Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ERUPTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Kink Oscillation of a Flux Rope During a Failed Solar Eruption

We report a decaying kink oscillation of a flux rope during a confined eruptive flare, observed off the solar limb by SDO/AIA, that lacked a detectable white-light coronal mass ejection. The erupting flux rope underwent kinking, rotation, and apparent leg–leg interaction during the event. The oscillations were observed simultaneously in multiple AIA channels at 304, 171, and 193 Å, indicating that multithermal plasma was entrained in the rope. After reaching the overlying loops in the active region, the flux rope exhibited large-amplitude, decaying kink oscillations with an apparent initial amplitude of 30 Mm, period of about 16 min, and decay time of about 17 min. We interpret these oscillations as a fundamental standing kink mode of the flux rope. The oscillation polarization has a clear vertical component, while the departure of the detected waveform from a sinusoidal signal suggests that the oscillation could be circularly or elliptically polarized. The estimated kink speed is 1080 km s−1, corresponding to an Alfv'en speed of about 760 km s−1. This speed, together with the estimated electron density in the rope from our DEM analysis, ne ≈ (1.5–2.0) ×109 cm−3, yields a magnetic field strength of about 15 G. To the best of our knowledge, decaying kink oscillations of a flux rope with non-horizontal polarization during a confined eruptive flare have not been reported before. These oscillations provide unique opportunities for indirect measurements of the magnetic-field strength in low-coronal flux ropes during failed eruptions.

Pankaj Kumar↗

Future High-Resolution and High-Cadence Observations for Unraveling Eruptive Solar Features

Many of the key advances in solar science over recent decades have been strongly influenced by imaging with increasing resolution and cadence of the Sun’s atmosphere from space. There is still much room for further advances in this area in the coming decades. Here we demonstrate this potential using recent advances in observation and understanding of the features known as solar coronal jets. Modern jet studies started in the 1990s, but have progressed substantially over the past ten years. Much of this progress is due to improved resolution and cadence in imaging, along with concurrent improved magnetic field and spectroscopic observations. Moreover, it is now clear that jets are smaller-size-scale, shorter-time-scale versions of less-frequent larger solar eruptions. Jets are also likely representative of yet more numerous eruptions occurring on smaller size scales. We propose development of instrumentation focused on multi-wavelength observations of jet-sized-scale eruptive solar activity, as a window to understanding both larger-scale and smaller-scale eruptive solar events.

Alphonse C. Sterling↗

Coupled Aerosol-Chemistry Simulations of the January 2022 Eruptions of Hunga Tonga-Hunga Ha’apai in the NASA GEOS Earth System Model

The January 2022 eruptions of the underwater Hunga Tonga-Hunga Ha’apai volcano injected more than 100 Tg of water vapor and approximately 0.5 Tg of sulfur dioxide into the stratosphere. Injected materials reached as high as ~55 km in altitude, while the main plume from the eruption travelled west over Australia and the Indian Ocean between about 20 – 30 km altitude. We investigate the transport and the impact of the erupted materials in coupled aerosol-chemistry simulations performed with the NASA Goddard Earth Observing System (GEOS) Earth system model. A sulfur mechanism introduced into the Global Modeling Initiative (GMI) stratospheric-tropospheric chemistry package allows for an interactive simulation of the water vapor-chemistry impacts, and the large water vapor perturbation results in rapid conversion of sulfur dioxide to sulfate aerosol in our aerosol mechanism. We report on the results of a multi-year ensemble of simulations performed with this system that include a control ensemble (no eruption), a water vapor-only injection ensemble, and a water vapor and sulfur dioxide injection ensemble. Simulations of the near-field aerosol and chemistry transport are compared to available measurements from OMPS-LP, OMPS-NM, CALIOP, MLS, and other sensors. The extended impact of the volcanic materials on the stratospheric composition and chemistry over the next several years is further investigated in forecast simulations.

