Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Material Attributes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Intrinsic Formamidinium Tin Iodide Nanocrystals by Suppressing the Sn(IV) Impurities

The long search for non-toxic alternatives to lead halide perovskites (LHPs) has shown that some compelling properties of LHPs, such as low effective masses of carriers, can only be attained in their closest Sn(II) and Ge(II) analogs, despite their tendency to oxidation. Judicious choice of chemistry allowed formamidinium tin iodide (FASnI 3 ) to reach a power conversion efficiency of 14.81% in photovoltaic devices. This progress motivated us to develop a synthesis of colloidal FASnI 3 NCs with a concentration of Sn(IV) reduced to an insignificant level and probe their intrinsic structural and optical properties. Intrinsic FASnI 3 NCs exhibit unusually low absorption coefficients of 4 x 10 3 cm -1 at the first excitonic transition, a 190 meV increase of the bandgap as compared to the bulk material, and a lack of excitonic resonances. These features are attributed to a highly disordered lattice, distinct from the bulk FASnI 3 as supported by structural characterizations and first-principles calculations.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

A Review of Computational Models for the Flow of Milled Biomass Part I: Discrete-Particle Models

Biomass is a renewable and sustainable energy resource. Current design of biomass handling and feeding equipment leverage both experiments and numerical modeling. This paper reviews the state-of-the-art discrete element methods (DEM) for the flow of milled biomass (Part I), accompanied by a comprehensive review on continuum-based computational models (Part II). The present review on DEM is primarily focused on the features and suitability of various particle shape models for different types of milled biomass because particle shape is the predominant attribute controlling the flow behavior of complex-shaped granular material. The general strengths and weaknesses in the applicability of those models for the milled biomass modeling are summarized. In particular, comments are provided to balance the numerical model capabilities and the computational cost for the development of DEM models. To our best knowledge, this is the first-of-its-kind review on DEM specifically for biomass. Our study indicates that the current DEM models require further development, calibration, and validation based on a deep understanding of biomass particle contact mechanics and experimental data support before they can be reliably used for predictive simulations in handling and feeding systems.

42 ENGINEERING↗
DOE OSTI2023

DNA metabarcoding reveals consumption of diverse community of amphibians by invasive wild pigs (Sus scrofa) in the southeastern United States

Abstract Invasive wild pigs ( Sus scrofa ) are one of the most widespread, destructive vertebrate species globally. Their success can largely be attributed to their generalist diets, which are dominated by plant material but also include diverse animal taxa. Wild pigs are demonstrated nest predators of ground-nesting birds and reptiles, and likely pose a threat to amphibians given their extensive overlap in wetland use. DNA metabarcoding of fecal samples from 222 adult wild pigs culled monthly from 2017 to 2018 revealed a diverse diet dominated by plant material, with 166 plant genera from 56 families and 18 vertebrate species identified. Diet composition varied seasonally with availability for plants and was consistent between sexes. Amphibians were the most frequent vertebrate group consumed and represented the majority of vertebrate species detected, suggesting amphibians are potentially vulnerable to predation by wild pigs in our study region. Mammal, reptile, and bird species were also detected in pig diets, but infrequently. Our results highlight the need for research on the impacts of wild pigs on amphibians to better inform management and conservation of imperiled species.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

The sol–gel autocombustion as a route towards highly CO 2 -selective, active and long-term stable Cu/ZrO 2 methanol steam reforming catalysts

