Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Element”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Multi-Element Water Content System Instrument Handbook

The SEA Model WCM-2000 multi-element water content system was designed to provide aircraft and wind tunnel users with a single, rugged sensor to simultaneously measure liquid water content (LWC), total water content (TWC), and ice water content (IWC). The instrument consists of four heated stainless steel elements, each with a different shape or size. Each element is directly heated by low-voltage DC current flowing through the element. These elements are maintained at a constant temperature, typically 140°C, by a digital closed-loop control system. Three of the heated elements are exposed directly to the airstream and incoming cloud water. A fourth element, the reference/comp element, is arranged to be exposed to the airflow but not to incoming cloud water. This element is used to establish the “dry power term” that is subtracted from the other three elements’ power readings to establish the measured water content.

54 ENVIRONMENTAL SCIENCES↗

Involute Working Group – FSI Analysis of Fuel Plates Using Finite Volume and Finite Element Methods

The three involute plate research reactors RHF, HFIR, and FRM II have expressed an interest in using computational software to carry their steady-state safety analysis. Since these tools represent a significant departure from the methods used currently (one-dimensional), the acceptability of the new approach by regulators requires thorough verification and validation of these tools. Therefore, Argonne National Laboratory and the three involute-plate reactors formed an informal group called the Involute Working Group aiming at qualifying computational tools to perform steady-state safety analysis. The present report focuses on a comparison of finite volume and finite element methods to model solids in fluid-structure interaction problems with the goal to estimate the coolant flow-induced fuel plate deflections obtained with the two methods. The finite volume method will be obsoleted in STARCCM+ by the end of 2021, nevertheless, this evaluation is important because the method was used by ANL researchers to model the response of the fuel plates, despite its drawbacks, which are discussed in the report. It was essential to check how those estimates compare to the results obtained with the finite element method that is considered superior for structural analysis. Various geometries, i.e., flat, cylindrical and circle-involute fuel plates, as well as coolant flow speed, were considered. The comparison shows that, independently of the plate geometry, the finite volume method significantly underestimates the deflection as compared to finite element method for coarser meshes. When the discretization is developed as a result of a mesh sensitivity study using finite element method, the result obtained using finite volume method can be a few times smaller than the corresponding finite element method solution. A code-to-code comparison , between STAR-CCM+ and LS-DYNA was included in the analysis. Within the LS-DYNA models, two types of finite element formulations were used: solid and shell finite elements. Mesh sensitivity study showed that both approaches converge to a similar value that was obtained with STAR-CCM+ finite element solver. The evaluation of the computational solvers was extended by adding two benchmark cases from the STAR-CCM+ Verification Suite and presented in the Appendix A. The selected cases are: (1) bending of a cantilever beam under external load, and (2) cylindrical shell deformation analysis, known in the literature as ‘Scordelis-Lo roof’. The problems were solved with finite volume, and finite element methods, and the results confirmed the previously discussed findings. The analysis shows that the finite element solver is superior to the finite volume solver in terms of representation of model geometry and estimating the structural behavior of fuel plates. Depending on the ratio of the load to the flexibility of the plate, the finite volume solver can greatly under- or overestimate the structural response if a very carefully selected mesh is not used.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Superheavy Elements in Kilonovae

Abstract As LIGO-Virgo-KAGRA enters its fourth observing run, a new opportunity to search for electromagnetic counterparts of compact object mergers will also begin. The light curves and spectra from the first “kilonova” associated with a binary neutron star merger (NSM) suggests that these sites are hosts of the rapid neutron capture (“ r ”) process. However, it is unknown just how robust elemental production can be in mergers. Identifying signposts of the production of particular nuclei is critical for fully understanding merger-driven heavy-element synthesis. In this study, we investigate the properties of very neutron-rich nuclei for which superheavy elements ( Z ≥ 104) can be produced in NSMs and whether they can similarly imprint a unique signature on kilonova light-curve evolution. A superheavy-element signature in kilonovae represents a route to establishing a lower limit on heavy-element production in NSMs as well as possibly being the first evidence of superheavy-element synthesis in nature. Favorable NSM conditions yield a mass fraction of superheavy elements X Z ≥104 ≈ 3 × 10 −2 at 7.5 hr post-merger. With this mass fraction of superheavy elements, we find that the component of kilonova light curves possibly containing superheavy elements may appear similar to those arising from lanthanide-poor ejecta. Therefore, photometric characterizations of superheavy-element rich kilonova may possibly misidentify them as lanthanide-poor events.

