Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LAVA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Galileo SSI Observations of Volcanic Activity at Tvashtar Catena, Io

Introduction: We report on the analysis of the Galileo SSI's observations of the volcanic activity at Tvashtar Catena, Io as discussed by Milazzo et al. Galileo's Solid State Imager (SSI) observed Tvashtar Catena (63 deg N, 120 deg W) four times between November 1999 and October 2001, providing a unique look at the distinctive high latitude volcanism on Io. The November 1999 observation spatially resolved, for the first time, an active extraterrestrial fissure eruption. The brightness temperature of the lavas at the November 1999 fissure eruption was 1300 K. The second observation (orbit I27, February 2000) showed a large (approx. 500 sq km) region with many, small spots of hot, active lava. The third observation was taken in conjunction with a Cassini observation in December 2000 and showed a Pele-like plume deposition ring, while the Cassini images revealed a 400 km high Pele-type plume above the Catena. The final Galileo SSI observation of Tvashtar was acquired in October 2001, and all obvious (to SSI) activity had ceased, although data from Galileo's Near Infrared Mapping Spectrometer (NIMS) indicated that there was still significant thermal emission from the Tvashtar region. We have concentrated on analyzing the style of eruption during orbit I27 (February 2000). Comparison with a lava flow cooling model indicates that the behavior of the Tvashtar eruption during I27 does not match that of "simple" advancing lava flows. Instead, it may be an active lava lake or a complex set of lava flows with episodic, overlapping (in time and space) eruptions.

Milazzo, M. P.↗

A Volcanic Origin for Sinuous and Branching Channels on Mars: Evidence from Hawaiian Analogs

Observations of sinuous and branching channels on planets have long driven a debate about their origin, fluvial or volcanic processes. In some cases planetary conditions rule out fluvial activity (e.g. the Moon, Venus, Mercury). However, the geology of Mars leads to suggestions that liquid water existed on the surface in the past. As a result, some sinuous and branching channels on Mars are cited as evidence of fluvial erosion. Evidence for a fluvial history often focuses on channel morphologies that are unique from a typical lava channel, for instance, a lack of detectable flow margins and levees, islands and terraces. Although these features are typical, they are not necessarily diagnostic of a fluvial system. We conducted field studies in Hawaii to characterize similar features in lava flows to better define which characteristics might be diagnostic of fluvial or volcanic processes. Our martian example is a channel system that originates in the Ascraeus Mons SW rift zone from a fissure. The channel extends for approx.300 km to the SE/E. The proximal channel displays multiple branches, islands, terraces, and has no detectable levees or margins. We conducted field work on the 1859 and 1907 Mauna Loa flows, and the Pohue Bay flow. The 51-km-long 1859 Flow originates from a fissure and is an example of a paired a a and pahoehoe lava flow. We collected DGPS data across a 500 m long island. Here, the channel diverted around a pre-existing obstruction in the channel, building vertical walls up to 9 m in height above the current channel floor. The complicated emplacement history along this channel section, including an initial a a stage partially covered by pahoehoe overflows, resulted in an appearance of terraced channel walls, no levees and diffuse flow margins. The 1907 Mauna Loa flow extends > 20 km from the SW rift zone. The distal flow formed an a a channel. However the proximal flow field comprises a sheet that experienced drainage and sagging of the crust following the eruption. The lateral margins of the proximal sheet, past which all lava flowed to feed the extensive channel, currently display a thickness of < 20 cm. Were this area covered by a dust layer, as is the Tharsis region on Mars, the margins would be difficult to identify. The Pohue Bay flow forms a lava tube. Open roof sections experienced episodes of overflow and spill out. In several places the resultant surface flows appear to have moved as sheet flows that inundated the preexisting meter scale features. Here the flows developed pathways around topographic highs, and in so doing accreted lava onto those features. The results are small islands within the multiple branched channels that display steep, sometimes overhanging walls. None of these features alone proves that the martian channel networks are the result of volcanic processes, but analog studies such as these are the first step towards identifying which morphologies are truly diagnostic of fluvial and volcanic channels.

