Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fuel Rod Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Evaluation of accuracy of calculations of VVER-1000 core states with incomplete covering of fuel by the absorber

An additional verification of bundled software (BS) SAPFIR-95 and amp;RC [1] and code KORSAR/GP [2] was performed. Both software products were developed in A.P. Alexandrov NITI and certified by ROSTEKHNADZOR of RF for numeric simulation of stationary, transitional and emergency conditions of VVER reactors. A benchmark model for neutronics calculations was created within the limits of this work. The cold subcritical state of VVER - 1000 reactor stationary fuelling was simulated on the basis of FA with an increased height of the fuel column (TVS-2M) considering detailed presentation of radial and front neutron reflectors. A case of passing of pure condensate slug through the core in initially deep subcritical state during start of the first RCP set after refueling was considered as an examined condition of reactor operation. A relatively small size of the slug, its spatial position near the reflectors (lower and lateral), as well as failure of the inserted control rods of the control and protection system (CPS CR) to reach the lower limit of the fuel column stipulate for methodical complexity of a correct calculation of the neutron multiplication constant (K{sub eff}) using engineering codes. Code RC was used as a test program in the process of reactor calculated 3-D modeling. Code MCNP5 [3] was used as the precision program, which solves the equation of neutrons transfer by Monte-Carlo method and which was developed in the US (Los-Alamos). As a result of comparative calculations dependency of K{sub eff} on two parameters was evaluated - boron acid concentration (Cb) and CPS CR position. Reactivity effect was evaluated, which is implemented as a result of failure of all CPS control rods to reach the lower fuel limit calculated using the engineering codes mentioned above. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Effects of transient fission gas release on rod balloon burst behavior during a loss-of-coolant accident

The US nuclear energy industry is investigating strategies to increase the reactor operating cycle to 24 months, which would result in rod average burnups exceeding the current limit of 62 GWd/tU. To support this goal, multiphysics simulations tools and methodologies are being developed to predict the effects of this change during transient events such as loss-of-coolant accidents (LOCAs). In this work, two cladding burst correlations were used to predict cladding failure. Here, these were coupled with three transient fission gas release (tFGR) models and were implemented in the BISON fuel performance code to quantify any changes in cladding burst behavior during a large-break LOCA. First, a simple linear model was used to perform a sensitivity analysis of a single fuel rod. Second, a tFGR model available in BISON was applied to 281 fuel rods throughout the core. The third model examined was an empirical correlation based on data from the literature.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Multiphysics Simulation of the NASA SIRIUS-CAL Fuel Experiment in the Transient Test Reactor Using Griffin

After approximately 50 years, NASA is restarting efforts to develop nuclear thermal propulsion (NTP) for interplanetary missions. Building upon nuclear engine tests performed from the late 1950s to the early 1970s, the present research and testing focuses on advanced materials and fabrication methods. A number of transient tests have been performed to evaluate materials performance under high-temperature, high-flux conditions, with several more experiments in the pipeline for future testing. The measured data obtained from those tests are being used to validate the Griffin reactor multiphysics code for this particular type of application. Griffin was developed at Idaho National Laboratory (INL) using the MOOSE framework. This article describes the simulation results of the SIRIUS-CAL calibration experiment in the Transient Reactor Test Facility (TREAT). SIRIUS-CAL was the first transient test conducted on NASA fuels, and although the test was performed with a relatively low core peak power, the test specimen survived a temperature exceeding 900 K. Griffin simulations of the experiment successfully matched the reactor’s power transient after calibrating the initial control rod position to match the initial reactor period. The thermal-hydraulics model largely matches the time-dependent response of a thermocouple located within the experiment specimen to within the uncertainty estimate. However, the uncertainty range is significant and must be reduced in the future.

33 ADVANCED PROPULSION SYSTEMS↗

Investigation of Passive Gamma Spectroscopy to Verify Spent Nuclear Fuel Content

Measurement of passive gamma rays emitted by the decay of radioactive isotopes is a widely used and fundamental technique to verify and determine characteristics of nuclear materials. Several initiatives are currently under way to investigate the use of advanced nondestructive assay methods for application to independently measure the fissile material and plutonium content in spent nuclear fuel. Although no single technique is capable of accurately measuring the actinide inventory, the integration of multiple measures has the potential to dramatically improve nondestructive analysis capability. These methods are likely to involve the use of high-resolution gamma detectors with the resolving power necessary for isotopic identification. Recent high-resolution gamma-ray spectroscopy measurements of spent nuclear fuel rod segments performed at Oak Ridge National Laboratory provided an important opportunity to analyze and identify the dominant and minor gamma-ray signatures that can be acquired using conventional HPGe detectors. The spent fuel source and detector spectra were simulated to identify potential low-intensity gamma signatures in the fuel that could be observed with modest improvements in detector capability. The measurements represent important experimental benchmarks for code and detector model simulations that will be needed to better determine advance detector design requirements for spent fuel measurements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Temperature sensitivity of the equilibrium neutronics and accident analysis of the HTR-10