The adaption of the sol-gel autocombustion method to the Cu/ZrO 2 system opens new pathways for the specific optimisation of the activity, long-term stability and CO 2 selectivity of methanol steam reforming (MSR) catalysts. Calcination of the same post-combustion precursor at 400 °C, 600 °C or 800 °C allows accessing Cu/ZrO 2 interfaces of metallic Cu with either amorphous, tetragonal or monoclinic ZrO 2 , influencing the CO 2 selectivity and the MSR activity distinctly different. While the CO 2 selectivity is less affected, the impact of the post-combustion calcination temperature on the Cu and ZrO 2 catalyst morphology is more pronounced. A porous and largely amorphous ZrO 2 structure in the sample, characteristic for sol-gel autocombustion processes, is obtained at 400 °C. This directly translates into superior activity and long-term stability in MSR compared to Cu/tetragonal ZrO 2 and Cu/monoclinic ZrO 2 obtained by calcination at 600 °C and 800 °C. The morphology of the latter Cu/ZrO 2 catalysts consists of much larger, agglomerated and non-porous crystalline particles. Based on aberration-corrected electron microscopy, we attribute the beneficial catalytic properties of the Cu/amorphous ZrO 2 material partially to the enhanced sintering resistance of copper particles provided by the porous support morphology.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Sensor Reduction for Diversion Detection in a Realistic Heat Pipe Microreactor Using Supervised Machine Learning

Microreactors are designed as a smaller, cheaper, and safer alternative to traditional nuclear power plants. Their non-traditional characteristics and prospect of mass production and deployment will likely require new approaches to nuclear safeguards. The primary proliferation concern with microreactors is the diversion of fuel material. Such diversion may produce measurable defects in key physical attributes like neutron flux, which may in turn be detectable using machine learning models. Preliminary work has demonstrated this ability for modeled nominal and diversion scenarios using large quantities of energy integrated neutron flux data. In practice, the number of available sensors for such measurements will be limited and energy integrated flux information will not be available. This work explores the ability of tree-based gradient boosted ensemble models to classify a given microreactor core is nominal or diversion, and determine the number of fuel pins diverted in the case of diversion with reduced numbers of sensors and more realistic detector responses. Classification accuracy of greater than 98% and regression errors as low as 5% of the total number of fuel pins were achieved with as few as 15 sensors, compared to 99% and 4.1% with a maximum of 240 sensors.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Modeling-Based Design and Optimization of a Gradient Composite Transition Joint

An innovative additively manufactured gradient composite transition joint (AM-GCTJ) has been designed to join dissimilar metals, to address the pressing issue of premature failure observed in conventional dissimilar metal welds (DMWs) when subjected to increased cyclic operating conditions of fossil fuel power plants. The transition design, guided by computational modeling, developed a gradient composite material distribution, facilitating a smooth transition in material volume fraction and physical properties between different alloys. This innovative design seeks to alleviate structural challenges arising from distinct material properties, including high thermal stress and potential cracking issues resulting from the thermal expansion mismatch typically observed in conventional DMWs. In this study, we investigated the creep properties of transition joints comprising Grade 91 steel and 304 stainless steel through a combination of simulations and creep testing experiments. The implementation of a gradient composite design in the plate transition joint resulted in a significant enhancement of creep resistance when compared to the baseline conventional DMW. For instance, the creep rupture life of the transition joint was improved by > 400% in a wide range of temperature and stress testing conditions. Meanwhile, the failure location shifted to the base material of Grade 91 steel. Such enhancement can be primarily attributed to the strong mechanical constraint facilitated by the gradient composite design, which effectively reduced the stresses on the less creep-resistant alloy in the transition zone. Beyond examining plate joints, it is crucial to assess the deformation response of tubular transition joints under pressure loading and transient temperature conditions to substantiate and demonstrate the effectiveness of the design. The simulation results affirm that the tubular transition joint demonstrates superior resistance compared to its counterpart DMW when subjected to multiaxial stresses in tubular structures. In addition, optimization of the transition joint’s geometry dimensions has been conducted to diminish the accumulated deformation and enhance the service life. Lastly, the scalability and potential of the innovative transition joints for large-diameter pipe applications are addressed.

