SEARCH · Engineering Papers

Results for “Geographic region”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

All sources NASA NTRS DOE OSTI

NASA NTRS2019

Water Storage Trends in High Mountain Asia

Changes in terrestrial water storage (TWS) in High Mountain Asia (HMA) could have major societal impacts, as the region’s large reservoirs of glaciers, snow, and groundwater provide a freshwater source to more than one billion people. We seek to quantify and close the budget of secular changes in TWS over the span of the GRACE satellite mission (2003–2016). To assess the TWS trend budget we consider a new high-resolution mass trend product determined directly from GRACE L1B data, glacier mass balance derived from Digital Elevation Models (DEMs), groundwater variability determined from confined and unconfined well observations, and terrestrial water budget estimates from a suite of land surface model simulations with the NASA Land Information System (LIS). This effort is successful at closing the aggregated TWS trend budget over the entire HMA region, the glaciated portion of HMA, and the Indus and Ganges basins, where the full-region trends are primarily due to the glacier mass balance and groundwater signals. Additionally, we investigate the closure of TWS trends at individual 1-arc-degree mascons (area ≈12,000 km2); a significant improvement in spatial resolution over previous analyses of GRACE-derived trends. This mascon-level analysis reveals locations where the TWS trends are well-explained by the independent datasets, as well as regions where they are not; identifying specific geographic areas where additional data and model improvements are needed. The accurate characterization of total TWS trends and its components presented here is critical to understanding the complex dynamics of the region, and is a necessary step toward projecting future water mass changes in HMA.

Bryant D Loomis↗

DOE OSTI2022

Regional Variation in Light-Duty Plug-in Electric Vehicle Emissions

Automobile electrification is viewed as one of the key requirements for deep decarbonization of transportation. However, the exact magnitude of decarbonization from switching from a combustion of petroleum-based fuels to grid-derived electricity is a complex issue. Variations in local grid mixes lead to differing carbon intensities of electricity in different regions. This complexity is compounded by geographical differences in vehicle characteristics. This analysis considers these geographic differences to produce a historical assessment of the fuel-cycle carbon emissions of plug-in electric vehicles (PEVs) in the United States from 2011 to 2021. We find that PEVs in the United States decreased in electricity-derived carbon intensity, from 187 grams per mile to 110 grams per mile from 2011 to 2021 due to improvements in the electric grid and vehicle efficiency. Through 2021, PEVs emitted a total of 13.6 million metric tons of greenhouse gas (GHG) emissions in the United States, including both emissions from electricity and gasoline, while driving a total of 100 billion miles. Of this total, 8.39 million metric tons was due to electricity consumption. Over the same distance, comparable gasoline vehicles would have emitted between 29 and 41 million metric tons of GHG, leading to a reduction of 15 to 27 million metric tons. Relative to national-level assessments that do not factor in this regional difference, these electric vehicles resulted in 13% greater reductions in GHG emissions than previously calculated. In the future, announced goals to further decarbonize the electricity sector will continue to reduce the emissions of PEVs, including reducing emissions rates for vehicles already on the road, further improving the benefits relative to the unchanging emissions of contemporaneous gasoline vehicles.

02 PETROLEUM↗

NASA NTRS2001

Future of Colombo Airport (CMB) as an Airline Hub

Aviation throughout the world has seen profound changes within the last two decades. Today more and more airports are looking for hub operations. However, as the success of hub operation would depend on a number of parameters such as geographic location, route network, facilities available, passengers' acceptance etc., not all airports would be able to operate as successful hubs. This paper investigates the possibility for (he Bandaranayake international airport, Colombo, Sri Lanka (CMB) to emerge as a hub airport in the South Asian region. It is found that CMB is situated in a geographically advantageous position in the region with respect to the airline route network. Comparison of travel distances between CMB and prominent O-D pairs and evaluation of airline schedules at relevant established hub airports indicates that CMB could operate as a directional hub serving the South Asian market if the number of destinations with daily flights could be increased.