Peter Colarco↗

Breakout Reconnection and Eruption in a Double Null-point Topology

Basic Question: Why are some eruptions successful while others remain confined? • We analyzed an eruption associated with a C-class flare in a null-point topology (fan-spine/embedded bipole configuration) within NOAA AR 11791, embedded within a large pseudostreamer between two coronal holes. • About 4 hours prior, interchange reconnection at the null produced a faint jet and a B-class flare without any filament eruption. • Continued reconnection below the filament built a flux rope (FR) that rose slowly and later generated the C1.4 flare. The flux rope reconnected with pseudostreamer flux near inner null, producing a remote (third) ribbon at the base of the fan and partial ejection of the flux rope. • Multiple plasmoids appeared in two places: above the rising flux rope in the breakout current sheet (the deformed null), and in a vertical flare current sheet below the flux rope (quasiperiodic flare reconnection). • Weak, narrow, coronal and interplanetary Type-III radio bursts were also detected, suggesting that electron beams from the null were ejected into the heliosphere. • The partial FR ejected from the inner system encountered the overlying arcade and null of the big pseudostreamer higher in the corona and oscillated, but did not escape. • EUV and coronagraph images revealed a wave and a faint ejection from the pseudostreamer that propagated laterally southward with ~270 km s-1. • We suggest that the main factors leading to the confined filament eruption are (i) lack of significant breakout reconnection between the rising flux rope and the overlying arcade due to an unfavorable relative orientation of these flux systems; and/or (ii) insufficient free energy of the flux rope to overcome the tension forces of the overlying arcades.

J Karpen↗

Plasmoids, Flows, and Jets During Magnetic Reconnection in a Failed Solar Eruption

We report a detailed analysis of a failed eruption and flare in active region 12018 on 2014 April 3 using multiwavelength observations from the Solar Dynamics Observatory/Atmospheric Imaging Assembly, IRIS, STEREO, and Hinode/Solar Optical Telescope. At least four jets were observed to emanate from the cusp of this small active region (large bright point) with a null-point topology during the 2 hr prior to the slow rise of a filament. During the filament slow rise multiple plasma blobs were seen, most likely formed in a null-point current sheet near the cusp. The subsequent filament eruption, which was outside the IRIS field of view, was accompanied by a flare but remained confined. During the explosive flare reconnection phase, additional blobs appeared repetitively and moved bidirectionally within the flaring region below the erupting filament. The filament kinked, rotated, and underwent leg–leg reconnection as it rose, yet it failed to produce a coronal mass ejection. Tiny jet-like features in the fan loops were detected during the filament slow rise/preflare phase. We interpret them as signatures of reconnection between the ambient magnetic field and the plasmoids leaving the null-point sheet and streaming along the fan loops. We contrast our interpretation of these tiny jets, which occur within the large-scale context of a failed filament eruption, with the local nanoflare-heating scenario proposed by Antolin et al.

Sun: jets↗

Measurement of Surface Deformation Related to the December 2018 Mt. Etna Eruption Using Time-Series Interferometry and Magma Modeling for Hazard Zone Mapping

Mount Etna has erupted several times since it was first formed. Recently, Mount Etna began erupting again over 24–27 December 2018. Because it erupts frequently, Mount Etna should be observed on a frequent basis. From June 2018 to October 2019, 34 and 56 interferometric synthetic aperture radar (InSAR) images were acquired from the ascending and descending tracks of the Sentinel-1 satellite, respectively. We employed the Stanford Method for Persistent Scatterers (StaMPS) and a refined small baseline subset (SBAS) InSAR method to produce a surface deformation time-series map. In the time-series analysis, the phase signal remained unaltered with time. The Okada model was then applied to the result to generate a modeled interferogram, and the Q-LavHA program was run to generate a lava flow prediction model. A direct comparison of the results showed that Persistent Scatterers Interferometry (PSI)-StaMPS and the refined SBAS technique were comparable in terms of the displacement pattern, with slightly different velocity values obtained for individual points. In particular, a velocity range of −25 to 21 cm/yr was obtained from PSI-StaMPS, whereas a range of −30 to 25 cm/yr was obtained from the refined SBAS method. Upon computation of the vertical and east-west displacement components based on ascending and descending track data using both methods, deformation velocities of 51.5 and 52.5 cm/yr in the westerly direction on the western flank of Mount Etna were obtained from PSI-StaMPS and the refined SBAS method, respectively, whereas on the eastern flank, deformation toward the east was estimated to occur at a velocity of 50.1 or 54.2 cm/yr, respectively. PSIStaMPS estimated a vertical deformation velocity of −5.3 to 18.3 cm/yr, whereas the refined SBAS method produced a velocity range of approximately −7 to 19 cm/yr. The interferogram obtained via Okada modeling showed two fault sources in the 2018 Mount Etna eruption and a total volume change of approximately 12.39 × 10 6 m 3 . From the modeling results, a lava flow prediction model was generated using the Q-LavHA program. The approaches described in this study can be used by government officials, authorities, and other decision-makers to monitor and assess the risk of volcanic activity in the region.

