Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Direct synthesis of biaxially textured nickel disilicide thin films by magnetron sputter deposition on low-cost metal tapes for flexible silicon devices

Nickel silicides are widely used as contact materials for electronic devices based on silicon (Si). However, they have been predominantly fabricated by annealing separate Ni and Si phases which leads to phase and structural complexity. In this letter, direct epitaxial growth of a single-phase nickel disilicide (NiSi 2 ) thin film by sputter deposition of NiSi 2 is achieved on low-cost and flexible Hastelloy tapes which offers a promising route to fabricate low-cost, flexible electronic devices. Biaxially textured titanium nitride (TiN) is applied as the seeding layer and the diffusion barrier under NiSi 2 . An epitaxial relationship of (001)$\langle$100$\rangle$NiSi 2 ∥ (001)$\langle$110$\rangle$TiN is observed with an extra-large lattice mismatch (~10.3%) between NiSi 2 and TiN. Both the bonding similarity and the passivation effect by hydrogen promote the epitaxial growth of NiSi 2 on TiN. The flat and smooth NiSi 2 thin film consists of grains with a size of 50–100 nm. An epitaxially grown Si film on NiSi 2 further demonstrates the potential of manufacturing high-performance Si flexible electronics with NiSi 2 /TiN/Hastelloy as the direct contact through this approach.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multi-cathode unbalanced magnetron sputtering systems

Ion bombardment of a growing film during deposition is necessary in many instances to ensure a fully dense coating, particularly for hard coatings. Until the recent advent of unbalanced magnetron (UBM) cathodes, reactive sputtering had not been able to achieve the same degree of ion bombardment as other physical vapor deposition processes. The amount of ion bombardment of the substrate depends on the plasma density at the substrate, and in a UBM system the amount of bombardment will depend on the degree of unbalance of the cathode. In multi-cathode systems, the magnetic fields between the cathodes must be linked to confine the fast electrons that collide with the gas atoms. Any break in this linkage results in electrons being lost and a low plasma density. Modeling of the magnetic fields in a UBM cathode using a finite element analysis program has provided great insight into the interaction between the magnetic fields in multi-cathode systems. Large multi-cathode systems will require very strong magnets or many cathodes in order to maintain the magnetic field strength needed to achieve a high plasma density. Electromagnets offer the possibility of independent control of the plasma density. Such a system would be a large-scale version of an ion beam enhanced deposition (IBED) system, but, for the UBM system where the plasma would completely surround the substrate, the acronym IBED might now stand for Ion Blanket Enhanced Deposition.

Sproul, William D.↗

Effect of film thickness on structural and mechanical properties of AlCrN nanocompoite thin films deposited by reactive DC magnetron sputtering

In this study, the influence of film thickness on the structural, surface morphology and mechanical properties of Aluminum chromium nitride (AlCrN) thin films has been successfully investigated. The AlCrN thin films were deposited on silicon (100) substrate using dc magnetron reactive co-sputtering at substrate temperature 400° C. The structural, surface morphology and mechanical properties were studied using X-ray diffraction, field-emission scanning electron microscopy and nanoindentation techniques respectively. The thickness of these thin films was controlled by varying the deposition time therefore increase in deposition time led to increase in film thickness. X-ray diffraction pattern of AlCrN thin films with different deposition time shows the presence of (100) and (200) orientations. The crystallite size varies in the range from 12.5 nm to 36.3 nm with the film thickness due to surface energy minimization with the higher film thickness. The hardness pattern of these AlCrN thin films follows Hall-Petch relation. The highest hardness 23.08 Gpa and young modulus 215.31 Gpa were achieved at lowest grain size of 12.5 nm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A Plasma Lens for Magnetron Sputtering

A plasma lens, consisting of a solenoid and potential-defining ring electrodes, has been placed between a magnetron and substrates to be coated. Photography reveals qualitative information on excitation, ionization, and the transport of plasma to the substrate.

36 MATERIALS SCIENCE↗

Phase transformations in nanostructured coatings based on Zr-Y-O and produced by a pulse magnetron sputtering method

Deposition of nanostructured coatings on the basis of Zr-Y-O was implemented by the pulse magnetron methods. Structural-phase states and morphology of the nanostructured coatings were investigated by TEM, SEM and the high-temperature X-ray method. The method of the high-temperature X-ray diffraction revealed the presence of reversible phase transition of the tetragonal phase to the monoclinic phase, which can ensure stress relaxation and closure of surface cracks.

