Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Energy proportionality”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Cosmic-Ray Detectors With Interdigitated Electrodes

Detectors measure both positions of incidence and energies of incident charged particles. Stack of detector wafers intercept cosmic ray. Measure positions of incidence to determine cosmic-ray trajectory and charge generated within them (proportional to cosmic-ray energy dissipated within them). Interdigital electrode pattern repeated over many rows and columns on tops of detector wafers in stack. Electrode pattern defines pixels within which points of incidence of incident cosmic rays located.

Cunningham, Thomas J.↗

The cosmic X-ray experiment aboard HEAO-1

The HEAO-1 A-2 experiment, designed to study the large scale structure of the galaxy and the universe at X-ray energies is described. The instrument consists of six gas proportional counters of three types nominally covering the energy ranges of 0.15-3 keV, 1.2-20 keV, and 2.5-60 keV. The two low energy detectors have about 400 sq cm open area each while the four others have about 800 sq cm each. Dual field of view collimators allow the unambiguous determination of instrument internal background and diffuse X-ray brightness. Instrument characteristics and early performance are discussed.

Rothschild, R. E.↗

Estimating Total Energy Consumption and Emissions of China's Commercial and Office Buildings

Buildings represent an increasingly important component of China's total energy consumption mix. However, accurately assessing the total volume of energy consumed in buildings is difficult owing to deficiencies in China's statistical collection system and a lack of national surveys. Official statistics suggest that buildings account for about 19% of China's total energy consumption, while others estimate the proportion at 23%, rising to 30% over the next few years. In addition to operational energy, buildings embody the energy used in the in the mining, extraction, harvesting, processing, manufacturing and transport of building materials as well as the energy used in the construction and decommissioning of buildings. This embodied energy, along with a building's operational energy, constitutes the building's life-cycle energy and emissions footprint. This report first provides a review of international studies on commercial building life-cycle energy use from which data are derived to develop an assessment of Chinese commercial building life-cycle energy use, then examines in detail two cases for the development of office building operational energy consumption to 2020. Finally, the energy and emissions implications of the two cases are presented.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

X-Ray Detector for 1 to 30 keV

Array of silicon X-ray detecting diodes measures photon energy and provides image of X-ray pattern. Regardless of thickness of new X-ray detector, depletion region extends through it. Impinging X-rays generate electrons in quantities proportional to X-ray energy. X-ray detector is mated to chargecoupled-device array for image generation and processing. Useful in industrial part inspection, pulsed-plasma research and medical application.

Alcorn, G.↗

Estimated U.S. Energy Use in 2010: Contributions from Fossil, Nuclear, and Renewable Energy

A diagram of major energy sources for each sector of the U.S. economy depicted as flows in a Sankey diagram. Proportions of fossil, nuclear, and renewable energy provided for electricity generation and ultimately used by the residential, industrial, commercial, and transportation sectors of the economy are shown. This diagram rearranges and segregates information originally published by Lawrence Livermore National Laboratory, based on data from the Energy Information Administration's Annual Energy Review, 2010.

environmental & water↗

Excitation of neutron star normal modes during binary inspiral

As a compact binary inspirals due to the emission of gravitational waves, its orbital period decreases continuously down to approximately 1 ms, its value at coalescence. During the last part of the inspiral, the two stars are close together, and their tidal interactions become strong. Neutron stars have many normal modes (core g-modes, crustal discontinuity modes, shear modes, etc.) whose periods lie in the range (approximately several ms) swept by the orbital period. Some of these modes are resonantly excited by the tidal force. The amount of energy a mode absorbs is proportional to the square of the overlap integral between its displacement field and the tidal force field. For all modes of interest, this overlap is poor, resulting in relatively weak excitation. For the best case, the absorbed energy is only a small fraction (approximately 10(exp -6)) of the orbital energy, so the orbital phase shift is too weak to be detected by observations of the gravitational wave signal emitted by the inspiraling binary. However, with displacement amplitudes of excited quadrupole modes ranging up to 0.5% of the stellar radius, the possibility of a detectable electromagnetic signature cannot be dismissed. Both the periods of the modes and the energy they absorb depend quite strongly on the internal structure of the star. Their observation could shed light on the correct high-density equation of state.

