Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GPM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

A Ground Validation Network for the Global Precipitation Measurement Mission

A prototype Validation Network (VN) is currently operating as part of the Ground Validation System for NASA's Global Precipitation Measurement (GPM) mission. The VN supports precipitation retrieval algorithm development in the GPM prelaunch era. Postlaunch, the VN will be used to validate GPM spacecraft instrument measurements and retrieved precipitation data products. The period of record for the VN prototype starts on 8 August 2006 and runs to the present day. The VN database includes spacecraft data from the Tropical Rainfall Measuring Mission (TRMM) precipitation radar (PR) and coincident ground radar (GR) data from operational meteorological networks in the United States, Australia, Korea, and the Kwajalein Atoll in the Marshall Islands. Satellite and ground radar data products are collected whenever the PR satellite track crosses within 200 km of a VN ground radar, and these data are stored permanently in the VN database. VN products are generated from coincident PR and GR observations when a significant rain event occurs. The VN algorithm matches PR and GR radar data (including retrieved precipitation data in the case of the PR) by calculating averages of PR reflectivity (both raw and attenuation corrected) and rain rate, and GR reflectivity at the geometric intersection of the PR rays with the individual GR elevation sweeps. The algorithm thus averages the minimum PR and GR sample volumes needed to "matchup" the spatially coincident PR and GR data types. The result of this technique is a set of vertical profiles for a given rainfall event, with coincident PR and GR samples matched at specified heights throughout the profile. VN data can be used to validate satellite measurements and to track ground radar calibration over time. A comparison of matched TRMM PR and GR radar reflectivity factor data found a remarkably small difference between the PR and GR radar reflectivity factor averaged over this period of record in stratiform and convective rain cases when samples were taken from high in the atmosphere. A significant difference in PR and GR reflectivity was found in convective cases, particularly in convective samples from the lower part of the atmosphere. In this case, the mean difference between PR and corrected GR reflectivity was −1.88 dBZ. The PR-GR bias was found to increase with the amount of PR attenuation correction applied, with the PR-GR bias reaching −3.07 dBZ in cases where the attenuation correction applied is greater than 6 dBZ. Additional analysis indicated that the version 6 TRMM PR retrieval algorithm underestimates rainfall in case of convective rain in the lower part of the atmosphere by 30%-40%.

Schwaller, Mathew R.↗

A Ground Validation Network for the Global Precipitation Measurement Mission

A prototype Validation Network (VN) is currently operating as part of the Ground Validation System for NASA's Global Precipitation Measurement (GPM) mission. The VN supports precipitation retrieval algorithm development in the GPM prelaunch era. Postlaunch, the VN will be used to validate GPM spacecraft instrument measurements and retrieved precipitation data products. The period of record for the VN prototype starts on 8 August 2006 and runs to the present day. The VN database includes spacecraft data from the Tropical Rainfall Measuring Mission (TRMM) precipitation radar (PR) and coincident ground radar (GR) data from operational meteorological networks in the United States, Australia, Korea, and the Kwajalein Atoll in the Marshall Islands. Satellite and ground radar data products are collected whenever the PR satellite track crosses within 200 km of a VN ground radar, and these data are stored permanently in the VN database. VN products are generated from coincident PR and GR observations when a significant rain event occurs. The VN algorithm matches PR and GR radar data (including retrieved precipitation data in the case of the PR) by calculating averages of PR reflectivity (both raw and attenuation corrected) and rain rate, and GR reflectivity at the geometric intersection of the PR rays with the individual GR elevation sweeps. The algorithm thus averages the minimum PR and GR sample volumes needed to "matchup" the spatially coincident PR and GR data types. The result of this technique is a set of vertical profiles for a given rainfall event, with coincident PR and GR samples matched at specified heights throughout the profile. VN data can be used to validate satellite measurements and to track ground radar calibration over time. A comparison of matched TRMM PR and GR radar reflectivity factor data found a remarkably small difference between the PR and GR radar reflectivity factor averaged over this period of record in stratiform and convective rain cases when samples were taken from high in the atmosphere. A significant difference in PR and GR reflectivity was found in convective cases, particularly in convective samples from the lower part of the atmosphere. In this case, the mean difference between PR and corrected GR reflectivity was -1.88 dBZ. The PR-GR bias was found to increase with the amount of PR attenuation correction applied, with the PR-GR bias reaching -3.07 dBZ in cases where the attenuation correction applied is greater than 6 dBZ. Additional analysis indicated that the version 6 TRMM PR retrieval algorithm underestimates rainfall in case of convective rain in the lower part of the atmosphere by 30%-40%.

