Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HARVESTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Vibration-based energy harvesting with piezoelectrets having high d{sub 31} activity

Sandwiched fluoroethylene propylene films with charged, parallel-tunnel voids between the layers, which exhibit high d{sub 31} piezoelectric activity, were designed. Stripes of such piezoelectrets were exposed to mechanical stress in length direction by a seismic mass excited to vibrations. Due to the piezoelectricity of the films, a current in a terminating resistor is generated. The harvested power across the resistor amounts to about 0.2 mW for a seismic mass of 2 g and an acceleration of 1 g. In comparison with other piezoelectret or with poly(vinylidene fluoride) harvesters, the generated power referred to equal acceleration and force, is significantly larger.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Collection of low-grade waste heat for enhanced energy harvesting

Enhanced energy harvesting through the collection of low-grade waste heat is experimentally demonstrated. A structural optimization technique is exploited in the design of a thermal-composite substrate to guide and gather the heat emanating from multiple sources to a predetermined location. A thermoelectric generator is then applied at the selected focusing region to convert the resulting low-grade waste heat to electrical power. The thermal characteristics of the device are experimentally verified by direct temperature measurements of the system and numerically validated via heat conduction simulations. Electrical performance under natural and forced convection is measured, and in both cases, the device with optimized heat flow control plus energy harvesting demonstrates increased power generation when compared with a baseline waste heat recovery system. Electronics applications include energy scavenging for autonomously powered sensor networks or self-actuated devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Vibration energy harvesting in a small channel fluid flow using piezoelectric transducer

This work is aimed at developing a way to harvest energy from a fluid stream with the application of piezoelectric transducers in a small channel. In this COMSOL Multiphysics based simulation study, it is attempted to harvest energy from the abundant renewable source of energy available in the form of kinetic energy of naturally occurring flow of fluids. The strategy involves harnessing energy from a fluid-actuator through generation of couples, eddies and vortices, resulting from the stagnation and separation of flow around a semi-circular bluff-body attached to a cantilever beam containing a piezoceramic layer. Fluctuation of fluidic pressure impulse on the beam due to vortex shedding and varying lift forces causes the flexible cantilever beam to oscillate in the direction normal to the fluid flow in a periodic manner. The periodic application and release of a mechanical strain upon the beam effected a generation of electric potential within the piezoelectric layer, thus enabling extraction of electrical energy from the kinetic energy of the fluid. The piezoelectric material properties and transducer design are kept unchanged throughout the study, whereas the configuration is tested with different fluids and varying flow characteristics. The size and geometry of the obstructing entity are systematically varied to closely inspect the output from different iterations and for finding the optimum design parameters. The intermittent changes in the generated forces and subsequent variation in the strain on the beam are also monitored to find definitive relationship with the electrical energy output.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A nonlinear interface integrated lever mechanism for piezoelectric footstep energy harvesting

Harnessing footstep energy allows for a unique method of power generation from a largely untapped resource, with applications such as instantly charging mobile and wearable electronic devices. This letter presents an easily integrated heel charger to efficiently convert kinematic walking energy into electricity. The heel charger uses a multilayered levered piezoelectric (L-Pie) mechanism associated with a nonlinear mechanical-synchronized switching on inductor circuit (M-SSHI) interface. It tactfully switches on when the foot contacts the ground, and switches off when the foot is lifted. This design takes full advantage of the user's weight, and amplifies footstep displacement by utilizing the lever mechanism to gain maximum deformation of multilayer piezoelectric patches. The experimental results show that the fabricated two-level multilayer L-pie has a top performance of 13.60 mW of AC RMS, a mechanical to AC power conversion efficiency of 7.87%, and a DC RMS power of 6.13 mW, an AC to DC power conversion efficiency of 45.07%, under a harmonic excitation of 2.3 Hz (mimicking fast walking speed: 6.2 km/h for men, 5.55 km/h for women). With an optimal load of 210 kΩ, the two-level L-pie using the M-SSHI has an improvement of 206.45% in DC RMS power compared to a standard 4-diode bridge energy harvesting circuit. Finally, the L-pie design works more efficiently under large force excitation, even with small displacement, which makes this technology optimal for footstep energy harvesting.