Reisenegger, Andreas↗

Measurements of the linear energy transfer spectra on the Mir orbital station and comparison with radiation transport models

A tissue equivalent proportional counter designed to measure the linear energy transfer spectra (LET) in the range 0.2-1250 keV/micrometer was flown in the Kvant module on the Mir orbital station during September 1994. The spacecraft was in a 51.65 degrees inclination, elliptical (390 x 402 km) orbit. This is nearly the lower limit of its flight altitude. The total absorbed dose rate measured was 411.3 +/- 4.41 microGy/day with an average quality factor of 2.44. The galactic cosmic radiation (GCR) dose rate was 133.6 microGy/day with a quality factor of 3.35. The trapped radiation belt dose rate was 277.7 microGy/day with an average quality factor of 1.94. The peak rate through the South Atlantic Anomaly was approximately 12 microGy/min and nearly constant from one pass to another. A detailed comparison of the measured LET spectra has been made with radiation transport models. The GCR results are in good agreement with model calculations; however, this is not the case for radiation belt particles and again points to the need for improving the AP8 omni-directional trapped proton models.

Mir Project↗

TOWARD UNDERSTANDING THE COSMIC-RAY ACCELERATION AT YOUNG SUPERNOVA REMNANTS INTERACTING WITH INTERSTELLAR CLOUDS: POSSIBLE APPLICATIONS TO RX J1713.7-3946

Using three-dimensional magnetohydrodynamic simulations, we investigate general properties of a blast wave shock interacting with interstellar clouds. The pre-shock cloudy medium is generated as a natural consequence of the thermal instability that simulates realistic clumpy interstellar clouds and their diffuse surrounding. The shock wave that sweeps the cloudy medium generates a turbulent shell through the vorticity generations that are induced by shock-cloud interactions. In the turbulent shell, the magnetic field is amplified as a result of turbulent dynamo action. The energy density of the amplified magnetic field can locally grow comparable to the thermal energy density, particularly at the transition layers between clouds and the diffuse surrounding. In the case of a young supernova remnant (SNR) with a shock velocity {approx}> 10{sup 3} km s{sup -1}, the corresponding strength of the magnetic field is approximately 1 mG. The propagation speed of the shock wave is significantly stalled in the clouds because of the high density, while the shock maintains a high velocity in the diffuse surrounding. In addition, when the shock wave hits the clouds, reflection shock waves are generated that propagate back into the shocked shell. From these simulation results, many observational characteristics of the young SNR RX J1713.7-3946 that is suggested to be interacting with molecular clouds can be explained as follows. The reflection shocks can accelerate particles in the turbulent downstream region where the magnetic field strength reaches 1 mG, which causes short-time variability of synchrotron X-rays. Since the shock velocity is stalled locally in the clouds, the temperature in the shocked cloud is suppressed far below 1 keV. Thus, thermal X-ray line emission would be faint even if the SNR is interacting with molecular clouds. We also find that the photon index of the {pi}{sup 0}-decay gamma rays generated by cosmic-ray protons can be 1.5 (corresponding energy flux is {nu}F{sub {nu}}{proportional_to}{nu}{sup 0.5}) because the penetration depth of high-energy particles into the clumpy clouds depends on their energy. This suggests that, if we rely only on the spectral study, the hadronic gamma-ray emission is indistinguishable from the leptonic inverse Compton emission. We propose that the spatial correlation of the gamma-ray, X-ray, and CO line-emission regions can be conclusively used to understand the origin of gamma rays from RX J1713.7-3946.

79 ASTRONOMY AND ASTROPHYSICS↗

A Frequency Domain Multiplexing Technique for Multi-Channel Detector Instrumentation

Radiation detection often requires several detectors to be employed at once. Normally, each detector outputs a signal that must be transported, digitized, and stored. One common format for these signals is a finite, aperiodic pulse. Since the detector and data acquisition system are not necessarily physically close, transporting signals from several detectors to a central data acquisition system often requires the use of many cables. The technique presented here allows for the combination and later recovery of a number of analog detector signals using a single cable, by shifting their content to narrow bands in the frequency domain and summing them together into a single channel for transmission. The output is a linear combination of decaying sinusoids, whose peak frequencies and bandwidths in the frequency domain are controlled by inductor, resistor, and capacitor values in the circuit. By separating the outputs by several megahertz, and lowering the bandwidth to about 1 MHz, we can isolate each signal. The timing of the original input can be recovered by taking the inverse Fourier transform of the isolated peak and identifying the start time of the resulting single decaying sinusoid. The energy of the input signal is proportional to the square root of the integral of the corresponding power spectrum peak. We show that energy spectra can be reconstructed with minimal additions to energy resolution. We also show that coincidence timing measurements can be performed with an uncertainty smaller than 2 ns. The result is an N to 1 reduction in cabling, with obvious cost and complexity gains. Since most of the signal content exists only in a band around each peak frequency, noise outside of these bands does not impact the performance.