79 ASTRONOMY AND ASTROPHYSICS↗

Study on the Technology for Enhancing Element Value by Neutron Transmutation in Light Water Reactors

Rare elements have been the source of industrial competitiveness. However, the production of the elements has been localized in some area in the world. In addition, they can be politically used as strategic materials. Therefore, projects have been actively ongoing to develop technologies for replacing or efficiently using rare elements. An example of the projects is Elements Strategy Initiative in Japan. Neutron transmutation by existing nuclear reactors can be utilized to produce an element by (n, γ) reaction with appropriate irradiation conditions, and has the potential to enlarge the scope of nuclear industry. Our preliminary analysis examined the ratio of the following parameters between target and transmuted elements to identify elements suitable for the transmutation: (1) Crustal abundance [%], (2) Total material requirement (TMR) [t-TMR], (3) Element price [$/g]. TMR is an index showing the total amount of material required to obtain an element. Several elements were identified by checking whether the ratios exceed 100. One of promising transmutations was Dy to Ho. However, the analysis used one-group constants assuming a typical PWR fuel pin and a neutron flux of 1.0 E14 /cm{sup 2}/s to solve burnup equations for three years irradiation time. Therefore, the purpose of this study is to examine transmutation performance for Dy to Ho by considering actual geometry of a PWR fuel assembly.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Seasonal differences in trace element concentrations and distribution in Spartina alterniflora root tissue

This study uses nanometer-scale synchrotron X-ray nanofluorescence to investigate season differences in concentrations and distributions of major (Ca, K, S and P) and trace elements (As, Cr, Cu, Fe and Zn) in the root system of Spartina alterniflora collected from Jamaica Bay, New York, in April and September 2015. The root samples were cross-sectioned at a thickness of 10 μm. Selected areas in the root epidermis and endodermis were mapped with a sampling resolution of 100 and 200 nm, varying with the mapping areas. The results indicate that trace element concentrations in the epidermis and endodermis vary among the elements measured, possibly because of their different chemical properties or their ability to act as micronutrients for the plants. Elemental concentrations (As, Ca, Cr, Cu, Fe, K, P, S and Zn) within each individual root sample and between the root samples collected during two different seasons are both significantly different (p < 0.01). Furthermore, this study indicates that the nonessential elements (As and Cr) are significantly correlated (p < 0.01) with Fe, with high concentrations in the root epidermis, while others are not, implying that Fe may be a barrier to nonessential element transport in the root system. Hierarchy cluster analysis shows two distinct groups, one including As, Cr and Fe and the other the rest of the elements measured. Factor analysis also indicates that the processes and mechanisms controlling element transport in the root system can be different between the nutrient and nonessential elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Silicon, Carbon, and Sulfur on Structure of Liquid Iron and Implications for Structure-Property Relations in Liquid Iron-Light Element Alloys

Planetary cores are considered to be composed of iron (Fe) and light elements. Extensive studies on structure and properties of crystalline Fe–light element alloys have been carried out to discuss composition and structure of the solid inner core. In contrast, structure and properties of liquid Fe–light element alloys, which are important to discuss nature and dynamics of the liquid outer core, remain poorly understood. Here we conducted series of liquid structure measurements to systematically understand effect of silicon (Si), carbon (C), and sulfur (S) on structure of liquid Fe. We found that incorporation of Si in liquid Fe shortens the nearest (r 1 ) and second (r 2 ) neighbor distances, while incorporation of C and small amount of S expands these distances. The different structural behavior is interpreted in view of different light–element incorporation mechanisms: substitutional incorporation of Si and interstitial incorporation of C and S. All light elements lower density of liquid Fe regardless of shortening or expansion of the r 1 and r 2 distances, while P–wave velocities of liquid Fe–light element alloys show linear increase with shortening of the r 1 and r 2 . The different light–element incorporation behavior in the structure of liquid Fe and the resultant variation in the properties of liquid Fe–light element alloys should be important in understanding behavior of liquid Fe–light element alloys in the planetary cores.

