Interpretations of the cross-section measurements for charge higgs search and for top quark mass measurement are also discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Magneto-Hydrodynamic Modeling in the Design and Interpretation of Wire Array Z-pinches

Magneto-hydrodynamic simulations provide a powerful tool for improving our understanding of the complex physical processes underlying the behavior of wire array Z-pinches. We show how, by using large scale parallel 3D simulations of the array as a whole, it is possible to encompass all of the important features of the wire ablation, implosion and stagnation phases and to observe how these phenomena control the X-ray pulse that is achieved. Comparison of code results with experimental data from the 'Z' and MAGPIE pulsed power generators is shown to provide a detailed benchmark test for the models. The simulation results are also used to highlight key areas for future research.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Definitions, methods, and applications in interpretable machine learning

Machine-learning models have demonstrated great success in learning complex patterns that enable them to make predictions about unobserved data. In addition to using models for prediction, the ability to interpret what a model has learned is receiving an increasing amount of attention. However, this increased focus has led to considerable confusion about the notion of interpretability. In particular, it is unclear how the wide array of proposed interpretation methods are related and what common concepts can be used to evaluate them. We aim to address these concerns by defining interpretability in the context of machine learning and introducing the predictive, descriptive, relevant (PDR) framework for discussing interpretations. The PDR framework provides 3 overarching desiderata for evaluation: predictive accuracy, descriptive accuracy, and relevancy, with relevancy judged relative to a human audience. Moreover, to help manage the deluge of interpretation methods, we introduce a categorization of existing techniques into model-based and post hoc categories, with subgroups including sparsity, modularity, and simulatability. To demonstrate how practitioners can use the PDR framework to evaluate and understand interpretations, we provide numerous real-world examples. These examples highlight the often underappreciated role played by human audiences in discussions of interpretability. Finally, based on our framework, we discuss limitations of existing methods and directions for future work. We hope that this work will provide a common vocabulary that will make it easier for both practitioners and researchers to discuss and choose from the full range of interpretation methods.

97 MATHEMATICS AND COMPUTING↗

Classification of HTTP Attacks: A Study on the ECML/PKDD 2007 Discovery Challenge

As the world becomes more reliant on Web applications for commercial, financial, and medical transactions, cyber attacks on the World Wide Web are increasing in frequency and severity. Web applications provide an attractive alternative to traditional desktop applications due to their accessibility and ease of deployment. However, the accessibility of Web applications also makes them extremely vulnerable to attack. This inherent vulnerability is intensified by the distributed nature ofWeb applications and the complexity of configuring application servers. These factors have led to a proliferation of Web-based attacks, in which attackers surreptitiously inject code into HTTP requests, allowing them to execute arbitrary commands on remote systems and perform malicious activities such as reading, altering, or destroying sensitive data. One approach for dealing with HTTP-based attacks is to identify malicious code in incoming HTTP requests and eliminate bad requests before they are processed. Using machine learning techniques, we can build a classifier to automatically label requests as “Valid” or “Attack.” For this study, we develop a simple, but effective HTTP attack classifier, based on the vector space model used commonly for Information Retrieval. Our classifier not only separates attacks from valid requests, but can also identify specific attack types (e.g., “SQL Injection” or “Path Traversal”). We demonstrate the effectiveness of our approach through experiments on the ECML/PKDD 2007 Discovery Challenge data set. Specifically, we show that our approach achieves higher precision and recall than previous methods. In addition, our approach has a number of desirable characteristics, including robustness to missing contextual information, interpretability of models, and scalability.

