Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Magnetic ordering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Numerical study of strong plasma shock waves produced in an electromagnetic shock tube.

A set of two-fluid Navier-Stokes equations with classical physical transport coefficients is used to compute the evolution and structure of collisional plasma shock waves in an electromagnetic shock tube. Shock speeds up to 200 cm/microsec and shocked-plasma temperatures of the order of kilovolts are studied. A strong transverse bias magnetic field is employed, which significantly alters the size and shape of the shock profiles, when compared with the zero bias field case. The wave structure is different from that of a two-fluid gasdynamic shock without transverse magnetic field. Especially significant is the effect of the small ion Larmor radius in reducing the gasdynamic shock thickness by at least an order of magnitude in the transverse shock case, which permits collisional shocks to have thicknesses much smaller than the post-shock mean free path. These collisional shock waves produce very hot ions, the ion temperature increasing with shock speed, although the formation time and distances also increase substantially with shock speed.

Schneider, S. H.↗

Energetics and the resistive tearing mode - Effects of Joule heating and radiation

The contribution of energy flux to the dynamics of magnetic field reconnection is analytically studied in order to determine the influence of Joule heating and radiation on the linear development of the tearing instability in slab geometry. A temperature-dependent Coulomb-like resistivity is used to provide the coupling between the dynamics and the energy equation. Analytical expressions are derived for the growth rates utilizing constant-psi and long-wavelength approximations. The solutions indicate the occurrence of several modes in addition to the usual tearing mode, several of which have relatively slow, complex growth rates. At large values of the magnetic Reynolds number, there are at least two modes with purely exponential growth when the radiative loss decreases with increasing temperature. If the radiation is neglected, the Joule heating alone also results in two modes with real, positive growth at large S. Below a particular value of S, all the modes are generally stabilized.

Steinolfson, R. S.↗

Magnetized Target Fusion: Prospects for Low-Cost Fusion Energy

Magnetized Target Fusion (MTF) has attracted renewed interest in recent years because it has the potential to resolve one of the major problems with conventional fusion energy research - the high cost of facilities to do experiments and in general develop practical fusion energy. The requirement for costly facilities can be traced to fundamental constraints. The Lawson condition implies large system size in the case of conventional magnetic confinement, or large heating power in the case of conventional inertial confinement. The MTF approach is to use much higher fuel density than with conventional magnetic confinement (corresponding to megabar pressures), which results in a much-reduced system size to achieve Lawson conditions. Intrinsically the system must be pulsed because the pressures exceed the strength of any known material. To facilitate heating the fuel (or "target") to thermonuclear conditions with a high-power high-intensity source of energy, magnetic fields are used to insulate the high-pressure fuel from material surroundings (thus "magnetized target"). Because of magnetic insulation, the required heating power intensity is reduced by many orders of magnitude compared to conventional inertial fusion, even with relatively poor energy confinement in the magnetic field, such as that characterized by Bohm diffusion. In this paper we show semi-quantitatively why MTF-should allow fusion energy production without costly facilities within the same generally accepted physical constraints used for conventional magnetic and inertial fusion. We also briefly discuss potential applications of this technology ranging from nuclear rockets for space propulsion to a practical commercial energy system. Finally, we report on the exploratory research underway, and the interesting physics issues that arise in the MTF regime of parameters. Experiments at Los Alamos are focused on formation of a suitable plasma target for compression, utilizing the knowledge base for compact toroids called Field-Reversed Configurations. As reported earlier, it appears that the existing pulsed-power Shiva Star facility at the Air Force Research Laboratory in Albuquerque, NM can satisfy the heating requirements by means of imploding a thin metal cylinder (called a "liner") surrounding an FRC of the type presently being developed. The proposed next step is an integrated liner-on-plasma experiment in which an FRC would be heated to 10 keV by the imploding liner.

Siemon, Richard E.↗

Shape, size, and distribution of magnetic particles in Bjurbole chondrules

Chondrules from the Bjurbole chondritic meteorite (L4) exhibit saturation remanence magnetization (SIRM) values which vary over three orders of magnitude. REM values (Natural Remanence Magnetization/SIRM) for Allende (C3V) and Chainpur (LL3) are less than 0.01 but in Bjurbole some chondrules were found to have REM values greater than 0.1 with several greater than 0.2. REM values greater than 0.1 are abnormal and cannot be acquired during weak field cooling. If exposure to a strong field (whatever the source) during the chondrules' history is responsible for the high REM values, was such history associated with a different processing which might have resulted in different shape, size, and distribution of metal particles compared to chondrules having REM values of less than 0.01? Furthermore, magnetic hysteresis results show a broad range of magnetic hardness and other intrinsic magnetic properties. These features must be related to (1) size and amount of metal; and (2) properties of, and amount of, tetrataenite in the chondrules (all chondrules thus far subjected to thermomagnetic analysis show the presence of tetrataenite). A scanning electron microscopy (SEM) study is underway to determine the relationship between the shape, size, and distribution of metal particles within individual chondrules and the magnetic properties of these chondrules. Results from the SEM study in conjunction with magnetic property data may also help to discern effects from possible lightning strikes in the nebula prior to incorporation of the chondrules into the parent body.