Pebble-Bed High-Temperature Gas-cooled Reactors (PB-HTGR) are moderated by the graphite in the fuel pebbles and the graphite reflector surrounding the pebble-bed. Because graphite is by far the most abundant material in PB-HTGRs and the primary moderator, accurate modeling of the graphite material, including density, impurities, and temperatures, is crucial for accurate computational modeling and simulation of these reactors. While main characteristics of the graphite components are often known, the local temperature is less well known and often averaged over all components. Here, this work studies the impact of considering accurate temperature profiles in the graphite material on the generation of a small PB-HTGR model at the state of equilibrium operation and on short-term accident progression. The fuel compositions for the PB-HTGR were determined using a jump-in equilibrium modeling method, the Axial Radial Zone Equilibrium Modeling (AR-ZEM) method. In contrast to previous work, the AR-ZEM method was used considering thermal-hydraulic feedback from the MELCOR code to determine temperatures of the fuel pebbles and the surrounding graphite reflector. The consideration of an axial and radial temperature profile in the core and reflector, as opposed to uniform material temperatures, had an impact of almost 1,300 pcm on the equilibrium core eigenvalue and caused significant differences in the discharged plutonium fuel inventory with up to 4.9% and 11.0% for Pu-239 and Pu-242, respectively. To assess the impact on short-term accident progression, two Anticipated Transient Without SCRAM (ATWS) events, a Pressurized Loss of Forced Coolant (PLOFC) and a Control Rod Withdrawal (CRW) with loss of flow, were simulated with MELCOR. The use of temperature profiles in the equilibrium core models did not reveal a significant impact on the temperature, power, or reactivity responses during the transients. In conclusion, a need for consideration of accurate temperature profiles, in particular for the graphite reflector, was found for the generation of equilibrium PB-HTGRs core models using jump-in methods, but detailed temperature profiles may not be necessary when performing conservative transient analysis.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Analysis of iron-chromium-aluminum samples exposed to accident conditions followed by quench in the QUENCH-19 experiment

The QUENCH-19 experiment was a first-of-its-kind full-bundle test simulating accident conditions followed by water quench on accident-tolerant fuel (ATF) cladding. Here, a type of FeCrAl(Y) alloy, B136Y3, was developed at Oak Ridge National Laboratory and tested at the Karlsruhe Institute of Technology using Kanthal APM corner rods, a shroud, and Kanthal AF spacer grids. Testing conditions were similar to those in QUENCH-15—which tested ZIRLO cladding behavior—so that B136Y3 and ZIRLO cladding could be compared. QUENCH-19 consisted of an initial pre-oxidation heating followed by a transient. Then, a maximum power hold, which was not present in QUENCH-15, was executed to extend the heating period for the FeCrAl(Y) rods. Finally, a rapid water quench was executed that was similar to emergency core coolant system (ECCS) actuation. Compared with the ZIRLO rods in QUENCH-15, the bundle in QUENCH-19 released significantly less H 2 (9.2 g vs. 47.6 g) and achieved a much lower maximum temperature (1455°C vs. 1880°C). Furthermore, no breakaway oxidation was observed in QUENCH-19. Metallographic mounts revealed that despite the symmetry of the setup, at elevations near the maximum temperature, cladding and thermocouples were heavily damaged, substantial melting and oxidation occurred, and the cladding underwent chemical interaction with the thermocouple sheaths. Additionally, the ZrO 2 spacers detrimentally interacted with the cladding, leading to mixed oxide debris and the full destruction of some rods. Additional failure was found in certain cooler rods that may have risen due to the high thermal expansion coefficient of FeCrAl alloys. This paper presents an analysis of this work, which suggests that FeCrAl cladding can chemically survive anticipated loss-of-coolant accident events followed by rapid ECCS quench if the correct geometry and core design are present.