Schwaller, Mathew R.↗

Integrated Multi-Satellite Evaluation for the Global Precipitation Measurement: Impact of Precipitation Types on Spaceborne Precipitation Estimation

Integrated multi-sensor assessment is proposed as a novel approach to advance satellite precipitation validation in order to provide users and algorithm developers with an assessment adequately coping with the varying performances of merged satellite precipitation estimates. Gridded precipitation rates retrieved from space sensors with quasi-global coverage feed numerous applications ranging from water budget studies to forecasting natural hazards caused by extreme events. Characterizing the error structure of satellite precipitation products is recognized as a major issue for the usefulness of these estimates. The Global Precipitation Measurement (GPM) mission aims at unifying precipitation measurements from a constellation of low-earth orbiting (LEO) sensors with various capabilities to detect, classify and quantify precipitation. They are used in combination with geostationary observations to provide gridded precipitation accumulations. The GPM Core Observatory satellite serves as a calibration reference for consistent precipitation retrieval algorithms across the constellation. The propagation of QPE uncertainty from LEO active/passive microwave (PMW) precipitation estimates to gridded QPE is addressed in this study, by focusing on the impact of precipitation typology on QPE from the Level-2 GPM Core Observatory Dual-frequency Precipitation Radar (DPR) to the Microwave Imager (GMI) to Level-3 IMERG precipitation over the Conterminous U.S. A high-resolution surface precipitation used as a consistent reference across scales is derived from the ground radar-based Multi-Radar/Multi-Sensor. While the error structure of the DPR, GMI and subsequent IMERG is complex because of the interaction of various error factors, systematic biases related to precipitation typology are consistently quantified across products. These biases display similar features across Level-2 and Level-3, highlighting the need to better resolve precipitation typology from space and the room for improvement in global-scale precipitation estimates. The integrated analysis and framework proposed herein applies more generally to precipitation estimates from sensors and error sources affecting low-earth orbiting satellites and derived gridded products.

Rainfall↗

Heading for 20 Years of Quasi-Global Precipitation with the New Version 06 IMERG

The U.S. Global Precipitation Measurement mission (GPM) science team is developing a long-term dataset based on intercalibrated estimates from the international constellation of precipitation-relevant satellites and other data. The Integrated Multi-satellitE Retrievals for GPM (IMERG) merged precipitation product (IMERG) is computed at the half hour, 0.1° x 0.1° resolution globally in three "Runs"—Early, Late, and Final (4 hours, 14 hours, and 3.5 months after observation time, respectively). GPM is well into computing the new Version 06, which will be the first time IMERG covers the last two decades and routinely provides morphed estimates in polar regions where the surface is snow- and ice-free.A few salient features of the IMERG algorithm will be summarized, then representative examples of IMERG products will be shown. This starts with basic results, such as animations of maps, then extends to preliminary analyses of dataset characteristics. For example, the diurnal cycle demonstrates improvements over V05.

Huffman, George J.↗

Early Results for Version 06 IMERG

The U.S. Global Precipitation Measurement mission (GPM) science team is developing a long-term dataset based on intercalibrated estimates from the international constellation of precipitation-relevant satellites and other data. The Integrated Multi-satellitE Retrievals for GPM (IMERG) merged precipitation product (IMERG) is computed at the half hour, 0.1° x 0.1° resolution globally in three "Runs" Early, Late, and Final (4 hours, 14 hours, and 3.5 months after observation time, respectively). The longer latencies increase the available input data for the resulting estimates, most notably the use of monthly precipitation gauge analyses in the Final run. The Early and Late runs use a climatological gauge adjustment as a proxy for the monthly gauge analyses. At meeting time GPM should be well into computing the new Version 06, which will be the first time IMERG covers the last two decades and routinely provides morphed estimates in polar regions where the surface is snow- and ice-free. In this talk a few salient features of the IMERG algorithm will be summarized, then representative examples of IMERG products will be shown. This starts with basic results, such as animations of near-real-time maps, then extends to preliminary analyses of dataset characteristics. For example, the accumulations during Hurricane Harvey around Houston, Texas, USA, tended to be low, while accumulations along the Texas/Louisiana border to the northeast tended to be high. Furthermore, these opposite-sign differences occurred more or less simultaneously over much of the accumulation period. The working hypothesis is that there were systematic differences in the convective "regime" in the two places. The talk will end with a quick summary of the processing status and the future course of IMERG development.