Bleacher, Jacob E.↗

Comparison of Inflation Processes at the 1859 Mauna Loa Flow, HI, and the McCartys Flow Field, NM

Basaltic lavas typically form channels or tubes during flow emplacement. However, the importance of sheet flow in the development of basalt ic terrains received recognition over the last 15 years. George Walke r?s research on the 1859 Mauna Loa Flow was published posthumously in 2009. In this paper he discusses the concept of endogenous growth, or inflation, for the distal portion of this otherwise channeldominated lava flow. We used this work as a guide when visiting the 1859 flow to help us better interpret the inflation history of the McCartys flow field in NM. Both well preserved flows display similar clues about the process of inflation. The McCartys lava flow field is among the you ngest (approx.3000 yrs) basaltic lava flows in the continental United States. It was emplaced over slopes of <1 degree, which is similar to the location within the 1859 flow where inflation occurred. Although older than the 1859 flow, the McCartys is located in an arid environ ment and is among the most pristine examples of sheet flow morphologies. At the meter scale the flow surface typically forms smooth, undula ting swales that create a polygonal terrain. The literature for simil ar features includes multiple explanatory hypotheses, original breakouts from adjacent lobes, or inflation related upwarping of crust or sa gging along fractures that enable gas release. It is not clear which of these processes is responsible for polygonal terrains, and it is po ssible that one explanation is not the sole cause of this morphology between all inflated flows. Often, these smooth surfaces within an inflated sheet display lineated surfaces and occasional squeeze-ups alon g swale contacts. We interpret the lineations to preserve original fl ow direction and have begun mapping these orientations to better interpret the emplacement history. At the scale of 10s to 100s of meters t he flow comprises multiple topographic plateaus and depressions. Some depressions display level floors with surfaces as described above, while some are bowl shaped with floors covered in broken lava slabs. Th e boundaries between plateaus and depressions are also typically smoo th, grooved surfaces that have been tilted to angles sometimes approaching vertical. The upper margin of these tilted surfaces displays lar ge cracks, sometimes containing squeeze-ups. The bottom boundary with smooth floored depressions typically shows embayment by younger lavas. It appears that this style of terrain represents the emplacement of an extensive sheet that experiences inflation episodes within prefer red regions where lateral spreading of the sheet is inhibited, thereby forming plateaus. Depressions are often the result of non-inflation and can be clearly identified by lateral squeeze-outs along the pit walls that form when the rising crust exposes the still liquid core of the sheet. Our current efforts are focused on.

Bleacher, Jacob E.↗

Mare basin filling on the moon - Laboratory simulations

Laboratory simulations of lavas filling a stylized lunar multi-ringed basin demonstrate several relationships between the morphology of the emplaced lavas and various eruption conditions. The rate of effusion is the primary control on the gross shape of the accumulated lavas, with relatively low rates (e.g., Hawaiian style) leading to shield volcanoes and high rates (e.g., flood eruptions) producing flat, ponded lavas. Pre-flow topography can have a significant effect on the general form of individual flows and the position of flow features such as lava channels. Rootless vents develop in many parts of the flow, including areas apparently related to the position of basin rings, giving the false appearance of aligned true vent systems.

Greeley, R.↗

Volcanism in Elysium Planitia, Mars

Geomorphic mapping revealed that the three volcanic constructs within Elysium Planitia (Hecates Tholus, elysium Mons and Albor Tholus) are very different in their overall morphology and represent three distinct types of martian volcano. Hecates Tholus was found to possess the most likely possible example of a young, explosively generated, air fall deposit, while the volume of magma erupted from Elysium Mons appears to have been orders of magnitude larger than that erupted from Albor Tholus. A primary aim of the regional geological analysis of Elysium Planitia is to further understand the volcanic and tectonic evolution of the area by the identification and interpretation of individual lava flows and their source vents. Lava flow size, spatial distribution, flow direction and the stratigraphic relationships of these lava flows to adjacent structural features were all measured. The topographic form of Elysium Mons has totally controlled the flow direction of lava flows within Elysium Planitia. Lava flows from Elysium Mons can be traced for distances of 150 to 250 km in a radial direction from the volcano. Parasitic vents located beyond the recognizable volcanic construct also conform to this radial pattern. A second unusual characteristic of the Elysium Planitia region is the high frequency of occurrence of sinuous channels that are morphologically similar to lunar sinuous rilles.

