Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MICROSPHERES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Evaluation of various carbon blacks and dispersing agents for use in the preparation of uranium microspheres with carbon

A comparison study on carbon blacks and dispersing agents was performed to determine their impacts on the final properties of uranium fuel kernels with carbon. The main target compositions in this internal gelation study were 10 and 20 mol % uranium dicarbide (UC 2 ), which is UC 1.86 , with the balance uranium dioxide. After heat treatment at 1900 K in flowing carbon monoxide in argon for 12 h, the density of the kernels produced using a X-energy proprietary carbon suspension, which is commercially available, ranged from 96% to 100% of theoretical density (TD), with full conversion of UC to UC 2 at both carbon concentrations. However, higher carbon concentrations such as a 2.5 mol ratio of carbon to uranium in the feed solutions failed to produce gel spheres with the proprietary carbon suspension. The kernels using our former baseline of Mogul L carbon black and Tamol SN were 90–92% of TD with full conversion of UC to UC 2 at a variety of carbon levels. Raven 5000 carbon black and Tamol SN were used to produce 10 mol % UC2 kernels with 95% of TD. However, an increase in the Raven 5000 concentration led to a kernel density below 90% of TD. Raven 3500 carbon black and Tamol SN were used to make very dense kernels without complete conversion to UC 2 . Lastly, the selection of the carbon black and dispersing agent is highly dependent on the desired final properties of the target kernels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Enhancing visible-light photocatalytic performance and stability of Ag3PO4 nanoparticles by coupling with hierarchical flower-like In2S3 microspheres

Highlights: • A hierarchical In{sub 2}S{sub 3}/Ag{sub 3}PO{sub 4} composite photocatalyst was successfully constructed. • In{sub 2}S{sub 3}/Ag{sub 3}PO{sub 4} exhibited greatly boosted visible light photocatalytic activity. • A reasonable Z-scheme charge transfer mechanism was tentatively proposed. - Abstract: In this study, hierarchical In{sub 2}S{sub 3}/Ag{sub 3}PO{sub 4} hybrid photocatalysts were successfully fabricated through an in situ chemical precipitation method and employed to the photocatalytic degradation of methyl orange (MO) under visible light irradiation. As expected, all the In{sub 2}S{sub 3}/Ag{sub 3}PO{sub 4} composites exhibited improved photocatalytic activities compared with individual Ag{sub 3}PO{sub 4} and In{sub 2}S{sub 3}. Dramatically, the optimal apparent degradation rate constant of the In{sub 2}S{sub 3}/Ag{sub 3}PO{sub 4} composite with a theoretical weight content of 4.0% In{sub 2}S{sub 3} was almost 2.3 and 1.6 times higher than that of bare Ag{sub 3}PO{sub 4} and single In{sub 2}S{sub 3}, respectively. The enhanced photocatalytic performance was mainly attributed to the formation of Z-scheme system composed of Ag{sub 3}PO{sub 4}, Ag and In{sub 2}S{sub 3}, which could not only facilitate the transfer and separation of photogenerated charge carriers, but also preserve a strong oxidation and reduction ability. Furthermore, a reasonable Z-scheme charge transfer mechanism was also proposed in detail.

36 MATERIALS SCIENCE↗

Radiation pressure efficiency measurements of nanoparticle coated microspheres

Experimental measurements of the radiation pressure efficiency (Q{sub pr}) for several microparticles have been compared to theoretical calculations extrapolated from the Bohren-Huffman code for Mie scattering of coated particles. An increased shift of the Q{sub pr} parameter was observed for 2 μm SiO{sub 2} core particles coated with nanoparticles of higher refractive indices. Coatings of 14 nm melamine particles were found to increase the Q{sub pr} parameter 135 times over similar coatings using SiO{sub 2} particles of the same size. While a coating of 100 nm polystyrene particles also showed a significant increase, they did not agree well with theoretical values. It is hypothesized that other factors such as increased scatter, drag, and finite coating coverage are no longer negligible for coatings using nanoparticles in this size regime.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Coherent diffractive imaging of single layer microspheres

We report the extreme ultraviolet (XUV) coherent diffractive imaging of silica/polymer micro-particle samples illuminated by a table-top high harmonic generation source at the wavelength of 30 nm. We achieve images constructed from diffraction patterns acquired with 13 μm × 13 μm samples comprising a sparse monolayer of spherical silica and polymer micro-particles. Successful reconstructed image of an aperiodic sample using this HHG source will open the path to the realization of a compact soft x-ray microscope to investigate other complex absorbing samples.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Whispering gallery mode photoemission from self-assembled poly-para-phenylenevinylene microspheres

Poly[2-methoxy-5-(3,7-dimethyloctyloxy)-1,4-phenylenevinylene] (MDMOPPV) self-assembles to form well-defined spheres with several micrometers in diameter upon addition of a methanol vapor into a chloroform solution of MDMOPPV. The single sphere of MDMOPPV with 5.7 µm diameter exhibits whispering gallery mode (WGM) photoemission upon excitation with focused laser beam. The periodic emission lines are characterized by transverse electric and magnetic WGMs, and Q-factor reaches ∼345 at the highest.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optimized spray drying process for preparation of one-step calcium-alginate gel microspheres

Calcium-alginate micro particles have been used extensively in drug delivery systems. Therefore we establish a one-step method for preparation of internally gelated micro particles with spherical shape and narrow size distribution. We use four types of alginate with different G/M ratio and molar weight. The size of the particles is measured using light diffraction and scanning electron microscopy. Measurements showed that with this method, micro particles with size distribution around 4 micrometers can be prepared, and SEM imaging showed that those particles are spherical in shape.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microstructuring of polymer films by femtosecond pulses through optically trapped polystyrene microspheres