Huffman, George J.↗

Comparison of Raindrop Size Distribution between NASA’s S-Band Polarimetric Radar and Two-Dimensional Video Disdrometers

The ground-based-radar-derived raindrop size distribution (DSD) parameters—mass-weighted drop diameter Dmass and normalized intercept parameter NW—are the sole resource for direct validation of the National Aeronautics and Space Administration (NASA) Global Precipitation Measurement (GPM) mission Core Observatory satellite-based retrieved DSD. Both Dmass and NW are obtained from radar-measured reflectivity ZH and differential reflectivity ZDR through empirical relationships. This study uses existing relationships that were determined for the GPM ground validation (GV) program and directly compares the NASA S-band polarimetric radar (NPOL) observables of ZH and ZDR and derivedDmass and NW with those calculated by two-dimensional video disdrometer (2DVD). The joint NPOL and 2DVD datasets were acquired during three GPM GV field campaigns conducted in eastern Iowa, southern Appalachia, and western Washington State. The comparative study quantifies the level of agreement for ZH, ZDR, Dmass, and log(NW) at an optimum distance (15–40 km) from the radar as well as at distances greater than 60 km from radar and over mountainous terrain. Interestingly, roughly 10%–15% of the NPOL ZH–ZDR pairs were well outside the envelope of 2DVD-estimated ZH–ZDR pairs. The exclusion of these pairs improved the comparisons noticeably.

Ali Tokay↗

Global Precipitation Means and Variations with the New Version of GPCP

Knowledge of global precipitation means, patterns and variations is essential for understanding the global water cycle. The observation-based global analysis of the Global Precipitation Climatology Project (GPCP) has been a key input to many such studies, including those related to means of the global (and regional) water and energy cycles. A new version (Version 3.1) of the GPCP monthly analysis is now available (1983-2019), with finer spatial resolution (0.5º latitude/longitude), updated satellite algorithms, latest gauge analysis over land from the Global Precipitation Climatology Center (GPCC), and with ocean climatologies adjusted using information from the Tropical Rainfall Measuring Mission (TRMM), the Global Precipitation Measurement (GPM) mission and CloudSat. The presentation will give key findings from the new analysis, compare with the previous version, link to studies of the water cycle and compare to CMIP6 climate model results. The GPCP Monthly V3.1 analysis uses a Tropical Composite Climatology (TCC) using 22 years (1998-2019) of TRMM and GPM-based surface precipitation estimates from passive microwave, radar and combined passive microwave and radar observations to adjust the long-term mean values in the tropics over ocean. At higher latitudes over ocean climatological values of merged CloudSat and GPM combined passive microwave and radar surface precipitation estimates are used. The result of the new algorithms and procedures is an ocean mean value 60º N to 60º S of 3.2 mm/d, an increase of 7% from the older V2.3. Over land the gauge analysis (from GPCC in Germany), combined with satellite estimates results in a small decrease (~ 0.5%) from the previous version, giving a total global precipitation mean of 2.81 mm/d for V3.1, an increase of 4.5%. Variations from inter-annual to trend scales over most of the ocean are driven by the Colorado State University (CSU) Goddard Profiling (GPROF) algorithm applied to SSMI/SSMIS satellite data. The new GPCP version retains a near zero trend of global precipitation, with significant positive trends in the deep tropics along the Pacific ITCZ and elsewhere, countered by middle latitude decreases, very similar to the previous version of the GPCP Monthly analysis. The pattern of trends is similar to that of AMIP climate model results, driven by observed SSTs for the period in question, but very different from results for “free-running” CMIP historical ensembles, likely due in part to the relatively short comparison period and effects of inter-decadal variations in the GPCP and AMIP results that are not in the “history” models. Interannual variations are also nearly the same in the new version, but with finer detail, although ENSO variations over the ocean have slightly larger amplitude than before, an effect likely related to the change in ocean satellite algorithm used in Version 3. For precipitation intensity (percentiles) at the monthly scale, especially in the tropics, GPCP shows a positive trend for the upper one third of the percentiles (Pct ≥ 70th) and a much weaker positive trend for the lowest percentiles (Pct ≤ 10th), while negative trends appear for the middle one-half percentiles (20th-65th). AMIP results agree with those from the GPCP in terms of the sign of the changes/trends for high and intermediate percentiles. The CMIP historical results also agree in the sign of the trends, but the trends are weaker. Comparisons with other types of CMIP historical simulations including the GHG-only, aerosol-only, and nature-only runs suggest that the observed changes/trends in precipitation amount and intensity during the GPCP period are dominated by a combination of the effects of the Pacific Decadal Oscillation (PDO) and anthropogenic GHG-related surface warming.