Nava, David F.↗

Ion cyclotron anisotropy instabilities in the magnetosheath - Theory and simulations

Second-order theory and 1D hybrid computer simulations are used to examine the nonlinear properties of proton and helium cyclotron anisotropy instabilities in the terrestrial magnetosheath at relatively weak fluctuations levels and at propagation parallel to the background magnetic field. The simulations confirm the second-order predictions that both instabilities yield efficient wave-particle interactions; the rate at which the driving species anisotropy is reduced is much greater than the rate at which that species loses kinetic energy. It is suggested that these instabilities should saturate at relatively low levels. An approximate expression is derived for the fluctuating field energy at saturation of the fastest growing modes, and it is found that it is in fair agreement with three computer simulations.

Gary, S. P.↗

Magnetic-sublevel cross sections for excitation of the n 1P levels of helium by electron impact

First-order many-body theory has been used to calculate collision-frame magnetic-sublevel differential cross sections for electron-impact excitation of the n 1P (n = 2,3,4,5,6) levels of helium for electrons with incident energy in the 25-500-eV range. By combining results from electron-impact differential-cross-section measurements and electron-photon coincidence measurements, experimental magnetic-sublevel cross sections have also been derived for the excitation of the 2 1P and 3 1P levels. The theory predicts a pronounced minimum for the M = 0 magnetic-sublevel differential cross section for incident electron energies around 30 eV. The theoretical results are compared to the experimental data and some other theoretical results.

Csanak, George↗

Pickup protons and pressure-balanced structures: Voyager 2 observations in merged interaction regions near 35 AU

Five pressure-balanced structures, each with a scale of the order of a few hundredths of an astonomical unit (AU), were identified in two merged interaction regions (MIRs) near 35 AU in the Voyager 2 plasma and magnetic field data. They include a tangential discountinuity, simple and complex magnetic holes, slow correlated variations among the plasma and magnetic field parameters, and complex uncorrelated variations among the parameters. The changes in the magnetic pressure in these events are balanced by changes in the pressure of interstellar pickup protons. Thus the pickup protons probably play a major role in the dynamics of the MIRs. The solar wind proton and electron pressures are relatively unimportant in the MIRs at 35 AU and beyond. The region near 35 AU is transition region: the Sun is the source of the magnetic field, but the interstellar medium in source of pickups protons. Relative to the solar wind proton guyroadius, the thicknesses of the discontinuities and simple magnetic holes observed near 35 AU are at least an order of magnitude greater than those observed at 1 AU. However, the thicknesses of the tangential discontinuity and simple magnetic holes observed near 35 AU (in units of the pickup proton Larmor radius) are comparable to those observed at 1 AU (in units of the solar wind proton gyroradius). Thus the gyroradius of interstellar pickup protons controls the thickness of current sheets near 35 AU. We determine the interstellar pickup proton pressure in the PBSs. Using a model for the pickup proton temperature, we estimate that the average interstellar pickup proton pressure, temperature, and density in the MIRs at 35 AU are (0.53 +/- 0.14) x 10(exp -12) erg/cu cm, (5.8 +/- 0.4) x 10(exp 6) K and (7 +/- 2) x 10(exp -4)/cu cm.

Burlaga, L. F.↗

Mass ejections from the sun - A view from Skylab

More than 30 instances of sudden mass ejections from the sun were observed with the white light coronagraph experiment aboard Skylab during the first 118 days of the mission. Typically, these ejections appear as large magnetic loops rooted at the sun, yet expanding outward through the solar corona at speeds of the order of 400 km/sec. The loops always appear to retain their magnetic connection to the sun. Eighteen of these ejections were associated with active and eruptive prominences and surges; only three ejections appear to have been flare initiated. Associations with ground-detected metric wavelength type 2 and 4 radio bursts occur for about 30% of these events; however, ground-detected type 2 and 4 radio bursts originating near the limb are almost invariably accompanied by coronagraph-observed ejections. Pressure or MHD waves run out ahead of the transient material ejecta; at times these waves can be detected by their effects on nearby coronal structures.

