Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LHC PERFORMANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Measurement of top-quark pair production in association with charm quarks in proton–proton collisions at √s = 13 TeV with the ATLAS detector

Inclusive cross-sections or top-quark pair production in association with charm quarks are measured with proton-proton collision data at a center-of-mass energy of 13 TeV corresponding to an integrated luminosity of 140 fb -1 , collected with the ATLAS experiment at LHC between 2015 and 2018. The measurements are performed by requiring one or two charged leptons (electrons and muons), two b-tagged jets, and at least one additional jet in the final state. A custom flavor-tagging algorithm is employed for the simultaneous identification of b-jets and c-jets. In a fiducial phase space that replicates the acceptance of the ATLAS detector, the cross-sections for $t\bar{t}$ + ≥ 2c and $t\bar{t}$ + 1c production are measured to be $1.28^{+0.27}_{-0.24}$ pb and $6.4^{+1.0}_{-0.9}$ pb, respectively. The measurements are primarily limited by uncertainties in the modeling of inclusive $t\bar{t}$ and $t\bar{t}$ + $b\bar{b}$ production, in the calibration of the flavor-tagging algorithm, and by data statistics. Cross-section predictions from various $t\bar{t}$ simulations are largely consistent with the measured cross-section values, though all underpredict the observed values by 0.5 to 2.0 standard deviations. In a phase-space volume without requirements on the $t\bar{t}$ decay products and the jet multiplicity, the cross-section ratios of $t\bar{t}$ + ≥ 2c and $t\bar{t}$ + 1c to total $t\bar{t}$ + jets production are determined to be (1.23 ± 0.25)% and (8.8 ± 1.3)%.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Results of the 2015 testbeam of a 180 nm AMS High-Voltage CMOS sensor prototype

We investigated the active pixel sensors based on the High-Voltage CMOS technology as a viable option for the future pixel tracker of the ATLAS experiment at the High-Luminosity LHC. Our paper reports on the testbeam measurements performed at the H8 beamline of the CERN Super Proton Synchrotron on a High-Voltage CMOS sensor prototype produced in 180 nm AMS technology. These results in terms of tracking efficiency and timing performance, for different threshold and bias conditions, are shown.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Measurement of jet multiplicity distributions in t t-bar production in pp collisions at sqrt(s) = 7 TeV

The normalised differential top quark-antiquark production cross section is measured as a function of the jet multiplicity in proton-proton collisions at a centre-of-mass energy of 7 TeV at the LHC with the CMS detector. The measurement is performed in both the dilepton and lepton + jets decay channels using data corresponding to an integrated luminosity of 5.0 inverse femtobarns. Using a procedure to associate jets to decay products of the top quarks, the differential cross section of the t t-bar production is determined as a function of the additional jet multiplicity in the lepton + jets channel. Furthermore, the fraction of events with no additional jets is measured in the dilepton channel, as a function of the threshold on the jet transverse momentum. The measurements are compared with predictions from perturbative quantum chromodynamics and no significant deviations are observed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Forward–backward asymmetry of Drell–Yan lepton pairs in pp collisions at $\sqrt{s}$ = 8 TeV

A measurement of the forward-backward asymmetry $A_{\mathrm{FB}}$ of oppositely charged lepton pairs ($\mu\mu$ and $\mathrm{ ee } $) produced via $\mathrm{ Z }/\gamma^*$ boson exchange in pp collisions at $\sqrt{s} =$ 8 TeV is presented. The data sample corresponds to an integrated luminosity of 19.7 fb$^{-1}$ collected with the CMS detector at the LHC. The measurement of $A_{\mathrm{FB}}$ is performed for dilepton masses between 40 GeV and 2 TeV and for dilepton rapidity up to 5. As a result, the $A_{\mathrm{FB}}$ measurements as a function of dilepton mass and rapidity are compared with the standard model predictions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Searches for pair production of third-generation squarks in $\sqrt{s}=13$ $\,\text {TeV}$ pp collisions

Searches are presented for direct production of top or bottom squark pairs in proton–proton collisions at the CERN LHC. Two searches, based on complementary techniques, are performed in all-jet final states that are characterized by a significant imbalance in transverse momentum. An additional search requires the presence of a charged lepton isolated from other activity in the event. The data were collected in 2015 at a centre-of-mass energy of 13 $\,\text {TeV}$ with the CMS detector and correspond to an integrated luminosity of 2.3 $\,\text {fb}^{-1}$ . No statistically significant excess of events is found beyond the expected contribution from standard model processes. Exclusion limits are set in the context of simplified models of top or bottom squark pair production. Models with top and bottom squark masses up to 830 and 890 $\,\text {GeV}$ , respectively, are probed for light neutralinos. For models with top squark masses of 675 $\,\text {GeV}$ , neutralino masses up to 260 $\,\text {GeV}$ are excluded at 95% confidence level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for vector-like quarks in events with two oppositely charged leptons and jets in proton–proton collisions at $\sqrt{s} = 13\,\text {Te}\text {V} $