Robert Adler↗

Comparison of Raindrop Size Distribution between NASA's S-Band Polarimetric Radar and Two-Dimensional Video Disdrometers

The ground-based-radar-derived raindrop size distribution (DSD) parameters—mass-weighted drop diameter D mass and normalized intercept parameter NW—are the sole resource for direct validation of the National Aeronautics and Space Administration (NASA) Global Precipitation Measurement (GPM ) mission Core Observatory satellite-based retrieved DSD. Both D mass and NW are obtained from radar-measured reflectivity Z Hand differential reflectivity ZDR through empirical relationships. This study uses existing relationships that were determined for the GPM ground validation (GV) program and directly compares the NASA S-band polarimetric radar (NPOL) observables of Z Hand Z DR and derived D mass and NW with those calculated by two-dimensional video disdrometer (2DVD). The joint NPOL and 2DVD datasets were acquired during three GPM GV field campaigns conducted in eastern Iowa, southern Appalachia, and western Washington State. The comparative study quantifies the level of agreement for ZH, ZDR, D mass, and log (NW) at an optimum distance (15–40 km) from the radar as well as at distances greater than 60 km from radar and over mountainous terrain. Interestingly, roughly 10%–15% of the NPOLZH–Z DR pairs were well outside the envelope of 2DVD-estimatedZH–Z DR pairs. The exclusion of these pairs improved the comparisons noticeably.

Ali Tokay↗

Integrated Multi-satellite Evaluation for the Global Precipitation Measurement: Impact of Precipitation Types on Spaceborne Precipitation Estimation

An integrated multi-sensor assessment is proposed as a novel approach to advance satellite precipitation validation in order to provide users and algorithm developers with an assessment adequately coping with the varying performances of merged satellite precipitation estimates. Gridded precipitation rates retrieved from space sensors with quasi-global coverage feed numerous applications ranging from water budget studies to forecasting natural hazards caused by extreme events. Characterizing the error structure of satellite precipitation products is recognized as a major issue for the usefulness of these estimates. The Global Precipitation Measurement (GPM) mission aims at unifying precipitation measurements from a constellation of low-earth orbiting (LEO) sensors with various capabilities to detect, classify and quantify precipitation. They are used in combination with geostationary observations to provide gridded precipitation accumulations. The GPM Core Obser­vatory satellite serves as a calibration reference for consistent precipitation retrieval algorithms across the constellation. The propagation of QPE uncertainty from LEO active/passive microwave (PMW) precipitation estimates to gridded QPE is addressed in this study, by focusing on the impact of precipitation typology on QPE from the Level-2 GPM Core Observatory Dual-frequency Precipitation Radar (DPR) to the Microwave Imager (GMI) to Level-3 IMERG precipitation over the Conterminous U.S. A high-resolution surface precipitation used as a consistent reference across scales is derived from the ground radar-based Multi-Radar/Multi­Sensor. While the error structure of the DPR, GMI and subsequent IMERG is complex because of the interaction of various error factors, systematic biases related to precipitation typology are consistently quantified across products. These biases display similar features across Level-2 and Level-3, highlighting the need to better resolve precipitation typology from space and the room for improvement in global­scale precipitation estimates. The integrated analysis and framework proposed herein applies more generally to precipitation estimates from sensors and error sources affecting low-earth orbiting satellites and derived gridded products.

Pierre-Emmanuel Kirstette↗

166 GHz Ice Scattering Signal in Cold-Season Precipitating Cloud Systems

Surface snowfall can be produced by a variety of forcing mechanisms that are accompanied by different in-cloud physical processes and microphysical composition. For instance, shallow cumuliform snowfall forced by marine cold air outbreaks shows distinct geographic and seasonal signatures and plays in important role in annual snowfall production in many regions worldwide. Coincident CloudSat-CALIPSO observations confirm that oceanic regions exhibiting frequent shallow cumuliform snow are typically composed of mixed-phase cloud and precipitation particles and display passive microwave brightness temperature behavior that is dominated by cloud liquid water emission, while combined Global Precipitation Measurement (GPM) radiometer and surface radar studies of intense shallow cumuliform events indicate significant ice particle scattering signals at the highest GPM radiometer frequencies. Passive microwave imager channels in the 37 to 89 GHz range have long been used to detect precipitation-sized ice particle scattering signatures in clouds. Dual polarization plays an important role in distinguishing between scattering signatures and other background variability. The GPM Microwave Imager (GMI) is the first satellite radiometer to possess dual-polarized channels at 166 GHz. These high-frequency channels are more susceptible to emission and attenuation by cloud liquid water and water vapor than lower-frequency channels, but are also more sensitive to ice scattering. This research studies the ice scattering information contained in the 166 GHz channels compared to the historically used 85/89 GHz channels on previous sensors. A 166 GHz scattering index (SI) will be developed to understand how its correlation with non-precipitating ice scattering at higher altitudes also affects the 166 GHz scattering signature in cold-season precipitating cloud systems. The 166 GHz SI will be used to possibly isolate precipitation scattering signature for different snowfall modes (shallow convective vs. deep stratiform). The supercooled liquid water affecting shallow convective systems and drastically reducing the scattering signal could be detected and quantified, providing additional information for convective snow detection and quantification in solid precipitation retrieval algorithms.