97 MATHEMATICS AND COMPUTING↗

Identifying Critical Infrastructure in Imagery Data Using Explainable Convolutional Neural Networks

To date, no method utilizing satellite imagery exists for detailing the locations and functions of critical infrastructure across the United States, making response to natural disasters and other events challenging due to complex infrastructural interdependencies. This paper presents a repeatable, transferable, and explainable method for critical infrastructure analysis and implementation of a robust model for critical infrastructure detection in satellite imagery. This model consists of a DenseNet-161 convolutional neural network, pretrained with the ImageNet database. The model was provided additional training with a custom dataset, containing nine infrastructure classes. The resultant analysis achieved an overall accuracy of 90%, with the highest accuracy for airports (97%), hydroelectric dams (96%), solar farms (94%), substations (91%), potable water tanks (93%), and hospitals (93%). Critical infrastructure types with relatively low accuracy are likely influenced by data commonality between similar infrastructure components for petroleum terminals (86%), water treatment plants (78%), and natural gas generation (78%). Local interpretable model-agnostic explanations (LIME) was integrated into the overall modeling pipeline to establish trust for users in critical infrastructure applications. The results demonstrate the effectiveness of a convolutional neural network approach for critical infrastructure identification, with higher than 90% accuracy in identifying six of the critical infrastructure facility types.

97 MATHEMATICS AND COMPUTING↗

GRB 110731A: Early afterglow in stellar wind powered by a magnetized outflow

One of the most energetic gamma-ray bursts, GRB 110731A, was observed from an optical to GeV energy range. Previous analysis of the prompt phase revealed similarities between the Large Area Telescope (LAT) bursts observed by Fermi: (1) a delayed onset of the high-energy emission (>100 MeV), (2) a short-lasting bright peak at later times, and (3) a temporally extended component from this phase, lasting hundreds of seconds. Additionally to the prompt phase, multiwavelength observations over different epochs showed that the spectral energy distribution was better fitted by a wind afterglow model. We present a leptonic model based on an early afterglow that evolves in a stellar wind of its progenitor. We apply this model to interpret the temporally extended LAT emission and the brightest LAT peak exhibited by the prompt phase of GRB 110731A. Additionally, using the same set of parameters, we describe the multiwavelength afterglow observations. The origin of the temporally extended LAT, X-ray, and optical flux is explained through synchrotron radiation from the forward shock (FS) and the brightest LAT peak is described, evoking the synchrotron self-Compton emission from the reverse shock (RS). The bulk Lorentz factor required in this model (Γ ≃ 520) lies in the range of values demanded for most LAT-detected GRBs. We show that the strength of the magnetic field in the RS region is ∼50 times stronger than that in the FS region. This result suggests that, for GRB 110731A, the central engine is likely entrained with strong magnetic fields.

79 ASTRONOMY AND ASTROPHYSICS↗

Electroexcitation of nucleon resonances

We review recent progress in the investigation of the electroexcitation of nucleon resonances, both in experiment and in theory. The most accurate results have been obtained for the electroexcitation amplitudes of the four lowest excited states, which have been measured in a range of Q2 up to 8 and 4.5 GeV2 for the Delta(1232)P33, N(1535)S11 and N(1440)P11, N(1520)D13, respectively. These results have been confronted with calculations based on lattice QCD, large-Nc relations, perturbative QCD (pQCD), and QCD-inspired models. The amplitudes for the Delta(1232) indicate large pion-cloud contributions at low Q2 and don't show any sign of approaching the pQCD regime for Q2<7 GeV2. Measured for the first time, the electroexcitation amplitudes of the Roper resonance, N(1440)P11, provide strong evidence for this state as a predominantly radial excitation of a three-quark (3q) ground state, with additional non-3-quark contributions needed to describe the low Q2 behavior of the amplitudes. The longitudinal transition amplitude for the N(1535)S11 was determined and has become a challenge for quark models. Explanations may require large meson-cloud contributions or alternative representations of this state. The N(1520)D13 clearly shows the rapid changeover from helicity-3/2 dominance at the real photon point to helicity-1/2 dominance at Q2 > 0.5 GeV2, confirming a long-standing prediction of the constituent quark model. The interpretation of the moments of resonance transition form factors in terms of transition transverse charge distributions in infinite momentum frame is presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