Belling, Samuel↗

Techno-Economic Analysis of Repurposing Natural Gas Transmission Pipeline Networks to Accommodate Hydrogen Blends

Blending hydrogen into natural gas infrastructure could supplement natural gas supply and increase resilience for applications such as ammonia production, peaking and load-following power plants, and heating. The United States has an extensive network of natural gas pipelines, but the feasibility of employing this infrastructure to transport hydrogen is unclear. We analyze the costs associated with repurposing three distinct natural gas transmission pipelines in different locations within the United States to carry blends of hydrogen up to 100% via three different pipeline network modification methods and compare against the cost of building a new dedicated hydrogen pipeline. We conduct a sensitivity analysis on the hoop stress limit of the existing pipe, techno-economic parameters, emissions, and relative capacity. The results show that the capital costs required to upgrade a pipeline can vary from tens of millions to billions of dollars depending on the length and capacity of the existing pipeline section, whether the existing pipeline already operates at or below its maximum allowable operating pressure, whether future demand is expected to increase or decrease, the network modification method selected, and pipe material costs. The delivered cost of energy to end users is impacted less by the levelized cost of transporting hydrogen blends than by the cost of the natural gas and hydrogen fuels being transported. The emissions impact of blending hydrogen into natural gas transmission networks scales proportionally with the amount of energy displaced with low-emission hydrogen (such as from natural gas with carbon capture and sequestration or electrolysis powered by nuclear, renewable, or geothermal electricity), therefore low blend ratios (e.g., < 20% vol. hydrogen) will result in low emissions impacts. Factors such as permitting and right-of-way costs, the proximity of the pipeline to hydrogen demand and production, and the compatibility of and/or retrofitting costs of end-use gas-fueled technologies will likely be greater drivers in determining whether converting a particular natural gas pipeline to carry hydrogen makes economic sense.

08 HYDROGEN↗

ENERGY DEPOSITION PROFILES AND ENTROPY IN GALAXY CLUSTERS

We report the results of our study of fractional entropy enhancement in the intracluster medium (ICM) of the clusters from the representative XMM-Newton cluster structure survey. We compare the observed entropy profile of these clusters with that expected for the ICM without any feedback, as well as with the introduction of preheating and cooling. We make the first estimate of the total, as well as radial, non-gravitational energy deposition up to r {sub 500} for this large, nearly flux-limited, sample of clusters. We find that the total energy deposition corresponding to the entropy enhancement is proportional to the cluster temperature (and hence cluster mass). The energy deposition per particle scaled by T {sub sp}, {Delta}E/T {sub sp} has a similar profile in all clusters, and is more pronounced in the central regions. Our results support models of entropy enhancement through active galactic nucleus feedback.

79 ASTRONOMY AND ASTROPHYSICS↗

Boron-10 Lined Proportional Counter Wall Effects

The Department of Energy Office of Nuclear Safeguards (NA-241) is supporting the project 'Coincidence Counting With Boron-Based Alternative Neutron Detection Technology' at Pacific Northwest National Laboratory (PNNL) for development of an alternative neutron coincidence counter. The goal of this project is to design, build and demonstrate a boron-lined proportional tube based system in the configuration of a coincidence counter. This report provides information about how variations in proportional counter radius and gas pressure in a typical coincident counter design might affect the observed signal from boron-lined tubes. A discussion comparing tubes to parallel plate counters is also included.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Scaling relations in the phase-space structure of dark matter haloes

We present new scaling relations for the isotropic phase-space distribution functions (DFs) and energy distributions of simulated dark matter haloes. These relations are inspired by those for the singular isothermal sphere with density profile $\rho (r)\propto r^{-2}$, for which the DF satisfies $f(E) \propto r_{\mathrm{max}}^{-2}(E)$ and the energy distribution satisfies $\mathrm{ d}M/\mathrm{ d}E \propto r_{\mathrm{max}}(E)$, with $r_{\mathrm{max}}(E)$ being the radius where the gravitational potential equals energy $E$. For the simulated haloes, we find $f(E)\propto r_{\mathrm{max}}^{-2.08}(E)$ and $\mathrm{ d}M/\mathrm{ d}E \propto r_{\mathrm{max}}(E)$ across broad energy ranges. In addition, the proportionality coefficients depend on the gravitational constant and the parameters of the best-fitting Navarro–Frenk–White density profile. These scaling relations are satisfied by haloes over a wide mass range and provide an efficient method to approximate their DFs and energy distributions. Understanding the origin of these relations may shed more light on halo formation.