Lisa Milani↗

High Latitude Considerations in the Latest GPCP monthly and daily products (V3.1)

The Global Precipitation Climatology Project (GPCP) product is a popular combined satellite-gauge precipitation data set in which the long-term standards of consistency and homogeneity is underlined. Here we discuss various high latitude analysis considered in the recently released GPCP V3.1 monthly and daily products. Satellite data are used over land and ocean and obtained from the Special Sensor Microwave Imager (SSMI), Special Sensor Microwave Imager/Sounder (SSMIS), geostationary imagers and polar orbiting infrared sounders. GPCP uses the Global Precipitation Climatology Centre (GPCC) over land, as its in situ component, but prior to combination with satellite data GPCC estimates are adjusted for gauge undercatch. Advanced sensors aboard the Tropical Rainfall Measuring Mission (TRMM), CloudSat, and Global Precipitation Measurement (GPM) mission have enabled more accurate estimation of rain and snowfall rates in recent years. Started with GPCP V3.1 these observations are integrated into GPCP through the development of the Tropical Combined Climatology (TCC) used at lower latitudes and the Merged CloudSat, TRMM, and GPM (MCTG) climatology used over the extra tropics and higher latitudes. Improved calibrations of Television-Infrared Operational Satellite (TIROS) Operational Vertical Sounder (TOVS) and Advanced Infrared Sounder (AIRS) precipitation are used outside 60ºN-S, where inside this zone the Goddard Profiling (GPROF) algorithm retrievals from SSMI/SSMIS is used to calibrate geostationary IR based precipitation estimate at monthly scale. The Gravity Recovery and Climate Experiment (GRACE) mass change observations are used to determine snowfall accumulations over frozen land and arctic basins and to assess gauge undercatch corrections. Observations of snow on sea ice from NASA’s Operation IceBridge (OIB) flights are utilized as an additional tool for snowfall assessment over sea ice. GPCP V3.1 has higher spatial resolution (0.5ox0.5o) than earlier versions (2.5ox2.5o) over both land and ocean, going back to 1983. Version 3 Daily product uses the Integrated Multi-satellitE Retrievals for Global Precipitation Measurement (GPM) mission (IMERG) Final Run V06 estimates, where available (initially restricted to 60°N-S), as well as rescaled TOVS/AIRS data in high-latitude areas, all calibrated to the GPCP V3.1 Monthly estimate. GPCP V3.1 shows about 6% increase in global oceanic precipitation and about 4.5% increase over global land and ocean compared to the previous version (V2.3), some major changes occur over the ocean and around 40oS and 60 oS. We will discuss other important changes of GPCP V3.1, compared to the earlier versions, and our future plans. Through this presentation we will also discuss that while ACCP will provide key information about precipitation, synergistic use of other Earth observing systems (e.g., mass change; recognized as a designated mission in 2017 decadal survey) can also help refine precipitation analysis, especially in high latitude and cold regions.

Ali Behrangi↗

Where IMERG Goes Next: Version 08 and Beyond

With the Version 07 (V07) Integrated Multi-satellitE Retrievals for GPM (IMERG) algorithm finalized and production initiated, the focus turns to enhancements for Version 08. These include innovations not included in V07 due to time constraints, plus issues revealed by the initial V07 products. One high priority is to evaluate and revise the schemes in V07 that rectify temporal artifacts caused by the time interpolation that fills the gaps between the various passive microwave (PMW) sensor overpasses. A second priority is to improve the homogeneity between the TRMM and GPM eras by characterizing differences between the two eras, determining the causes of these differences, and applying corrections as feasible, perhaps by enforcing spatial scale consistency (an overarching issue). Certainly, we must account for GPROF and the Combined Radar-Radiometer Algorithm converting to Machine Learning schemes in V08. Other priority topics include additional automated quality control for artifacts in the IR brightness temperatures and PMW precipitation fields, revisions to the specification algorithm for the probability of liquid precipitation, and accommodating new PMW sensors, which include the next generation of small-sats. We also consider the post-V08 landscape; the final GPM reprocessing will be restricted to fixing known code or algorithmic errors. Nonetheless, there are several data sources on the horizon to consider, including more small-sat PMW radiometers, AVHRR-based precipitation estimates (most useful in high latitudes), and the ISCCP-Next Generation and GEO-Ring projects that could provide easy access to multiple geosynchronous satellite channels and enable significantly improved algorithms compared to GEO-IR alone.