42 ENGINEERING↗

Regulation of photosystem I light harvesting by zeaxanthin

In oxygenic photosynthetic eukaryotes, the hydroxylated carotenoid zeaxanthin is produced from preexisting violaxanthin upon exposure to excess light conditions. Zeaxanthin binding to components of the photosystem II (PSII) antenna system has been investigated thoroughly and shown to help in the dissipation of excess chlorophyll-excited states and scavenging of oxygen radicals. However, the functional consequences of the accumulation of the light-harvesting complex I (LHCI) proteins in the photosystem I (PSI) antenna have remained unclarified so far. In this paper we investigated the effect of zeaxanthin binding on photoprotection of PSI–LHCI by comparing preparations isolated from wild-type Arabidopsis thaliana (i.e., with violaxanthin) and those isolated from the A. thaliana nonphotochemical quenching 2 mutant, in which violaxanthin is replaced by zeaxanthin. Time-resolved fluorescence measurements showed that zeaxanthin binding leads to a previously unrecognized quenching effect on PSI–LHCI fluorescence. The efficiency of energy transfer from the LHCI moiety of the complex to the PSI reaction center was down-regulated, and an enhanced PSI resistance to photoinhibition was observed both in vitro and in vivo. Thus, zeaxanthin was shown to be effective in inducing dissipative states in PSI, similar to its well-known effect on PSII. Finally, we propose that, upon acclimation to high light, PSI–LHCI changes its light-harvesting efficiency by a zeaxanthin-dependent quenching of the absorbed excitation energy, whereas in PSII the stoichiometry of LHC antenna proteins per reaction center is reduced directly.

59 BASIC BIOLOGICAL SCIENCES↗

Ultrafast energy relaxation in single light-harvesting complexes

Significance The excitation energy transfer in light-harvesting complexes is usually studied either by ultrafast bulk spectroscopy or by single-molecule spectroscopy. These methods are to a high degree complementary: Bulk spectroscopy measures ultrafast processes averaged over thousands of complexes, whereas single-molecule spectroscopy observes much slower dynamics in individual complexes. In this work, we combine these approaches using a recently developed ultrafast single-molecule spectroscopy technique. This enables us, for the first time (to our knowledge), to observe ultrafast energy relaxation with a rate around 100 fs in individual light-harvesting complexes. We determine the distribution of the relaxation times, observe changes of the relaxation time in one complex, and find how the relaxation depends on excitation wavelength.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nature-inspired light-harvesting liquid crystalline porphyrins for organic photovoltaics

A new class of nanoscale light-harvesting discotic liquid crystalline porphyrins, with the same basic structure of the best photoreceptor in nature (chlorophyll), was synthesized. These materials can be exceptionally aligned into a highly ordered architecture in which the columns formed by intermolecular {pi}-{pi} stacking are spontaneously perpendicular to the substrate. The homeotropic alignment, well confirmed by synchrotron X-ray diffraction, could not only provide the most efficient pathway for hole conduction along the columnar axis crossing the device thickness, but also offer the largest area to the incident light for optimized light harvesting. Their preliminary photocurrent generation and photovoltaic performances were also demonstrated. The results provide new and efficient pathways to the development of organic photovoltaics by using homeotropically aligned liquid crystal thin films.

14 SOLAR ENERGY↗

Electric field dependence of the Curie temperature of ferroelectric poly(vinylidenefluoride-trifluoroethylene) co-polymers for pyroelectric energy harvesting

We experimentally study pyroelectric energy harvesting in a ferroelectric co-polymer thin film, with a particular focus on the electric field dependence of its Curie temperature. Liquid-based switchable thermal interfaces are employed to achieve fast thermal cycling and reduce potential measurement errors resulting from leakage currents. Our work confirms that pyroelectric energy harvesting is most effective around the Curie temperature and that the Curie temperature does not depend strongly on electric fields, at least up to 500 kV cm(-1). These results are consistent with a recent study of the electrocaloric effect in co-polymer films of a similar composition.

