Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNESIUM COMPOUND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Analysis of the structural, electronic and optic properties of Ni doped MgSiP{sub 2} semiconductor chalcopyrite compound

The structural, electronic band structure and optic properties of the Ni doped MgSiP{sub 2} chalcopyrite compound have been performed by using first-principles method in the density functional theory (DFT) as implemented in Vienna Ab-initio Simulation Package (VASP). The generalized gradient approximation (GGA) in the scheme of Perdew, Burke and Ernzerhof (PBE) is used for the exchange and correlation functional. The present lattice constant (a) follows generally the Vegard’s law. The electronic band structure, total and partial density of states (DOS and PDOS) are calculated. We present data for the frequency dependence of imaginary and real parts of dielectric functions of Ni doped MgSiP{sub 2}. For further investigation of the optical properties the reflectivity, refractive index, extinction coefficient and electron energy loss function are also predicted. Our obtained results indicate that the lattice constants, electronic band structure and optical properties of this compound are dependent on the substitution concentration of Ni.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High temperature phase transition in SOFC anodes based on Sr{sub 2}MgMoO{sub 6-{delta}}

The double perovskite Sr{sub 2}MgMoO{sub 6-{delta}} has been recently reported as an efficient anode material for solid oxide fuel cells (SOFCs). In the present work, this material have been investigated by high temperature X-ray diffraction (XRD), differential scanning calorimetry (DSC) and impedance spectroscopy to further characterise its properties as SOFC anode. DSC and XRD measurements indicate that Sr{sub 2}MgMoO{sub 6-{delta}} exhibits a reversible phase transition around 275 deg. C from triclinic (I1-bar) with an octahedral tilting distortion to cubic (Fm3-barm) without octahedral distortion. This phase transition is continuous with increasing temperature without any sudden cell volume change during the phase transformation. The main effect of the phase transformation is observed in the electrical conductivity with a change in the activation energy at low temperature. La{sup 3+} and Fe-substituted Sr{sub 2}MgMoO{sub 6-{delta}} phases were also investigated, however these materials are unstable under oxidising conditions due to phase segregations above 600 deg. C. - Graphical abstract: The double perovskite Sr{sub 2}MgMoO{sub 6}, recently proposed as an efficient SOFC anode for direct hydrocarbon oxidation, exhibits a reversible structural phase transition from triclinic to cubic at 275 deg. C.

36 MATERIALS SCIENCE↗

Effect of composition on damage accumulation in ternary ZnO-based oxides implanted with heavy ions

Thin films of wurtzite Mg{sub x}Zn{sub 1-x}O (x{<=}0.3) grown by molecular beam epitaxy and wurtzite Cd{sub x}Zn{sub 1-x}O (x{<=}0.05) grown by metal organic chemical vapor deposition were implanted at room temperature with 150 keV Er{sup +} ions and 200 keV Au{sup +} ions in a wide dose range. Damage accumulation was studied by Rutherford backscattering/channeling spectrometry. Results show that the film composition affects the damage accumulation behavior in both MgZnO and CdZnO dramatically. In particular, increasing the Mg content in MgZnO results in enhanced damage accumulation in the region between the bulk and surface damage peaks characteristically distinguished in the pure ZnO. However, the overall damage accumulation in MgZnO layers, as well as in pure ZnO, exhibits saturation with increasing ion dose and MgZnO cannot be amorphized even at the highest ion dose used (3x10{sup 16} Er/cm{sup 2}). Increasing the Cd content in CdZnO affects the saturation stage of the damage accumulation and leads to an enhancement of damage production in both Cd and Zn sublattices.

36 MATERIALS SCIENCE↗

Crystal structure and thermal expansion of LaCr{sub 1-x}Mg{sub x}O{sub 3}, 0 < x {<=} 0.25