galaxies: haloes↗

Boron-10 Lined Proportional Counter Model Validation

The Department of Energy Office of Nuclear Safeguards (NA-241) is supporting the project “Coincidence Counting With Boron-Based Alternative Neutron Detection Technology” at Pacific Northwest National Laboratory (PNNL) for the development of an alternative neutron coincidence counter. The goal of this project is to design, build and demonstrate a boron-lined proportional tube-based alternative system in the configuration of a coincidence counter. This report discusses the validation studies performed to establish the degree of accuracy of the computer modeling methods current used to simulate the response of boron-lined tubes. This is the precursor to developing models for the uranium neutron coincidence collar under Task 2 of this project.

born lined tubes↗

Hard X-rays from NGC 4151: A thermal origin?

We present a model for explaining the recent combined X-ray and low-energy gamma-ray observations of the Seyfert galaxy NGC 4151. According to this model, soft photons become Comptonized in a hot spot producing simultaneously the low-energy power law as observed by Ginga and the high-energy cutoff observed by the Oriented Scintillation Spectrometer Experiment (OSSE). Implementing recently developed theoretical calculations toward a generalized theory of Comptonization, we were able to find fits to the observations using only two parameters which characterize the physical quantities of the emission region: the plasma cloud optical depth and its temperature. We find that there is no need for additional nonthermal, reflection, or higher temperature thermal components to fit the aforementioned OSSE and Ginga observations. We derive in addition the size of the photon region and the temperature of the upscattered soft photons. We should emphasize, also, that any attempt at fitting only the high-energy parts of the spectrum (photon energies greater than 60 keV) by the Sunyaev & Titarchuk (1980) nonrelativistic Comptonization model leads to an underestimate of the Comptonization parameter y (or, equivalently, to an overestimation of the X-ray power-law spectral slope) and leads, as a result, to incorrect proportions between the low-energy and high-energy parts of the spectrum.

Titarchuk, Lev↗

Decoupling of heat generated from ejected and non-ejected contents of 18650-format lithium-ion cells using statistical methods

Effective thermal management systems, designed to handle the impacts of thermal runaway (TR) and to prevent cell-to-cell propagation, are key to safe operation of lithium-ion (Li-ion) battery assemblies. Critical factors for optimizing these systems include the total energy released during a single cell TR event and the fraction of the total energy that is released through the cell casing versus through the ejecta material. A unique fractional thermal runaway calorimeter (FTRC), designed to characterize said critical factors, was utilized to examine the TR behavior of 18650-format Li-ion cells representing a variety of manufacturers, chemistries, capacities, and safety features. Primarily, the impacts of bottom vent (BV) safety features, varied cell casing thickness, and Dreamweaver cellulose based separators were assessed for select cell types. A subset of cells also had an imbedded internal short circuiting (ISC) device to allow examination of TR behavior initiated at lower temperatures (i.e. closer to field failure conditions). The impact of bottom rupture on TR behavior was also examined for experiments that resulted in this non-standard failure mechanism. Statistical analysis of the results for each cell configuration reveals that a lognormal distribution effectively characterizes the variation of total TR energy release. Typically 20%-30% of the total energy yield is released through the cell casing with the remainder through the ejecta material. Higher energy cells tend to exhibit more violent ejections and less predictable TR events. Inclusion of a BV feature reduces the overall severity of the TR event and can increase the predictability. Results also suggest that the magnitude of the TR event may not be directly proportional to the stored electrical energy, but rather has additional dependence on other design and failure mode factors.

25 ENERGY STORAGE↗

Upward shower rates at neutrino telescopes directly determine the neutrino flux

We show that the rate for upward showers from an isotropic cosmic neutrino flux at neutrino telescopes like IceCube is independent of the neutrino-nucleon cross section. For bins that span a relatively narrow range in energy, neither scaling the cross section, nor changing its power-law energy behavior affects the upward shower rate, which depends only on the flux. The neutrino flux can be completely known since its spectral shape can be determined by comparing the rates in neighboring bins. We also show that the downward shower rate varies linearly with cross section with a proportionality constant determined by the energy dependence of the cross section, independent of the power-law behavior of the flux. The normalization and energy dependence of the cross section can be found by comparing the downward rates in neighboring bins.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