Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Methanol”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Olefin methylation over iron zeolites and the methanol to hydrocarbons reaction

The effect of olefin addition to a stream of dimethyl ether on the methanol homologation reaction is investigated using iron-substituted zeolites Fe-beta and Fe-ZSM-5. The reaction was investigated using plug-flow microreactors in the temperature range of 240–400 °C, at a total pressure of 0.239 MPa and a WHSV of 6.12 (g DME/ gcat -hr). For Fe-beta (Si/Fe= 9.2) catalysts, isobutene co-feeding almost doubles dimethyl ether (DME) consumption rate and shifts selectivity towards larger olefins with carbon numbers from 5 to 7. Addition of isobutene above 6.3%, however, resulted in a reduction of DME consumption rates, an effect assigned to the replacement of surface methoxy groups for adsorbed olefins in the zeolite pores. Below a temperature of 340 °C hydride-transfer rates are negligible; reaction rates are stable for over 5.5 h and the products consist almost exclusively of olefins and a small amount of methane. Above 360 °C the onset of catalytic hydride transfer processes is observed leading to fast catalyst deactivation rates and an increase in the concentration of aromatic species. Iron ZSM-5 (Si/Fe = 21.4) catalysts under similar reaction conditions consumes methanol faster than Fe-beta at approximately three times the TOF (on a per iron basis). The Fe-ZSM-5 catalyst was selective to a distribution of products (C5 to C8) as compared to Fe-beta which was selective to primarily C5 and C7. Co-feeding larger olefins (2-methyl-2-butene, 2,3-dimethyl-2-butene, 2,3,3-trimethyl-1-butene, and 2,4,4-trimethyl-2-pentene) at a 3.9% olefin concentration over Fe-beta changed selectivity towards cracking products (C4 compounds such as isobutene). As the size of the olefin increases, a reduction of DME consumption rate is also observed. Here these results show that co-feeding olefins with DME over Fe-zeolites is a promising route to increase methylation rates at relatively low temperatures producing larger branched olefins and that the product distribution is highly dependent on the zeolite pore size and structure of the olefin.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Platinum/Tantalum Carbide Core–Shell Nanoparticles with Sub‐Monolayer Shells for Methanol and Oxygen Electrocatalysis

Abstract Core–shell architectures provide great opportunities to improve catalytic activity, but achieving nanoparticle stability under electrochemical cycling remains challenging. Herein, core–shell nanoparticles comprising atomically thin Pt shells over earth‐abundant TaC cores are synthesized and used as highly durable electrocatalysts for the methanol oxidation reaction (MOR) and the oxygen reduction reaction (ORR) needed to drive direct methanol fuel cells (DMFCs). Characterization data show that a thin oxidic passivation layer protects the TaC core from undergoing dissolution in the fuel cell‐relevant potential range, enabling the use of partially covered Pt/TaC core–shell nanoparticles for MOR and ORR with high stability and enhanced catalytic performance. Specifically, at the anode the surface‐oxidized TaC further enhances MOR activity compared to conventional Pt nanoparticles. At the cathode, the Pt/TaC catalyst feature increases tolerance to methanol crossover. These results show unique synergistic advantages of the core–shell particles and open opportunities to tailor catalytic properties for electrocatalytic reactions.

Chemistry↗

Kinetic, Spectroscopic, and Theoretical Assessment of Associative and Dissociative Methanol Dehydration Routes in Zeolites

Mechanistic interpretations of rates and in situ IR spectra combined with density functionals that account for van der Waals interactions of intermediates and transition states within confining voids show that associative routes mediate the formation of dimethyl ether from methanol on zeolitic acids at the temperatures and pressures of practical dehydration catalysis. Methoxy-mediated dissociative routes become prevalent at higher temperatures and lower pressures, because they involve smaller transition states with higher enthalpy, but also higher entropy, than those in associative routes. These enthalpy–entropy trade-offs merely reflect the intervening role of temperature in activation free energies and the prevalence of more complex transition states at low temperatures and high pressures. This work provides a foundation for further inquiry into the contributions of H-bonded methanol and methoxy species in homologation and hydrocarbon synthesis reactions from methanol.

