Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Energy absorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Combinatorial investigation of structural and optical properties of cation-disordered ZnGeN 2

Cation-disordered ZnGeN 2 shows promise for application as a blue-green emitter in light-emitting devices, but more foundational work is necessary to understand structure–property relationships. In this work, we present a combinatorial exploration of the experimental phase space of wurtzite (cation-disordered) ZnGeN 2 using high-throughput co-sputtering. Structure, morphology and optical properties are explored as a function of cation composition and synthesis temperature. ZnGeN 2 is found to crystallize in the wurtzite structure ranging from Zn-rich to Ge-rich compositions. X-ray diffraction refinements reveal a continuous shift in cell volume with off-stoichiometry, indicating alloy-like structural behavior. Furthermore, the optical absorption of all films examined is lower in energy than the value predicted for cation-ordered ZnGeN 2 , suggesting that cation disorder is decreasing the bandgap. Additionally, the absorption threshold shifts continuously to higher energy for Ge-rich samples, consistent with bandgap shifts due to alloy-like structural behavior. Defect formation energy diagrams are calculated to help guide understanding of off-stoichiometry from a defect complex perspective. This work paves the way toward use of ZnGeN 2 as a bandgap-tunable optoelectronic semiconductor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Hot Carrier Redistribution, Electron-Phonon Interaction, and Their Role in Carrier Relaxation in Thin Film Metal-Halide Perovskites

Temperature dependent (4–295 K) photoluminescence and transmission spectra are analyzed to study the effect of changing the different components of a perovskite compound, be it A, B, or X. Four different films are compared: FAMAPbSnI3, FAPbI3, FAMAPbI3, and FAPbBr3. The low temperature results highlight the changes that occur, especially underlying ones that are easily masked at room temperature. The overall Stokes shift is of similar magnitude at room temperature for the three Pb only based samples. This is governed by the interaction strength GLO, phonon energy ELO, and exciton binding energy Eex. One exception to this behavior is the Sn based FAMAPbSnI3 film, which shows a lack of Stokes shift between the absorption and photoluminescence. However, the strong absorption (more than 100 meV) below the band gap is indicative of an excitonic feature that has a large density of states. Transient absorption measurements confirm the trends observed in continuous wave (CW) measurements; the three Pb only films all show the convolution of an excitonic feature within 20 meV of the band gap as a contributing factor to the photobleach along with a region of high energy photoinduced absorption (PIA). However, the behavior for the Sn based film is notably different (just as it is in the CW measurements) with an unusual low energy PIA and a lack of high energy PIA. The large unusual low energy PIA is attributed to the large sub-band-gap absorption observed in the CW transmission/absorption measurements. Notably, regardless of interchanging components, the slow cooling of carriers in metal-halide perovskites shows little effect of GLO, ELO, and Eex. As such, here it is proposed that while the initial cooling of carriers is attributed to LO phonons, the overall cooling of carriers is dominated by the intrinsic low thermal conductivity of all metal-halide perovskites, which limits the dissipation of acoustic phonons in these systems

2D perovskites↗
DOE OSTI2025

First-Principles Simulations Correlating X-ray Absorption Spectroscopy Features to Point Defects in h -BN

Hexagonal boron nitride (h-BN) is a promising material for a range of emerging applications in electronics, quantum information technology, and energy storage. Soft X-ray absorption spectroscopy (XAS) is powerful to reveal atomic details of BN, especially in the presence of defects. However, correlating XAS spectral features with specific defect types remains elusive. In this Letter, we report B K-edge XAS measurements of sputter-deposited turbostratic h-BN films and use a combination of first-principles spectroscopic simulations and analysis of detailed electronic structure and local charge transfer characteristics to elucidate their unique spectroscopic features. Our results show that the two main defect-related peaks, between the main π* resonances of h-BN and B2O3, as typically observed in BN films deposited by energetic condensation or bombarded with energetic ions, are associated with electronic states of H-passivated B atoms bonded to one and two oxygen impurity atoms, respectively. These conclusions hold significant implications for applications relying on defect-mediated properties of h-BN.