36 MATERIALS SCIENCE↗

Experimental validation of 3D reconstructed pin-power distributions in full-scale BWR fuel assemblies with partial length rods

Total fission rate measurements have been performed on full-size BWR fuel assemblies of type SVEA-96 Optima2 in the framework of Phase III of the LWR-PROTEUS experimental program at the Paul Scherrer Inst.. This paper presents comparisons of calculated, nodal reconstructed, pin-wise total-fission rate distributions with experimental results. Radial comparisons have been performed for the three sections of the assembly (96, 92 and 84 fuel pins), while three-dimensional effects have been investigated at pellet-level for the two transition regions, i.e. the tips of the short (1/3) and long (2/3) partial length rods. The test zone has been modeled using two different code systems: HELIOS/PRESTO-2 and CASMO-5/SIMULATE-5. The first is presently used for core monitoring and design at the Leibstadt Nuclear Power Plant (KKL). The second represents the most recent generation of the widely applied CASMO/SIMULATE system. For representing the PROTEUS test-zone boundaries, Partial Current Ratios (PCRs) - derived from a 3D MCNPX model of the entire reactor - have been applied to the PRESTO-2 and SIMULATE-5 models in the form of 2- and 5-group diagonal albedo matrices, respectively. The MCNPX results have also served as a reference, high-order transport solution in the calculation/experiment comparisons. It is shown that the performance of the nodal methodologies in predicting the global distribution of the total-fission rate is very satisfactory. Considering the various radial comparisons, the standard deviations of the calculated/experimental (C/E) distributions do not exceed 1.9% for any of the three methodologies - PRESTO-2, SIMULATE-5 and MCNPX. For the three-dimensional comparisons at pellet-level, the corresponding standard deviations are 2.7%, 2.0% and 2.1%, respectively. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A hydride reorientation model for irradiated zirconium alloy cladding

This paper presents a hydride reorientation model for irradiated, but de-fueled, zirconium-based alloy cladding tubes for water cooled reactors subjected to temperature and stress conditions of interest to storage of commercial spent nuclear fuel under dry, inert conditions. The present development builds upon and updates an existing hydride precipitation model developed in 2003, and was motivated by recent findings that the old model underestimated the amount of radial hydrides for applied hoop stresses below 100 MPa. The data used to support the development of the new model were obtained from an NFIR-sponsored experimental program on de-fueled cladding tubes irradiated in light-water reactors. The irradiated material consisted of three types of zirconium-based alloys sampled from high burnup fuel rods: cold-worked stress-relieved (CWSR) Zircaloy-4 (Zr-4), CWSR Zirlo{sup TM}, and recrystallized annealed (RXA) Zircaloy-2 (Zr-2). The majority of the hydride re-orientation tests for the irradiated cladding specimens were conducted under constant pressure with a mean cooling rate of about 1 Celsius degree/mn. The remaining tests were conducted at slower cooling rates with the pressure being kept proportional to the temperature change during the cooling process to simulate dry storage conditions. The parameters of the hydride re-orientation model were fitted to the test data. Fitting parameters were determined for (CWSR) Zircaloy-4 (Zr-4) and CWSR Zirlo{sup TM} respectively. The cooling rate effect was empirically accounted for in the model. General good agreement between model prediction and measured radial hydride content is achieved, with a standard error less than 12 ppm. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Prediction of The TREAT Facility Power and Temperature of Sirius-2c Nuclear Propulsion Fuel Experiment

This paper presents simulation results of the Sirius-2c full power experiment that was performed at the TREAT facility to support experiment modeling and transient analysis of the NASA-sponsored Sirius series of experiments for nuclear thermal propulsion applications. We presents a novel approach to predict the control rod motion and power of the reactor and the temperature of the specimen during transient experiments using the Griffin and Bison packages of the Multiphysics Object Oriented Simulation Environment (MOOSE). First, the model predicts the transient rod motion that results in the desired reactor power shape. Then, the temperature of the specimen is predicted based on the power deposited in the specimen. The prediction results are in good agreement with the measured reactor power and control rod position and over-predicted the specimen temperature which is mainly related to specimen surface emissivities. The reactor reaches a peak power of 80 MW and a specimen temperature of 2500 K and considering the right specimen emissivities the predicted temperature is in an excellent agreement with the measured values. This model can be utilized in helping and supporting the design and optimization a new experiments that are going to be irradiated in the TREAT facility.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Position-Dependency of Fuel Assembly Homogenization in a Pressurized Water Reactor