Environmental Molecular Sciences Laboratory↗

Significant Roles of Surface Hydrides in Enhancing the Performance of Cu/BaTiO 2.8 H 0.2 Catalyst for CO 2 Hydrogenation to Methanol

Abstract Tuning the anionic site of catalyst supports can impact reaction pathways by creating active sites on the support or influencing metal‐support interactions when using supported metal nanoparticles. This study focuses on CO 2 hydrogenation over supported Cu nanoparticles, revealing a 3‐fold increase in methanol yield when replacing oxygen anions with hydrides in the perovskite support (Cu/BaTiO 2.8 H 0.2 yields ~146 mg/h/gCu vs. Cu/BaTiO 3 yields ~50 mg/h/gCu). The contrast suggests that significant roles are played by the support hydrides in the reaction. Temperature programmed reaction and isotopic labelling studies indicate that BaTiO 2.8 H 0.2 surface hydride species follow a Mars van Krevelen mechanism in CO 2 hydrogenation, promoting methanol production. High‐pressure steady‐state isotopic transient kinetic analysis (SSITKA) studies suggest that Cu/BaTiO 2.8 H 0.2 possesses both a higher density and more active and selective sites for methanol production compared to Cu/BaTiO 3 . An operando high‐pressure diffuse reflectance infrared spectroscopy (DRIFTS)‐SSITKA study shows that formate species are the major surface intermediates over both catalysts, and the subsequent hydrogenation steps of formate are likely rate‐limiting. However, the catalytic reactivity of Cu/BaTiO 2.8 H 0.2 towards the formate species is much higher than Cu/BaTiO 3 , likely due to the altered electronic structure of interface Cu sites by the hydrides in the support as validated by density functional theory (DFT) calculations.

He, Yang↗

Efficient Electrochemical Reduction of CO 2 to Formate in Methanol Solutions by Mn‐Functionalized Electrodes in the Presence of Amines**

Carbon cloth electrode modified by covalently attaching a manganese organometallic catalyst is used as cathode for the electrochemical reduction of CO 2 in methanol solutions. Six different industrial amines are employed as co-catalyst in millimolar concentrations to deliver a series of new reactive system. While such absorbents were so far believed to provide a CO 2 reservoir and act as sacrificial proton source, we herein demonstrate that this role can be played by methanol, and that the adduct formed between CO 2 and the amine can act as an effector or inhibitor toward the catalyst, thereby enhancing or reducing the production of formate. Pentamethyldiethylentriamine (PMDETA), identified as the best effector in our series, converts CO 2 in wet methanolic solution into bisammonium bicarbonate. Computational studies revealed that this adduct is responsible for a barrierless transformation of CO 2 to formate by the reduced form of the Mn catalyst covalently bonded to the electrode surface. As a consequence, selectivity can be switched on demand from CO to formate anion, and in the case of (PMDETA) an impressive TON HCOO- of 2.8×10 4 can be reached. This new valuable knowledge on an integrated capture and utilization system paves the way toward more efficient transformation of CO 2 into liquid fuel.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Elucidating structure and dynamics of crystalline α-zirconium phosphates intercalated with water and methanol by multinuclear solid-state MAS NMR: A comprehensive NMR approach

Solid-state NMR experiments on 2 H, 31 P, 13 C, and 1 H nuclei, including 31 P T 1 , 1 H T 1 , and 1 H T 1ρ measurements, as well as on the kinetics of proton-phosphorus cross-polarization have been performed to characterize the crystalline and amorphous α-zirconium phosphates, which were intercalated with D 2 O and/or CD 3 OD. The 13 C{ 1 H} CP MAS NMR experiment performed for compound 1-CD 3 OD (Zr (HPO 4 ) 2 .0.2CD 3 OD) with carbon cross-polarization via protons of phosphate groups has provided a prove that the methanol was intercalated into the interlayer spaces of this compound. The variable-temperature 2 H solid-echo MAS NMR spectra of intercalated compounds demonstrated that the methanol molecules, in contrast to the mobile water, were immobile, keeping, however, free CD 3 rotations around the C 3 -axis. It has been demonstrated that the intercalated species, D 2 O and CD 3 OD, do not affect the high-frequency motions of the phosphate groups. By utilizing local structural models that satisfy the constraints of the experimental data, it has been suggested that the immobile methanol molecules are located in the cavity between two neighboring layers of the zirconium phosphates. Here, the present work illustrates the reliable criteria in a comprehensive NMR approach to structural and dynamic studies of such systems.