Highlights: Black-Right-Pointing-Pointer Homogeneity range for LaCr{sub 1-x}Mg{sub x}O{sub 3} with orthorhombic perovskite structure is x {<=} 0.25. Black-Right-Pointing-Pointer First order OR phase transition occurs at 260-311 Degree-Sign C for LaCr{sub 1-x}Mg{sub x}O{sub 3}, 0{<=} x {<=}0.25. Black-Right-Pointing-Pointer TEC for high-temperature rhombohedral phase increases with magnesium content. -- Abstract: Solid solution LaCr{sub 1-x}Mg{sub x}O{sub 3}, 0 < x {<=} 0.25 was prepared by heating stoichiometric amounts of appropriate oxides in air at 1400 Degree-Sign C, 48 h. At room temperature it crystallizes in orthorhombically distorted GdFeO{sub 3}-type structure (a Almost-Equal-To {radical}2 Multiplication-Sign a{sub per}; b Almost-Equal-To {radical}2 Multiplication-Sign a{sub pe}; c Almost-Equal-To 2 Multiplication-Sign a{sub per}, where a{sub per} - perovskite subcell parameter). High-temperature X-ray powder diffraction (HT XRPD) and dilatometry revealed first order phase transition to rhombohedral perovskite phase (R-3c, a Almost-Equal-To {radical}2 Multiplication-Sign a{sub per}, c Almost-Equal-To 2{radical}3 Multiplication-Sign a{sub per}) at 260-311 Degree-Sign C (OR phase transition). Crystal structures of room-temperature orthorhombic and high-temperature rhombohedral phases for LaCr{sub 0.75}Mg{sub 0.25}O{sub 3} were refined using HT XRPD data. Temperature of OR phase transition increases gradually with increasing of magnesium content. Low-temperature orthorhombic phase exhibits TEC lower in comparison with high-temperature rhombohedral one (e.g. for LaCr{sub 0.85}Mg{sub 0.15}O{sub 3} TEC(O) = 8.8 ppm K{sup -1}; TEC(R) = 11.6 ppm K{sup -1}). TEC for rhombohedral phase increases with increasing magnesium content from 10.4 ppm K{sup -1} for LaCr{sub 0.95}Mg{sub 0.05}O{sub 3} to 12.1 ppm K{sup -1} for LaCr{sub 0.75}Mg{sub 0.25}O{sub 3}.

36 MATERIALS SCIENCE↗

Improving Joint Formation and Tensile Properties of Dissimilar Friction Stir Welding of Aluminum and Magnesium Alloys by Solving the Pin Adhesion Problem

Friction stir welding (FSW), as a solid-state welding technology invented by TWI in 1991, has potential to join dissimilar Al/Mg alloys. In this study, the pin adhesion phenomenon affecting joint quality during FSW of 6061-T6 aluminum and AZ31B magnesium alloys was investigated. The adhesion phenomenon induced by higher heat input easily transformed the tapered-and-screwed pin into a tapered pin, which greatly reduced the tool’s ability to drive the plasticized materials and further deteriorated joint formation. Under the condition without the pin adhesion, the complex intercalated interlayer at the bottom of stir zone was beneficial to mechanical interlocking of Al/Mg alloys, improving tensile properties. However, the formation of intermetallic compounds was still the main reason of the joint fracture, significantly deteriorating tensile properties. Under the welding speed of 60 mm/min without the pin adhesion phenomenon, the maximum tensile strength of 107 MPa and elongation of 1.2% were achieved.

36 MATERIALS SCIENCE↗

Microstructural development of diffusion-brazed austenitic stainless steel to magnesium alloy using a nickel interlayer

The differences in physical and metallurgical properties of stainless steels and magnesium alloys make them difficult to join using conventional fusion welding processes. Therefore, the diffusion brazing of 316L steel to magnesium alloy (AZ31) was performed using a double stage bonding process. To join these dissimilar alloys, the solid-state diffusion bonding of 316L steel to a Ni interlayer was carried out at 900 deg. C followed by diffusion brazing to AZ31 at 510 deg. C. Metallographic and compositional analyses show that a metallurgical bond was achieved with a shear strength of 54 MPa. However, during the diffusion brazing stage B{sub 2} intermetallic compounds form within the joint and these intermetallics are pushed ahead of the solid/liquid interface during isothermal solidification of the joint. These intermetallics had a detrimental effect on joint strengths when the joint was held at the diffusion brazing temperature for longer than 20 min.