2-step nuclear reactor core analysis has long been established as the conventional calculational procedure for the pressurized water reactor (PWR) due to its efficiency. This is because the procedure significantly avoids the potentially huge computational burden arising from an explicit geometrical modeling and consideration of over ∼ 500 energy groups. It instead approaches the problem with spatial homogenization and group condensation: a 2-D lattice transport calculation to homogenize the fuel assembly cross-sections and a 3-D whole core nodal diffusion. One notes that the few-group constant generation using deterministic method could be complicated due to its limited flexibilities in geometrical modeling and inherent drawbacks of the multi-group approximation. Furthermore, accuracy of the deterministic few-group constant generation can especially be compromised during the resonance treatment calculation. As such, an alternative lattice calculation using the Monte Carlo (MC) approach, in place of the deterministic fuel assembly homogenization (few-group constant generation), has previously been proposed. During the assembly homogenization, directions and magnitudes of the current at boundaries are unknowns. Therefore, zero net current boundary conditions (infinite lattice) are instead used as the assembly node. The assumption is quite reasonable considering heterogeneities inside the node are more dominant than heterogeneities due to nodal location in the core. In fact, this approximation has successfully been applied to many LWR core analyses to reasonable accuracy. It should nonetheless be noted that the net current zero boundary assumption effectively ignores position-dependency of the fuel assembly homogenization in the general 2-step method. As such, there are a number of well-known researches on the extended assembly homogenization techniques, which introduce correction factors to compensate effects of the assembly environment, such as Generalized Equivalence Theory (GET), Super-homogenization method (SPH), and color set calculation method. Even though the assembly environment effect has long been acknowledged, its effect has not properly been investigated due to the limited computing power in the past and due to the reasonable accuracy of the extended assembly homogenization techniques. Nonetheless, quantification of position-dependency of the assembly homogenization in the core could still potentially offer additional value in terms of calculation accuracy to the 2-step reactor analysis. It is upon this motivation that the paper is prepared. In this research, position-dependent few-group constants were calculated and compared against those of infinite lattices. All calculations were completed using the MC Serpent2 code with ENDF/B7.0 nuclear data library. In this study, position-dependency of the fuel assembly homogenized cross sections in a PWR core has been investigated through comparison of the conventional 2-step reactor analysis with the reference high fidelity Monte Carlo simulation. It was found that the homogenized two-group constants are clearly position-dependent as the discrepancies between infinite lattice and whole-core calculations are quite significant especially in a rodded assembly. As such, the corresponding correction required due to the assembly environment effect is not negligible compared to the correction required due to assembly heterogeneity itself. It is therefore quite clear that position-dependency of the group cross sections should be considered in the 2-step procedure for a more accurate PWR core analysis. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Design and full core fuel performance assessment of high burnup cores for 4-loop PWRs

Increasing the fuel discharge burnup of current light water reactors (LWRs) promises reductions in fuel cycle and/or operations costs. By assuming a constant core power density, the economic gain is enabled by better fuel utilization and/or an increased capacity factor. In this effort to investigate greater than 62 MWd/kgU maximum rod average burnup for 110+ kW/l core power density, two core designs have been developed for a standard 17x17, 193 fuel assemblies pressurized water reactor (PWR). The levelized unit cost methodology is employed to evaluate fuel cycle, operation and maintenance, and capital cost impacts and to examine the economic viability of both core design pathways. Core design and optimization are performed using the commercial STUDSVIK code package. Fuel performance analysis is realized in full core configuration via auditing FRAPCON4.1, FAST1.2, and the high-fidelity code BISON. To provide a realistic assessment, the core design process takes into consideration best practices in current PWR core design. It features acceptable performance in terms of various core design constraints on maximum allowable peaking and boron concentration. Gadolinia (Gd2O3) is used as a burnable poison with a maximum of 9 wt% concentration while feeding 89 or 77 fuel assemblies in a 3-batch refueling scheme. Full core fuel performance simulation, which allows for characterization of relevant fuel temperatures, plenum pressures, stresses, and strains, is performed with respect to two bounding burnup levels. Such performance is potentially licensable for the 18-month high burnup core (<68 MWd/kgU peak pin), while it is more challenging for the 24-month high burnup core design pathway (<75 MWd/kgU peak pin). Maximum rod plenum pressure is identified as the most limiting fuel performance parameter. Here, while the scope of the present study focuses on the steady-state plus overpower conditions, the acceptability of the new discharge burnup has to be further assessed by considering uncertainties and impacts under accident scenarios in the future.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Application of Advanced Methods to Predict Grid to Rod Fretting in PWRs