58 GEOSCIENCES↗

Mechanisms and Impacts of Earth System Tipping Elements

Tipping elements are components of the Earth system which may respond nonlinearly to anthropogenic climate change by transitioning toward substantially different long-term states upon passing key thresholds or “tipping points.” In some cases, such changes could produce additional greenhouse gas emissions or radiative forcing that could compound global warming. Improved understanding of tipping elements is important for predicting future climate risks and their impacts. Here we review mechanisms, predictions, impacts, and knowledge gaps associated with 10 notable Earth system components proposed to be tipping elements. We evaluate which tipping elements are approaching critical thresholds and whether shifts may manifest rapidly or over longer timescales. Some tipping elements have a higher risk of crossing tipping points under middle-of-the-road emissions pathways and will possibly affect major ecosystems, climate patterns, and/or carbon cycling within the 21st century. However, literature assessing different emissions scenarios indicates a strong potential to reduce impacts associated with many tipping elements through climate change mitigation. The studies synthesized in our review suggest most tipping elements do not possess the potential for abrupt future change within years, and some proposed tipping elements may not exhibit tipping behavior, rather responding more predictably and directly to the magnitude of forcing. Nevertheless, uncertainties remain associated with many tipping elements, highlighting an acute need for further research and modeling to better constrain risks.

58 GEOSCIENCES↗

Stiffness and Mass Matrices of FEM-Applicable Dynamic Infinite Element with Unified Shape Basis

This paper is devoted to the construction and evaluation of mass and stiffness matrices of elastodynamic four and five node infinite elements with unified shape functions (EIEUSF), recently proposed by the author. Such elements can be treated as a family of elastodynamic infinite elements appropriate for multi-wave soil-structure interaction problems. The common characteristic of the proposed infinite elements is the so-called unified shape function, based on finite number of wave shape functions. The idea and the construction of the unified shape basis are described in brief. This element belongs to the decay class of infinite elements. It is shown that by appropriate mapping functions the formulation of such an element can be easily transformed to a mapped form. The results obtained using the proposed infinite elements are in a good agreement with the superposed results obtained by a series of standard computational models. The continuity along the finite/infinite element line (artificial boundary) in two-dimensional substructure models is also discussed in brief. In this type of computational models such a line marks the artificial boundary between the near and the far field of the model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Review of footnotes and annotations to the 1949–2013 tables of standard atomic weights and tables of isotopic compositions of the elements (IUPAC Technical Report)

Abstract The Commission on Isotopic Abundances and Atomic Weights uses annotations given in footnotes that are an integral part of the Tables of Standard Atomic Weights to alert users to the possibilities of quite extraordinary occurrences, as well as sources with abnormal atomic-weight values outside an otherwise acceptable range. The basic need for footnotes to the Standard Atomic Weights Table and equivalent annotations to the Table of Isotopic Compositions of the Elements arises from the necessity to provide users with information that is relevant to one or more elements, but that cannot be provided using numerical data in columns. Any desire to increase additional information conveyed by annotations to these Tables is tempered by the need to preserve a compact format and a style that can alert users, who would not be inclined to consult either the last full element-by-element review or the full text of a current Standard Atomic Weights of the Elements report. Since 1989, the footnotes of the Tables of Standard Atomic Weights and the annotations in column 5 of the Table of Isotopic Compositions of the Elements have been harmonized by use of three lowercase footnotes, “g”, “m”, and “r”, that signify geologically exceptionally specimens (“g”), modified isotopic compositions in material subjected to undisclosed or inadvertent isotopic fractionation (“m”), and the range in isotopic composition of normal terrestrial material prevents more precise atomic-weight value being given (“r”). As some elements are assigned intervals for their standard atomic-weight values (applies to 12 elements since 2009), footnotes “g” and “r” are no longer needed for these elements.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Gas-mediated trace element incorporation into rhyolite-hosted topaz: A synchrotron microbeam XAS study