1H↗

Variations in the surface chemistry of methanol with CeO 2 (100) at low and elevated pressures

The reactions of methanol with and without O 2 were studied on a flat, highly crystalline CeO 2 (100) thin‐film surface with ambient pressure XPS. In the absence of O 2 , the ambient pressure XPS results indicate that in both low‐pressure (≤10 −5 Torr) and high‐pressure regimes (≥10 −1 Torr), the dominant surface species is methoxy. Methanol decomposition substantially reduces the ceria and C X deposit build‐up on the surface. When O 2 is present, C X does not accumulate on the surface and the dominant surface species is different in the low‐pressure and high‐pressure regimes. Methoxy dominates at low pressure, while formate dominates at the higher pressure. The type of surface species appears to be related to the ability of O 2 to fully oxidize the ceria surface during the methanol reaction.

Mullins, David R.↗

Overcoming Thermodynamic Limitations in Dimethyl Carbonate Synthesis from Methanol and CO2

Shifting the unfavorable equilibrium in the synthesis of dimethyl carbonate from CO2 and methanol via integrated separation opens a feasible and environmentally benign route. The subtle differences in the sorption kinetics of water and methanol on Linde type A zeolites are used to selectively remove water from the methanolic reaction medium with a separation factor of 100. Combining reaction with a low temperature separation enables a 10-time higher DMC yield compared to conventional conversion.

Peng, Bo↗

Theoretical Insights into Direct Methane to Methanol Conversion over Supported Dicopper Oxo Nanoclusters

In this study, the prospect of using copper oxide nanoclusters grown by atomic layer deposition on a porphyrin support for selective oxidation of methane to methanol was examined by means of density functional theory (DFT) calculations. Ab initio thermodynamic analysis indicates that an active site in the form of Cu(μ-O)Cu can be stabilized by activation in O2 at 465K. Furthermore, a moderate methane activation energy barrier (Ea=54kJ/mol) is predicted, and the hydrogen abstraction activity of the active site could be attributed to the radical character of the bridging oxygen. Methanol extraction in this system is limited by a thermodynamic barrier to desorption of ΔG=57kJ/mol at 473K; however, desorption can be facilitated by the addition of water in a “stepped conversion” process. Overall, our results indicate similar activity between porphyrin-supported copper oxide nanoclusters and existing Cu-exchanged zeolites and provide a computational proof-of-concept for utilizing functionalized organic linkers in metal-organic frameworks (MOFs) for selective oxidation of methane to methanol.

03 NATURAL GAS↗

NiAu single atom alloys for the selective oxidation of methacrolein with methanol to methyl methacrylate

In this work, the oxidative cross-coupling of unsaturated aldehydes and alcohols with methanol is catalyzed by O-activated gold surfaces in both ambient pressure and UHV conditions. From liquid-phase studies it has been found that either the addition of a base or the use of a basic support is necessary for high yields of the corresponding methyl ester. Here we demonstrate that addition of a small amount of Ni, at the single atom limit, on supported Au nanoparticles, without the aid of a base in the reaction solution or the use of a basic support, is sufficient to activate Au for the selective oxidative esterification of methacrolein with methanol. The Ni concentration and dispersion are followed by ICP-AES and in situ DRIFTS, respectively. The active site appears to be the same for both NiAu and Au NPs; namely, an [Au-O x ]- species, as similar apparent activation energies of the reaction were found in kinetic studies over these two catalysts. Ni was also shown to allow for lower methanol concentrations to be used without affecting the catalytic activity and selectivity to the desired product, methyl methacrylate. In situ vibrational spectroscopy studies were conducted in an ATR-IR cell, where the reaction progress was monitored by detecting the gradual conversion of adsorbed reactants on the catalytic surface to intermediates and finally to the desired product, which was produced at close to 100% selectivity at conversions exceeding 25% at 60 C on NiAu single atom alloy nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tracking the phase changes in micelle-based NiGa nanocatalysts for methanol synthesis under activation and working conditions