Cha, G↗

Single-photon absorption by single photosynthetic light-harvesting complexes

In this paper, we provide a unified theoretical approach to the quantum dynamics of absorption of single photons and subsequent excitonic energy transfer in photosynthetic light-harvesting complexes. Our analysis combines a continuous mode $ \langle n \rangle $ -photon quantum optical master equation for the chromophoric system with the hierarchy of equations of motion describing excitonic dynamics in presence of non-Markovian coupling to vibrations of the chromophores and surrounding protein. We apply the approach to simulation of absorption of single-photon coherent states by pigment–protein complexes containing between one and seven chromophores, and compare with results obtained by excitation using a thermal radiation field. We show that the values of excitation probability obtained under single-photon absorption conditions can be consistently related to bulk absorption cross-sections. Analysis of the timescale and efficiency of single-photon absorption by light-harvesting systems within this full quantum description of pigment–protein dynamics coupled to a quantum radiation field reveals a non-trivial dependence of the excitation probability and the excited state dynamics induced by exciton–phonon coupling during and subsequent to the pulse, on the bandwidth of the incident photon pulse. Finally, for bandwidths equal to the spectral bandwidth of Chlorophyll a, our results yield an estimation of an average time of ~0.09 s for a single chlorophyll chromophore to absorb the energy equivalent of one (single-polarization) photon under irradiation by single-photon states at the intensity of sunlight.

74 ATOMIC AND MOLECULAR PHYSICS↗

Variable optical properties of light-harvesting complex II revisited

Understanding photosynthetic light harvesting requires knowledge of the molecular mechanisms that dissipate excess energy in thylakoids. However, it remains unclear how the physical environment of light-harvesting complex II (LHCII) influences the process of chlorophyll de-excitation. Here, we demonstrate that protein-protein interactions between LHCIIs affect the optical properties of LHCII and thus influence the total energy budget. Aggregation of LHCII in the dark altered its absorption properties, independent of the amount of prior light exposure. We also revisited the triplet excited state involved in light-induced fluorescence quenching and found another relaxation pathway involving emission in the green region, which might be related to triplet excited energy transfer to neighboring carotenoids and annihilation processes that result in photoluminescence. LHCII- containing liposomes with different protein densities exhibited altered fluorescence and scattering properties. Our results suggest that macromolecular reorganization affects overall optical properties, which need to be addressed to compare the level of energy dissipation.

Iwai, Masakazu↗

Aqueous harvesting of 88 Zr at a radioactive-ion-beam facility for cross-section measurements

Isotope harvesting is a method of collecting the long-lived radioisotopes that build up during the operation of ion-beam facilities in a way that is useful for subsequent research. As a demonstration of this method for the collection of a group IV metal at a fragmentation facility, the high-energy Zr 88 secondary beam produced from a 140-MeV/u Mo 92 primary beam at the National Superconducting Cyclotron Laboratory (NSCL) was stopped in a water target. The setup aimed to mimic the aqueous beam dump that will be implemented at the Facility for Rare Isotope Beams (FRIB). The collected Zr 88 and accompanying Y 88 decay daughter were radiochemically extracted from the solution and made into target samples suitable for neutron-capture cross-section measurements. These samples were then irradiated at two reactor facilities, and the Zr 88 average thermal-neutron-capture cross section ( σ T ) and resonance integral ( I ) were determined to be σ T = ( 8.04 ± 0.63 ) × 10 5 b and I = ( 2.53 ± 0.28 ) × 10 6 b. The σ T value agrees well with previous results and I , determined for the first time here, was found to be the largest measured resonance integral by two orders of magnitude. The Y 88 thermal-neutron-capture cross section was determined to be less than 1.8 × 10 4 b. This work demonstrates the steps needed to make cross-section measurements with samples produced via aqueous isotope harvesting.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Experimental Realization of a Quantum Dot Energy Harvester

We demonstrate experimentally an autonomous nanoscale energy harvester that utilizes the physics of resonant tunneling quantum dots. Gate-defined quantum dots on GaAs/AlGaAs high-electron-mobility transistors are placed on either side of a hot-electron reservoir. The discrete energy levels of the quantum dots are tuned to be aligned with low energy electrons on one side and high energy electrons on the other side of the hot reservoir. Furthermore, the quantum dots thus act as energy filters and allow for the conversion of heat from the cavity into electrical power. Our energy harvester, measured at an estimated base temperature of 75 mK in a He 3 /He 4 dilution refrigerator, can generate a thermal power of 0.13 fW for a temperature difference across each dot of about 67 mK.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ocean Wave Energy Harvester with Oak Ridge Converter

Oceans can provide great potential for the American energy dominance. There is significant potential to utilize marine energy resources. In the United States, the total amount of marine energy available is equivalent to about 57% of the country's total power generation in 2019. Even if a fraction of this technical potential is harnessed, marine energy technologies could play a crucial role in fulfilling the nation's energy requirements. Marine energy resources are spread out geographically, and because more than 50% of the United States' population resides within 50 miles of the coastline, they are well-positioned to power local communities. These resources are also very dependable, making them a viable option for contributing to a consistent, trustworthy energy grid. Due to their predictable daily and seasonal patterns, marine energy resources can be integrated into our energy generation portfolio. On the other hand, ocean environment presents many challenges for cost-effective renewable energy conversion, including optimal control of ocean wave energy. This report presents a novel cost-effective energy conversion technique for ocean wave energy harvesters. The proposed system is simulated by using the Oak Ridge Converter to directly interface ocean wave energy source with the utility grid. The system description and simulation results are presented in detail. The results show that the proposed system is a cost effective and promising technology to reduce the infrastructure cost for ocean wave energy harvesters.