36 MATERIALS SCIENCE↗

Photoluminescence, optically stimulated luminescence, and thermoluminescence study of RbMgF{sub 3}:Eu{sup 2+}

Optically stimulated luminescence (OSL) and thermoluminescence are observed in polycrystalline RbMgF{sub 3}:Eu{sup 2+} after x-ray, {gamma}-ray, or {beta} irradiation. The main electron traps are F-centers but there are other unidentified traps. The main hole traps at room temperature are probably Eu{sup 3+} and thermal or optical stimulation leads to electron-hole recombination at the Eu{sup 3+} site and Eu{sup 2+} emissions arising from {sup 6}P{sub J} to {sup 8}S{sub 7/2} and 4f{sup 5}d(E{sub g}) to {sup 8}S{sub 7/2} transitions. We find that some of the electron traps can be emptied by infrared stimulation and all of the electron traps can be emptied by white light stimulation. The OSL dark decay is long and exceeds 5 days for traps that are emptied by white light stimulation after initial infrared bleaching. Our results show that this compound can be used as a radiation dosimeter for intermediate dose levels where the {sup 87}Rb self-dose does not significantly affect the dose reading.

36 MATERIALS SCIENCE↗

Characterization of fold defects in AZ91D and AE42 magnesium alloy permanent mold castings

Casting premium-quality magnesium alloy components for aerospace and automotive applications poses unique challenges. Magnesium alloys are known to freeze rapidly prior to filling a casting cavity, resulting in misruns and cold shuts. In addition, melt oxidation, solute segregation and turbulent metal flow during casting contribute to the formation of fold defects. In this research, formation of fold defects in AZ91D and AE42 magnesium alloys cast via the permanent mold casting process was investigated. Computer simulations of the casting process predicted the development of a turbulent metal flow in a critical casting region with abrupt geometrical transitions. SEM and light optical microscopy examinations revealed the presence of folds in this region for both alloys. However, each alloy exhibited a unique mechanism responsible for fold formation. In the AZ91D alloy, melt oxidation and velocity gradients in the critical casting region prevented fusion of merging metal front streams. In the AE42 alloy, limited solubility of rare-earth intermetallic compounds in the {alpha}-Mg phase resulted in segregation of Al{sub 2}RE particles at the leading edge of a metal front and created microstructural inhomogeneity across the fold.

36 MATERIALS SCIENCE↗

Constitutive Behavior and Forming Limit of Mg-Al-Ca-Gd Alloy Sheets at Room and Elevated Temperatures

The constitutive behavior and forming limit of a newly developed magnesium alloy sheet containing rare earth elements (Mg-Al-Ca-Gd) were investigated. Anisotropic constitutive constants were obtained through tensile tests at various temperatures and strain rates. A modified Grosman equation was adopted to describe the constitutive behavior of the magnesium alloy, taking into account the effects of temperature and strain rate. Results revealed that the proper forming temperature and the strain rate for the newly developed magnesium alloy were 210 °C and 0.001 s{sup −1}, respectively. Forming limit curves at room temperature and 210 °C were, respectively, established by the combination of hemispherical punch tests and theoretical predictions using a modified Marciniak–Kuczynski model. The accuracy of the theoretical prediction of FLD was discussed. The forming limit of Mg-Al-Ca-Gd alloy sheet increased when heated from room temperature to 210 °C.

36 MATERIALS SCIENCE↗

Phase equilibria in the Tb-Mg-Co system at 500 °C, crystal structure and hydrogenation properties of selected compounds

The isothermal section of the Tb–Mg–Co phase diagram at 500 °C has been built on the basis of XRD analysis of forty samples prepared by powder metallurgy. The existence of two ternary compounds Tb{sub 4}Mg{sub 3}Co{sub 2} and Tb{sub 4}MgCo was confirmed. The formation of two solid solutions, Tb{sub 1−x}Mg{sub x}Co{sub 3} (0≤x≤0.4) and Tb{sub 1-−x}Mg{sub x}Co{sub 2} (0≤x≤0.6), was found for the first time. It is shown that Tb{sub 5}Mg{sub 24} also dissolves a small amount of Co. Other binary compounds do not dissolve the third component. The Tb{sub 4}MgCo and TbMgCo{sub 4} compounds form hydrides (12.7 and 5.3 at.H/f.u. capacity, respectively) that retain the original structure of metallic matrices. Upon thermal desorption the Tb{sub 4}MgCoH{sub 12.7} hydride was stable up to 300 °C and disproportionated at higher temperature. Two other hydrides, Tb{sub 4}Mg{sub 3}Co{sub 2}H{sub ∼4} and Tb{sub 2}MgCo{sub 9}H{sub 12}, are unstable in air and decompose into the initial compounds. - Highlights: • The phase equilibria at 500 °°C in the Tb–Mg–Co system has been studied. • The existence of two ternary compounds, Tb{sub 4}Mg{sub 3}Co{sub 2} and Tb{sub 4}MgCo, was confirmed. • The formation of two solid solutions, Tb{sub 1−x}Mg{sub x}Co{sub 3} and Tb{sub 1−x}Mg{sub x}Co{sub 2}, was found. • Hydrogen sorption–desorption properties have been studied for the selected alloys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimizing diffusion bonding parameters to maximize the strength of AA6061 aluminum and AZ61A magnesium alloy joints