Suci Ramayanti↗

Dispersion and Aging of Volcanic Aerosols after the La Soufriere Eruption in April 2021

Volcanic aerosols change the atmospheric composition and thereby affect weather and climate. Aerosol dynamic processes such as nucleation, condensation, and coagulation modify the shape, size, and mass of aerosol particles, which influence their atmospheric lifetime and radiative properties. Nevertheless, most models omit these processes for ash particles. In this work, we explore the ash aerosol aging and sulfate production during the first 4 days following the 2021 La Soufrière (St. Vincent) eruption with the ICON-ART model (ICOsahedral Nonhydrostatic model with Aerosol and Reactive Trace gases). Online coupling of ICON-ART with a one-dimensional volcanic plume model calculates volcanic emission, which makes it possible to resolve the different eruption phases of the noncontinuous La Soufrière eruption. We compared our simulated aerosol distribution and composition with observations from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) instrument, the Multiangle Imaging SpectroRadiometer (MISR) Research Aerosol (RA) Algorithm, and the Barbados Cloud Observatory (BCO). We show that online coupling is essential to adequately model the emissions and plume development close to the volcano. The modeled aerosol aging is in very good agreement with observations from MISR near the emission source and with CALIOP at larger distances. Furthermore, particle aging occurs faster in the troposphere than in the stratosphere due to the availability of water vapor and OH, but a layer of coated ash appears at the plume top due to faster oxidation of SO2 and lofting by aerosol-radiation interaction. This paper gives the first direct comparison of aerosol aging in volcanic eruption plumes between simulations and observations

volcanic aerosols↗

Large-scale Coronal Dimming Foreshadowing a Solar Eruption on 2011 October 1

Understanding large-scale solar eruptions requires detailed investigation of the entire system's evolution, including the magnetic environment enveloping the source region and searches for precursor activity prior to event onset. We combine stereoscopic observations from the Solar Dynamics Observatory (SDO) and STEREO-B spacecraft for several hours before a filament ejection, M1.2-class eruptive flare, and coronal mass ejection (CME) originating in NOAA active region (AR) 11305 on 2011 October 1. Two episodes of significant preeruption coronal dimming that occurred well to the southeast of the ejected filament are identified. The CME subsequently took off with a substantial component of velocity toward the dimming, which became very pronounced during eruption. We used SDO/Helioseismic and Magnetic Imager (HMI) data to reconstruct the magnetic environment of the system and found that it contains a null point near the dimming region. AR 11305 had quite complex connections to nearby ARs 11302 and 11306, as well as to other regions of decayed AR flux. The intensifying and spatially expanding precursor dimming was accompanied by southeastward rising motions of loops toward the null point and northeastward and southwestward motions of loops retracting away. These motions and the dimming are consistent with persistent magnetic reconnection occurring at the null point as it moved upward and southeastward, thereby removing a strapping magnetic field high above AR 11305. Eventually, the filament was ejected explosively toward the null point. We conclude that the breakout model for solar eruptions provides a compelling account of this event. Furthermore, we conjecture that preeruption dimmings may be much more frequent than currently recognized.

solar flares↗

Evolving Particles in the 2022 Hunga-Tonga Hunga-Ha’apai Volcano Eruption Plume

The Multi-angle Imaging SpectroRadiometer (MISR) aboard NASA’s Terra satellite observed the Hunga Tonga—Hunga Ha’apai (HTHH) 15 January eruption plume on eight occasions between 15 and 23 January 2022. From the MISR multi-angle, multi-spectral imagery we retrieve aerosol plume height geometrically, along with plume-level motion vectors, and derive radiometrically constraints on particle effective size, shape, and light-absorption properties. Parts of two downwind aerosol layers were observed in different places and times, one concentrated in the upper troposphere (11-18 km ASL), and a mid-stratosphere layer~23 –30+ km ASL. After the initial day (1/15), the retrievals identified only spherical, non-light-absorbing particles, typical of volcanic sulfate/water particles. The near-tropopause plume particles show constant, medium-small (several tenths of a micron) effective size over four days. The mid-stratosphere particles were consistently smaller, but retrieved effective particle size increased between 1/17 and 1/23, though they might have decreased slightly on 1/22. As a vast amount of water was also injected into the stratosphere by this eruption, models predicted relatively rapid sulfate particle growth from the modest amounts of SO2 gas injected by the eruption to high altitudes along with the water (Zhu et al, 2022). MISR observations up to ten days after the eruption are consistent with these model predictions. The possible decrease in stratospheric particle size after initial growth was likely caused by evaporation, as the plume mixed with drier, ambient air. Particles in the lower-elevation plume observed on 1/15 were larger than all the downwind aerosols and contained significant non-spherical (likely ash) particles.