Jayalath, J. T. D.↗

DOE OSTI2022

Dynamic Earth Energy Storage: Terawatt-year, Grid-scale Energy Storage Using Planet Earth as a Thermal Battery (GeoTES): Phase I Project (Final Report)

Grid-scale energy storage has been identified by the U.S. Department of Energy’s (DOE) Energy Storage Grand Challenge as a necessary technology to support the continued build-out of intermittent renewable energy resources required to attain a carbon-free energy future. To meet this goal, the 2018 Department of Energy Research and Innovation Act mandated the creation of a comprehensive program to accelerate the development and commercialization of next-generation energy storage technologies. One of numerous energy storage technology options is the storage of excess energy as heated geothermal brine in suitable geologic formations. This concept, known as reservoir thermal energy storage (RTES), geologic thermal energy storage (GeoTES), aquifer thermal energy storage (ATES), etc., relies on the storage of thermal energy in geologic formations for recovery and use in large-scale direct use geothermal (e.g., district heating, industrial processes, etc.) and electrical power generation applications. This thermal energy is derived from excess or waste heat from any high-temperature heat source, such as concentrated solar or from conventional thermal/nuclear generation. As such, RTES can potentially play a significant role in meeting the energy storage shortfall in the coming decades. RTES can provide energy arbitrage through both the storage and production of thermal energy stored in geologic formations for direct use applications and can serve as a source of hot fluids that can be used to generate electricity to support peak demand ramping, thus easing stress on transmission and distribution. This energy storage option has geographic benefits in that energy can be stored locally or regionally depending on the various needs/loads. RTES can also be located across an enormous geographic area, without the need for a traditional hydrothermal resource but where thermal gradients and hydrogeology allow economic exploitation of subsurface heat. The work conducted for this project includes (1) a review of lessons learned from past high-temperature RTES international projects; (2) geochemical experimental investigation and numerical simulations of potential domestic sedimentary reservoirs and (3) development of a thermo-hydrological-mechanical (THM) numerical simulation tool for optimizing formation properties and design parameters to maximize thermal energy storage performance.

15 GEOTHERMAL ENERGY↗

NASA NTRS2003

High-school Student Teams in a National NASA Microgravity Science Competition

The Dropping In a Microgravity Environment or DIME competition for high-school-aged student teams has completed the first year for nationwide eligibility after two regional pilot years. With the expanded geographic participation and increased complexity of experiments, new lessons were learned by the DIME staff. A team participating in DIME will research the field of microgravity, develop a hypothesis, and prepare a proposal for an experiment to be conducted in a NASA microgravity drop tower. A team of NASA scientists and engineers will select the top proposals and then the selected teams will design and build their experiment apparatus. When completed, team representatives will visit NASA Glenn in Cleveland, Ohio to operate their experiment in the 2.2 Second Drop Tower and participate in workshops and center tours. NASA participates in a wide variety of educational activities including competitive events. There are competitive events sponsored by NASA (e.g. NASA Student Involvement Program) and student teams mentored by NASA centers (e.g. For Inspiration and Recognition of Science and Technology Robotics Competition). This participation by NASA in these public forums serves to bring the excitement of aerospace science to students and educators.Researchers from academic institutions, NASA, and industry utilize the 2.2 Second Drop Tower at NASA Glenn Research Center in Cleveland, Ohio for microgravity research. The researcher may be able to complete the suite of experiments in the drop tower but many experiments are precursor experiments for spaceflight experiments. The short turnaround time for an experiment's operations (45 minutes) and ready access to experiment carriers makes the facility amenable for use in a student program. The pilot year for DIME was conducted during the 2000-2001 school year with invitations sent out to Ohio- based schools and organizations. A second pilot year was conducted during the 2001-2002 school year for teams in the six-state region of Illinois, Indiana, Michigan, Minnesota, Ohio, and Wisconsin. The third year for DIME was conducted during the 2002-2003 school year for teams from the fifty United States, the District of Columbia, and Puerto Rico. An annual national DIME program is planned for the foreseeable future. Presented in this paper will be a description of DIME, an overview of the planning and execution of such a program, results from the first three years, and lessons learned from the first national competition.