Mouginis-Mark, P. J.↗

What are the best radar wavelengths, incidence angles and polarizations for geologic applications? A statistical approach

Linear discriminant analysis of multifrequency and multipolarization radar scatterometer data of lava flows and sedimentary rocks indicates that the lava flows can be separated by age and the sedimentary rocks can be discriminated from one another. The optimum wavelengths, polarizations and incidence angles among those available for these problems was determined by the discriminant analysis program. For separation of the lava flows, shorter wavelengths, smaller incidence angles and horizontal polarization are best. A SIR-C radar configuration could provide nearly complete discrimination of these lava flows. Conversely, the longer wavelengths, larger incidence angles and vertical polarization was preferred for sedimentary rocks, perhaps due to the slight vegetation cover. Satisfactory classification of sedimentary rocks requires more radar data than for the lavas. These results are potentially useful both for radar system configuration and for geological applications. The method developed here may provide a rationale for user specification of imaging system parameters.

Blom, R.↗

Reply

Treiman (this issue) argues that the melting temperature of carbonatite used by Gregg and Greeley (1993) is too low, and that values presented for other thermophysical properties for carbonatite lava are more appropriate for carbonatite rock. With the exception of the mechanical solidification temperature, values presented by Gregg and Greeley (1993) were taken directly, or calculated, from values presented within the works by Dawson et al. (1990) and Keller and Krafft (1990). Because a mechanical solidification temperature for carbonatite lavas was not presented in those works, we estimated one based on extrusion temperature, Venusian surface pressure, and the temperatures measured in cooling carbonatite lava lakes. We have reexamined values shown for properties of carbonatite lavas used by Gregg and Greeley (1993), and concur that Treiman's arguments (Treiman, this issue) are valid. Here, we present results of analyses described in Gregg and Greeley 1993, using values for the properties of carbonatite lavas obtained from Treiman and Schedl (1983) and Norton and Pinkerton (1990).

Gregg, Tracy K. P.↗

Studies In Planetary Volcanology

Modeling and field studies of the potential for flowing lavas to erode the terrain over which they pass: this study involved numerical solutions for the heat transfer, and analysis of lava flows on Earth where erosion appears to have taken place, coupled with observations of active flows in Hawaii. The conclusion is that some basaltic lava flows are capable of both thermal erosion (melting) and mechanical erosion, depending on the composition and structure of the pre-flow terrain. The case of high-temperature komatiite flows was also considered, especially as a potential analog for some of the flows on the moon of Jupiter, Io. 2. Application of modeling studies and field investigations to extraterrestrial cases: this aspect involved an analysis of lava flows on the Moon, considerations of the 1997 eruption observed via spacecraft (Galileo) on to, and a general review of volcanism on Mars. 3. Considerations of the interaction of lava flows and water: this aspect of the investigation involved a numerical analysis and incorporation of field studies in Iceland where such features occur; the final part of this study was to apply the results to Mars.