The main difficulty when joining magnesium (Mg) and aluminum (Al) alloys by fusion welding process lies in the existence of oxide films and formation of brittle intermetallic in the weld region. However, solid-state welding processes such as friction welding and diffusion bonding are suitable processes to join these two materials. The diffusion bonding process parameters such as bonding temperature, bonding pressure, holding time, and surface roughness of the bond specimen play a major role to determine the joint strength. In this investigation, an attempt was made to develop empirical relationships to predict the lap shear strength and bonding strength of diffusion bonded dissimilar joints of AZ61A magnesium and AA6061 aluminum alloys, incorporating the above-mentioned parameters. Response surface methodology (RSM) was applied to optimize the diffusion bonding process parameters to attain the maximum shear strength and bonding strength of the joint. From this investigation, it is found that the bonds fabricated with the bonding temperature of 420.43°C, bonding pressure of 7.70 MPa, holding time of 27.15 min, and surface roughness of 0.10 μm exhibited maximum shear strength and bonding strength of 51.24 and 72.10 MPa, respectively.

36 MATERIALS SCIENCE↗

Polarization reversal and domain kinetics in magnesium doped stoichiometric lithium tantalate

The polarization reversal process has been studied in 1 mol. % MgO doped stoichiometric lithium tantalate (LT) single crystal. The revealed stages of domain structure evolution represent (1) continuous nucleation and growth of isolated hexagonal domains with walls oriented along Y directions and (2) continuous motion of the plane domain walls stimulated by merging with isolated domains. The activation field dependence of the switching time has been revealed. The coercive field for quasi-static switching is about 150 V/mm. The bulk screening process has been analyzed. The main parameters of the switching process have been compared with other representatives of LT family.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Friction stir welding joint of dissimilar materials between AZ31B magnesium and 6061 aluminum alloys: Microstructure studies and mechanical characterizations

Friction stir welding is an efficient manufacturing method for joining dissimilar alloys, which can dramatically reduce grain sizes and offer high mechanical joint efficiency. Lap FSW joints between dissimilar AZ31B and Al 6061 alloy sheets were made at various tool rotation and travel speeds. Rotation and travel speeds varied between 560–1400 r/min and 16–40 mm/min respectively, where the ratio between these parameters was such that nearly constant pitch distances were applied during welding. X-ray diffraction pattern (XRD), optical microscopy images (OM), electron probe microanalysis (EPMA) and scanning electron microscopy equipped with an energy-dispersive X-ray spectroscopy (SEM-EDS) were used to investigate the microstructures of the joints welded. Intermetallic phases including Al{sub 12}Mg{sub 17} (γ) and Al{sub 3}Mg{sub 2} (β) were detected in the weld zone (WZ). For different tool rotation speeds, the morphology of the microstructure in the stir zone changed significantly with travel speed. Lap shear tensile test results indicated that by simultaneously increasing the tool rotation and travel speeds to 1400 r/min and 40 mm/min, the joint tensile strength and ductility reached a maximum. Microhardness measurements and tensile stress–strain curves indicated that mechanical properties were affected by FSW parameters and mainly depended on the formation of intermetallic compounds in the weld zone. In addition, a debonding failure mode in the Al/Mg dissimilar weld nugget was investigated by SEM and surface fracture studies indicated that the presence of intermetallic compounds in the weld zone controlled the failure mode. XRD analysis of the fracture surface indicated the presence of brittle intermetallic compounds including Al{sub 12}Mg{sub 17} (γ) and Al{sub 3}Mg{sub 2} (β). - Highlights: • Dissimilar Al/Mg joint was obtained by lap friction stir welding technique. • Effect of rotation and travel speeds on the formation of intermetallic compounds • Microstructure and chemical studies including metallography, XRD, SEM-EDS, and EPMA • Mechanical property tests such as stress–strain curves, failure load and hardness • IMCs as Al{sub 3}Mg{sub 2} and Al{sub 12}Mg{sub 17} were identified in weld nugget and at Al/Mg interface.