Sutton, Elizabeth [ORNL] (ORCID:0009000078885935)↗

An integrated integral projection model ( IPM 2 ) to disentangle size‐structured harvest and natural mortality

Abstract Body size is one of the most important traits governing individual‐level demographic rates and modulating population‐level processes. Multiple size‐dependent demographic rates can simultaneously change population structure, so distinguishing their individual contributions to overall population dynamics remains a challenge. Disentangling size‐dependent harvest rates from other demographic rates is critical for assessing the impact of removal on populations of invasive species. Inference about invasive populations can be difficult, however, as observations are often collected opportunistically as part of removal programs, rather than experimentally designed. Yet accurate inference is essential for understanding the feasibility of population suppression and optimising management decisions. We develop an integrated integral projection model (IPM 2 ) that leverages the strengths of the integrated population model and integral projection model to enable inference about complex, size‐structured demographic rates from imperfect observations. We apply the IPM 2 in the context of invasive European green crab ( Carcinus maenas ), a species for which individual body size strongly regulates both the observation‐generating process and latent, population dynamics. The IPM 2 facilitates the distinct estimation of green crab size‐structured harvest and natural mortality rates, parameters for which no explicit data is collected and that are unidentifiable in component datasets of the integrated population model. The model represents how the green crab population changes over time, providing the first estimates of size‐structured abundance of this high‐priority species. By forecasting the stable size distribution and equilibrium population size under varying removal efforts, we demonstrate that extremely high levels of removal effort can reduce the equilibrium green crab population size. Yet these high mortality rates also shift the stable size distribution and increase the equilibrium abundance of smaller crabs, since size‐selective removal alters intraspecific interactions. The ecological outcome of this shift in size structure will be variable, as green crab size modulates only some of its interactions with other species. These results highlight the value of the IPM 2 framework for inferring complex population dynamics with information needs that outpace information in individual observational datasets, providing a path forward for accurate assessment of conservation programs.

Keller, Abigail G. [Department of Environment Scie↗

The greenhouse gas intensity and potential biofuel production capacity of maize stover harvest in the US Midwest

Agricultural residues are important sources of feedstock for a cellulosic biofuels industry that is being developed to reduce greenhouse gas emissions and improve energy independence. While the US Midwest has been recognized as key to providing maize stover for meeting near-term cellulosic biofuel production goals, there is uncertainty that such feedstocks can produce biofuels that meet federal cellulosic standards. Here, we conducted extensive site-level calibration of the Environmental Policy Integrated Climate (EPIC) terrestrial ecosystems model and applied the model at high spatial resolution across the US Midwest to improve estimates of the maximum production potential and greenhouse gas emissions expected from continuous maize residue-derived biofuels. A comparison of methodologies for calculating the soil carbon impacts of residue harvesting demonstrates the large impact of study duration, depth of soil considered, and inclusion of litter carbon in soil carbon change calculations on the estimated greenhouse gas intensity of maize stover-derived biofuels. Using the most representative methodology for assessing long-term residue harvesting impacts, we estimate that only 5.3 billion liters per year (bly) of ethanol, or 8.7% of the near-term US cellulosic biofuel demand, could be met under common no-till farming practices. However, appreciably more feedstock becomes available at modestly higher emissions levels, with potential for 89.0 bly of ethanol production meeting US advanced biofuel standards. Adjustments to management practices, such as adding cover crops to no-till management, will be required to produce sufficient quantities of residue meeting the greenhouse gas emission reduction standard for cellulosic biofuels. Considering the rapid increase in residue availability with modest relaxations in GHG reduction level, it is expected that management practices with modest benefits to soil carbon would allow considerable expansion of potential cellulosic biofuel production.

