Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Localization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Analysis of implicit local linearization techniques for upwind and TVD algorithms

An attempt is made to investigate local time linearization techniques for implicit flux-difference splitting and flux-vector splitting schemes in the simplest settings (i.e., first-order spatial schemes and one-dimensional Euler flows). It is noted that first-order spatial schemes provide the simplest examples of schemes which are collective extensions of scalar TVD schemes. Simple analytical results concerning the local linearizations are highlighted and subsequently verified using a numerical fixed-point analysis on selected problems. It is noted that while primary emphasis is on asymptotic behavior, many of the results have implications for time-accurate calculations as well.

Barth, Timothy J.↗
NASA NTRS1986

Effect of a rotor wake on the local heat transfer on the forward half of a circular cylinder

Turbine rotor-stator wake dynamics was simulated by a spoked wheel rotating in annular flow, generating rotor wakes. Spanwise averaged circumferentially local heat transfer in the circular cylindrical leading edge region of a turbine airfoil was obtained. Reynolds numbers ranged from 35,000 to 175,000. Strouhal numbers ranged from 0.63 to 2.50. Wakes were generated by 2 sets of circular cylindrical bars, 1.59 and 3.18 mm in diameter. The rotor could be rotated either clockwise or counterclockwise. Grid turbulence was introduced upstream yielding freestream turbulence of 1.0 to 2.5 percent at the stator. Data represented an extensive body of local heat transfer coefficients, which can be used to model the leading edge region of a turbine airfoil. In the presence of rotor wakes, an asymmetry from the leeward to windward side was noted. Windward side levels were 30 to 40 percent higher than the corresonding leeward side.

Morehouse, Kim A.↗
NASA NTRS1986

Local heat transfer augmentation in channels with two opposite ribbed surfaces

The local heat transfer coefficient distribution of a square channel with two opposite ribbed walls was determined. The square channel was connected to a sudden contraction entrance in order to simulate the inlet condition of the turbine blade cooling passages. The test channel was heated by thin stainless steel foils with a thickness of 0.000025 m, and instrumented with 180 thermocouples. The brass ribs of a square cross-section were glued periodically, in line, onto the top and bottom walls of the foil-heated channel in patterns to achieve the desired spacing and angle-of-attack. The local heat transfer coefficients on the smooth side and the ribbed side walls, at the channel entrance and the downstream regions, were measured for eight rib configurations and three Reynolds numbers (Re = 10,000, 30,000, and 60,000).

Han, J. C.↗
NASA NTRS1987

Local intermodal energy transfer of the secondary instability in a plane channel

A mathematical technique for analyzing local energy-transfer rates among wave-vector triads is developed and applied to the data generated by direct numerical simulations of waves with various types of initial conditions. Starting the simulation with a primary two-dimensional wave and random noise produced structures very similar to those which evolved from three-dimensional center modes. The local transfer rates determined in this case help to explain the eventual deformation of the primary two-dimensional wave which was observed in wind-tunnel experiments. Including weak streamwise vortices in the initial flow field results in large amounts of energy being transferred to the K-type modes early in the simulation. The later development of the waves (and hence the energy-transfer rates) is similar to the previous case.

Singer, Bart A.↗
NASA NTRS1987

Analysis of crossover between local and massive separation on airfoils

The occurrence of massive separation on airfoils operating at high Reynolds number poses an important problem to the aerodynamicist. In the present study, the phenomenon of crossover, induced by airfoil thickness, between local separation and massive separation is investigated for low speed (incompressible), symmetric flow past realistic airfoil geometries. This problem is studied both for the infinite Reynolds number asymptotic limit using triple-deck theory and for finite Reynolds number using interacting boundary-layer theory. Numerical results are presented which illustrate how the flow evolves from local to massive separation as the airfoil thickness is increased. The results of the triple-deck and the interacting boundary-layer analyses are found to be in qualitative agreement for the NACA four digit series and an uncambered supercritical airfoil. The effect of turbulence on the evolution of the flow is also considered. Solutions are presented for turbulent flows past a NACA 0014 airfoil and a circular cylinder. For the latter case, the calculated surface pressure distribution is found to agree well with experimental data if the proper eddy pressure level is specified.