Zhang, Wei↗
DOE OSTI2021

Absorption of Nitrogen during Pulsed Wave L-PBF of 17-4 PH Steel

In the fabrication of 17-4 PH by laser powder bed fusion (L-PBF) the well-documented occurrence of large amounts of retained austenite can be attributed to an elevated concentration of nitrogen present in the material. While the effects of continuous wave (CW) laser processing on in-situ nitrogen absorption characteristics have been evaluated, power modulated pulsed wave (PW) laser processing effects have not. In this study the effects of PW L-PBF processing of 17-4 PH on nitrogen absorption, phase composition, and mechanical performance are explored using commercially available PW L-PBF equipment and compared to samples produced by CW L-PBF. PW L-PBF samples fabricated in cover gas conditions with varying amounts of nitrogen demonstrated reduced absorption levels compared to those produced by CW L-PBF with no effects on phase composition and minimal effects on mechanical performance.

17-4 PH↗
NASA NTRS1984

Research pressure instrumentation for NASA Space Shuttle main engine, modification no. 5

The advantages of silicon piezoresistive strain sensing technology are being used to achieve the objectives of state of the art pressure sensors for SSME applications. The integration of multiple functions on a single chip is the key attribute being exploited. Progress is reported in transducer packaging and materials; silicon resistor characterization at cryogenic temperatures; chip mounting; and frequency response optimization.

Anderson, P. J.↗
NASA NTRS1985

Space station data system analysis/architecture study. Task 2: Options development DR-5. Volume 1: Technology options

The second task in the Space Station Data System (SSDS) Analysis/Architecture Study is the development of an information base that will support the conduct of trade studies and provide sufficient data to make key design/programmatic decisions. This volume identifies the preferred options in the technology category and characterizes these options with respect to performance attributes, constraints, cost, and risk. The technology category includes advanced materials, processes, and techniques that can be used to enhance the implementation of SSDS design structures. The specific areas discussed are mass storage, including space and round on-line storage and off-line storage; man/machine interface; data processing hardware, including flight computers and advanced/fault tolerant computer architectures; and software, including data compression algorithms, on-board high level languages, and software tools. Also discussed are artificial intelligence applications and hard-wire communications.

Source record↗
NASA NTRS1986

Thermomechanical treatment of 2124 PM aluminum alloys with low and high dispersoid levels

The effects of thermomechanical treatment (TMT) on the mechanical properties and metallurgical structure of 2124 powder metallurgy aluminum alloys prepared from rapidly solidified powders were investigated. The alloys were prepared by using a standard canning/vacuum degassing/hot consolidation/extrusion sequence. Two compositions, with manganese contents of 0.5 and 1.5 percent, were investigated to examine the effects of low and high dispersoid levels. The results indicate that significant improvements in strength can be accomplished through TMT for this PM alloy system with little loss in toughness. The increase in strength observed is attributed to the presence of much finer, more homogeneous S-prime precipitation than that observed without TMT. Rolling deformation at room temperature resulted in some tendency for nonuniform (planar) deformation and resulted in slightly lower notch strength values. The lower notch strengths observed in the higher manganese composition were attributed to the coarser, more dense dispersoids observed in this material.

Sarkar, B.↗
NASA NTRS1987

Isotopic characterisation of kerogen-like material in the Murchison carbonaceous chondrite

Data on isotopic composition of C, H, and N in insoluble organic fraction from the Murchison CM chondrite were used to discriminate between different theories for the origin of prebiotic organic material in the early solar system. Considerable isotopic variability was found among the samples and attributed to kerogen-like organic fraction. Three to four different isotopic components, two of them of polycyclic aromatic nature, were tentatively identified. Aliphatic moieties in the kerogen-like material, most of the polycyclic aromatic network, and extractable amino acids were found to carry a highly D-enriched component believed to have originated in an interstellar molecular cloud. A least part of the polycyclic aromatic fraction may also represent interstellar material.