A search for the pair production of heavy vector-like partners $\mathrm {T}$ and $\mathrm {B}$ of the top and bottom quarks has been performed by the CMS experiment at the CERN LHC using proton–proton collisions at $\sqrt{s} = 13\,\text {Te}\text {V} $ . The data sample was collected in 2016 and corresponds to an integrated luminosity of 35.9 $\,\text {fb}^{-1}$ . Final states studied for $\mathrm {T} \overline{\mathrm {T}} $ production include those where one of the $\mathrm {T}$ quarks decays via $\mathrm {T} \rightarrow \mathrm {t}\mathrm {Z}$ and the other via $\mathrm {T} \rightarrow \mathrm {b}\mathrm {W}$ , $\mathrm {t}\mathrm {Z}$ , or $\mathrm {t}\mathrm {H} $ , where $\mathrm {H}$ is a Higgs boson. For the $\mathrm {B} \overline{\mathrm {B}} $ case, final states include those where one of the $\mathrm {B}$ quarks decays via $\mathrm {B} \rightarrow \mathrm {b}\mathrm {Z}$ and the other $\mathrm {B} \rightarrow \mathrm {t}\mathrm {W}$ , $\mathrm {b}\mathrm {Z}$ , or $\mathrm {b}\mathrm {H} $ . Events with two oppositely charged electrons or muons, consistent with coming from the decay of a $\mathrm {Z}$ boson, and jets are investigated. The number of observed events is consistent with standard model background estimations. Lower limits at 95% confidence level are placed on the masses of the $\mathrm {T}$ and $\mathrm {B}$ quarks for a range of branching fractions. Assuming 100% branching fractions for $\mathrm {T} \rightarrow \mathrm {t}\mathrm {Z}$ , and $\mathrm {B} \rightarrow \mathrm {b}\mathrm {Z}$ , $\mathrm {T}$ and $\mathrm {B}$ quark mass values below 1280 and 1130 $\,\text {Ge}\text {V}$ , respectively, are excluded.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the low-mass Drell-Yan differential cross section at s = 7 TeV using the ATLAS detector

CERN-LHC. The differential cross section for the process Z/gamma*->ll (l=e,mu) as a function of dilepton invariant mass is measured in pp collisions at sqrt(s) = 7 TeV at the LHC using the ATLAS detector. The measurement is performed in the e and mu channels for invariant masses between 26 GeV and 66 GeV using an integrated luminosity of 1.6 fb^-1 collected in 2011 and these measurements are combined. The analysis is extended to invariant masses as low as 12 GeV in the muon channel using 35 pb^-1 of data collected in 2010. The cross sections are determined within fiducial acceptance regions and corrections to extrapolate the measurements to the full kinematic range are provided. Next-to-next-to-leading-order QCD predictions provide a significantly better description of the results than next-to-leading-order QCD calculations, unless the latter are matched to a parton shower calculation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Research in Particle Physics

This is the final report for the Department of Energy Grant to Principal Investigators in Experimental and Theoretical Particle Physics at Boston University. The research performed was in the Energy Frontier at the LHC, the Intensity Frontier at Super-Kamiokande and T2K, the Cosmic Frontier and detector R&D in dark matter detector development, and in particle theory.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

ATLAS Large Scale Thin Gap Chambers

This is a technical scope of work (TSW) between the Fermi National Accelerator Laboratory (Fermilab) and the experimenters of the ATLAS sTGC New Small Wheel collaboration who have committed to participate in beam tests to be carried out during the FY2014 Fermilab Test Beam Facility program.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

FPGAs as a Service to Accelerate Machine Learning Inference [PowerPoint]

