Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Inclusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Inclusion of specular reflectance in vegetative canopy models

A detailed comparison of the observed soybeans and corn canopy reflectance with that calculated from three vegetative canopy reflectance models have shown systematic angular deviations. A likely cause of these effects is noninclusion of leaf specular reflectance. In this paper a formulation to calculate the component of canopy specular reflectance as a function of incident solar and view zenith angles, leaf area index, leaf angle distribution, and leaf specular reflectance has been developed. The SAIL model has been modified to include this component and the results are compared with an extensive observational data set on soybeans. It is shown that the systematic differences between the SAIL model and observations dependent on scattering azimuth are removed. An analysis of variance shows model improvement of 30 percent over the uncorrected SAIL model.

Reyna, E.↗

Thermal regimes in the detachment fault environment as deduced from fluid inclusions

Extensional tectonism, which dominates middle- and late-Tertiary geology in western Arizona, southeastern California, and southern Nevada, is characterized by normal regionally extensive, low-angle detachment faults. The decollement movement of Fupper plate rocks relative to lower plate assemblages created extensive zones of dilatency, including synthetic and antithetic listric normal faults, tear faults, tectonic crush breccias, shatter breccias, and gash veins in lithologic units above and below the detachment. The tectonically enhanced permeability above and below the detachment fault permitted mass migration of large volumes of hydrothermal solutions along the fault zone during and following upper plate movement. Major quantities of MgO, CaO, K2O, FeO/Fe2O3, SiO2 and CO2 were added to rocks in and near the detachment and related structures. Also introduced were varying amounts of trace elements including Mn, Cu, S, Mo, Ba, Au, Pb, Zn, U and/or Ag. Minerals containing fluid incusions were collected from all of these loci at locations in detachment faulted terranes in western Arizona and southeastern California.

Beane, R. E.↗

Inclusion of elastically connected members in exact buckling and frequency calculations

A standard stiffness matrix procedure which permits any combination of rigid, elastic, pinned or sliding connections of the degrees of freedom at the ends of a member to the nodes of its parent structure is described, in order to show how easily it can be extended to allow an existing algorithm to be used to ensure that no eigenvalues of the parent structure can be missed even when 'exact' member theory is used. The eigenvalues are the natural frequencies of undamped free vibration analyses or the critical load factors of buckling problems. The method preserves the exactness of the member theory and an efficient method for computer application is indicated. The theory also permits any combination of rigid, elastic, pinned or sliding connections between the freedoms of a substructure and those of its parent structure.

Williams, F. W.↗

Self-consistent inclusion of space-charge in the traveling wave tube

It is shown how the complete field of the electron beam may be incorporated into the transmission line model theory of the traveling wave tube (TWT). The fact that the longitudinal component of the field due to the bunched beam is not used when formulating the beam-to-circuit coupling equation is not well-known. The fundamental partial differential equation for the traveling wave field is developed and compared with the older (now standard) one. The equation can be solved numerically using the same algorithms, but now the coefficients can be updated continuously as the calculation proceeds down the tube. The coefficients in the older equations are primarily derived from preliminary measurements and some trial and error. The newer coefficients can be found by a recursive method, since each has a well defined physical interpretation and can be calculated once a reasonable first trial solution is postulated. The results of the new expression were compared with those of the older forms, as well as to a field theory model to show the ease in which a reasonable fit to the field prediction is obtained. A complete summary of the existing transmission line modeling of the TWT is given to explain the somewhat vague ideas and techniques in the general area of drifting carrier-traveling circuit wave interactions. The basic assumptions and inconsistencies of the existing theory and areas of confusion in the general literature are examined and hopefully cleared up.