Gosling, J. T.↗

Modelling a C-type flare observed in microwaves and hard X-rays

Using the very large array (VLA) at 6 and 20 cm wavelength and the hard X-ray burst spectrometer on the Solar Maximum Mission, a two-ribbon flare was observed from the onset phase through the maximum and decline on November 14, 1981. Because of the extensive size of the microwave source and the gradual variations in hard X-rays whose spectrum becomes progressively flatter with time, the flare is classified as a C-type flare. Considering the hardening of the X-ray spectrum and its non-impulsive nature, a coronal trap model was invoked for the energetic electrons. The microwave emission is easily accounted for by gyrosynchronous radiation from mildly relativistic electrons. It was found that the source must be optically thick at 20 cm during the maximum phase, but as the source evolved toward an optically thin regime, the intensity decreased while the degree of circular polarization increased. In an initial homogeneous model, we found that the computed microwave spectrum was too narrow to match the patrol spectrum from 606 to 15400 MHz. In the model, the magnetic field consists of a dipolar arcade bridging the H alpha ribbons, and extending to heights of order 40,000 to 50,000 km. The variation of the magnetic field strength from footpoints to apex causes the gyrosynchrotron spectrum to be broader. Preliminary conclusions regarding the electron distributions producing the hard X-rays and the microwaves, and the suitability of this model for C-type flares is presented.

Schmahl, E. J.↗

Adaptive Numerical Dissipation Control in High Order Schemes for Multi-D Non-Ideal MHD

The required type and amount of numerical dissipation/filter to accurately resolve all relevant multiscales of complex MHD unsteady high-speed shock/shear/turbulence/combustion problems are not only physical problem dependent, but also vary from one flow region to another. In addition, proper and efficient control of the divergence of the magnetic field (Div(B)) numerical error for high order shock-capturing methods poses extra requirements for the considered type of CPU intensive computations. The goal is to extend our adaptive numerical dissipation control in high order filter schemes and our new divergence-free methods for ideal MHD to non-ideal MHD that include viscosity and resistivity. The key idea consists of automatic detection of different flow features as distinct sensors to signal the appropriate type and amount of numerical dissipation/filter where needed and leave the rest of the region free from numerical dissipation contamination. These scheme-independent detectors are capable of distinguishing shocks/shears, flame sheets, turbulent fluctuations and spurious high-frequency oscillations. The detection algorithm is based on an artificial compression method (ACM) (for shocks/shears), and redundant multiresolution wavelets (WAV) (for the above types of flow feature). These filters also provide a natural and efficient way for the minimization of Div(B) numerical error.

Yee, H. C.↗

Aspects of passive magnetic levitation based on high-T(sub c) superconducting YBCO thin films

Passive magnetic levitation systems reported in the past were mostly confined to bulk superconducting materials. Here we present fundamental studies on magnetic levitation employing cylindrical permanent magnets floating above high-T(sub c) superconducting YBCO thin films (thickness about 0.3 mu m). Experiments included free floating rotating magnets as well as well-established flexible beam methods. By means of the latter, we investigated levitation and drag force hysteresis as well as magnetic stiffness properties of the superconductor-magnet arrangement. In the case of vertical motion of the magnet, characteristic high symmetry of repulsive (approaching) and attractive (withdrawing) branches of the pronounced force-displacement hysteresis could be detected. Achievable force levels were low as expected but sufficient for levitation of permanent magnets. With regard to magnetic stiffness, thin films proved to show stiffness-force ratios about one order of magnitude higher than bulk materials. Phenomenological models support the measurements. Regarding the magnetic hysteresis of the superconductor, the Irie-Yamafuji model was used for solving the equation of force balance in cylindrical coordinates allowing for a macroscopic description of the superconductor magnetization. This procedure provided good agreement with experimental levitation force and stiffness data during vertical motion. For the case of (lateral) drag force basic qualitative characteristics could be recovered, too. It is shown that models, based on simple asymmetric magnetization of the superconductor, describe well asymptotic transition of drag forces after the change of the magnet motion direction. Virgin curves (starting from equilibrium, i.e. symmetric magnetization) are approximated by a linear approach already reported in literature only. This paper shows that basic properties of superconducting thin films allow for their application to magnetic levitation or - without need of levitation forces, e.g. microgravity - magnetic damping devices.

Schoenhuber, P.↗

Optimizing Power Density and Efficiency of a Double-Halbach Array Permanent-Magnet Ironless Axial-Flux Motor

NASA Glenn Research Center is investigating hybrid electric and turboelectric propulsion concepts for future aircraft to reduce fuel burn, emissions, and noise. Systems studies show that the weight and efficiency of the electric system components need to be improved for this concept to be feasible. This effort aims to identify design parameters that affect power density and efficiency for a double-Halbach array permanent-magnet ironless axial flux motor configuration. These parameters include both geometrical and higher-order parameters, including pole count, rotor speed, current density, and geometries of the magnets, windings, and air gap.

hybrid propulsion↗

Optimizing Power Density and Efficiency of a Double-Halbach Array Permanent-Magnet Ironless Axial-Flux Motor