Greeley, Ronald↗

Evaluation of Sulfur Flow Emplacement on Io from Galileo Data and Numerical Modeling

Galileo images of bright lava flows surrounding Emakong Patera have bee0 analyzed and numerical modeling has been performed to assess whether these flows could have resulted from the emplacement of sulfur lavas on Io. Images from the solid-state imaging (SSI) camera show that these bright, white to yellow Emakong flows are up to 370 km long and contain dark, sinuous features that are interpreted to be lava conduits, -300-500 m wide and >lo0 km lorig. Neiu-Infrared Mapping S estimate of 344 K f 60 G131'C) within the Bmakong caldera. We suggest that these bright flows likely resulted from either sulfur lavas or silicate lavas that have undergone extensive cooling, pyroclastic mantling, and/or alteration with bright sulfurous materials. The Emakoag bright flows have estimated volume of -250-350 km', similar to some of the smaller Columbia River Basalt flows, If the Emakong flows did result from effusive sulfur eruptions, then they are orders of magnitude reater in volume than any terrestrial sulfur flows. Our numerical modeling capable of traveling tens to hundreds of kilometers, consistent with the predictions of Sagan. Our modeled flow distances are also consistent with the measured lengths of the Emakong channels and bright flows.

Williams, David A.↗

Validation and Analysis of SRTM and VCL Data Over Tropical Volcanoes

The focus of our investigation was on the application of digital topographic data in conducting first-order volcanological and structural studies of tropical volcanoes, focusing on the Java, the Philippines and the Galapagos Islands. Kilauea volcano, Hawaii, served as our test site for SRTM data validation. Volcanoes in humid tropical environments are frequently cloud covered, typically densely vegetated and erode rapidly, so that it was expected that new insights into the styles of eruption of these volcanoes could be obtained from analysis of topographic data. For instance, in certain parts of the world, such as Indonesia, even the regional structural context of volcanic centers is poorly known, and the distribution of volcanic products (e.g., lava flows, pyroclastic flows, and lahars) are not well mapped. SRTM and Vegetation Canopy Lidar (VCL) data were expected to provide new information on these volcanoes. Due to the cancellation of the VCL mission, we did not conduct any lidar studies during the duration of this project. Digital elevation models (DEMs) such as those collected by SRTM provide quantitative information about the time-integrated typical activity on a volcano and allow an assessment of the spatial and temporal contributions of various constructional and destructional processes to each volcano's present morphology. For basaltic volcanoes, P_c?w!m-d and Garbed (2000) have shown that gradual slopes (less than 5 deg.) occur where lava and tephra pond within calderas or in the saddles between adjacent volcanoes, as well as where lava deltas coalesce to form coastal plains. Vent concentration zones (axes of rift zones) have slopes ranging from 10 deg. to 12 deg. Differential vertical growth rates between vent concentration zones and adjacent mostly-lava flanks produce steep constructional slopes up to 40". The steepest slopes (locally approaching 90 deg.) are produced by fluvial erosion, caldera collapse, faulting, and catastrophic avalanches, all of which are usually identifiable. Due to the delay in the release of the SRTM data following the February 2000 flight, a significant part of our effort was devoted to the analog studies of the SRTM topographic data using topographic data from airborne interferometric radars. As part of the original SRTM Science Team, we proposed four study sites (Kilauea, Hawaii; Mt. Pinatubo, Philippines; Cerro Am1 and Femandina volcanoes, Galapagos Islands; and Tengger caldera, Java) where we could conduct detailed geologic studies to evaluate the uses of SRTM data for the analysis of lava flows, lahars, erosion of ash deposits, and an evaluation of the structural setting of the volcanoes. Only near the end of this project was one of these SRTM Science Team products (Luzon Island, the Philippines) released to the community, and we only had limited time to work on these data.

Mouginis-Mark, Peter J.↗

Os-186 and Os-187 Enrichments and High-He-3/He-4 sources in the Earth's Mantle: Evidence from Icelandic Picrites