Barnett, Mark↗
NASA NTRS1987

Local heat/mass transfer and pressure drop in a two-pass rib-roughened channel for turbine airfoil cooling

The heat transfer characteristics of turbulent air flow in a multipass channel were studied via the naphthalene sublimation technique. The naphthalene-coated test section, consisting of two straight, square channels joined by a 180 deg turn, resembled the internal cooling passages of gas turbine airfoils. The top and bottom surfaces of the test channel were roughened by rib turbulators. The rib height-to-hydraulic diameter ratio (e/D) were 0.063 and 0.094, and the rib pitch-to-height ratio (P/e) were 10 and 20. The local heat/mass transfer coefficients on the roughened top wall and on the smooth divider and side walls of the test channel were determined for three Reynolds numbers of 15, 30, and 60, thousand, and for three angles of attack (alpha) of 90, 60, and 45 deg. Results showed that the local Sherwood numbers on the ribbed walls were 1.5 to 6.5 times those for a fully developed flow in a smooth square duct. The average ribbed-wall Sherwood numbers were 2.5 to 3.5 times higher than the fully developed values, depending on the rib angle of attack and the Reynolds number. The results also indicated that, before the turn, the heat/mass transfer coefficients in the cases of alpha = 60 and 45 deg were higher than those in the case of alpha=90 deg. However, after the turn, the heat/mass transfer coefficients in the oblique-rib cases were lower than those in the transverse rib case. Correlations for the average Sherwood number ratios for individual channel surfaces and for the overall Sherwood number ratios are reported. Correlations for the fully developed friction factors and for the loss coefficients are also provided.

Han, J. C.↗
NASA NTRS1987

Suggested severe local storm operational scenario for GOES I-M

The GOES I-M satellite system is expected to provide continuous high resolution estimates of temperature and moisture profiles, winds from cloud motions, surface temperature, cloud properties, and precipitation for severe local storm and tropical cyclone events. The suggested operational schedule for the GOES I-M satellite emphasizes the observation frequencies, spatial coverage, spectral bands, etc. for the GOES I-M imager and sounder instruments that are expected to optimize the determination of the relevant meteorological parameters. During severe local storm events, the imager would be programmed to perform high frequency imaging (less than or= 3.5 min) for determining winds from cloud motions and for monitoring severe convection. In addition, the sounder would provide temperature and moisture profiles every hour over a 3000 X 3000 km domain during the antecedent stage or over a 1000 X 1000 km area every 10 minutes during the mature storm stage.

Shenk, William E.↗
NASA NTRS1988

Immunofluorescence localization of dissociation supernatant and extracellular matrix components in Lytechinus pictus sectioned embryos

Indirect immunofluorescence was used to localize specific extracellular components in embryos of the sea urchin Lytechinus pictus. Hyalin and S2 (a group of components found in the disaggregation supernatant from Strongylocentrotus purpuratus blastulae) were uniformly present at all stages (unfertilized up to 32 hr) except hyalin could not be detected at the 12 hour early blastula stage. Laminin was found in 16 cell, 32 cell, 6 hour, 18 hour, 24 hour, and 32 hour stages, with especially bright fluorescence at 18 hours. Collagen I was present at all stages (freshly fertilized up to 32 hour) except little was detected at 12 hours. Fibronectin was uniformly present in blastocoelar fibers stained with anto-collagen I and anti-fibronectin. These results were compared with those for S. purpuratus to produce an overview of the localization of specific extracellular matrix components during development of two species of sea urchins. The results set the stage for future studies that will examine the function of these components at the various developmental stages.