36 MATERIALS SCIENCE↗

Anisotropy of the electro-optic effect in magnesium-doped LiNbO{sub 3} crystals

Specific features of constructing indicatory surfaces of the electro-optic effect (EOE) are described. The generalized case for the symmetry class 3m and all three possible indicatory surfaces under orthogonal experimental conditions, when the directions of light propagation and electric field are orthogonal, is considered. The EOE surfaces are constructed for magnesium-doped lithium niobate crystals. The specific features of anisotropy of these surfaces are discussed and their extreme values and corresponding angular coordinates are found. To construct the indicatory surfaces, all absolute coefficients of the linear electro-optic effect are determined by the interferometric method. The difference in the electro-optic coefficients of pure and magnesiumdoped crystals does not exceed 10%. An advantage of doped crystals is their high durability to high-power laser radiation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrochemical properties of magnesium doped LiFePO{sub 4} cathode material prepared by sol–gel method

Magnesium doped Li{sub 1−2x}Mg{sub x}FePO{sub 4}/C (x = 0.00, 0.01, 0.03, 0.05) cathode materials were synthesized by sol–gel method, and the effect of magnesium doping as well as its content on the electrochemical properties for lithium batteries was also investigated{sub .} Their morphology was studied with field emission scanning electron microscope and Li{sub 1−2x}Mg{sub x}FePO{sub 4} materials showed the olivine phase without impurities. The thin carbon layer of Li{sub 1−2x}Mg{sub x}FePO{sub 4}/C was confirmed by high resolution transmission electron microscopy. The magnesium doped Li{sub 1−2x}Mg{sub x}FePO{sub 4}/C particles were smaller than those undoped. The Li{sub 1−2x}Mg{sub x}FePO{sub 4}/C materials showed better cycling behavior than undoped LiFePO{sub 4}, especially at high C-rate in which Li{sub 0.94}Mg{sub 0.03}FePO{sub 4}/C composition exhibited the best electrochemical properties.

36 MATERIALS SCIENCE↗

Ultraviolet light assisted periodic poling of near-stoichiometric, magnesium-doped lithium niobate crystals

Ferroelectric domain reversal by application of electric-fields to near-stoichiometric lithium niobate crystals containing 1.3 mol % magnesium is investigated. The +z-face of the crystal is coated with a patterned photoresist layer that yields both a structured ultraviolet light absorber and a structured electric insulator. Periodic ferroelectric domain inversion in a z-cut crystal is then achieved by combination of illumination with light of the wavelength of 334 nm that reduces the coercive field strength inside the crystal by up to 50% and application of an external electrical field. Domain patterns with a period length of 10 {mu}m are fabricated in a 500 {mu}m thick crystal.

36 MATERIALS SCIENCE↗

ZnCdMgSe-Based Semiconductors for Intersubband Devices

This paper presents a review of recent results on the application of ZnCdMgSe-based wide bandgap II-VI compounds to intersubband devices such as quantum cascade lasers and quantum well infrared photodetectors operating in the mid-infrared region. The conduction band offset of ZnCdSe/ZnCdMgSe quantum well structures was determined from contactless electroreflectance measurements to be as high as 1.12 eV. FT-IR was used to measure intersubband absorption in multi-quantum well structures in the mid-IR range. Electroluminescence at 4.8 {mu}m was observed from a quantum cascade emitter structure made from these materials. Preliminary results are also presented on self assembled quantum dots of CdSe on ZnCdMgSe, and novel quantum well structures with metastable binary MgSe barriers.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

An Analysis of Characteristics of Magnetostatic Waves Propagating in Nonhomogeneous Fields Across the Ferrospinel Film Thickness

The amplitude-frequency characteristics (AFCs) of magnetostatic waves in the films of magnesium-manganese ferrospinels with nanostructured inhomogeneities are discussed. A common effect, observed in the film AFCs under different process conditions, is the ‘oscillations of propagation’ of magnetostatic waves as a function of the frequency. The oscillation pattern is thought to depend on the inhomogeneous exchange parameters and the surface anisotropy constants. The wave instability is characterized by the resonant interaction of the dipole magnetostatic waves with the surface spin waves. It is shown that the ferrospinel films with periodic nanostructured inhomogeneities of 30–40 nm could be treated as magnon crystals. An inclusion of the inhomogeneity into consideration allows one to provide reasoning for the formation of the rejection bands within the range 9–12 GHz, whose frequencies correspond to Bragg frequencies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