George J. Huffman↗

Leveraging the Multiplatform Precipitation Feature Database of Combined Ground Radar and Satellite Lightning Observations for Convective Studies

The Multiplatform Precipitation Feature (MPF) database combines coincident observations of lightning from space with satellite- and ground-based radar data in a storm-based, feature-defined framework. The concept for the MPF database stems from the motivation to extend the scale and scope of investigations into the complex connections between ice precipitation, updrafts, and lightning in thunderstorms. The earliest iteration of the MPF database incorporates NASA International Space Station Lightning Imaging Sensor (ISS LIS) observations alongside the NASA Global Precipitation Measurement (GPM) Mission Dual-frequency Precipitation Radar (DPR) and Validation Network (VN). Because of the specific role of the GPM VN in forming the first MPFs, this subset is referred to as the VNMPF database. The synthesis of these multi-scale and multi-resolution observations leveraged each platform’s unique insights into convective properties and processes, offering a more complete view of deep convection over the large viewing area afforded by satellite coverage. The VNMPF database established the feasibility and infrastructure to combine microphysical, kinematic, and lightning observations from multiple satellite- and ground-based platforms. Following this successful proof-of-concept, recent progress has expanded the MPF database to make use of coincident ISS LIS lightning observations and data from the operational Weather Surveillance Radar - 1988 Doppler (WSR-88D) network, where individual WSR-88D proximity facilitates vertical wind retrievals via dual-Doppler analysis. These database changes have expanded the scope of the dataset by removing the requirement for coincident GPM and ISS LIS overpasses. This increases the sample size dramatically and facilitates analysis of higher-resolution radar-derived properties. These advancements allow both storm-scale and unprecedented broad statistical analyses of deep convection from electrical, kinematic, and microphysical perspectives over the contiguous United States. This presentation outlines the construction of the new MPF database and introduces some preliminary analyses of the convection captured within it. Early results summarize relationships based on updraft characteristics ascertained from WSR-88D dual-Doppler three-dimensional wind retrievals, properties of ice microphysics gleaned from dual-polarization analyses, and electrical characteristics observed by the ISS LIS. The expanded scale and scope offered by more than five years of ISS LIS observations enable new insights into regional and seasonal variations in the microphysical, kinematic, and electrical relationships of convection. Analysis of the database highlights the potential for advancements in lightning meteorology made possible by combining large-scale spaceborne lightning detection and proven storm interrogation tools such as operational polarimetric Doppler radar.

Lightning↗

Precipitation Science at NASA MSFC

The Precipitation Research Group in NASA MSFC’s Earth Science Branch (ST-11) focuses on observations of precipitation (rain, snow, and hail) from a variety of perspectives: ground-based radars, surface gauge networks, airborne instruments, and spaceborne measurements from onboard satellites. Current work includes identifying signatures of hail and strong thunderstorms from spaceborne measurements and assessing those signatures against multiple satellite datasets and ground-based radar observations. The Precipitation Team is also involved in the development and maintenance of NASA’s global-gridded multi-satellite precipitation product (IMERG) and operating and maintaining the GPM Validation Network (VN): a software package that geometrically matches the reference ground-based weather radar observations with GPM satellite observations in 3D. The team is also responsible for the Advanced Microwave Precipitation Radiometer (AMPR) used in airborne field campaign research, which recently was used to collect data on thunderstorms that produce terrestrial gamma-ray flashes (TGFs) in the Airborne Lightning Observatory for FEGS and TGFs (ALOFT) field campaign. While the Precipitation Group largely supports NASA’s Global Precipitation Measurement (GPM) mission and Precipitation Science Team, the team also looks to the future Precipitation Measurement Mission (PMM) and Investigation of Convective Updrafts (INCUS) missions.

Sarah D Bang↗

Do Better Satellite Precipitation Algorithms Improve Landslide Hazard Assessment?