The hydrogenation of CO 2 into high energy density fuels such as methanol, where the required H 2 is obtained from renewable sources, is of utmost importance for a sustainable society. In recent years, NiGa alloys have attracted attention as promising catalyst material systems for the hydrogenation of CO 2 into methanol at ambient pressures. They thus represent an energy-saving alternative to the Cu-based catalysts employed in today's catalytic industry that require high pressures for the CO 2 hydrogenation. However, the underlying reaction mechanisms for the NiGa system are still under debate. One of the challenges here is to unravel the evolution and coexistence of the different species in the heterogeneous NiGa catalyst system under activation and reaction conditions. To shed light on their evolution under activation in H 2 and their catalytic roles under CO 2 hydrogenation working conditions on well-defined Ni 3 Ga 1 and Ni 5 Ga 3 nanoparticle (NP) catalysts, we employed a multi-probe approach in this study. It included advanced machine learning-based analysis of operando X-ray absorption spectroscopy data combined with operando powder X-ray diffraction and near ambient pressure X-ray photoelectron spectroscopy measurements, as well as reactivity studies using bed-packed mass flow reactors. In addition, we employed atomic force microscopy and scanning transmission electron microscopy for structural characterization. Under H 2 activation at 1 bar total pressure, we concluded the formation of metallic Ni, starting for Ni 3 Ga 1 at 300 °C, and for Ni 5 Ga 3 at 400 °C. At higher temperatures, the formation of NiGa alloys follows. The α'-Ni 3 Ga 1 alloy phase is predominantly formed for the Ni 3 Ga 1 NPs, while the coexistence of α'-Ni 3 Ga 1 , δ-Ni 5 Ga 3 and Ga 2 O 3 phases is observed for the Ni 5 Ga 3 NPs after the H 2 activation. The formation of the Ga 2 O 3 phase also results in the presence of excess metallic Ni. Under CO 2 hydrogenation reaction conditions, Ga partially oxidizes again to form a Ga 2 O 3 -rich particle shell for both NP compositions, yet, to a larger extent for the Ni 3 Ga 1 NPs, which, in turn, feature a higher amount of excess Ni. We reveal that metallic Ni is responsible for the high selectivity of the Ni 3 Ga 1 NPs towards the production of methane in our catalytic tests. In contrast, the Ni 5 Ga 3 NPs display a strong selectivity toward methanol production (>92%), more than one order of magnitude higher than that for the Ni 3 Ga 1 NPs, which we ascribe to the presence of the δ-Ni 5 Ga 3 phase.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Dielectric relaxation of neodymium chloride in water and in methanol

In this work, an open-ended coaxial probe was used to study the dielectric relaxation of neodymium chloride (NdCl 3 ) in water and in methanol at room temperature over the frequency range 0.2–40.0 GHz. An equivalent circuit model based on the antenna model was used to obtain the dielectric spectra with the effective removal of spurious effects. This extends the use of the open-ended coaxial probe technique for highly conductive substances. The structural and thermodynamic parameters obtained from the dielectric spectra of aqueous NdCl 3 solutions suggest that solvent-separated ion pairs and solvent-shared ion pairs dominate the low-frequency behavior at low concentrations. In methanol, solvent-shared ion pair relaxation modes were detected. No contact pair relaxation was observed in either solvent. Under all conditions, Nd 3+ was strongly solvated, as reflected by its high effective hydration number. The estimated association constant of NdCl 3 in water at infinite dilution was within the literature values and was lower than that observed in methanol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CO 2 Hydrogenation on ZrO 2 /Cu(111) Surfaces: Production of Methane and Methanol