Magmatic gas exsolving during late-stage cooling of shallow magmas has been considered an important facilitator of low-pressure alteration and metal transport. However, the chemical properties of such gas, particularly its metal transport mechanisms and capacity, remain elusive. Trace elements in minerals produced by gas-mediated surface reaction or precipitation from gas capture details of gas composition and reaction pathways. However, interpretation of mineral trace element contents is dependent on understanding crystallographic controls on gas/mineral partitioning. Here, this work investigates the structural accommodation of As, Mn, Ga, Ge, Fe, and Ti in vapor-deposited topaz of vesicular topaz rhyolite from the Thomas Range, Utah, through single-crystal synchrotron microbeam X-ray techniques on picogram quantities of those trace elements. X-ray absorption near edge structure (XANES) data indicates that these elements are incorporated into topaz as As 5+ , Fe 3+ , Mn 3+ , Ti 4+ , Ga 3+ , and Ge 4+ . Extended X-ray absorption fine structure (EXAFS) analysis for these trace elements, compared to EXAFS of structural Al and Si, reveals that As 5+ and Ge 4+ are incorporated directly into the tetrahedral site of the topaz structure, with the octahedral site accommodating Mn 3+ , Fe 3+ , Ga 3+ , and Ti 4+ . For As 5+ and Fe 3+ , the structural impact of substitution extends to at least second neighbors (other elements were only resolvable to first neighbors). Further interpretation of the EXAFS results suggests that the substitution of Ti 4+ results in increased distortion of the octahedral site, while the other trace elements induce more uniform expansion correlating in magnitude to their ionic radius. Comparison of quantified X-ray fluorescence (XRF) data for two topaz crystals from this rhyolite reveals variable trace element concentrations for As 5+ , Fe 3+ , Ga 3+ , and Ti 4+ , reflective of a source gas undersaturated in these trace elements changing in concentration over the period of topaz deposition. The identical Ge 4+ content of the two topaz crystals suggests that Ge 4+ in the gas was buffered by the growth of another Ge 4+ -bearing phase, such as quartz. The very low Mn 3+ content in the topaz crystals does not reflect the abundance of Mn 3+ in the gas (saturation of Mn is evidenced by coexisting bixbyite). Instead, it suggests a strong Jahn-Teller inhibitory effect to the substitution of Mn 3+ for Al 3+ in the distorted octahedral site of topaz. It is proposed that exsolution of an HF-enriched gas from cooling rhyolitic magma led to local scouring of Al, Si, and trace metals from the magma. Once topaz crystals nucleated, self-catalyzed reactions that recycle HF led to continued growth of topaz.