Picrites from the neovolcanic zones in Iceland display a range in Os-187/Os-188O from 0.1297 to 0.1381 ((gamma)Os = 0.0 to 6.5) and uniform Os-186/Os-188 of 0.1198375+/-32 (2 (sigma)). The value for Os-186/Os-188 is within uncertainty of the present-day value for the primitive upper mantle of 0.1198398+/-16. These Os isotope systematics are best explained by ancient recycled crust or melt enrichment in the mantle source region. If so, then the coupled enrichments displayed in Os-186/Os-188 and Os-187/Os-188 from lavas of other plume systems must result from an independent process, the most viable candidate at present remains core-mantle interaction. While some plumes with high He-3/He-4, such as Hawaii, appear to have been subjected to detectable addition of Os (and possibly He) from the outer core, others such as Iceland do not. A positive correlation between Os-187/Os-188 and He-3/He-4 from 9.6 to 19 RA in Iceland picrites is best modeled as mixtures of 500 Ma or older ancient recycled crust mixed with primitive mantle, creating a hybrid source region that subsequently mixes with the convecting MORB mantle during ascent and melting. This multistage mechanism to explain these isotope systematics is consistent with ancient recycled crust juxtaposed with more primitive, relatively He-rich mantle, in convective isolation from the upper mantle, most likely in the lowermost mantle. This is inconsistent with models that propose random mixing between heterogeneities in the convecting upper mantle as a mechanism to explain the observed isotopic variation in oceanic lavas or models that produce a high He-3/He-4 signature in melt depleted and strongly outgassed, He-poor mantle. Instead these systematics require a deep mantle source to explain the 3He/4He signature in Iceland lavas. The He-3/He-4 of lavas derived from the Iceland plume changed over time, from a maximum of 50 RA at 60 Ma, to approximately 25-27 RA at present. The changes are coupled with distinct compositional gaps between the different aged lavas when H-3/He-4 is plotted versus various geochemical parameters such as Nd-143/Nd-144 and La/Sm. These relationships can be interpreted as an increase in the proportion of ancient recycled crust in the upwelling plume over this time period.

Brandon, Alan D.↗

FINESSE: Field Investigations to Enable Solar System Science and Exploration

The FINESSE (Field Investigations to Enable Solar System Science and Exploration) team is focused on a science and exploration field-based research program aimed at generating strategic knowledge in preparation for the human and robotic exploration of the Moon, near-Earth asteroids (NEAs) and Phobos and Deimos. We follow the philosophy that "science enables exploration and exploration enables science." 1) FINESSE Science: Understand the effects of volcanism and impacts as dominant planetary processes on the Moon, NEAs, and Phobos & Deimos. 2) FINESSE Exploration: Understand which exploration concepts of operations (ConOps) and capabilities enable and enhance scientific return. To accomplish these objectives, we are conducting an integrated research program focused on scientifically-driven field exploration at Craters of the Moon National Monument and Preserve in Idaho and at the West Clearwater Lake Impact Structure in northern Canada. Field deployments aimed at reconnaissance geology and data acquisition were conducted in 2014 at Craters of the Moon National Monument and Preserve. Targets for data acquisition included selected sites at Kings Bowl eruptive fissure, lava field and blowout crater, Inferno Chasm vent and outflow channel, North Crater lava flow and Highway lava flow. Field investigation included (1) differential GPS (dGPS) measurements of lava flows, channels (and ejecta block at Kings Bowl); (2) LiDAR imaging of lava flow margins, surfaces and other selected features; (3) digital photographic documentation; (4) sampling for geochemical and petrographic analysis; (5) UAV aerial imagery of Kings Bowl and Inferno Chasm features; and (6) geologic assessment of targets and potential new targets. Over the course of the 5-week field FINESSE campaign to the West Clearwater Impact Structure (WCIS) in 2014, the team focused on several WCIS research topics, including impactites, central uplift formation, the impact-generated hydrothermal system, multichronometer dating of impact products, and using WCIS as an analog test site for crew studies of sampling protocols. The FINESSE team visited and mapped all of the major islands within West Clearwater Lake. Excellent cliff exposures around the coasts of many of the islands allowed a general stratigraphy of impactites to be defined. Notable differences to previous work includes the discovery of a monomict lithic breccia and a medium to coarse grained impact melt rock. In addition, ample rock samples were returned from West Clearwater for geochronology study. Geochronology work centers around laboratory analyses of these samples (and samples collected in the future or obtained from archives housed at the Canadian Geological Survey). Samples returned from the FINESSE field season have been evaluated for suitability for geochronologic analysis, and selected samples have been crushed for mineral separation and/or sawed for the preparation of polished petrologic thin sections. Heavy minerals (e.g., zircon, titanite, and apatite) will be separated from the crushed material for (U-Th)/He geochronology. The sections will be used for laser ablation 40Ar/39Ar research after neutron irradiation. This presentation will highlight the exciting science and exploration work conducted by FINESSE, as well as future plans for continued research.