09 BIOMASS FUELS↗

On‐line discrimination of storage shelf‐life and prediction of post‐harvest quality for strawberry fruit by visible and near infrared spectroscopy

Abstract Quick assessment of storage time is important for the guarantee of fruit shelf‐life. On‐line discrimination of refrigerated storage time and prediction of post‐harvest quality for strawberry fruit was carried out by visible and near‐infrared (Vis/NIR) spectroscopy. For the classification of samples with storage time of 1, 3, 5, and 7 days, partial least square discriminant analysis (PLS‐DA) achieved correct classified rates of 93.3–97.4% in prediction based on selected wavelengths obtained by competitive adaptive reweighted sampling (CARS) at speeds of 0.05, 0.10, and 0.15 m/s. Moreover, for prediction of soluble solids content (SSC) in strawberry, the determination coefficient ( r p 2 ), root mean square error of prediction (RMSEP), and RPD value obtained by PLS coped with CARS at fruit moving speed of 0.10 m/s was 0.733, 0.699 °Brix and 1.96, respectively. Overall, this study indicates that Vis–NIR spectroscopy offers the potential as an on‐line tool for quality assurance of strawberry fruit. Practical applications Visible and near‐infrared (Vis/NIR) spectroscopy is a very attractive technique for nondestructive evaluation of quality of food products. Strawberry has an extremely short shelf‐life which is estimated to be less than 5 days. Rapid identification its postharvest storage time is essential for the evaluation of its shelf‐life. Based on the results reported here, Vis–NIR has the potential for on‐line monitoring of postharvest storage time and post‐harvest quality for strawberry fruit in real situation.

Shen, Fei↗

CURRENT STATUS OF THE CHARACTERIZATION OF RPV MATERIALS HARVESTED FROM THE DECOMMISSIONED ZION UNIT 1 NUCLEAR POWER PLANT

The decommissioning of Units 1 and 2 of the Zion Nuclear Power Station in Zion, Illinois, after ~ 15 effective full-power years of service presents a unique opportunity to characterize the degradation of in-service reactor pressure vessel (RPV) materials and to assess currently available models for predicting radiation embrittlement of RPV steels [1-3]. Moreover, through-wall thickness attenuation and property distributions are being obtained and the results to be compared with surveillance specimen test data. It is anticipated that these efforts will provide a better understanding of materials degradation associated with extending the lifetime of existing nuclear power plants (NPPs) beyond 60 years of service and subsequent license renewal. In support of extended service and current operations of the US nuclear reactor fleet, the Oak Ridge National Laboratory (ORNL), through the U.S. Department of Energy, Light Water Reactor Sustainability (LWRS) Program, coordinated procurement of materials, components, and other items of interest from the decommissioned Zion NPPs. In this report, harvesting, cutting sample blocks, machining test specimens, test plans, and the current status of materials characterization of the RPV from the decommissioned Zion NPP Unit 1 will be discussed. The primary foci are the circumferential, Linde 80 flux, wire heat 72105 (WF-70) beltline weld and the A533B base metal from the intermediate shell harvested from a region of peak fluence (0.7 X 1019 n/cm2, E > 1.0 MeV) on the internal surface of the Zion Unit 1 vessel. Following the determination of the through-thickness chemical composition, Charpy impact, fracture toughness, tensile, and hardness testing are being performed to characterize the through-thickness mechanical properties of base metal and beltline-weld materials. In addition to mechanical properties, microstructural characterizations are being performed using various microstructural techniques, including Atom Probe Tomography, Small Angle Neutron Scattering, and Positron Annihilation Spectroscopy

Rosseel, T. M.↗

Harvesting Wave Energy to Power Acoustic Transmitters Using Triboelectric Nanogenerator

Wave energy has the largest reserves and widest distribution among blue energy sources. However, the conversion and utilization of ocean wave energy are challenging. In this work, we developed a contact-separation mode triboelectric nanogenerator (TENG) with a simple structure for harvesting wave energy and powering marine sensors and transmitters and performed detailed electrical characterization under controlled laboratory conditions. A prototype power management circuit (PMC) was implemented to improve the output performance of the TENG. The output from the PMC could charge up a storage capacitor for powering sensors and electronics. Eventually, the TENG was integrated within a water-proof enclosure and tested using a custom-built wave simulator to evaluate the device performance in a more representative scenario. The device sustainably powered up an array of 27 LEDs and was able to charge up a capacitor up to 1.8 V for driving an acoustic transmitter. The results demonstrate that TENG technology shows great promise in harvesting low-frequency ocean wave energy.

Yang, Yang↗