chemical structure↗
DOE OSTI2025

Stimulated Emission from Below the Bandgap in Giant Quantum Shells

Colloidal semiconductor nanocrystals (NCs) have emerged as promising candidates for developing solution-processable optical gain media, with potential applications in integrated photonic circuits and lasers. However, the deployment of NCs in these technologies has been hindered by nonradiative Auger recombination of multiexciton states, which shortens the optical gain lifetime and reduces its spectral range. Here, we demonstrate that these limitations can be overcome by using giant colloidal quantum shells (g-QSs), comprising a quantum-confined CdSe shell grown over a large (~14 nm) CdS bulk core. Such bulk-nanoscale architecture minimizes exciton–exciton interactions, leading to suppressed Auger recombination and one of the broadest gain bandwidths reported for colloidal nanomaterials, spanning energies both above and, remarkably, below the bandgap. Ultrafast transient absorption and photoluminescence measurements demonstrate that the high-energy portion of optical gain arises from states containing more than 15 excitons per particle while the unusual sub-bandgap gain behaviour results from an Auger-assisted radiative recombination, a mechanism that has traditionally been viewed as a loss pathway. Altogether, these results reveal a unique gain regime associated with bulk-nanocrystal hybrid systems, which offers a promising path toward solution-processable light sources.

Absorption↗
DOE OSTI2023

Calculated solvent reorganization entropies, free energies, and fluctuations of the energy gaps for intramolecular electron transfer and excitation of the solvatochromic dye B30

Intramolecular electron transfer between two biphenyl groups linked by an androstane spacer and excitation of the pyridinium-N-phenolate betaine dye B30 to the first excited singlet state are studied by quantum/classical molecular-dynamics simulations at temperatures between 150 and 300 K in solvents with a range of polarities. Temperature dependences of the solvent reorganization energies, free energies, entropies, and the inhomogeneous broadening of B30’s absorption band are examined. The variances of fluctuations of the energy gap between the reactant and product states do not have the direct proportionality to temperature that often is assumed to hold. An explanation for the observations is suggested.

Chemistry↗
DOE OSTI2024

Coatings for CSP Lifetime

The feasibility and performance of tower-technology-based concentrated solar power (CSP) is highly dependent on the efficiency of the energy transformation from sun to heat at the receiver. The higher the solar absorptivity of the receiver coating, the higher the efficiency of the plant as a whole. BrightSource Energy (BSE) has developed a series of High-Performance Coating (HPC) systems in order to achieve high absorptivity over the plant lifetime (25-35 years). This requires stable coatings that are easily applicable on the large receiver surface and will maintain their optical properties under intense solar flux and thousands of heating and cooling cycles in desert conditions. Different coating formulations are required according to the differing plant conditions: receiver materials, operating conditions (temperatures, daily cycles, etc.), and environmental conditions. BSE also developed a coating for the next generation of CSP receivers, such as those being under DOE’s CSP Gen3 program, which will be operated with high temperature heat transfer fluids at temperatures of up to 800°C, which is significantly hotter than the operating temperature of current systems. Once the coating is formulated, the next challenge is evaluating its lifetime properties. BSE has found several independent failure modes that impact HPC absorptivity degradation: • Decrease in HPC optical properties due to oxidation in the receiver tubes surface below the HPC; • HPC film deterioration due to cycling of temperatures and humidity due to daily operation startup and shutdown as well as changing ambient conditions; • Mechanical degradation due to erosion by sand and wind. Existing test methods examine various aspects independently, but do not provide a combined accelerated lifetime result. Creating such a combined test suite, with a way to interpret the results to predict the coating’s projected lifetime, was the ultimate goal of this project. The project was divided into three major workstreams: lab testing (individual failure mode tests and combined failure mode tests); developing a theoretical model for aging; and validation of the test apparatus via on-sun testing in near real-world conditions at CIEMAT-PSA. Developing a test apparatus that accurately controlled the temperature while also introducing the desired solar flux proved more challenging than expected. While in the end we did succeed in creating a test apparatus that can control temperature, solar flux, and humidity, the results did not appear to accelerate the lifetime of the samples as desired. We suspect that to properly accelerate the samples we must also subject the samples to increased amounts of oxygen. Similarly, while we successfully created a combined model that is publicly available, we were unable to validate it sufficiently to feel comfortable recommending it as a general guideline.