Freeman, Jon C.↗

Partial spline models for the inclusion of tropopause and frontal boundary information in otherwise smooth two- and three-dimensional objective analysis

A new method, based on partial spline models, is developed for including specified discontinuities in otherwise smooth two- and three-dimensional objective analyses. The method is appropriate for including tropopause height information in two- and three-dimensinal temperature analyses, using the O'Sullivan-Wahba physical variational method for analysis of satellite radiance data, and may in principle be used in a combined variational analysis of observed, forecast, and climate information. A numerical method for its implementation is described and a prototype two-dimensional analysis based on simulated radiosonde and tropopause height data is shown. The method may also be appropriate for other geophysical problems, such as modeling the ocean thermocline, fronts, discontinuities, etc.

Shiau, Jyh-Jen↗

Inclusion of electron correlation for the target wave function in low- to intermediate-energy e-N2 scattering

In a recent calculation, an exact exchange method was developed for use in the partial-differential-equation approach to electron-molecule scattering and was applied to e-N2 scattering in the fixed-nuclei approximation with an adiabatic polarization potential at low energies (0-10 eV). Integrated elastic cross sections were calculated and found to be lower than experiment at energies both below and above the Pi(g) resonance. It was speculated at that time that improved experimental agreement could be obtained if a correlated target representation were used in place of the uncorrelated one. The present paper implements this suggestion and demonstrates the improved agreement. These calculations are also extended to higher energies (0-30 eV) so asd to include the Sigma(u) resonance. Some discrepancies among the experiments and between experiment and the various calculations at very low energy are noted.

Weatherford, C. A.↗

Geocoronal structure. II - Inclusion of a magnetic dipolar plasmasphere

Calculations of exospheric quantities (hydrogen atom density, satellite atom fractional density, kinetic temperature, and escape flux) at locations along the earth-sun axis in the noon and midnight directions have been extended to incorporate a plasmasphere characterized by a dipolar shape and an empirical temperature profile. This interaction, evaluated with parameter values corresponding to low-to-moderate solar conditions, results in an increased density at outer geocoronal positions; the effect is not dramatic, though, and the resulting exosphere mimics the evaporative case closely, in spite of the control of trajectory parcel content by charge exchange collisions. A careful discussion of the handling of plasmaspheric charge exchange collisions and solar ionization is included, and the effect on the exospheric kinetic distribution is analyzed in terms of pertinent examples.

Bishop, James↗

Isotopic studies of Mg, Fe, Mo, Ru and W in Fremdlinge from Allende refractory inclusions

This paper presents the first isotopic measurements, made with an ion microprobe, of Mg, Fe, Mo, Ru, and W in Fremdlinge and refractory metal nuggets from Allende meteorite. No non-mass-dependent deviations exceeding 1 percent from normal solar isotopic abundances were found for any of the elements analyzed, despite the unusual mineralogy of Fremdlinge and the extreme enrichment in refractory siderophile elements. It is concluded that the chemical, petrologic, and isotopic data on Fremdlinge are most plausibly interpreted in terms of the origin of Fremdlinge within the solar nebula.

Hutcheon, Ian D.↗

The inclusion of semi-Markov reconfiguration transitions into the computer-aided Markov evaluator (CAME) program

The modifications to the rule-based CAME program which allow it to more accurately model the fault-handling processes of fault-tolerant systems are described. This new capability is added to the CAME program by modeling the fault-handling processes of fault-tolerant systems. The integrated airframe/propulsion control system architecture (IAPSA II) reference configuration currently under development is detailed.

Rosch, Gene↗

Inclusion of filter modulation in synthetic-discriminant-function construction

A technique in which the filter modulation is included in the synthesis of a synthetic-discriminant-function (SDF) matched spatial filter is presented. In the filter synthesis, a system of simultaneous nonlinear equations is solved with an iteration procedure. A computer simulation of the new method using thresholded images of the Space Shuttle over a range of aspect angles was performed for phase-only filters (POFs) and binary-phase-only filters (BPOFs). The filters constructed are capable of obtaining the specified peak-correlation response to within 1 percent with a high signal-to-clutter-ratio for the one-class problem, the two-class problem, and the multilevel problem. In contrast, conventional projection SDF POFs and BPOFs are unable to produce the desired peak-correlation response.