36 MATERIALS SCIENCE↗

Recovery of Rare Earth Elements from Coal Mining Waste Materials

The objective of this proposed project was to locate coal overburden material that had rare earth elements (REEs) at concentrations of 300 ppm or higher. After securing the feedstock the next goal was to efficiently extract and purify the feedstocks to a purity of greater than 95%. A techno economic analysis was conducted to determine the economic viability of mining and processing REEs associated with Appalachian coal deposits. All aspects of mining, mineral processing, by-product potential, waste management, permitting and economics were examined. Attention was paid to the separation, degree of purification and marketing of Rare Earth elements. Along with REEs we evaluated the economics of the recovery of other metals of interest aong with the REEs. Our site location chosen was at the Jeddo Coal Site near Hazleton, Pennsylvania. The primary site was at the Upper Leigh High Mine. However, that changed to the North Eckley Mine site. We have analyzed a third site that will now be our second alternative to North Eckley. That site is the Highland mine site. This site is in a similar basin as the North Eckley site. During this project we evaluated various acids and extraction conditions. We have settled on using HCl as the acid of choice. One of the advantages of using HCl is it allows for easy removal of the highest contaminating metal, iron. When iron reacts with HCl in the presence of high chlorides it creates the anion complex FeCl 4 -1 . This FeCl 4 -1 complex will bind with an anion exchange resin. Greater than 99.8% of the iron is removed with this technique. Once the FeCl 4 -1 complex is bound to the anion exchange resin it can be released easily by just passing water over it. This water dilutes the FeCl 4 -1 to form FeCl 3 which is not anionic and therefore not attracted to the anion exchange resin. The FeCl 3 solution is a popular water flocculating agent used all over the world for water purification. We plan on this being one of our products produced. One of our goals was to create a multipurpose facility that was capable of handling multiple feedstocks. The proposed multipurpose facility will be able process all coal biproducts and coal products. These include 1.) clays that can easily be leached with ion exchange or acid 2.) Hard mineral deposits that can be leached with high pressure acid digestion 3.) Fly ash can be leached in the high-pressure acid digestion reactor. Fly ash is not a focus of this proposal but, the beneficial aspect of its utilization in this design cannot be overlooked. 4.) Acid Mine Drainage (AMD) Sludge is a high source of REE’s and can easily be dissolved to form a pregnant leach solution. Not shown on this simplified block flow diagram but crucial to its success is the recycle of acids. Our REE separation system is a continuous ion exchange process. The first stage is the separation of the non-REEs from the REEs. This is accomplished because the REEs are relatively larger than most of the non-REEs and typically have higher oxidation states (+3) than the non-REEs. In this step all the elements stick onto the column. However, as the columns are rinsed with various concentrations of acids different elements come off. For example, monovalent elements such as sodium and potassium elute off the column with a 1M HCl solution. Divalent elements such as calcium and magnesium do not elute until a 2M HCl solution is passed over the columns. The trivalent elements (REEs) are not eluted until a much higher concentrated acid is passed of the columns. Iron is also a trivalent, but it was removed in a prior anion exchange system. Aluminum is trivalent too, but it is much smaller than the REE atoms and elutes near the end of the 2 M HCl with the divalents. At the stage 2 and 3 our volume and masses have become too small to run on the continuous system. Therefore, we used a batch chromatography column or a flash chromatography column. The stage 2 process separates these REEs into 3 different fractions. A light, mid and heavy fraction. We calculated that we recovered greater than 90% of the REEs. This third column was packed with a different stationary phase. Five elements were chosen and purified to higher than 95% purity as shown by our internal testing. These elements were shipped to the DOE.

01 COAL, LIGNITE, AND PEAT↗

Preserving Superconvergence of Spectral Elements for Curved Domains via $h$ and $p$-Geometric Refinement

Spectral element methods (SEM), extensions of finite element methods (FEM), have emerged as significant techniques for solving partial differential equations in physics and engineering. SEM can potentially deliver superior accuracy due to the potential superconvergence in nodal solutions for well-shaped tensor-product elements. However, the accuracy of SEM often degrades in complex geometries due to geometric inaccuracies near curved boundaries and the loss of superconvergence with simplicial or non-tensor-product elements. To overcome the first issue, we propose using h- and p-geometric refinement, which refines the mesh near high-curvature regions and increases the degree of geometric basis functions, respectively. We show that when using mixed-element meshes with tensor-product elements in the interior of the domain, curvature-based geometric refinement near boundaries can improve the accuracy of the interior elements by reducing pollution errors and preserving the superconvergence in nodal solutions. To address the second issue, we introduce a post-processing technique using the adaptive extended stencil finite element method (AES-FEM) to recover the accuracy near the curved boundaries. The combination of curvature-based geometric refinement and accurate post-processing offers an effective and easier-to-implement alternative to methods reliant on exact geometries. We demonstrate our techniques by solving the convection-diffusion equation in 2D and show up to two orders of magnitude of improvement in the solution accuracy, even when the elements are poorly shaped near boundaries.

97 MATHEMATICS AND COMPUTING↗

A conformal decomposition finite element method for modeling stationary fluid interface problems.

A method is developed for modeling fluid transport in domains that do not conform to the finite element mesh. One or more level set functions are used to describe the fluid domain. A background, non-conformal mesh is decomposed into elements that conform to the level set interfaces. Enrichment takes place by adding nodes that lie on the interfaces. Unlike other enriched finite element methods, the proposed technique requires no changes to the underlying element assembly, element interpolation, or element quadrature. The complexity is entirely contained within the element decomposition routines. It is argued that the accuracy of the method is no less than that for eXtended Finite Element Methods (XFEM) with Heaviside enrichment. The accuracy is demonstrated using multiple numerical tests. In all cases, optimal rates of convergence are obtained for both volume and surface quantities. Jacobi preconditioning is shown to remove the ill-conditioning that may result from the nearly degenerate conformal elements.