Large-scale particle physics experiments face challenging demands for high-throughput computing resources both now and in the future. New heterogeneous computing paradigms on dedicated hardware with increased parallelization, such as Field Programmable Gate Arrays (FPGAs), offer exciting solutions with large potential gains. The growing applications of machine learning algorithms in particle physics for simulation, reconstruction, and analysis are naturally deployed on such platforms. We demonstrate that the acceleration of machine learning inference as a web service represents a heterogeneous computing solution for particle physics experiments that requires minimal modification to the current computing model. As examples, we retrain the ResNet-50 convolutional neural network to demonstrate state-of-the-art performance for top quark jet tagging at the LHC, and apply a ResNet-50 model with transfer learning for neutrino event classification. Using Project Brainwave b y Microsoft to accelerate the ResNet-50 image classification model, we achieve average inference times of 60 (10) milliseconds with our experimental physics software framework using Brainwave as a cloud (edge or on-premises) service, representing an improvement by a factor of approximately 30 (175) in model inference latency over traditional CPU inference in current experimental hardware. A single FPGA service accessed by many CPUs achieves a throughput of 600--700 inferences per second using an image batch of one, comparable to large batch-size GPU throughput and significantly better than small batch-size GPU throughput. Deployed as an edge or cloud service for the particle physics computing model, coprocessor accelerators can have a higher duty cycle and are potentially much more cost-effective.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The CMS Phase 2 Outer Tracker Analyzer of Test Outputs - POTATO!

The Phase-2 upgrade of the Large Hadron Collider (LHC), also known as the High-Luminosity LHC (HL-LHC) is designed to achieve peak instantaneous luminosities which is about an order of magnitude higher than the nominal design value of $10^{34}~cm^{-2}s^{-1}$ delivering a total of atleast $3000 fb^{-1}$ data over 10 years of operation at $\sqrt{s}~=~14~TeV$. One crucial aspect of the CMS Phase-2 detector upgrade is the replacement of the existing tracking detector in order to deal with the extreme HL-LHC conditions, retaining and further expanding the physics performances achieved in the previous years. The outer part of the upgraded tracker (OT), will be equipped with over 13,000 macro Pixel-Strip (PS) and Strip-Strip (2S) modules! Module production is distributed across centers worldwide and necessitates coordinated efforts and standardized procedures. Along with production and assembly of the modules, Fermilab OT group is also working on a tool, Phase 2 Outer Tracker Analyzer of Test Outputs (POTATO) that will analyze, grade, upload and manage the large quantity of files to be stored in the centralized Database (DB). In this contribution a brief overview of the module testing and the power and dire need of POTATO to handle this large number of test outputs will be presented.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Summary of the LARP Mini-Workshop on Beam-Beam Compensation 2007

The LARP Mini-Workshop on Beam-Beam Compensation 2007 was held at SLAC, 2-4 July 2007. It was attended by 33 participants from 10 institutions in Asia, Europe, and America. 26 presentations were given, while more than one third of the time was allocated to discussions. The workshop web site is Ref. [1]. The workshop's main focus was on long-range and head-on beam-beam compensation, with a view towards application in the LHC. Other topics included the beam-beam performance of previous, existing and future circular colliders; beam-beam simulations; new operating modes, theory, and unexplained phenomena. This summary is also published as Ref. [2].

43 PARTICLE ACCELERATORS↗

The CMS Phase 2 Outer Tracker Analyzer of Test Outputs - POTATO!

The Phase-2 upgrade of the Large Hadron Collider (LHC), also known as the High-Luminosity LHC (HL-LHC) is designed to achieve peak instantaneous luminosities which is about an order of magnitude higher than the nominal design value of $10^{34}~cm^{-2}s^{-1}$ delivering a total of atleast $3000 fb^{-1}$ data over 10 years of operation at $\sqrt{s}~=~14~TeV$. One crucial aspect of the CMS Phase-2 detector upgrade is the replacement of the existing tracking detector in order to deal with the extreme HL-LHC conditions, retaining and further expanding the physics performances achieved in the previous years. The outer part of the upgraded tracker (OT), will be equipped with over 13,000 macro Pixel-Strip (PS) and Strip-Strip (2S) modules! Module production is distributed across centers worldwide and necessitates coordinated efforts and standardized procedures. Along with production and assembly of the modules, Fermilab OT group is also working on a tool, Phase 2 Outer Tracker Analyzer of Test Outputs (POTATO) that will analyze, grade, upload and manage the large quantity of files to be stored in the centralized Database (DB). In this contribution a brief overview of the module testing and the power and dire need of POTATO to handle this large number of test outputs will be presented.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Beam Losses and Background Loads on Collider Detectors Due to Beam-Gas Interactions in the LHC

With a fully-operational high-efficient collimation system in the LHC, nuclear interactions of circulating protons with residual gas in the machine beam pipe can be a major source of beam losses in the vicinity of the collider detectors, responsible for the machine-induced backgrounds. Realistic modeling of Coulomb scattering, elastic and inelastic interactions of 7-TeV protons with nuclei in the vacuum chamber of the cold and warm sections of the LHC ring--with an appropriate pressure profile--is performed with the STRUCT and MARS15 codes. Multi-turn tracking of the primary beams, propagation of secondaries through the lattice, their interception by the tertiary collimators TCT as well as properties of corresponding particle distributions at the CMS and ATLAS detectors are studied in great detail and results presented in this paper.