DeLombard, Richard↗

DOE OSTI2021

LocOO3D User's Manual

LocOO3D is a software tool that computes geographical locations for seismic events at regional to global scales. This software has a rich set of features, including the ability to use custom 3D velocity models, correlated observations and master event locations. The LocOO3D software is especially useful for research related to seismic monitoring applications, since it allows users to easily explore a variety of location methods and scenarios and is compatible with the CSS3.0 data format used in monitoring applications. The LocOO3D software, User's Manual, and Examples are available on the web at: https://github.com/sandialabs/LocOO3D For additional information on GeoTess, SALSA3D, RSTT, and other related software, please see: https://github.com/sandialabs/GeoTessJava, www.sandia.gov/geotess, www.sandia.gov/salsa3d, and www.sandia.gov/rstt

58 GEOSCIENCES↗

NASA NTRS1974

A survey of trapped low energy electrons near the inner boundary of the inner radiation zone from the OSO-7

Data from the MIT X-ray experiment on the OSO-7 satellite were used to delineate the regions in B-L and geographic spaces where trapped radiation was encountered. The results pertain specifically to electrons with energies in a range of 10 keV centered on 55 keV which were encountered in an orbit between altitudes of 330 and 570 km and latitudes of 33.3 degrees. A typical pitch angle distribution is fitted by a Gaussian with a FWHM of 28 degrees.

Neighbours, J. E.↗

NASA NTRS1975

Radar for small-scale land-use mapping

Small-scale (1:250,000 and smaller) land-use maps are a major concern not only to geographers but also to national and regional planners. Unfortunately, such maps are usually out of date by the time they are printed. An interpretation key consisting of five physical and cultural characteristics of the environment evident on radar imagery is used to create land-use regions. Regions and borders interpreted from radar are compared with those found on two existing land-use maps created by traditional methods. Radar imagery can be used to create a small-scale land-use map with regions comparable to those found on existing land-use maps. However, the radar regions depict something more than land use and should be termed rural landscape regions.

Henderson, F. M.↗

NASA NTRS1976

Palus Somni - Anomalies in the correlation of Al/Si X-ray fluorescence intensity ratios and broad-spectrum visible albedos

The positive correlation between Al/Si X-ray fluorescence intensity ratios determined during the Apollo 15 lunar mission and a broad-spectrum visible albedo of the moon is quantitatively established. Linear regression analysis performed on 246 1 degree geographic cells of X-ray fluorescence intensity and visible albedo data points produced a statistically significant correlation coefficient of .78. Three distinct distributions of data were identified as (1) within one standard deviation of the regression line, (2) greater than one standard deviation below the line, and (3) greater than one standard deviation above the line. The latter two distributions of data were found to occupy distinct geographic areas in the Palus Somni region.

Clark, P. E.↗

NASA NTRS1981

The significance of VLF transmitters in the precipitation of inner belt electrons

The launch of the P78-1 low-altitude satellite containing a high-resolution electron spectrometer and the ISEE spacecraft with a plasma wave experiment have made it possible to perform simultaneous measurements of the waves, the plasma densities, and the precipitating electrons. It was found that nearly monochromatic waves in the range from 10 kHz to 25 kHz were frequently present in the near equatorial regions, their frequencies, narrow bandwidth, and geographic locations being consistent with various ground-based VLF transmitters as the sources. In the energy spectra of the precipitating electrons observed at low altitudes, narrow and at times multiple peaks often appear with central energies that decrease with increasing L shell. The narrow widths suggest that the interactions take place within a restricted range of latitudes which, based on other considerations, are likely equatorial.

Imhof, W. L.↗

NASA NTRS1986

Zonal and geographical distributions of cirrus clouds determined from SAGE data

Stratospheric Aerosol and Gas Experiment (SAGE) data obtained from February 1979-November 1981 are analyzed in order to evaluate the spatial extent and frequency occurrence of cirrus clouds. The capabilities of the SAGE measurement system which has a field of view of 100 sq km are discussed. The frequency of occurrence of the cirrus clouds and the frequency penetration of the clouds to fixed altitudes of 5, 7, and 9 km, and to altitudes of 1, 3 and 5 km below the troposphere are examined. It is observed that optically thick cirrus clouds form most frequently in the midlatitudes over the equator, with distinct minima near latitude bands of 20-30 deg north and south; height penetrations to 7 km occur 60 percent of the time in upper latitudes and drop to 30 percent over the tropics. The SAGE data are compared with selective chopper radiometer data and good correlation in shape and seasonal movement is displayed. The seasonal geographical distributions of cirrus clouds in regions of rising moist air associated with low-level convergence zones are described.