97 MATHEMATICS AND COMPUTING↗

Trace elements and heavy metals in black vultures ( Coragyps atratus ) and turkey vultures ( Cathartes aura ) in the southeastern United States

Many vulture species worldwide are declining at alarming rates due to a variety of anthropogenic causes, including exposure to pollutants and pharmaceuticals through consumption of contaminated carrion. However, little is known about the extent to which vultures are exposed to various contaminants as well as toxicity thresholds for trace elements and heavy metals. Our objective was to quantify levels of trace elements and heavy metals within black vulture (Coragyps atratus) and turkey vulture (Cathartes aura) tissues to determine the extent to which populations in the southeastern United States are exposed to carrion that contains high levels of contaminants. We collected black vulture liver samples and examined differences in trace element and heavy metal concentrations between sexes and age classes (adult and juvenile). Further, we collected 81 blood and 42 feather samples from additional black and turkey vultures and compared differences between species and age classes. We found similar element concentrations between juvenile and adult black vultures with the exception of Cu, where levels 40 were higher in juveniles compared to adults. However, we did observe substantial differences in element concentrations between species for both blood and feather samples, with black vultures generally having higher concentrations of most elements. Our data revealed higher element levels in both species compared to toxicity thresholds found in other bird of prey species, such as blood and liver toxicity threshold suggestions for Pb poisoning in Falconiformes. Further, while average contaminant levels were generally low, extreme outliers were observed for some elements, including Pb, suggesting some individuals were exposed to high levels of potentially toxic elements. In conclusion, more research is needed to better understand contaminant exposure in black and turkey vultures across a broader geographic region, as well as elucidate toxicity thresholds and non-lethal impacts of contaminant exposure in these species.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

A comprehensive first-principles study of solute elements in dilute Ni alloys: Diffusion coefficients and their implications to tailor creep rate

Diffusion regulates a vast number of materials properties and phenomena such as creep, the focus of the present work. However, a deep understanding of the effect of how each alloying element in a Ni-base superalloy affects properties such as diffusion and creep is far from complete. Here, in this study, we report temperature-dependent dilute solute diffusion coefficients and their implications to tailor the creep rate for 26 transition metal solute elements, X's, in fcc Ni using first-principles calculations. Calculations are performed using the five-frequency model for dilute solute diffusion and the nudged elastic band method within the local density approximation. Thermodynamic properties at finite temperatures for all configurations are calculated using the quasi-harmonic Debye model. In general, the fastest diffusing solute elements in Ni are found at the left side of the periodic table and the slowest diffusing solute elements are found in group VIIB. In particular, the present work indicates that the diffusivity of the dilute solute elements is correlated to the compressibility of each solute element on the respective Ni 31 X supercell, and not as strongly to the ionic radius of the solute elements, as previously suggested. Finally, results from the diffusivity study are combined with the previous results of elastic constants and stacking fault energies, and hence, a relative creep rate ratio for these 26 solute elements is modeled. It is shown that in most cases, slower diffusing solute elements provide the most creep resistance. This is true even at higher temperatures, due mainly to the solute's strong bonding with Ni atoms in the host lattice.