The conversion and utilization of carbon dioxide is a critical challenge for the control of greenhouse gas pollution and in the production of high value chemicals in C1 chemistry. ZrO 2 /Cu(111) is an inverse oxide/metal catalyst that displays high activity and stability for the hydrogenation of CO 2 into methanol at 500-600 K. At elevated temperatures, ZrO 2 grows on a CuO x /Cu(111) substrate forming islands of 10-12 nm in size and an average height of ~ 3 Å. Reaction with H 2 leads to the removal of the copper oxide producing ZrO 2 /Cu(111) surfaces which are very active for the binding and dissociation of CO 2 into CO and C. After exposing ZrO 2 /Cu(111) to moderate or elevated pressures of a CO 2 /H 2 mixture at 300 K, atomic C and minor amounts of CH x O and CO x are deposited on the catalyst surface. The adsorbed CH x O and CO x disappear upon heating above 400 K. The catalytic tests for CO 2 hydrogenation give CO as the main reaction product and CH 4 and CH 3 OH as secondary products. The relative yields of methane and methanol change with time and track the amount of atomic C deposited on the active ZrO 2 /Cu(111) surface. The formation of methane stops once the catalyst surface is saturated with C. Under steady-state conditions, ZrO 2 /Cu(111) is a much better catalyst for methanol synthesis than ZnO/Cu(111). This trend reflects variations in the size of the oxide islands and in the strength of oxide-metal interactions. The use of an inverse oxide/metal configuration is an important synthetic tool when preparing active, selective, and stable catalysts for CO 2 hydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fullerene Promotes CO 2 Reduction to Methanol by a Cobalt(II) Phthalocyanine Electrocatalyst

Heterogenization of molecular electrocatalysts offers an attractive way to improve the catalytic selectivity and efficiency of CO 2 conversion to liquid fuels. Herein, we employ density functional theory to compare the mechanism of CO 2 RR by a cobalt(II) tetra(amino)phthalocyanine (Co(II)Pc(NH 2 ) 4 ) electrocatalyst with and without the presence of fullerene support. Our DFT calculations suggest that the CO 2 reduction mechanism is initiated by a metal-based electron reduction followed by subsequent CO 2 nucleophilic addition, electron transfer, proton transfer, water dissociation, and proton-coupled electron transfer steps that lead to CO and methanol formation. We show that graphitic interactions between the Co(II)Pc(NH 2 ) 4 electrocatalyst and C 60 support selectively improve the CO 2 RR to methanol at mild potentials. The undesirable hydrogen evolution reaction (HER) was also investigated for both electrocatalysts and proceeds via the protonation of the cobalt metal center over the nitrogen atom in the inner ring. The competition between the HER and the CO 2 RR was improved in favor of CO and methanol formation using the Co(II)Pc(NH 2 ) 4 @C 60 electrocatalyst. Overall, our results suggest C 60 as a promising graphitic support for molecular electrocatalysts integration for CO 2 catalysis.

Alcohols↗

Structure and Dynamics of NaCl Ion Pairing in Solutions of Water and Methanol

Ion pairing can have profound effects upon the ionic strength of electrolyte solutions but is poorly understood in solutions containing more than one solvent. In this paper, a combined density functional theory and molecular dynamics approach is used to examine the effect of both methanol concentration and interionic distance upon the structure and dynamics within successive solvation shells of Na + and Cl – in water/methanol binary solutions. The structure and dynamics of the first and second solvation shells were studied along a reaction coordinate associated with ion pair formation using potential of mean force simulations. The lifetimes of the solvent–solvent hydrogen bonds become perturbed when the second solvation shells of the ions begin to interact. In contrast, the structural properties within the first and second solvation shells of the ions were found to be largely independent of both methanol concentration and interionic distance until a contact ion pair is formed. Thus, as the ions are brought together, the effect of the opposing ion manifests itself in the solvation dynamics before any structural changes are observed. Lastly, as anticipated based upon the decreased dielectric constant of the binary solution, ion pair formation becomes energetically more favorable as the concentration of methanol increases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogenation of CO 2 to methanol on CeO x /Cu(111) and ZnO/Cu(111) catalysts: Role of the metal-oxide interface and importance of Ce 3+ sites