Satellites make it possible to estimate precipitation in near real time. Given the challenges of achieving global coverage by other means, these data are used widely. However, few systems for landslide hazard assessment rely on satellite precipitation estimates. This could be due in part to perceptions of accuracy, although latency, spatial resolution, and other factors may also be important. We test whether recent changes to data streams from the Global Precipitation Measurement mission (GPM) have improved its potential for use in landslide prediction. Specifically, we examine data produced by the Integrated Multi-satellitERetrievals for the GPM (IMERG) algorithm, which was upgraded to version 7 this year. IMERG relies upon other algorithms, including the Goddard Profiling Algorithm (GPROF) and the GPM Combined Radar-Radiometer Algorithm (CORRA). Many changes have been made during the switch from IMERG version 6 to version 7. These include upgrading CORRA and GPROF to version 7, to improve the accuracy of precipitation in frozen, mountainous, and coastal areas. The measured intensity of some storms has been enhanced with a new algorithm, the Scheme for Histogram Adjustment with Ranked Precipitation Estimates in the Neighborhood. Combined with many others, these changes to IMERG should improve its utility for landslide hazard assessment in a variety of contexts. To test this idea, we retrain the global Landslide Hazard Assessment for Situational Awareness (LHASA) model twice—first with data from IMERG version 6B and second with 7B. Since current daily rainfall is the most important variable in determining outcomes predicted by LHASA, it should reflect changes made to that input. First, we grid the landslides at a daily, thirty-arcsecond resolution. This serves as the response variable. At each of these sites current and antecedent rainfall are extracted, along with antecedent snow mass and soil moisture, slope, and PGA. In addition, one million grid cells are selected at random points to represent conditions under which landslides (probably) do not occur. After merging these data, we hold back 20% of the dataset for validation purposes and train a machine-learning model with the rest. We assess both the model’s overall ability to identify landslides and its ability to predict specific large landslide disasters.

Thomas A Stanley↗

Grout long radius flow testing to support Saltstone disposal Unit 5 design

The Saltstone Facility, located within the Savannah River Site (SRS) near Aiken, South Carolina, consists of two facility segments: The Saltstone Production Facility (SPF) and the Saltstone Disposal Facility (SDF). The SPF receives decontaminated legacy low level sodium salt waste solution that is a byproduct of prior nuclear material processing. The salt solution is mixed with cementitious materials to form a grout slurry known as “Saltstone”. The grout is pumped to the SDF where it is placed in a Saltstone Disposal Unit (SDU) to solidify. SDU 6 is referred to as a “mega vault” and is currently in the design stage. The conceptual design for SDU 6 is a single cell, cylindrical geometry approximately 114.3 meters in diameter by 13.1 meter high and is larger than previous cylindrical SDU designs, 45.7 meters in diameter by 7.01 meters high (30 million gallons versus 2.9 million gallons of capacity). Saltstone slurry will be pumped into the new waste disposal unit through roof openings at a projected flow rate of about 34.1 cubic meters per hour. Nine roof openings are included in the design to discharge material into the SDU with an estimated grout pour radius of 22.9 to 24.4 meters and initial drop height of 13.1 meters. The conceptual design for the new SDU does not include partitions to limit the pour radius of the grout slurry during placement other than introducing material from different pour points. This paper addresses two technical issues associated with the larger diameter of SDU 6; saltstone flow distance in a tank 114.3 meters in diameter and quality of the grout. A long-radius flow test scaled to match the velocity of an advancing grout front was designed to address these technology gaps. The emphasis of the test was to quantify the flow distance and to collect samples to evaluate cured properties including compressive strength, porosity, density, and saturated hydraulic conductivity. Two clean cap surrogate mixes (saltstone premix plus water) were designed to simulate slurry with the reference saltstone rheology and a saltstone with extra water from the process flushing operation. Long-radius flow tests were run using approximately 4.6 cubic meters of each of these mixes. In both tests the pump rate was 0.063 liters/second (1 gpm). A higher pump rate, 0.19 liters/second (3 gpm), was used in a third long-radius flow test. The angle of repose of the grout wedges increased as a function of time in all three tests. The final angles of repose were measured at 3.0º, 2.4º, and 0.72º. The pump rate had the largest effect on the radial flow distance and slope of the grout surface. The slope on the pour placed at 0.19 liters/second (3 gpm) was most representative of the slope on the grout currently being pumped into SDU 2 which is estimated to be 0.7º to 0.9º. The final grout heights at 1/3 of a meter from the discharge point were 115, 105, and 38 cm. Entrapped air (≥ 0.25 cm bubbles) was also observed in all of the mixes. The entrapped air appeared to be released from the flows within about 3.1 meters (10 feet) of the discharge point. The bleed water was clear but had a thin layer of floating particulates. The bleed water should be retrievable by a drain water collection system in SDU 6 assuming the system does not get clogged. Layering was observed and was attributed to intervals when the hopper was being cleaned. Heat from the hydration reactions was noticeable to the touch.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Hydraulic and Thermal Stimulation Program at Raft River Idaho, A DOE EGS