36 MATERIALS SCIENCE↗

Hollow target magnetron-sputter-type solid material ion source

A thin-walled aluminum (Al) hollow electrode has been inserted into an ion source to serve as an electrode for a radio frequency magnetron discharge. The produced plasma stabilized by argon (Ar) gas sputters the Al electrode to form a beam of Al{sup +} and Ar{sup +} ions. The total beam current extracted through a 3 mm diameter extraction hole has been 50 {mu}A, with the Al{sup +} ion beam occupying 30% of the total beam current.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure and Magnetic Properties of Graded (001)-Oriented FePt Films Prepared by Magnetron Sputtering and Rapid Thermal Annealing

L1{sub 0}-FePt/[Fe/Pt]{sub 27} multilayer films were prepared on (100)-oriented single-crystal MgO substrates. Structural analysis indicates epitaxial growth of the L1{sub 0}-FePt films during high-temperature deposition. The room-temperature-deposited [Fe/Pt]{sub 27} multilayer exhibits the fcc-FePt structure grown epitaxially on the L1{sub 0}-FePt base layer. The degree of chemical order and thereby the anisotropy of the top layer has been controlled by varying the temperature of a post-deposition annealing process. Compared with the as-deposited films, coercivities of the films annealed below 400 {sup ∘}C are substantially decreased by introducing the formation of a graded anisotropy in the partially ordered top layer. Coercivities decrease for annealing temperatures that are greater than 400 {sup ∘}C due to improved ordering of the top layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of oxygen on characteristics of Zn(O,S) thin films deposited by RF magnetron sputtering

Zn(O,S) thin films were successfully deposited by reactive sputtering using Ar and O{sub 2} gas mixtures at 473 K. X-ray diffraction patterns revealed that the well crystallized Zn(O,S) films were deposited with increasing oxygen concentration in O{sub 2}/Ar, resulting in a shift of the Zn peak of 28.5° to a higher angle, closer to the ZnO peak of 34.4°. Zn(O,S) films were composed of grains agglomerated from small particles, which grew gradually with increasing oxygen concentration. The depth profiles and energy dispersive spectroscopy results of the films indicated that the O/(O+S) ratio increased from 0.04 to 0.81, and all Zn(O,S) films were Zn rich with uniform concentrations of each component. X-ray photoelectron spectroscopy revealed that, as the oxygen concentration increased to 2%, the ZnS films were transformed to Zn(O,S) films via substitution of oxygen for sulfur.

36 MATERIALS SCIENCE↗

Effects of deposition parameters on tantalum films deposited by direct current magnetron sputtering

The structure, composition, and temperature coefficient of resistance of tantalum films were studied as a function of deposition parameters and substrate temperature. As the sputtering power increases from 25 to 100 W, tantalum films deposited at 300 deg. C consisting of the {beta} phase, the preferred-growth orientation changes from (200) to (202) and the temperature coefficient of resistance reduces from -289.79 to -116.65 ppm/ deg. C. The decrease in oxygen and other impurity content in the films was observed when the deposition power was increased. The O/Ta ratio decrease and grain size reduction, which were related to a change in electrical resistivity, were also observed as substrate temperature was varied from 300 to 500 deg. C. These results indicated that the electrical properties were related to the oxygen and other impurity content and grain size in the films rather than to growth orientation. At 650 deg. C, the metastable {beta}-Ta phase was partially transformed into the stable {alpha}-Ta phase which leads to a sharp decrease in the electrical resistivity and a significant change in the microstructure of the tantalum films.

36 MATERIALS SCIENCE↗

Properties of ZnSe/Al{sub 2}O{sub 3} Nanostructures Obtained by RF Magnetron Sputtering

Experimental data for the synthesis of ZnSe/Al{sub 2}O{sub 3} nanostructures utilizing a technology widely used in integrated circuit (IC) production are reported. It has been shown that the refractive index and size of the coherent scattering domains grow, whereas the energy bandgap decreases, with an increase in ZnSe width. It has been supposed that samples with a ZnSe width of 9 Å contain a ZnSeO{sub 3} compound and/or ZnSe ⋅ Al{sub 2}O{sub 3} complex compound. Multilayer heterostructures with a ZnSe width more than 9 Å contain cubic ZnSe nanocrystallites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The effect of pretreatment by titanium ion beam on the internal stresses and microstructure of the TiAlN coating obtained by magnetron sputtering

The increase in duration of titanum ion pretreatment of the substrate-austenitic steel leads to a decrease in the transverse dimensions of the nanocrystalline columnar coating Ti{sub 1−x}AlxN structure, emergence of ferritic layer between coating and substrate and an increase in the compressive macrostresses both in the coating and in the substrate.