The role of the interface between a metal and oxide (CeO x –Cu and ZnO–Cu) is critical to the production of methanol through the hydrogenation of CO 2 (CO 2 + 3H 2 → CH 3 OH + H 2 O). The deposition of nanoparticles of CeO x or ZnO on Cu(111), θ oxi < 0.3 monolayer, produces highly active catalysts for methanol synthesis. The catalytic activity of these systems increases in the sequence: Cu(111) < ZnO/Cu(111) < CeO x /Cu(111). The apparent activation energy for the CO 2 → CH 3 OH conversion decreases from 25 kcal/mol on Cu(111) to 16 kcal/mol on ZnO/Cu(111) and 13 kcal/mol on CeO x /Cu(111). The surface chemistry of the highly active CeO x –Cu(111) interface was investigated using ambient pressure X-ray photoemission spectroscopy (AP-XPS) and infrared reflection absorption spectroscopy (AP-IRRAS). Both techniques point to the formation of formates (HCOO – ) and carboxylates (CO 2 δ– ) during the reaction. Our results show an active state of the catalyst rich in Ce 3+ sites which stabilize a CO 2 δ– species that is an essential intermediate for the production of methanol. Furthermore, the inverse oxide/metal configuration favors strong metal–oxide interactions and makes possible reaction channels not seen in conventional metal/oxide catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Methyl Formate Formation during Methanol Conversion over the (111) Ceria Surface

We study methyl formate formation during methanol conversion on the fully oxidized and partially reduced ceria (111) surface using density functional theory. Starting from methanol and formaldehyde adsorbed on the surface, we consider two pathways of methyl formate production. Pathway 1 consists of formaldehyde dehydrogenation followed by oxygen–carbon bond formation. Along pathway 2, the oxygen–carbon bond is established prior to intermediate dehydrogenation. Formaldehyde production is observed at elevated temperature at which we expect both pathways to be energetically attainable on the fully oxidized surface. However, the probability of both reactants being adsorbed next to each other is low. This probability can be increased by the reduction of the surface. The partially reduced ceria surface is modeled by the introduction of an oxygen vacancy in the surface. If formaldehyde adsorbs over a vacancy, both pathways potentially contribute to methyl formate formation. In contrast, if methoxide that is obtained by dissociative adsorption of methanol is placed in the vacancy, methyl formate production becomes energetically highly demanding. Still, dehydrogenation of methoxide or methoxide exchange with coadsorbates converts methoxide in a vacancy to an active species for methyl formate formation while increasing the residence time of methoxide on the surface. Importantly, the preference of pathway 1 is due to the promotion of surface-bound formaldehyde dehydrogenation by methoxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impact of Particle Size on the Vapor-Phase Oxidative Coupling of Methanol and Dimethylamine over Palladium–Gold Nanoparticles

Oxidative coupling of methanol and dimethylamine in the presence of O 2 in the vapor phase over dilute Pd in Au bimetallic catalysts occurs via the dissociation of O 2 on Pd and selective oxidation of methanol on Au. Here, we synthesize a series of silica-supported PdAu alloy nanoparticle catalysts of varied Pd:Au ratios with ~5 nm particle diameter and show that these catalysts have increased selectivity to dimethylformamide across all Pd:Au ratios (~95%), distinct from observations over larger PdAu nanoparticles (~15–25 nm diameter) of similar Pd:Au ratios. Small monometallic Pd particles are more selective than large monometallic Pd particles, and small Au nanoparticles are reactive and selective for oxidative coupling (while large Au nanoparticles are inactive). Rates per surface metal atom were similar over PdAu nanoparticles of all sizes and increased monotonically with increasing Pd content for the small nanoparticles. Further, apparent reaction kinetics demonstrate distinct apparent methanol reaction order and apparent activation energy relative to those reported over larger nanoparticles of similar Pd:Au ratios. Unlike larger PdAu nanoparticles, the rate of dimethylformamide formation is not promoted by cofed water over small PdAu nanoparticles. The results of the kinetic studies are used to propose a series of elementary steps, derive a plausible rate expression, and regress rate and equilibrium constants. These results suggest high coverages of surface methoxy species and low coverages of adsorbates derived from dimethylamine. Taken together, these results demonstrate the sensitivity of the rates, selectivities, and kinetics of oxidative coupling reactions to the size of bimetallic nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