Garciaflack, Ana Leticia↗
NASA NTRS1987

Image reconstruction from multiple 1-D scans using filtered localized projection

The spatial resolution that can be attained using scanning linear arrays (consisting of discrete IR solid-state detectors) for image acquisition is considered, and a filtered local projection (FLP) method is described which efficiently combines all available scan information into one rectangular grid without the need for explicit interpolation. Mathematically, the FLP algorithm consists of a localized summation followed by an inverse-filter operation, and it has application to nonlinear restoring techniques. The present method is applied, using a linear array, to simulated data for staggered parallel scans and to multiple scan directions. Noise effects and limitations of the technique are also considered.

Frieden, B. Roy↗
NASA NTRS1988

Local crippling of thin-walled graphite-epoxy stiffeners

Results from an experimental and analytical study of the local buckling, postbuckling, and crippling (failure) behavior of channel, zee, and I- and J-section stiffeners made of AS4/3502 graphite-epoxy unidirectional tape are presented. Thirty-six specimens were tested in axial compression. Experimental results indicate the existence of a number of damage initiation modes, all of which involve either delamination in some part of the specimen or local material strength failure in a corner of the specimen. The flange width-to-thickness ratio is found to influence the mode of damage initiation. The inner corner radius strongly affects the crippling stress for the I- and J-section specimens, but was not found to have a significant effect on the crippling stress of channels and zees. Geometrically nonlinear analyses of five specimens were performed with the STAGS general purpose computer code. Correlation between analytical and experimental results is excellent through buckling, but agreement degrades in postbuckling. The discrepancies in postbuckling are attributed to neglect of transverse shearing deformations in the analysis and development of damage in the specimens. Hashin's compressive fiber mode failure criterion correlates reasonably well with the first major damage event in a first ply failure analysis.

Bonanni, David L.↗
NASA NTRS1988

Few-nanoradian deep space navigation in local reference frames

Angular navigation with Very Long Baseline Interferometry is performed at the 15-100 nanoradian level by differencing the interferometric delays of a spacecraft and nearby radio source. Clock rate, earth orientation and atmospheric effects limit the accuracy. By observing several radio sources along with the spacecraft, these dominant errors can be reduced by parameter estimation. Using improved instrumentation, the technique analyzed below, which can potentially yield 1-3 nanoradian accuracy, locates the spacecraft in a local reference frame of radio sources. In this paper, observation strategies and covariance results will be presented for the local reference frame technique. The error contributions of system noise and tropospheric fluctuations will be evaluated. An application of this few-nanoradian technique to Jovian approach is also presented.

Treuhaft, R. N.↗
NASA NTRS1988

Local-global analysis of crack growth in continuously reinforced ceramic matrix composites

The development is described of a mathematical model for predicting the strength and micromechanical failure characteristics of continuously reinforced ceramic matrix composites. The local-globe analysis models the vicinity of a propagating crack tip as a local heterogeneous region (LHR) consisting of spring like representation of the matrix, fibers and interfaces. This region is embedded in an anisotropic continuum (representing the bulk composite) which is modeled by conventional finite elements. Parametric studies are conducted to investigate the effects of LHR size, component properties, interface conditions, etc. on the strength and sequence of the failure processes in the unidirectional composite system. The results are compared with those predicted by the models developed by Marshall et al. (1985) and by Budiansky et al. (1986).

Ballarini, Roberto↗
NASA NTRS1988

Local position control: A new concept for control of manipulators

Resolved motion rate control is currently one of the most frequently used methods of manipulator control. It is currently used in the Space Shuttle remote manipulator system (RMS) and in prosthetic devices. Position control is predominately used in locating the end-effector of an industrial manipulator along a path with prescribed timing. In industrial applications, resolved motion rate control is inappropriate since position error accumulates. This is due to velocity being the control variable. In some applications this property is an advantage rather than a disadvantage. It may be more important for motion to end as soon as the input command is removed rather than reduce the position error to zero. Local position control is a new concept for manipulator control which retains the important properties of resolved motion rate control, but reduces the drift. Local position control can be considered to be a generalization of resolved position and resolved rate control. It places both control schemes on a common mathematical basis.