Phobos & Deimos↗

Terrestrial Analogues for Lunar Impact Melt Flows

Lunar impact melt deposits have unique physical properties. They have among the highest observed radar returns at S-Band (12.6 cm wavelength), implying that they are rough at the decimeter scale. However, they are also observed in high-resolution optical imagery to be quite smooth at the meter scale. These characteristics distinguish them from well-studied terrestrial analogues, such as Hawaiian pahoehoe and ʻa ʻa lava flows. The morphology of impact melt deposits can be related to their emplacement conditions, so understanding the origin of these unique surface properties will help to inform us as to the circumstances under which they were formed. In this work, we seek to find a terrestrial analogue for well-preserved lunar impact melt flows by examining fresh lava flows on Earth. We compare the radar return and high-resolution topographic variations of impact melt flows to terrestrial lava flows with a range of surface textures. The lava flows examined in this work range from smooth Hawaiian pahoehoe to transitional basaltic flows at Craters of the Moon (COTM) National Monument and Preserve in Idaho to rubbly and spiny pahoehoe-like flows at the recent eruption at Holuhraun in Iceland. The physical properties of lunar impact melt flows appear to differ from those of all the terrestrial lava flows studied in this work. This may be due to (a) differences in post-emplacement modification processes or (b) fundamental differences in the surface texture of the melt flows due to the melts' unique emplacement and/or cooling environment. Information about the surface properties of lunar impact melt deposits will be critical for future landed missions that wish to sample these materials.

Earth↗

Timescales of mafic magmatic fractionation documented by paleosecular variation in basaltic drill core, Snake River Plain volcanic province, Idaho, USA

Abstract The timescales over which fractional crystallization and recharge work in mafic volcano-plutonic provinces is subject to great uncertainty. Currently modeled processes are subject to the scale of measurement: monogenetic basaltic fields accumulate over hundreds of thousands of years, consistent with U-Th-Ra isotopic variations that imply 50% crystallization of basic magmas on timescales of 100,000 years or more, whereas crystal diffusion modeling implies phenocryst residence times of ~1–1000 years. Monogenetic basalts of the Snake River Plain in southern Idaho, USA, are up to 2 km thick and postdate passage over the Yellowstone–Snake River Plain hotspot. Detailed lithologic and geophysical logging of core from deep drill holes, along with chemical stratigraphy and high-resolution paleomagnetic inclination measurements, document individual eruptive units, compound lava flows, and basaltic flow groups that accumulated over 1–6 m.y. Hiatuses are commonly marked by loess or fluvial interbeds that vary from ~0.1 m thick to 20 m thick. Radiometric (40Ar-39Ar, detrital zircon U-Pb) and paleomagnetic timescale ages show that the deepest hole (Kimama drill hole, 1912 m total depth) accumulated over ~6 m.y. Cycles of fractional crystallization and recharge are recognized in the chemical stratigraphy as up-section shifts in major and trace elements; these fractionation cycles commonly represent 40%–50% fractionation. Individual fractionation cycles may comprise 20–40 eruptive units (8–17 lava flows) with little to no change in paleomagnetic inclination (0°–1°), whereas adjacent cycles may differ by several degrees from one another or reflect changes in polarity. Rates of paleosecular variation in Holocene lavas and sediments dated using 14C document significant shifts in magnetic inclination over short timescales, ranging from ~0.05° to 2°/decade, with an average of ~0.5°/decade and a minimum rate of 0.05°/decade. This implies that fractionation cycles with ≤1° variation in magnetic inclination formed on timescales of a few decades up to a few centuries (20–200 years). Thus, the lavas collectively represent only a few thousand years of eruptive activity, with major flow groups separated in time by tens to hundreds of thousands of years. We suggest that the rates defined by paleosecular variation capture the timescales of magmatic chamber evolution (fractionation/recharge) in the seismically imaged mid-crustal sill complex; in contrast, we suggest that crystal diffusion modeling captures the residence times in shallow subvolcanic magmatic chambers that underlie individual monogenetic volcanoes.