Woodbury, G. E.↗

NASA NTRS1988

Extremely low N2O concentrations in the springtime stratosphere at McMurdo Station, Antarctica

Measurements have been made of stratospheric N2O using the Stony Brook millimeter-wave remote sensing spectrometer at McMurdo Station, and NO2 mixing ratios are found that are less than 1.5 at 20 km and less than 1.10 at 25 km compared to values measured during the Antarctic summer. The observed mixing ratios are also much less than those predicted by global-scale models of stratospheric chemistry and dynamics. As the NO2 signal remained very weak when McMurdo was at the edges of the ozone hole and showed no signs of recovering during October, it is concluded that the geographical and temporal extent of the region of low NO2 is comparable to or greater than that of the ozone hole. These results argue against theories that require springtime upwelling to explain the Antarctic ozone hole. It is suggested that the air in the Antarctic lower stratosphere during late winter and early spring has been subjected to considerable downward transport.

Parrish, A.↗

NASA NTRS1989

Asymmetries in tidal structure between Adelaide and Kyoto

Continuous radar measurements of the wind oscillations caused by the solar diurnal and semidiurnal tides in the 80 to 110 km region of the atmosphere at the geographically conjugate stations of Adelaide (35 S, 138 E) and Kyoto (35 N, 136 E) are compared for the period 1983 to 1985. At the solstices it is found for both the 24- and 12-hr tides that the NS and EW oscillations tend to be in-phase and out-of-phase, respectively, behavior which indicates strong tidal asymmetries. The asymmetries in the 12-hr tide are consistent with a strong contribution from the (2,3) mode while the asymmetries in the 24-hr tide are ascribed to the effects of mean winds and dissipation acting to distort the (1,1) mode as it propagates up through the middle atmosphere.

Vincent, R. A.↗

NASA NTRS1989

Persistent dust cloud activity on Mars near Echus Chasma in 1978

The Echus Chasma clouds of Mars, which are the first to be observed by spacecraft in the equatorial canyon region of the planet, extend the geographic and seasonal ranges in which dust stoms are known to occur. Viking camera observations of these clouds in red and violet filters are presently noted to imply their composition to be partly dust and partly condensate. Drainage winds, part of a diurnal wind system driven by thermal and elevation contrasts, are seen as a plausible interpretation of the observed phenomena.

Martin, Leonard J.↗

NASA NTRS1997

In Situ identification of mineral resources with an X-ray-optical "Hand-Lens" instrument

Marshall, J.↗

NASA NTRS1999

In Situ Identification of Mineral Resources with an X-Ray-Optical "Hands-Lens" Instrument