Kelly, Frederick A.↗
NASA NTRS1989

Relaminarization of turbulent flow on a flat plate by localized surface heating

Relaminarization of a turbulent boundary layer in air on a flat plate is demonstrated experimentally using localized surface heating. Localized heating is achieved by electrically heating a wire embedded in a thermally insulated substrate (Space Shuttle Tile) on the surface. The stability of the flow downstream of the applied control point increases with decreasing stream temperature in the flow direction. The mean and perturbation velocity profiles without control show that the flow is turbulent. With control, these profiles sequentially change from intermittently turbulent to a fully laminar state. In the relaminarization stage, the turbulent energy is dissipated by molecular transport due to viscous and conductivity mechanisms. The new profile adjusts to a lower Reynolds number based on the momentum thickness than that of the previous turbulent state.

Maestrello, Lucio↗
NASA NTRS1987

The local interstellar medium

The structure of the local interstellar medium is reviewed with emphasis on the new observations of the cold neutral component. The properties of the high latitude molecular clouds are discussed as well as their relationship to the 'infrared cirrus' and atomic gas. The molecular clouds are shown to lie preferentially along the loops and filaments of local H I gas, but a detailed examination shows the CO and H I peaks are offset from one another. An expansion velocity of 7 km/s is derived for one of the shells, suggesting an expansion energy of about 8 x 10 to the 47th ergs, which is somewhat smaller than that expected for a supernova explosion. If the pressure in the clumps of the high latitude clouds is in equilibrium with the surrounding gas, the pressure in the shells is 10,000-100,000/cu cm K, an order of magnitude higher than what is generally argued to exist in the interstellar medium.

Blitz, Leo↗
NASA NTRS1988

Local flow structures defined by kinematic events in isotropic turbulence

The spatial structure of turbulent motion in incompressible isotropic turbulence is investigated using a conditional average in which the conditional event specifies the local deformation tensor in addition to the local velocity vector. This average gives the best estimate of the flow field around a fixed point x given the kinematic state at x. Estimates are calculated for various kinematic states in isotropic turbulence, including pure translation, pure shear, plane strain, axisymmetric strain, and pure rotation. It is demonstrated that the large-scale motion is dominated by a vortex ring structure associated with the translational component, except at critical points of the velocity vector field.

Adrian, R. J.↗
NASA NTRS1989

Theory of local thermal instability in spherical systems

The gasdynamical properties of local thermal instability in optically thin astrophysical plasmas as it occurs in spherical accretion and winds is investigated. In a medium characterized by both thermal and hydrostatic equilibrium, if the cooling function is not an explicit function of position and does not display isentropic thermal instability, then isobaric thermal instability by the Field criterion is present if and only if convective instability is present by the Schwarzschild criterion. In this case, thermal overstability cannot occur. Convective instability by the Schwarzschild criterion will also occur in accretion flows locally dominated by external heating or in marginally unbound, radiatively cooling outflows. A very general Lagrangian equation for the development of nonradial thermal instability in flows with spherical symmetry is derived and is solved analytically in certain regimes. The results are applied to cluster X-ray cooling flows.

Balbus, Steven A.↗
NASA NTRS1989

Vertical, meridional, seasonal, and local time dependence of non-LTE effects in stratospheric NO and implications for infrared remote sensing

Calculations have been carried out on possible nonlocal thermodynamic equilibrium (non-LTE) effects previously suggested for stratospheric nitric oxide (NO) associated with the direct photochemical production of vibrationally excited NO by the processes NO2 + hv yields NO(v) + O and O + NO2 yields NO(v) + O2. The calculations, which make use of improved calculations of the NO vibrational state distribution from NO2 photolysis, are carried out as a function of altitude and latitude for a variety of seasons and local times. Non-LTE effects on the order of 30 percent for v = 1 are obtained, maximizing in the middle stratosphere over the equator. The results of the calculations suggest that incorporation of the non-LTE effect into the retrieval algorithm for NO from infrared thermal emission measuring instruments on the Upper Atmosphere Research Satellite will need to be done carefully if correct distributions and variations of NO with altitude, latitude, season, and local time are to be obtained.

Kaye, Jack A.↗