Advanced modeling and simulation methods are being developed as part of the US Department of Energy sponsored Nuclear Energy Modeling and Simulation Hub called CASL (Consortium for Advanced Simulation of LWRs). The key participants of the CASL team include Oak Ridge National Laboratory (lead), Idaho National Laboratory, Sandia National Laboratories, Los Alamos National Laboratory, Massachusetts Institute of Technology, North Carolina State University, University of Michigan, Electric Power Research Institute, Tennessee Valley Authority and Westinghouse Electric Corporation. One of the key objectives of the CASL program is to develop multi-physics methods and tools which evaluate neutronic, thermal-hydraulic, structural mechanics and nuclear fuel rod performance in rod bundles to support power uprates, increased burnup/cycle length and life extension for US nuclear plants.

Karoutas, Zeses↗

Fiscal Year (FY) 2017 Activities for the Spent Fuel Nondestructive Assay Project

The main focus of research in the NA-241 spent fuel nondestructive assay (NDA) project in FY17 has been completing the fabrication and testing of two prototype instruments for upcoming spent fuel measurements at the Clab interim storage facility in Sweden. One is a passive instrument: Differential Die-away Self Interrogation-Passive Neutron Albedo Reactivity (DDSI), and one is an active instrument: Differential Die-Away-Californium Interrogation with Prompt Neutron (DDA). DDSI was fabricated and tested with fresh fuel at Los Alamos National Laboratory in FY15 and FY16, then shipped to Sweden at the beginning of FY17. Research was performed in FY17 to simplify results from the data acquisition system, which is complex because signals from 56 different 3He detectors must be processed using list mode data. The DDA instrument was fabricated at the end of FY16. New high count rate electronics better suited for a spent fuel environment (i.e., KM-200 preamplifiers) were built specifically for this instrument in FY17, and new Tygon tubing to house electrical cables was purchased and installed. Fresh fuel tests using the DDA instrument with numerous configurations of fuel rods containing depleted uranium (DU), low enriched uranium (LEU), and LEU with burnable poisons (Gd) were successfully performed and compared to simulations.1 Additionally, members of the spent fuel NDA project team travelled to Sweden for a “spent fuel characterization and decay heat” workshop involving simulations of spent fuel and analysis of uncertainties in decay heat calculations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Numerical modeling of two-phase behavior in the PEFC gas diffusion layer

A critical performance limitation in the polymer electrolye fuel cell (PEFC) is attributed to the mass transport loss originating from suboptimal liquid water transport and flooding phenomena. Liquid water can block the porous pathways in the fibrous gas diffusion layer (GDL) and the catalyst layer (CL), thus hindering oxygen transport from the flow field to the electrochemically actives sites in the catalyst layer. In this paper, the study of the two phase behavior and the durability implications due to the wetting characteristics in the carbon paper GDL are presented using a pore-scale modeling framework.

30 DIRECT ENERGY CONVERSION↗

Reactivity-initiated accident simulation to inform transient testing of candidate advanced cladding

This paper leverages three-dimensional reactor-core-simulation capabilities to provide information on appropriate experimental test conditions for candidate advanced cladding materials in a control-rod-ejection event. These test conditions use three-dimensional nodal kinetics simulations of a reactivity-initiated accident (RIA) in a representative state-of-the-art pressurized water reactor with both nuclear-grade iron-chromium-aluminum (FeCrAl) and silicon-carbide (SiC-SiC)-based cladding materials. The effort yields boundary conditions for experimental mechanical tests, specifically peak cladding strain during the power pulse following the rod ejection. The impact of candidate cladding materials on the reactor kinetics behavior of RIA progression versus that of reference Zr cladding is predominantly due to differences in -1) fuel mass/volume/specific power density, -2) spectral effects due to parasitic neutron absorption, -3) control rod worth due to hardened (or softened) spectrum, and -4) initial conditions due to power peaking and neutron transport cross sections in the equilibrium cycle cores resulting from hardened (or softened) spectrum. This study shows minimal impact of SiC-SiC-based cladding configurations on the transient response versus reference Zircaloy cladding. However, the FeCrAl cladding response indicates similar energy deposition, but with significantly shorter pulses of higher magnitude. Therefore, the FeCrAl-based cases have a more rapid fuel thermal expansion rate, and the resultant pellet-cladding interaction occurs more rapidly. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Sodium-Cooled Fast Reactor Reference Plant Model