14 SOLAR ENERGY↗
DOE OSTI2021

Second-order nonlinear optical and linear ultraviolet-visible absorption properties of the type-II multiferroic candidates RbFe( A O 4 ) 2 ( A = Mo, Se, S)

Motivated by the search for type-II multiferroics, in this work, we present a comprehensive optical study of a complex oxide family of type-II multiferroic candidates: RbFe(MoO 4 ) 2 , RbFe(SeO 4 ) 2 , and RbFe(SO 4 ) 2 .We employ rotationalanisotropy second harmonic generation spectroscopy (RA SHG), a technique sensitive to point symmetries, to address discrepancies in literature-assigned point/space groups and to identify the correct crystal structures. At room temperature we find that our RA SHG patterns rotate away from the crystal axes in RbFe(AO 4 ) 2 ( A = Se, S), which identifies the lack of mirror symmetry and in-plane two-fold rotational symmetry. Also, the SHG efficiency of RbFe(SeO 4 ) 2 is two orders of magnitude stronger than RbFe(AO 4 )2 ( A = Mo, S), which suggests broken inversion symmetry. Additionally, we present temperature-dependent linear optical characterizations near the band edge of this family of materials using ultraviolet-visible absorption spectroscopy. Included is experimental evidence of the band gap energy and band gap transition type for this family. Subband gap absorption is also presented, which reveals prominent optical transitions, some with an unusual central energy temperature dependence. Furthermore, we find that by substituting the A site in RbFe(AO 4 ) 2 ( A = Mo, Se, S), the aforementioned transitions are spectrally tunable. Finally, we discuss the potential origin and impact of these tunable transitions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Carbon Fiber and Polymer Composites

Tooling is an integral part of composites manufacturing. Composite tools, also called ‘soft’ tools, are more easily constructed than ‘hard’ metal tools and, because they are made from materials similar to the manufactured composite part, they can be made in-house and have a good co-efficient of thermal expansion match. However, as the ‘soft’ designation suggests, they are more vulnerable to wear and typically find application in relatively low-volume production. Additive manufacturing of thermoplastics has proven to be a lucrative option that can help improve the tooling functionalities, as it offers more design flexibility. Owing to the inherent nature of additive manufacturing, the possibility of printing sensors within the tool material and at proximity to otherwise inaccessible areas of the tool become a reality. Continuous carbon fiber (CCF)-reinforced three-dimensional (3D) printing of engineering thermoplastics has proven to be a viable option to strengthen a part well beyond the ideal moduli of unmodified thermoplastic. Furthermore, adding nanotubes or graphene to the thermoplastic matrix will also improve both the thermal conductivity and interlaminar shear strength within the tool. Carbon nanotubes (CNTs) and carbon fibers (CFs) are microwave susceptors; exploiting the physics of Joule heating to increase the energy efficiency of tool hardening and cure rates is a core goal of this project. Because of the rapid volumetric heating enabled by the absorption of microwave or radio frequency energy and electromagnetic (EM) annealing presents an attractive opportunity to significantly reduce manufacturing cycle times while improving part performance.

Craps, Matthew G.↗
DOE OSTI2024

Electron-beam-based Compton scattering x-ray source for probing high-energy-density physics

The physics basis for an electron-beam-based Compton scattering x-ray source is investigated for single-shot experiments at the major high-energy-density facilities, such as the Omega Laser Facility, National Ignition Facility, and Z pulsed power facility. A source of monoenergetic ( δ ε / ε < 5 % ) 10- to 50-keV x rays can be produced by scattering of a short-pulse optical laser by a 23- to 53-MeV electron beam and collimating the scattered photons. The number and spectrum of scattered photons are calculated as a function of electron packet charge, electron and laser pulse duration, laser intensity, and collision geometry. A source delivering greater than 10 10 photons in a 1-mm-radius spot and 100-ps time resolution is plausible with the available electron gun and laser technology. Applications of this source for x-ray diffraction, x-ray imaging, x-ray absorption fine structure, and x-ray absorption spectroscopy in high-energy-density physics experiments are described, demonstrating significant advancements compared to the present state of the art. Published by the American Physical Society 2024

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Bicarbonate-Carbonate Selectivity through Nanofiltration for Direct Air Capture of Carbon Dioxide