A Department of Energy Enhanced Geothermal System (EGS) stimulation program has injected over 254 million gallons of water into the well RRG-9 ST1 since the summer of 2013. Three major stimulations have been conducted during the program increasing injection flow rates from less than 20 gpm to 550 gpm. Geologic, water chemistry, microseismic activity, and borehole imaging data have been used to develop a conceptual model describing possible flow paths of this injected water. This model contains two major fracture zones one of which intersects the RRG-9 ST1 wellbore. Modified Hall and injectivity index plots constructed using injection flow rates, surface temperatures, and wellhead pressures show steady improvement in the injectivity of the well. Here, the injectivity index has risen from 0.15 gpm/psi to 2.0 gpm/ psi. A pressure falloff test conducted on April 28, 2015 indicates a reservoir permeability of 1,220 md and -5.38 skin factor. The well stimulation program was simulated numerically using an Idaho National Laboratory reservoir simulation code, FALCON. These simulations show a significant increase in the permeability of connecting fracture pathways after each stimulation event.

Enhanced geothermal system↗

Grout Long Radius Flow Testing to Support Saltstone Disposal Unit 6 Design - 13352

The Saltstone Facility, located within the Savannah River Site (SRS) near Aiken, South Carolina, consists of two facility segments: The Saltstone Production Facility (SPF) and the Saltstone Disposal Facility (SDF). The SPF receives decontaminated legacy low level sodium salt waste solution that is a byproduct of prior nuclear material processing. The salt solution is mixed with cementitious materials to form a grout slurry known as 'Saltstone'. The grout is pumped to the SDF where it is placed in a Saltstone Disposal Unit (SDU) to solidify. SDU 6 is referred to as a 'mega vault' and is currently in the design stage. The conceptual design for SDU 6 is a single cell, cylindrical geometry approximately 114.3 meters in diameter by 13.1 meter high and is larger than previous cylindrical SDU designs, 45.7 meters in diameter by 7.01 meters high (30 million gallons versus 2.9 million gallons of capacity). Saltstone slurry will be pumped into the new waste disposal unit through roof openings at a projected flow rate of about 34.1 cubic meters per hour. Nine roof openings are included in the design to discharge material into the SDU with an estimated grout pour radius of 22.9 to 24.4 meters and initial drop height of 13.1 meters. The conceptual design for the new SDU does not include partitions to limit the pour radius of the grout slurry during placement other than introducing material from different pour points. This paper addresses two technical issues associated with the larger diameter of SDU 6; Saltstone flow distance in a tank 114.3 meters in diameter and quality of the grout. A long-radius flow test scaled to match the velocity of an advancing grout front was designed to address these technology gaps. The emphasis of the test was to quantify the flow distance and to collect samples to evaluate cured properties including compressive strength, porosity, density, and saturated hydraulic conductivity. Two clean cap surrogate mixes (Saltstone premix plus water) were designed to simulate slurry with the reference Saltstone rheology and a Saltstone with extra water from the process flushing operation. Long-radius flow tests were run using approximately 4.6 cubic meters of each of these mixes. In both tests the pump rate was 0.063 liters/second (1 gpm). A higher pump rate, 0.19 liters/second (3 gpm), was used in a third long-radius flow test. The angle of repose of the grout wedges increased as a function of time in all three tests. The final angles of repose were measured at 3.0 deg., 2.4 deg., and 0.72 deg.. The pump rate had the largest effect on the radial flow distance and slope of the grout surface. The slope on the pour placed at 0.19 liters/second (3 gpm) was most representative of the slope on the grout currently being pumped into SDU 2 which is estimated to be 0.7 deg. to 0.9 deg. The final grout heights at 1/3 of a meter from the discharge point were 115, 105, and 38 cm. Entrapped air (≥ 0.25 cm bubbles) was also observed in all of the mixes. The entrapped air appeared to be released from the flows within about 3.1 meters (10 feet) of the discharge point. The bleed water was clear but had a thin layer of floating particulates. The bleed water should be retrievable by a drain water collection system in SDU 6 assuming the system does not get clogged. Layering was observed and was attributed to intervals when the hopper was being cleaned. Heat from the hydration reactions was noticeable to the touch. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