We report the laser ablation of polymers by femtosecond (18 and 54 fs) pulses focused by 1 and 3.8 {mu}m diameter spherical microlenses, which are held by optical traps. It is shown that this technique allows one to produce surface structures with lateral dimensions up to {lambda}/6 (125 nm). It is found that the size of the structures depends on the diameter of the microlens; the highest spatial resolution is achieved by using 1 {mu}m diameter microlenses. (extreme light fields and their applications)

74 ATOMIC AND MOLECULAR PHYSICS↗

Rayleigh scattering of whispering gallery modes of microspheres due to a single dipole scatterer

An exact solution for the problem of interaction between whispering gallery modes of spherical microresonators and a single dipole is presented. It is predicted that experimentally observed spectral doublets associated with this interaction are a part of a triplet whose third component has yet to be observed. It is also shown that the interaction between the dipole and nonresonant whispering gallery modes results in a renormalization of the dipole's polarizability and experimental manifestations of this effect are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Directional Laser-Driven Ion Acceleration from Microspheres

Laser-driven ion acceleration is capable of generating ion beams of MeV energy exhibiting unique attributes such as ultralow emittance. Research is still focusing on fundamental laser-target interactions to control further beam attributes. In this Letter we present the observation of directional ion acceleration of irradiated spherical targets through proton imaging. This feature, together with an earlier observed quasimonoenergetic proton burst makes spherical targets extremely attractive candidates for high quality, high repetition rate sources of laser accelerated particles.

43 PARTICLE ACCELERATORS↗

Superconducting Properties of Indium Nanostructured in Pores of Thin Films of SiO{sub 2} Microspheres

Samples of a superconducting indium nanocomposite based on a thin-film porous dielectric matrix prepared by the Langmuir–Blodgett method are obtained for the first time, and their low-temperature electrophysical and magnetic properties are studied. Films with thickness b ≤ 5 μm were made from silicon dioxide spheres with diameter D = 200 and 250 nm; indium was introduced into the pores of the films from the melt at a pressure of P ≤ 5 kbar. Thus, a three-dimensional weakly ordered structure of indium nanogranules was created in the pores, forming a continuous current-conducting grid. Measurements of the temperature and magnetic field dependences of the resistance and magnetic moment of the samples showed an increase in the critical parameters of the superconductivity state of nanostructured indium (critical temperature T{sub c} ≤ 3.62 K and critical magnetic field H{sub c} at T = 0 K H{sub c}(0) ≤ 1700 Oe) with respect to the massive material (T{sub c} = 3.41 K, H{sub c}(0) = 280 Oe). In the dependence of the resistance on temperature and the magnetic field, a step transition to the superconductivity state associated with the nanocomposite structure was observed. A pronounced hysteresis M(H) is observed in the dependence of the magnetic moment M of the nanocomposite on the magnetic field at T < T{sub c}, caused by the multiply connected structure of the current-conducting indium grid. The results obtained are interpreted taking into account the dimensional dependence of the superconducting characteristics of the nanocomposite.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Real-Time Tracking of Carbon Dioxide Concentration Using an Optical Microsphere Resonator Sensor

Whispering gallery mode resonator sensors are nondisruptive optical sensors that can detect and monitor perturbations in a gaseous environment. Through its resonant properties of peak wavelength, amplitude, and quality factor (Q factor), changes in concentration can be quantified within seconds and monitored over days with great stability. In addition, the small footprint, low cost, and high sensitivity are ideal properties for a disposable sensor that can be utilized in extreme environments. Further, the large Q factor of the resonant cavity enables long interaction lengths and amplifies the effect of small changes in the background refractive index, which is detectable in picometer shifts of the resonance wavelength. However, this measurement is susceptible to changes in other environmental factors such as temperature, pressure, and humidity, which manifest on the picometer wavelength scale, reinforcing the need to decouple the variables. In this work, we compare the spectral response of different diameter resonators to carbon dioxide, nitrogen, and its mixtures, observing the spectral shifting and broadening of the cavity resonance near 1550 nm. In addition, the effect of environmental temperature on spectral shifting due to the thermo-optic effect is characterized and quantified. Lastly, the gas concentrations are changed in real time to showcase the tracking and recovery capabilities of the resonator sensor.

47 OTHER INSTRUMENTATION↗

Magnetic microspheres and tissue model studies for therapeutic applications

The use of magnetic fluids and magnetic particles in combinatorial hyperthermia therapy for cancer treatment is reviewed. The investigation approach adopted for producing thermoregulating particles and tissue model studies for studying particle retention and heating characteristics is discussed.

Review↗

Three-dimensional characterization of tethered microspheres by total internal reflection fluorescence microscopy

Tethered particle microscopy is a powerful tool to study the dynamics of DNA molecules and DNA-protein complexes in single-molecule experiments. We demonstrate that stroboscopic total internal reflection microscopy can be used to characterize the three-dimensional spatiotemporal motion of DNA-tethered particles. By calculating characteristic measures such as symmetry and time constants of the motion, well-formed tethers can be distinguished from defective ones for which the motion is dominated by aberrant surface effects. This improves the reliability of measurements on tether dynamics. For instance, in observations of protein-mediated DNA looping, loop formation is distinguished from adsorption and other nonspecific events.

Non-NASA Center↗