Direct air capture (DAC) of carbon dioxide is one approach among many proposed that is capable of offsetting hard-to-avoid emissions. In previous work, we developed the alkalinity concentration swing (ACS) method, which is driven through concentrating an alkaline solution that has been loaded with atmospheric CO 2 by desalination technologies, such as reverse osmosis or capacitive deionization. Though the ACS is promising in terms of energy usage and implementation, its absorption rate and water requirements are infeasible for a large-scale DAC process. Here, we propose an improvement on the ACS, the bicarbonate-enriched alkalinity concentration swing (BE-ACS), which selects bicarbonate ions from a stream of aqueous alkaline solution that has absorbed atmospheric CO 2 . The bicarbonate-rich stream is then concentrated, which greatly increases its CO 2 partial pressure, and then CO 2 is extracted from solution. We experimentally investigate the use of pressure-driven nanofiltration (NF) membrane-based separation to select bicarbonate ions over carbonate ions. We screen commercial membranes and select one high-performance membrane for detailed studies, quantifying its bicarbonate-carbonate selectivity factor and bicarbonate-passage factor. Feed pH, the combined concentration of aqueous CO 2 , bicarbonate, and carbonate species (or dissolved inorganic carbon), alkalinity, and permeation flux are systematically varied to study NF separation properties. We find that the selectivity factor, which exceeds 30 times in certain regimes, increases with higher feed pH and higher alkalinity. Lastly, the performance metrics of the selected NF membrane are input into a theoretical BE-ACS cycle analysis, and the required energy input and cycle capacity output are evaluated. Ideal cycle energy is found to be as low as around 250 kJ/mol, with opportunities identified for further decreases through process engineering and forward osmosis energy recovery.

animal feed↗
DOE OSTI2020

Improving Energy Transfer within Metal–Organic Frameworks by Aligning Linker Transition Dipoles along the Framework Axis

Crystalline metal-organic frameworks (MOFs) can assemble chromophoric molecules into a wide range of spatial arrangements, which are controlled by the MOF topology. Like natural light-harvesting complexes (LHCs), the precise arrangement modulates interchromophoric interactions, in turn determining excitonic behavior and migration dynamics. To unveil the key factors that control efficient exciton displacements within MOFs, we first developed linkers with low electronic symmetry (as defined by large transition dipoles) and then assembled them into MOFs. These linkers possess extended conjugation along one molecular axis, engendering low optical bandgaps and improved oscillator strength for their lowest-energy transition (S 0 → S 1 ). This enhances absorption-emission spectral overlap and boosts the efficiency of Forster resonance energy transfer, which was observed experimentally by a sizable decrease in emission quantum yield (QY), accompanied by a faster population decay profile. We find that MOFs that orient these elongated linkers along their asymmetric pore channel, e.g., the hexagonal pores in an xly network, manifested >50% decrease in their emission QY with faster decay profiles relative to their corresponding solution dissolved linkers. This is due to an efficient migration of photogenerated excitons at the crystallite peripheral sites to internal sites, which was facilitated by polarized absorption-emission overlap among the parallelly aligned linkers. In contrast, symmetric MOFs, such as those with sqc-a topological net, orient elongated linkers along two perpendicular crystal axes, which hinders efficient exciton migration. This study underscores that MOFs are promising to develop artificial LHCs, but that to achieve an efficient exciton displacement, appropriate topology-guided assembly is required to fully realize the true potential of linkers with low electronic symmetry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Coupled Charge and Radiation Transport Processes in Thermophotovoltaic and Thermoradiative Cells

Accurate modeling of charge transport and both thermal and luminescent radiation is crucial to the understanding and design of radiative thermal energy converters. Charge-carrier dynamics in semiconductors are well-described by the Poisson-drift-diffusion equations, and thermal radiation in emitter-absorber structures can be computed using multilayer fluctuational electrodynamics. These two types of energy flows interact through radiation absorption or luminescence and charge-carrier generation or recombination. However, past research has typically only assumed limited interaction, with thermal radiation absorption as an input for charge-carrier models to predict device performance. To examine this assumption, we develop a fully coupled iterative model of charge and radiation transport in semiconductor devices, and we use our model to analyze near-field and far-field GaSb thermophotovoltaic and thermoradiative systems. By comparing our results with past methods that do not consider cross-influences between charge and radiation transport, we find that a fully coupled approach is necessary to accurately model photon recycling and near-field enhancement of external luminescence. As these effects can substantially alter device performance, our modeling approach can aid in the design of efficient thermophotovoltaic and thermoradiative systems.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Selenium Migration and Local Structures in Cu‐Doped CdSeTe Solar Cells after Aging