The recognition of material resources on a planetary surface requires exploration strategies not dissimilar to those employed by early field geologists who searched for ore deposits primarily from surface clues. In order to determine the location of mineral ores or other materials, it will be necessary to characterize host terranes at regional or subregional scales. This requires geographically broad surveys in which statistically significant numbers of samples are rapidly scanned from a roving platform. To enable broad-scale, yet power-conservative planetary-surface exploration, we are developing an instrument that combines x-ray diffractometry (XRD), x-ray fluorescence spectrometry (XRF), and optical capabilities; the instrument can be deployed at the end of a rover's robotic arm, without the need for sample capture or preparation. The instrument provides XRD data for identification of mineral species and lithological types; diffractometry of minerals is conducted by ascertaining the characteristic lattice parameters or "d-spacings" of mineral compounds. D-spacings of 1.4 to 25 angstroms can be determined to include the large molecular structures of hydrated minerals such as clays. The XRF data will identify elements ranging from carbon (Atomic Number = 6) to elements as heavy as barium (Atomic Number = 56). While a sample is being x-rayed, the instrument simultaneously acquires an optical image of the sample surface at magnifications from lx to at least 50x (200x being feasible, depending on the sample surface). We believe that imaging the sample is extremely important as corroborative sample-identification data (the need for this capability having been illustrated by the experience of the Pathfinder rover). Very few geologists would rely on instrument data for sample identification without having seen the sample. Visual inspection provides critical recognition data such as texture, crystallinity, granularity, porosity, vesicularity, color, lustre, opacity, and so forth. These data can immediately distinguish sedimentary from igneous rocks, for example, and can thus eliminate geochemical or mineral ambiguities arising, say between arkose and granite. It would be important to know if the clay being analyzed was part of a uniform varve deposit laid down in a quiescent lake, or the matrix of a megabreccia diamictite deposited as a catastrophic impact ejecta blanket. The unique design of the instrument, which combines Debye-Scherrer geometry with elements of standard goniometry, negates the need for sample preparation of any kind, and thus negates the need for power-hungry and mechanically-complex sampling systems that would have to chip, crush, sieve, and mount the sample for x-ray analysis. Instead, the instrument is simply rested on the sample surface of interest (like a hand lens); the device can interrogate rough rock surfaces, coarse granular material, or fine rock flour. A breadboard version of the instrument has been deployed from the robotic arm of the Marsokhod rover in field trials at NASA Ames, where large vesicular boulders were x-rayed to demonstrate the functionality of the instrument design, and the ability of such a device to comply with constraints imposed by a roving platform. Currently under development is a flight prototype concept of this instrument that will weigh 0.3 kg, using about 4500 J of energy per sample analysis. It requires about 5 min. for XRD analysis, and about 30 min. for XRF interrogation. Its small mass and rugged design make it ideal for deployment on small rovers of the type currently envisaged for the exploration of Mars (e.g., Sojourner-scale platforms). The design utilizes a monolithic P-N junction photodiode pixel array for XRD, a Si PIN photodiode/avalanche photodiode system for XRF, and an endoscopic imaging camera system unobtrusively embedded between the detectors and the x-ray source (the endoscope with its board-mounted camera can be adapted for IR light in addition to visible wavelenths. A rugged, miniature (7 cu cm) x-ray source for the instrument has already been breadboarded.

Marshall, J.↗

NASA NTRS2009

Sequential Imaging of Earth by Astronauts: 50 Years of Global Change

For nearly 50 years, astronauts have collected sequential imagery of the Earth. In fact, the collection of astronaut photography comprises one of the earliest sets of data (1961 to present) available to scientists to study the regional context of the Earth s surface and how it changes. While today s availability of global high resolution satellite imagery enables anyone with an internet connection to examine specific features on the Earth s surface with a regional context, historical satellite imagery adds another dimension (time) that provides researchers and students insight about the features and processes of a region. For example, one of the geographic areas with the longest length of record contained within the astronaut photography database is the lower Nile River. The database contains images that document the flooding of Lake Nasser (an analog to today s flooding behind China s Three Gorges Dam), the changing levels of Lake Nasser s water with multiyear cycles of flood and drought, the recent flooding and drying of the Toshka Lakes, as well as urban growth, changes in agriculture and coastal subsidence. The imagery database allows investigations using different time scales (hours to decades) and spatial scales (resolutions and fields of view) as variables. To continue the imagery collection, the astronauts on the International Space Station are trained to understand basic the Earth Sciences and look for and photograph major events such as tropical storms, landslides, and volcanic eruptions, and document landscapes undergoing change (e.g., coastal systems, cities, changing forest cover). We present examples of selected sequences of astronaut imagery that illustrate the interdependence of geological processes, climate cycles, human geography and development, and prompt additional questions about the underlying elements of change.

Evans, Cynthia A.↗

NASA NTRS2014

Sedimentary Mounds on Mars: Tracing Present-day Formation Processes into the Past

High resolution photography and spectroscopy of the martian surface (MOC, HiRISE) from orbit has revolutionized our view of Mars with one and revealed spectacular views of finely layered sedimentary materials throughout the globe [1]. Some of these sedimentary deposits are 'mound' shaped and lie inside of craters (Fig 1). Crater mound deposits are found throughout the equatorial region, as well as ice-rich deposits found in craters in the north and south polar region [2-4]. Despite their wide geographical extent and varying volatile content, the 'mound' deposits have a large number of geomorphic and structural similarities that suggest they formed via equivalent processes. Thus, modern depositional processes of ice and dust can serve as an invaluable analog for interpreting the genesis of ancient sedimentary mound deposits.

Niles, P. B.↗