36 MATERIALS SCIENCE↗

High rate reactive magnetron sputter deposition of Al-doped ZnO with unipolar pulsing and impedance control system

Al-doped ZnO (AZO) films were deposited on quartz glass substrates, unheated and heated to 200 deg. C, using reactive sputtering with a special feedback system of discharge impedance combined with midfrequency pulsing. A planar Zn-Al alloy target was connected to the switching unit, which was operated in a unipolar pulse mode. The oxidation of the target surface was precisely controlled by a feedback system for the entire O{sub 2} flow ratio including ''the transition region''. The deposition rate was about 10-20 times higher than that for films deposited by conventional sputtering using an oxide target. A deposition rate of AZO films of 390 nm/min with a resistivity of 3.8x10{sup -4} {Omega} cm and a transmittance in the visible region of 85% was obtained when the films were deposited on glass substrates heated to 200 deg. C with a discharge power of 4 kW.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Boron-rich plasma by high power impulse magnetron sputtering of lanthanum hexaboride

Boron-rich plasmas have been obtained using a LaB{sub 6} target in a high power impulse sputtering (HiPIMS) system. The presence of {sup 10}B{sup +}, {sup 11}B{sup +}, Ar{sup 2+}, Ar{sup +}, La{sup 2+}, and La{sup +} and traces of La{sup 3+}, {sup 12}C{sup +}, {sup 14}N{sup +}, and {sup 16}O{sup +} have been detected using an integrated mass and energy spectrometer. Peak currents as low as 20 A were sufficient to obtain plasma dominated by {sup 11}B{sup +} from a 5 cm planar magnetron. The ion energy distribution function for boron exhibits an energetic tail extending over several 10 eV, while argon shows a pronounced peak at low energy (some eV). This is in agreement with models that consider sputtering (B, La) and gas supply (from background and 'recycling'). Strong voltage oscillations develop at high current, greatly affecting power dissipation and plasma properties.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Hollow metal target magnetron sputter type radio frequency ion source

A 70 mm diameter 70 mm long compact ion source equipped with a hollow sputtering target has been designed and tested. The hollow sputtering target serves as the radio frequency (RF) plasma excitation electrode at 13.56 MHz. A stable beam of Cu{sup +} has been extracted when Ar was used as the discharge support gas. In the extracted beam, Cu{sup +} had occupied more than 85% of the total ion current. Further increase in Cu{sup +} ions in the beam is anticipated by increasing the RF power and Ar pressure.

36 MATERIALS SCIENCE↗

Observation of a periodic runaway in the reactive Ar/O{sub 2} high power impulse magnetron sputtering discharge

This paper reports the observation of a periodic runaway of plasma to a higher density for the reactive discharge of the target material (Ti) with moderate sputter yield. Variable emission of secondary electrons, for the alternating transition of the target from metal mode to oxide mode, is understood to be the main reason for the runaway occurring periodically. Increasing the pulsing frequency can bring the target back to a metal (or suboxide) mode, and eliminate the periodic transition of the target. Therefore, a pulsing frequency interval is defined for the reactive Ar/O{sub 2} discharge in order to sustain the plasma in a runaway-free mode without exceeding the maximum power that the magnetron can tolerate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Process-structure-property correlations in pulsed dc reactive magnetron sputtered vanadium oxide thin films

Cathode hysteresis in the reactive pulsed dc sputtering of a vanadium metal target was investigated to correlate the structural and electrical properties of the resultant vanadium oxide thin films within the framework of Berg's model [Berg et al., J. Vac. Sci. Technol. A 5, 202 (1987)]. The process hysteresis during reactive pulsed dc sputtering of a vanadium metal target was monitored by measuring the cathode (target) current under different total gas flow rates and oxygen-to-argon ratios for a power density of {approx}6.6.W/cm{sup 2}. Approximately 20%-25% hysteretic change in the cathode current was noticed between the metallic and oxidized states of the V-metal target. The extent of the hysteresis varied with changes in the mass flow of oxygen as predicted by Berg's model. The corresponding microstructure of the films changed from columnar to equiaxed grain structure with increased oxygen flow rates. Micro-Raman spectroscopy indicates subtle changes in the film structure as a function of processing conditions. The resistivity, temperature coefficient of resistance, and charge transport mechanism, obeying the Meyer-Neldel relation [Meyer and Neldel, Z. Tech. Phys. (Leipzig) 12, 588 (1937)], were correlated with the cathode current hysteric behavior.

36 MATERIALS SCIENCE↗

An in situ x-ray photoelectron spectroscopy study of the initial stages of rf magnetron sputter deposition of indium tin oxide on p-type Si substrate

The interface between indium tin oxide and p-type silicon is studied by in situ X-ray photoelectron spectroscopy (XPS). This is done by performing XPS without breaking vacuum after deposition of ultrathin layers in sequences. Elemental tin and indium are shown to be present at the interface, both after 2 and 10 s of deposition. In addition, the silicon oxide layer at the interface is shown to be composed of mainly silicon suboxides rather than silicon dioxide.

36 MATERIALS SCIENCE↗