43 PARTICLE ACCELERATORS↗

Measurement of boosted Higgs bosons produced via vector boson fusion or gluon fusion in the H →$ \textrm{b}\overline{\textrm{b}} $ decay mode using LHC proton-proton collision data at $ \sqrt{s} $ = 13 TeV

A measurement is performed of Higgs bosons produced with high transverse momentum (p$_{T}$) via vector boson or gluon fusion in proton-proton collisions. The result is based on a data set with a center-of-mass energy of 13 TeV collected in 2016–2018 with the CMS detector at the LHC and corresponds to an integrated luminosity of 138 fb$^{−1}$. The decay of a high-p$_{T}$ Higgs boson to a boosted bottom quark-antiquark pair is selected using large-radius jets and employing jet substructure and heavy-flavor taggers based on machine learning techniques. Independent regions targeting the vector boson and gluon fusion mechanisms are defined based on the topology of two quark-initiated jets with large pseudorapidity separation. The signal strengths for both processes are extracted simultaneously by performing a maximum likelihood fit to data in the large-radius jet mass distribution. The observed signal strengths relative to the standard model expectation are $ {4.9}_{-1.6}^{+1.9} $ and $ {1.6}_{-1.5}^{+1.7} $ for the vector boson and gluon fusion mechanisms, respectively. A differential cross section measurement is also reported in the simplified template cross section framework.[graphic not available: see fulltext]

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Spin identification of graviton resonances in the process pp {sup {yields}}e{sup +}e{sup -} + X at the Large Hadron Collider (LHC)

Prospects for discovering heavy graviton resonances in decays to an electron-positron pair and for identifying the nature of these resonances in the ATLAS experiment at the Large Hadron Collider (LHC) are investigated. Gravitons in the Randall-Sundrum model, which features extra spatial dimensions, are considered by way of example. A comparative analysis of effects of new different-spin heavy resonances, scalar [supersymmetric neutrino (sneutrino)], vector (new gauge Z' boson), and tensor (graviton) ones, is performed in order to identify the graviton spin. An identification of gravitons is performed by using the integrated center-edge asymmetry. For LHC, the graviton discovery (identification) reach is found to be 2.1 TeV (1.2 TeV) and 3.9 TeV (2.9 TeV) at a confidence level of 5{delta} (95%) for the graviton coupling constants of k/bar M {sub Pl} = 0.01 and 0.1, respectively. This analysis is the most general, since, for the first time, it takes into account the possible existence of scalar resonances, which affects substantially quantitative estimates of the identification reach.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Multiple charm production at the LHC energy

Cross sections for J/{psi} mesons produced in association with open charm and two charmed hadrons from different cc-bar pairs under LHC conditions are predicted theoretically. The respective processes are considered both in single and in double parton interactions. Particular attention is given to kinematical limits of the LHCb detector, and a comparison with the most recent experimental data is performed for them.

74 ATOMIC AND MOLECULAR PHYSICS↗

Establishing the Quality Assurance programme for the strip sensor production of the ATLAS tracker upgrade including irradiation with neutrons, photons and protons to HL-LHC fluences

The successful pre-production delivery of strip sensors for the new Inner Tracker (ITk) for the upgraded ATLAS detector at the High Luminosity LHC (HL-LHC) at CERN was completed and based on their performance full production has commenced. The overall delivery period is anticipated to last 4 years to complete the approximately 22000 sensors required for the ITk. For Quality Assurance (QA), a number of test structures designed by the collaboration, along with a large area diode and miniature version of the main sensor, are produced in every wafer by the foundry Hamamatsu Photonics K.K (HPK). As well as Quality Control (QC) checks on every main sensor, samples of the QA pieces from each delivery batch are tested both before and after irradiation with results after exposure to neutrons, gammas or protons to fluences and doses corresponding to those anticipated after operation at the HL-LHC to roughly 1.5 times the ultimate integrated luminosity of 4000 fb -1 . In this paper the procedures are presented and the studies carried out to establish that the seven ITk QA Strip Sensor irradiation and test sites meet all the requirements to support this very extensive programme throughout the strip sensor production phase for the ITk project.

47 OTHER INSTRUMENTATION↗