36 MATERIALS SCIENCE↗

Densely ionizing radiation affects DNA methylation of selective LINE-1 elements

Long Interspersed Nucleotide Element 1 (LINE-1) retrotransposons are heavily methylated and are the most abundant transposable elements in mammalian genomes. Here, we investigated the differential DNA methylation within the LINE-1 under normal conditions and in response to environmentally relevant doses of sparsely and densely ionizing radiation. We demonstrate that DNA methylation of LINE-1 elements in the lungs of C57BL6 mice is dependent on their evolutionary age, where the elder age of the element is associated with the lower extent of DNA methylation. Exposure to 5-aza-2′-deoxycytidine and methionine-deficient diet affected DNA methylation of selective LINE-1 elements in an age- and promoter type-dependent manner. Exposure to densely IR, but not sparsely IR, resulted in DNA hypermethylation of older LINE-1 elements, while the DNA methylation of evolutionary younger elements remained mostly unchanged. We also demonstrate that exposure to densely IR increased mRNA and protein levels of LINE-1 via the loss of the histone H3K9 dimethylation and an increase in the H3K4 trimethylation at the LINE-1 5′-untranslated region, independently of DNA methylation. Our findings suggest that DNA methylation is important for regulation of LINE-1 expression under normal conditions, but histone modifications may dictate the transcriptional activity of LINE-1 in response to exposure to densely IR. - Highlights: • DNA methylation of LINE-1 elements is dependent on their evolutionary age. • Densely ionizing radiation affects DNA methylation of selective LINE-1 elements. • Radiation-induced reactivation of LINE-1 is DNA methylation-independent. • Histone modifications dictate the transcriptional activity of LINE-1.

60 APPLIED LIFE SCIENCES↗

Evaluation of flow-induced plate deflection for University of Missouri research reactor low-enriched uranium fuel element

The University of Missouri Research Reactor (MURR), located on the campus of the University of Missouri in Columbia, Missouri, is one of the six United States (U.S.) High Performance Research Reactors (USHPRR), including one critical facility, that are actively collaborating with the U.S. Department of Energy (DOE) National Nuclear Security Administration (NNSA) Office of Material Management and Minimization (M3) Reactor Conversion Program to convert from highly enriched uranium (HEU, ≥20 wt% U-235) fuel to low-enriched uranium (LEU, <20 wt% U-235) fuel. A new type of very high-density LEU fuel based on a monolithic alloy of uranium and 10 wt% molybdenum (U-10Mo) is expected to allow conversion of some USHPRR, including MURR. In the design of its fuel elements, MURR is using thin parallel curved fuel plates separated by coolant channels. In this work, fluid-structure interaction (FSI) analysis of the MURR LEU fuel element is performed at the element level (as compared to the plate level analysis), which models all components of the LEU fuel element, including fuel plates and the supporting structures. Therefore, the effect of supporting structures on the flow distribution within the element and the fuel plate deflection are evaluated. In addition to the element nominal flow rate and dimensions, the tolerances in the geometry of the coolant channel and plate thickness, the effect of a comb on plate deflection, and the uncertainty of the flow rate per element are evaluated. For the LEU fuel plates, which are thinner than the current HEU plates, the predicted plate deflection is found to be small compared to the fabrication and assembly tolerances. Thus, the FSI-induced deflections are not expected to noticeably reduce the coolant flow rate or predicted safety margins in the limiting channels for the MURR LEU fuel element. In addition to the simulation work, a hydraulic performance test of the MURR LEU fuel element is currently being planned to support conversion to the use of LEU fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

From ash to oxides: Recovery of rare-earth elements as a step towards valorization of coal fly ash waste

Coal fly ash (CFA) is both a valuable waste material and a potential source of environmental contamination. The inclusion of metals such as rare-earth elements offer a possible incentive towards waste valorization if the metals can be extracted and recovered in an economical manner. Rare-earth elements (REEs) have many technological applications and are critically important in the manufacture of electric vehicles, communication devices, and industrial magnets. However, the global supply of rare-earth elements has faced shortages and price shocks. Current methods for separating and isolating individual rare-earth elements use large amounts of energy and organic solvents, raising concerns over environmental impacts. These factors have led to the investigation of nontraditional sources and separation techniques for these elements. Here, we describe a column-based system that uses a newly developed ligand-associated organosilica sorbent to concentrate and separate rare-earth elements from fly ash leachate. The fly ash used in this study originally contained 0.024 wt% rare-earth elements and the final oxide powder after enrichment contained > 10 wt% rare-earth elements, which is a enrichment of > 400 times. This process requires no additional organic solvents after the sorbent media has been synthesized, offering an alternative to the current standard using solvent extraction for rare-earth element recovery.

42 ENGINEERING↗