Selenium grading plays a critical role in state-of-the-art Cadmium Telluride photovoltaic cells by enhancing long-wavelength absorption and extending minority carrier lifetimes —key to enabling the current performance record of 23.08%. However, very little is understood about selenium motion. In this study, a comprehensive, multimodal, and multiscale approach is employed to investigate Se migration and local structural changes in copper (Cu)-doped CdSeTe solar cells subjected to accelerated stress. X-ray fluorescence (XRF) microscopy shows unexpected levels of Se diffusion after 500 h under heat (75°C) and light (0.8 suns, 80 mW/cm 2 ), suggesting the coexistence of fast and slow diffusion channels even at low temperatures, with unexpectedly low activation energies (<0.85 eV). X-ray Absorption Near Edge Structure (XANES) analysis indicates a preferential migration of Se atoms to anionic lattice sites and a reduction in Se-Cl co-passivation at Te-terminated dislocation cores. Furthermore, these findings point to a reconfiguration of Se local environments and highlight the potential role of extended structural defects in enabling Se transport at low temperatures. Additionally, XANES results suggest that the presence of metallic Cu across the absorber layer may contribute to back-contact degradation and reduced hole density in both fresh and aged devices.

14 SOLAR ENERGY↗
DOE OSTI2023

Redox Mechanisms and Migration Tendencies in Earth-Abundant 0.7Li 2 MnO 3 ·0.3LiFeO 2 Cathodes: Coupling Spin-Resolved X-ray Absorption Near Edge and X-ray Absorption Fine Structure Spectroscopies

We report the use of iron 1s3p resonant X-ray emission processes to conduct spin-selective, high-energy resolution fluorescence detected X-ray absorption near-edge spectroscopy (HERFD-XANES) on an iron-containing, lithium- and manganese-rich, fully earth-abundant cathode material, Li 1.3 Mn 0.5 Fe 0.2 O 2 (0.7Li 2 MnO 3 ·0.3LiFeO 2 ). Coupling this technique with conventional Mn K-edge XANES and detailed extended X-ray absorption fine structure (EXAFS) analysis from both the Mn and Fe vantage points, we gain fundamental insights into the redox processes and migration tendencies of transition metals in this cathode material at the bulk level. We show that during the first charge, Fe 3+ undergoes oxidation to form Fe 4+ prior to the activation plateau. Toward the end of activation, a significant fraction of the iron is present as tetrahedral Fe 3+ . This observation reveals that iron migration from octahedral to tetrahedral sites and iron reduction are initiated during activation. Upon first discharge from the activated state, a continuous and overlapping reduction of both Fe and Mn is observed, with Fe largely restored back as an octahedrally coordinated Fe 3+ . The manganese local environment gradually changes to a distorted cooperative Jahn–Teller Mn 3+ structure during discharge, with the clear presence of two Mn–O as well as two Mn–Mn correlation distances at 2.0 V. The significant reduction of manganese in the very first discharge is distinctly different from that seen in typical nickel-based lithium-manganese-rich materials but is similar to that observed for pure Li 2 MnO 3 . In conclusion, these findings shed light on key structure–property correlations in the cathode material and point to a causative relationship between the redox mechanisms as well as structural changes endured by the material and relatively poor performance during extended electrochemical cycling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Thermomechanical analysis and modeling of a high-temperature light trapping planar cavity solar receiver

The development of durable particle-based high-temperature solar receivers is critical for advancing concentrating solar-thermal (CST) technologies to enable high-efficiency power generation and industrial process heat. Here, this study presents a computational framework to evaluate the thermomechanical performance of a proposed enclosed light-trapping planar cavity receiver designed for particle-based thermal energy systems. The receiver incorporates absorptive cavities and fluidized particle-bed channels to enhance heat capture and reduce thermal losses. Finite element analysis (FEA) is employed to assess stress, strain, and creep-fatigue behavior under concentrated solar flux using realistic thermal boundary conditions derived from coupled system models and experimental assembly parameters. The analysis investigates the influence of particle-to-wall heat transfer coefficients (HTC) ranging from 800 to 1800 W/m 2 .K on the thermomechanical response of six candidate high-temperature alloys: Alloy 740H, Alloy 282, Alloy 617, 316H, Alloy 230, and 800H. Results show that increasing HTC reduces thermal gradients, leading to lower stresses and strains and extended minimum predicted creep life. While all materials satisfy fatigue life requirements under the investigated conditions, significant differences in creep resistance are observed. Alloy 740H consistently exhibits the longest minimum predicted creep life and the most favorable durability margins, followed by Alloy 282, with the remaining materials showing reduced creep resistance under identical loading. The reported creep lives are conservative lower-bound estimates intended for comparative material evaluation. This framework highlights the critical roles of material selection and geometry optimization in improving mechanical durability and reliability of solar-thermal receivers, forming a foundation for future experimental validation and design optimization.