Kerridge, John F.↗
NASA NTRS1991

Alphonsus crater - Floor fracture and dark-mantle deposit distribution from new 3.0-cm radar images

The lunar crater Alphonsus is characterized by numerous fractures or graben, and by endogenic dark-halo craters. Existing maps of fractures from analysis of lunar photography may be biased by the east-west solar illumination. This paper presents new high-resolution, dual-polarization 3.0-cm wavelength radar images of Alphonsus with radar illumination from northerly directions, and uses these data to better map the locations of both the graben and a variety of dark-mantle deposits. The distribution of fractures, and several graben which cut the crater floor and central ridge, are cited as possible evidence for simultaneous, post-Imbrium uplift of both structures. Some of the endogenic dark halo deposits are more extensive in depolarized radar images than in photographs; these extensions are attributed in some cases to more distant emplacement of pyroclastic material, and in others to fortuitous connections with smoother, less cratered portions of the Alphonsus floor.

Zisk, Stanley H.↗
NASA NTRS1993

Low cycle fatigue behavior of polycrystalline NiAl at 300 and 1000 K

The low cycle fatigue behavior of polycrystalline NiAl was determined at 300 and 1000 K - temperatures below and above the brittle- to-ductile transition temperature (BDTT). Fully reversed, plastic strain-controlled fatigue tests were conducted on two differently fabricated alloy samples: hot isostatically pressed (HIP'ed) prealloyed powder and hot extruded castings. HIP'ed powder (HP) samples were tested only at 1000 K, whereas the more ductile cast-and-extruded (C+E) NiAl samples were tested at both 1000 and 300 K. Plastic strain ranges of 0.06 to 0.2 percent were used. The C+E NiAl cyclically hardened until fracture, reaching stress levels approximately 60 percent greater than the ultimate tensile strength of the alloy. Compared on a strain basis, NiAl had a much longer fatigue life than other B2 ordered compounds in which fracture initiated at processing-related defects. These defects controlled fatigue life at 300 K, with fracture occurring rapidly once a critical stress level was reached. At 1000 K, above the BDTT, both the C+E and HP samples cyclically softened during most of the fatigue tests in air and were insensitive to processing defects. The processing method did not have a major effect on fatigue life; the lives of the HP samples were about a factor of three shorter than the C+E NiAl, but this was attributed to the lower stress response of the C+E material. The C+E NiAl underwent dynamic grain growth, whereas the HP material maintained a constant grain size during testing. In both materials, fatigue life was controlled by intergranular cavitation and creep processes, which led to fatigue crack growth that was primarily intergranular in nature. Final fracture by overload was transgranular in nature. Also, HP samples tested in vacuum had a life three times longer than their counterparts tested in air and, in contrast to those tested in air, hardened continuously over half of the sample life, thereby indicating an environmentally assisted fatigue damage mechanism. The C+E samples were tested only in air. At 1000 K, NiAl exhibited a superior fatigue life when compared to most superalloys on a plastic strain basis, but was inferior to most superalloys on a stress basis.

Lerch, Bradley A.↗
NASA NTRS1992

Resin transfer molding for advanced composite primary wing and fuselage structures

The stitching and resin transfer molding (RTM) processes developed at Douglas Aircraft Co. are successfully demonstrating significant cost reductions with good damage tolerance properties. These attributes were identified as critical to application of advanced composite materials to commercial aircraft primary structures. The RTM/stitching developments, cost analyses, and test results are discussed of the NASA Advanced Composites Technology program.

Markus, Alan↗
NASA NTRS1993

Ceramic composites portend long turbopump lives

Use of continuous fiber reinforced ceramic matrix composites (FRCMC) for turbopump hot section components offers a number of benefits. The performance benefits of incresed turbine inlet temperature are apparent and readily quantifiable. Perhaps less obvious are the potential benefits of incresed component life. At nominal turbopump operating conditions, FRCMC offer increased operating temperature margin relative to conventional materials. This results in potential for significant life enhancement. Other attributes (e.g., thermal shock resistance and high cycle fatigue endurance) of FRCMC provide even greater potential to improve life and reduce maintenance requirements. Silicon carbide (SiC0 matrix composites with carbon fibers (C/SiC) do not degrade when exposed to hydrogen-rich steam for 10 hours at 1200 C. This FRCMC is resistant to thermal shock transients far in excess of those anticipated for advanced, high temperature turbomachinery. Orthogonal, two-dimensional (2D0, plain woven, C/SiC also does not degrade when subjected to tensile-tensile fatigue at room temperature for 4 x 10(exp 5) cycles at 75% of the ultimate strength. Runout at greater than 10(exp 6) cycle occurs for axial specimens subjected to fully reversed strain controlled fatigue at ambient temperature and 0.3% strain.