NASA Glenn Research Center is investigating hybrid electric and turboelectric propulsion concepts for future aircraft to reduce fuel burn, emissions, and noise. Systems studies show that the weight and efficiency of the electric system components need to be improved for this concept to be feasible. This effort aims to identify design parameters that affect power density and efficiency for a double-Halbach array permanent-magnet ironless axial flux motor configuration. These parameters include both geometrical and higher-order parameters, including pole count, rotor speed, current density, and geometries of the magnets, windings, and air gap.

electric propulsion↗

Photospheric Current Spikes as Possible Predictors of Flares

Flares involve generation of the largest current densities in the solar atmosphere. This suggests the hypothesis that prior to a large (M,X) flare there are related time dependent changes in the photospheric current distribution, and hence in the resistive heating rate in neutral line regions (NLRs). If this is true, these changes might be useful predictors of flares. Preliminary evidence supporting this hypothesis is presented. Results from a data driven, near photospheric, 3D magnetohydrodynamic type model suggest the model might be useful for predicting M and X flares several hours to several days in advance. The model takes as input the photospheric magnetic field observed by the Helioseismic and Magnetic Imager (HMI) on the Solar Dynamics Observatory (SDO) satellite. The model computes quantities in every active region (AR) pixel for 14 ARs, with spurious Doppler periods due to SDO orbital motion filtered out of the time series of the magnetic field for each pixel. Spikes in the NLR resistive heating rate Q, appearing as increases by orders of magnitude above background values in the time series of Q are found to occur, and appear to be correlated with the occurrence of M or X flares a few hours to a few days later. The subset of spikes analyzed at the pixel level are found to occur on HMI and granulation scales of 1 arcsec and 12 minutes. Spikes are found in NLRs with and without M or X flares, and outside as well as inside NLRs, but the largest spikes are localized in the NLRs of ARs with M or X flares, and associated with horizontal magnetic field strengths approximately several hG, and vertical magnetic field strengths several orders of magnitude smaller. The spikes may be signatures of horizontal current sheets associated with emerging magnetic flux.

Goodman, Michael L.↗

A theoretical study of the high-latitude winter F region at solar minimum for low magnetic activity

A simple plasma convection model is combined with an ionospheric-atmospheric composition model in order to study the high-latitude winter F region at the solar minimum for low magnetic activity. The high latitude ionospheric features, such as the main trough, the ionization hole, the tongue of ionization, the aurorally produced ionization peaks, and the universal time effects are a natural consequence of the competition between the various chemical and transport processes known to be operating in the high-latitude ionosphere. In the polar hole, the F region peak electron density is below 300 km, and the dominant process at 300 km for NO(+) ions is diffusion.

Sojka, J. J.↗

Effects of a magnetic field gradient on the lower hybrid drift instability

The effect of a magnetic field gradient on the lower hybrid drift instability is examined in the low drift velocity regime (i.e., of the order of the ion thermal velocity). The theoretical model includes density and temperature gradients, and considers only waves propagating perpendicular to the ambient magnetic field with wavelengths of the order of the electron Larmor radius. It is found, for the case of a finite ratio of the electron pressure to the magnetic field pressure, that a magnetic gradient drift-wave resonance can be important and is stabilizing or destabilizing depending upon the physical conditions. Substantial plasma heating and a large anomalous resistivity can also occur.

Huba, J. D.↗

Intensity oscillation in H alpha-fine structures

Using a new technique of directly measuring the intensity variation from the 16mm time-lapse filtergram movies taken in the blue wing and in the line center of H-alpha, periodic intensity oscillations were found in the center of H-alpha supergranulation network, in rosette centers, and in plage granules. The oscillatory period of intensity in the network is of the order of 170 + or - 44 seconds while in regions of stronger magnetic field, such as in plages and in rosettes, the period was found to be longer, on the order of 300 + or - 50 seconds. It is suggested that observed intensity oscillation in the rosette center is related to the shooting out of dark mottles from rosettes. Oscillatory intensity fluctuations were also observed in the sunspot umbra.

Bhatnagar, A.↗

Coaligned observations of solar magnetic fields at different heights: MSFC Center director's discretionary fund final report (Project No. 88-10)

The objective was to develop the capability for and coaligned observations of the structure and evolution of the Sun's magnetic field at two different heights in the solar atmosphere: the photosphere, which is the lowest region observable with optical telescopes; and the chromosphere, which lies just above the photosphere and is the region where the magnetic field dominates the gas motion so that a well-ordered structure governed by the field is observed. By obtaining this three-dimensional picture of the solar magnetic field, a better understanding can be developed of the magnetic forces that produce and control the dynamic, high-energy phenomena occurring in the solar atmosphere that can affect the entire heliosphere, including the terrestrial environment.

Hagyard, M. J.↗