14 SOLAR ENERGY↗
DOE OSTI2026

Pressure-Induced Metal-like Transport and Magnetoresistance in a Au 2+ –Au 3+ Halide Perovskite

The Cs 4 Au II Au III 2 Cl 12 perovskite (1), featuring AuCl 4 trimers separated by vacancies, enables the first high-pressure study of Au 2+/3+ mixed-valence. Our computational analysis of the gold frontier orbitals suggests that the Au 2+ →Au 3+ intervalence charge transfer (IVCT) occurs across the vacancies. Computational structures indicate that these vacancies rapidly shrink with pressure and the Au 2+ and Au 3+ coordination spheres become very similar at the phase transition to nearly cubic symmetry at ca. 15 GPa─enabling facile IVCT. Although the activation energy of conductivity of 0.73(4) meV and far-infrared absorption indicate a small but nonzero bandgap, ambient thermal energy drives the IVCT, affording metallic properties: prominent infrared reflectivity and transport values of 10 2 S·cm –1 . This prompted us to perform the first high-pressure studies of magnetoresistance (MR) and Hall effect in halide perovskites. At 16 GPa, the MR increases by 9.3% at 2 K and 9 T; this value is maintained up to 27 GPa, when a local distortion drives electronic localization. By globally fitting the MR and Hall resistance to a two-carrier model we quantify how the carrier densities and mobilities evolve with pressure. Thus, metal-like transport and MR in 1 is driven by a pressure-induced transition from localized to partially delocalized mixed-valence.

Deschene, Christina R. [Stanford University, CA (U↗
DOE OSTI2022

Mechanisms of shape transfer and preheating in indirect-drive double shell collisions

Implosions of Hohlraum-driven double shell targets as an alternative inertial confinement fusion concept are underway at the National Ignition Facility. The double shell system relies on a series of energy transfer processes starting from thermal x-ray absorption by the outer shell, followed by collisional transfer of kinetic energy to a heavy metal inner shell, and finally, conversion to the internal energy of the deuterium-tritium fuel. During each of these energy transfer stages, low-mode asymmetries can act to reduce the ideal transfer efficiency degrading double shell performance. Mechanisms, such as hard x-ray preheat from the Hohlraum, not only decrease the efficiency of kinetic energy transfer but may also be a source of low-mode asymmetry. In this article, we evaluate the shape transfer processes through the time of shell collision using two-dimensional integrated Hohlraum and capsule computations. We find that the dominant mode of the shape transfer is well described using a “radial impulse” model from the shape of the foam pressure reservoir. To evaluate the importance of preheat on inner shell shape, we also report on first measurements of Au L-shell preheat asymmetry in a double shell with a tungsten pusher. These measurements showed a 65% higher preheat velocity at the pole of the capsule relative to the equator. We also found that the experiments provided rigorous constraints by which to test the Hohlraum model settings that impact the amount and symmetry of Au L-shell preheat via the plasma conditions inside the outer cone Au bubble.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Hydrodynamic expansion and near-infrared absorption of x-ray heated aluminum plasmas

We use x-ray pulses from dense argon plasmas at the Z Machine (Sandia National Laboratories) to generate hypersonic aluminum plasmas akin to material ejecta during proposed planetary defense missions, fusion reactor wall excursions, and other high-energy density processes. Near-infrared absorption is used to diagnose the controlled expansion of the plasmas through cylindrical cavities following their generation from x-ray heating of solid aluminum 7075 alloy. The data are compared to multidimensional radiation hydrodynamics simulations utilizing the ALEGRA multiphysics code, accounting for the dynamics of radiation scattering, material phase change, plasma expansion, thermal re-irradiation, and interactions with the cavity and with the infrared beams. To allow for accurate simulation, density functional theory is used to apply the Hagen–Rubens relation for the far-infrared and is adjoined with a detailed configuration accounting model using the Propaceos code, producing opacities spanning 10 −1 –10 4 eV photon energy for aluminum 7075 alloy, and in comparison with pure aluminum. The model is found to agree with experimental data in the higher-fluence regime when the Hagen–Rubens relation is applied. The ejected material, which is observed to travel up to 55 km/s, is comprised of a strongly ionized, non-LTE plasma front at ∼10 eV temperature followed by a weakly ionized LTE gas at higher density. The present findings lend some confidence to the broad-range equation of state and infrared opacity models for weakly ionized aluminum plasmas while demonstrating an approach to their future refinement, with potential application to astrophysical plasmas and other extreme processes.

Adiabatic process↗