This report details the progress of Idaho National Laboratory (INL) in creating a reference plant multiphysics model for the Advanced Burner Test Reactor (ABTR). This model was developed under Task 13 of the U.S. Nuclear Regulatory Commission project “Development and Modeling Support for Advanced Non-Light Water Reactors,” and is an extension of the reference plant model developed in Task 4b, which was improved upon in the following ways. (1) The discrete ordinates method was used in lieu of the super-homogenization (SPH)-corrected diffusion approximation in order to better capture the anisotropic scattering contribution and the neutron leakage change due to thermal expansion. (2) The novel neutronic spatial discretization approach, termed the ring-heterogeneous (RH) approximation, was conceptualized and introduced to capture the differential expansion of the materials in the core. This new technique proved capable of preserving fission rates and maintaining the eigenvalue within 2.5% and 266 pcm with 9 neutron energy groups, respectively. Separating the different materials in the core enables the differential expansion of materials to be explicitly accounted for, eliminating the need for problem-specific cross-section functionalization techniques. (3) The SAM model for the core and system thermal-hydraulics analysis was updated to include 61 channels instead of just four representative ones. This enables users to obtain improved spatial resolution for sodium temperature and density scalar fields. (4) All the mesh files were created via the Multiphysics Object-Oriented Simulation Environment (MOOSE) Reactor module, eliminating all reliance on external tools for mesh creation. (5) Finally, the fuel axial expansion now leverages the HT9 and UPuZr material properties that have been validated against experimental data. The reference plant model was used to perform a full-core unprotected loss of flow (ULOF) transient calculation, including neutronics, thermal and mechanical feedback mechanisms. Future work will be devoted to further enhancements of the model. Potential improvements to the model include the addition of the control rod driveline expansion feedback and the upgrading of the support plate model so as to explicitly include 3D effects. Additionally, a Nuclear Energy Advanced Modeling and Simulation funded parallel effort has completely automated the creation of the ring-heterogeneous (RH) mesh from the fully heterogeneous (FH) geometry, thus maximizing user friendliness for the sodium fast reactor sodium-cooled fast reactor (SFR) workflow and will be incorporated in future work.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Early User Experience with BISON Fuel Performance Code

Three Fuel Modeling Exercise II (FUMEX II) LWR fuel irradiation experiments were simulated and analyzed using the fuel performance code BISON to demonstrate code utility for modeling of the LWR fuel performance. Comparisons were made against the BISON results and the experimental data for the three assessment cases. The assessment cases reported within this report include IFA-597.3 Rod 8, Riso AN3 and Riso AN4.

42 ENGINEERING↗

Flutter study of an advanced composite wing with external stores

A flutter test using a scaled model of an advanced composite wing for a Navy attack aircraft has been conducted in the NASA Langley Research Center Transonic Dynamics Tunnel. The model was a wall-mounted half-span wing with a semi-span of 6.63 ft. The wing had an aspect ratio of 5.31, taper ratio of 0.312, and quarter-chord sweep of 25 degrees. The model was supported in a manner that simulated the load path in the carry-through structure of the aircraft and the symmetric boundary condition at the fuselage centerline. The model was capable of carrying external stores from three pylon locations on the wing. Flutter tests were conducted for the wing with and without external stores. No flutter was encountered for the clean wing at test conditions which simulated the scaled airplane operating envelope. Flutter boundaries were obtained for several external store configurations. The flutter boundaries for the fuel tanks were nearly Mach number independent (occurring at constant dynamic pressure). To study the aerodynamic effect of the fuel tank stores, pencil stores (slender cylindrical rods) which had the same mass and pitch and yaw inertia as the fuel tanks were tested on the model. These pencil store configurations exhibited a transonic dip in the flutter dynamic pressure, indicating that the aerodynamic effect of the actual fuel tanks on flutter was significant. Several flutter analyses methods were used in an attempt to predict the flutter phenomenon exhibited during the wind-tunnel test. The analysis gave satisfactory predictions of flutter for the pencil store configurations, but unsatisfactory correlation for the actual fuel tank configurations.

Cole, Stanley R.↗