Jared, David A.↗

One-jet inclusive cross section at order a(s)-cubed - Gluons only

A complete calculation of the hadron jet cross-section at one order beyond the Born approximation is performed for the simplified case in which there are only gluons. The general structure of the differences from the lowest-order cross-section are described. This step allows two important improvements in the understanding of the theoretical hadron jet cross-section: first, the cross section at this order displays explicit dependence on the jet cone size, so that explicit account can be taken of the differences in jet definitions employed by different experiments; second, the magnitude of the uncertainty of the theoretical cross-section due to the arbitrary choice of the factorization scale has been reduced by a factor of two to three.

Ellis, Stephen D.↗

Zinc isotope anomalies in Allende meteorite inclusions

The isotopic compositions of Zn, Cr, Ti, and Ca have been measured in a number of CAIs from the Allende meteorite. The aim was to test astrophysical models which predict large excesses of Zn-66 to accompany excesses in the neutron-rich isotopes of Ca, Ti, Cr, and Ni. Some of the CAIs show clearly resolved but small excesses for Zn-66 which are at least an order of magnitude smaller than predicted. This result may simply reflect the volatility and chemical behavior of Zn as compared to the other (more refractory) anomalous elements found in these samples. Alternatively, revision of parameters and assumptions used for the model calculations may be required.

Loss, R. D.↗

The inclusion of higher degree and order gravity terms in the design of a repeat ground track orbit

Mean Orbit Elements can be chosen such that a desired ground track repeat criteria is obtained when propagating with the secular effects of a central body gravity field. If the proper initial conditions are chosen that correspond to these Mean Elements, the orbit can also be propagated with the full gravity field and form another ground track repeat pattern. Further, if the effects of other perturbative forces are compensated for, such that the ground track remains near this pattern, the central body effects can again be considered repetitive. The process of arriving at these conclusions, along with the supporting numerical simulations, are presented.

Vincent, Mark A.↗

Evaluation of advanced microelectronics for inclusion in MIL-STD-975

The approach taken by NASA and JPL (Jet Propulsion Laboratory) in the development of a MIL-STD-975 section which contains advanced technology such as Large Scale Integration and Very Large Scale Integration (LSI/VLSI) microelectronic devices is described. The parts listed in this section are recommended as satisfactory for NASA flight applications, in the absence of alternate qualified devices, based on satisfactory results of a vendor capability audit, the availability of sufficient characterization and reliability data from the manufacturers and users and negotiated detail procurement specifications. The criteria used in the selection and evaluation of the vendors and candidate parts, the preparation of procurement specifications, and the status of this activity are discussed.

Scott, W. Richard↗

Inclusion of Theta(12) dependence in the Coulomb-dipole theory of the ionization threshold

The Coulomb-dipole (CD) theory of the electron-atom impact-ionization threshold law is extended to include the full electronic repulsion. It is found that the threshold law is altered to a form in contrast to the previous angular-independent model. A second energy regime, is also identified wherein the 'threshold' law reverts to its angle-independent form. In the final part of the paper the dipole parameter is estimated to be about 28. This yields numerical estimates of E(a) = about 0.0003 and E(b) = about 0.25 eV.

Srivastava, M. K.↗

Numerical investigations with a hybrid isentropic-sigma model. I - Normal-mode characteristics. II - The inclusion of moist processes

The normal-mode characteristics of baroclinically amplifying disturbances were numerically investigated in a series of adiabatic simulations by a hybrid isentropic-sigma model, demonstrating the effect of coupling an isentropic-coordinate free atmospheric domain with a sigma-coordinate PBL on the normal-mode characteristics. Next, the normal-mode model was modified by including a transport equation for water vapor and adiabatic heating by condensation. Simulations with and without a hydrological component showed that the overall effect of latent heat release is to markedly enhance cyclogenesis and frontogenesis.

Pierce, R. B.↗