Herbell, Tomas P.↗
NASA NTRS2005

Re-187 Os-187 Isotopic and Highly Siderophile Element Systematics of Group IVB Irons

Study of the magmatic iron meteorite groups permits constraints to be placed on the chemical and isotopic composition of parent bodies, and the timing of, and crystal-liquid fractionation processes involved in the crystallization of asteroidal cores. Here we examine Re-Os isotopic and trace elemental systematics of group IVB irons. Compared to most irons, the irons comprising this group are enriched in some of the most refractory siderophile elements, yet highly-depleted in most volatile siderophile elements. These characteristics have been attributed to processes such as high temperature condensation of precursor materials and oxidation in the parent body. Most recently it has been suggested that both processes may be involved in the chemical complexity of the group. Here, high precision isotopic and highly siderophile element (HSE) concentrations are used to further examine these possible origins, and the crystallization history of the group. In addition, we have begun to assess the possibility of relating certain ungrouped irons with major groups via multi-element, trace element modeling. In a companion abstract, the isotopic and trace element systematics of the ungrouped iron Tishomingo are compared with the IVB irons.

Honesto, J.↗
NASA NTRS2013

Chemical Microsensor Development for Aerospace Applications

Numerous aerospace applications, including low-false-alarm fire detection, environmental monitoring, fuel leak detection, and engine emission monitoring, would benefit greatly from robust and low weight, cost, and power consumption chemical microsensors. NASA Glenn Research Center has been working to develop a variety of chemical microsensors with these attributes to address the aforementioned applications. Chemical microsensors using different material platforms and sensing mechanisms have been produced. Approaches using electrochemical cells, resistors, and Schottky diode platforms, combined with nano-based materials, high temperature solid electrolytes, and room temperature polymer electrolytes have been realized to enable different types of microsensors. By understanding the application needs and chemical gas species to be detected, sensing materials and unique microfabrication processes were selected and applied. The chemical microsensors were designed utilizing simple structures and the least number of microfabrication processes possible, while maintaining high yield and low cost. In this presentation, an overview of carbon dioxide (CO2), oxygen (O2), and hydrogen/hydrocarbons (H2/CxHy) microsensors and their fabrication, testing results, and applications will be described. Particular challenges associated with improving the H2/CxHy microsensor contact wire-bonding pad will be discussed. These microsensors represent our research approach and serve as major tools as we expand our sensor development toolbox. Our ultimate goal is to develop robust chemical microsensor systems for aerospace and commercial applications.

hydrogen sensors↗
NASA NTRS1996

Cost Models for MMC Manufacturing Processes

Processes for the manufacture of advanced metal matrix composites are rapidly approaching maturity in the research laboratory and there is growing interest in their transition to industrial production. However, research conducted to date has almost exclusively focused on overcoming the technical barriers to producing high-quality material and little attention has been given to the economical feasibility of these laboratory approaches and process cost issues. A quantitative cost modeling (QCM) approach was developed to address these issues. QCM are cost analysis tools based on predictive process models relating process conditions to the attributes of the final product. An important attribute, of the QCM approach is the ability to predict the sensitivity of material production costs to product quality and to quantitatively explore trade-offs between cost and quality. Applications of the cost models allow more efficient direction of future MMC process technology development and a more accurate assessment of MMC market potential. Cost models were developed for two state-of-the art metal matrix composite (MMC) manufacturing processes: tape casting and plasma spray deposition. Quality and Cost models are presented for both processes and the resulting predicted quality-cost curves are presented and discussed.

Elzey, Dana M.↗