Geology↗

Satellite geological and geophysical remote sensing of Iceland

The author has identified the following significant results. The ERTS imagery has sufficient resolution to map, from MSS color composites, areas of altered ground caused by high temperature geothermal activity at the Namafjall, Torfajokull, and Reykjanes geothermal areas. The major axes of the fallout pattern of tephra from the May - July 1970 volcanic eruption from Hekla Volcano can be mapped where sufficient depth of deposition was present to seriously affect the normal vegetation. Lava flows from the 1961 volcanic eruption at Askja; some of the lava flows from the 1947-48 eruption, and and all of the lava flows from the 1970 eruption at Hekla; and the areas covered by tephra and lava from the 1973 eruption on Heimaey could be delineated. Low sun angle imagery of less than 10 deg of snow covered terrain was particularly valuable in mapping structural and volcanic features concealed beneath glacial ice in the active volcanic zones of Iceland.

Williams, R. S., Jr.↗

Late-stage summit activity of Martian shield volcanoes

The preservation of morphologically fresh lava flows which pre-date the most recent episodes of caldera collapse at the summits of Ascraeus, Arsia and Olympus Montes indicates that explosive eruptions were not associated with this stage of Tharsis shield volcanism. The existence of resurfaced floor segments, complex wrinkle ridges, and lava terraces within the summit craters suggests that lava lakes comprised the dominant form of the intra-caldera activity. Multiple collapse episodes on Ascraeus and Olympus Montes are indicated by the nested summit craters. The most plausible cause of caldera collapse appears to be large-scale sub-terminal effusive activity, which is corroborated by the previously recognized existence of large lava flows on the flanks of these volcanoes. Due to the implied sequence of large-scale explosive (silicic) volcanism followed by effusive (basaltic) activity, it appears highly unlikely that ignimbrites or other forms of pyroclastic flows (previously proposed as possible deposits within the Olympus Mons aureole material) were ever erupted from the Tharsis Montes.

Mouginis-Mark, P. J.↗

The geologic history of quartz-normative and olivine-normative basalts in the vicinity of Hadley Rille (Apollo 15)

The geologic history of the quartz normative (QNB) and olivine normative (ONB) basalt types at Hadley Rille are discussed. A model for the geology of the mare basalts was constructed from a combination of field observations, sample chemistry, sample petrology and personal bias from terrestrial experience. The model proposes that the QNBs are the only mare lava type that is present as outcrop in the area traversed by the astronauts during the Apollo 15 mission. The returned QNB samples formed during a single eruptive phase of the Hadley Rille lava tube system. The ONB lavas are an exotic component transported to the site by a cratering event, or the ONBs are samples excavated from older are bedrock that was partly covered by the QNB lavas.

Grove, T. L.↗

Estimates of rheologic properties for flows on the Martian volcano Ascraeus Mons

Morphological measurements on six well-defined volcanic flows near the summit of the Martian volcano Ascraeus Mons were used to calculate the yield strength and viscosity of the lavas. The results are similar to values obtained for flows on other Martian and terrestrial shield volcanoes. Calculated viscosities are generally higher than measured viscosities for basaltic lavas but considerably smaller than rhyolite or dacite viscosities. The estimated rheologic properties of the Martian flows are most consistent with basaltic or basaltic andesite lavas, but some individual flows could consist of more evolved lavas.

Zimbelman, J. R.↗