aerosol plume height↗

Laboratory Study of the Equilibrium and Eruption of Line-Tied Magnetic Flux Ropes in the Solar Corona

Ideal magnetohydrodynamic (MHD) instabilities such as the kink instability and the torus instability are leading candidates to explain the sudden onset of eruptive events in the solar corona. These instabilities act on line-tied magnetic flux ropes--long-lived arched structures anchored to the solar surface. In spite of substantial observational and numerical research, however, the role of these instabilities in the corona remains a subject of intense debate. For this thesis, we have constructed and operated a new line-tied flux rope experiment that permits for the first time the study of both the kink and torus instabilities in the laboratory. This experiment has the following key features: (1) the arched flux rope is line-tied to two conducting footpoints; (2) the system is magnetically dominated (low-beta) with significant stored energy; (3) the system is driven quasi-statically, producing a long-lived equilibrium; and (4) the flux rope is generated within a potential (vacuum) magnetic field arcade whose decay index--the predicted torus instability control parameter--can be externally controlled. The flux ropes are diagnosed using a two-dimensional in situ magnetic probe array whose cross-section covers a substantial portion of the plasma. The central result of this thesis is that toroidal field forces, which are traditionally neglected in the analysis of coronal flux ropes, are identified for the first time as an essential contributor to both the equilibrium and the stability of line-tied flux ropes. Most importantly, experimental measurements show that a tension force derived from a self-generated paramagnetic toroidal field exerts a restoring force on the line-tied plasma and suppresses eruptive behavior in a significant portion of the parameter space. This suppression extends to regimes that are both kink and torus unstable. We find that, in order to explain the measured tension force, low aspect ratio and line-tying effects must be considered. Finally, flux rope eruptions are observed in these experiments, but only in regimes with sufficiently low external toroidal field where the tension force is reduced. These results constitute a new condition for the prediction of line-tied magnetic flux rope eruptions: that of low external toroidal field.

Magnetic Fields↗

Fast Eruption Desorption Ionization for Mass Spectrometric Analysis

Fast eruption desorption ionization (FEDI) technique was developed for simple, rapid, and sensitive analysis of various compounds. The FEDI allows three analytical modes each with the unique characteristic. The results demonstrated that non-assisted eruption was suitable for stable and volatile compounds, energetic material (EM)-assisted for nonvolatile molecules especially metal compounds, and solvent-assisted eruption for fragile molecules. High-quality mass spectra with intact ions of analytes were obtained in positive and negative ion modes. .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lightning Rings and Gravity Waves: Insights Into the Giant Eruption Plume From Tonga's Hunga Volcano on 15 January 2022

Abstract On 15 January 2022, Hunga Volcano in Tonga produced the most violent eruption in the modern satellite era, sending a water‐rich plume at least 58 km high. Using a combination of satellite‐ and ground‐based sensors, we investigate the astonishing rate of volcanic lightning (>2,600 flashes min −1 ) and what it reveals about the dynamics of the submarine eruption. In map view, lightning locations form radially expanding rings. We show that the initial lightning ring is co‐located with an internal gravity wave traveling >80 m s −1 in the stratospheric umbrella cloud. Buoyant oscillations of the plume's overshooting top generated the gravity waves, which enhanced turbulent particle interactions and triggered high‐current electrical discharges at unusually high altitudes. Our analysis attributes the intense lightning activity to an exceptional mass eruption rate (>5 × 10 9 kg s −1 ), rapidly expanding umbrella cloud, and entrainment of abundant seawater vaporized from magma‐water interaction at the submarine vent.

58 GEOSCIENCES↗

THE CONTRACTION OF OVERLYING CORONAL LOOP AND THE ROTATING MOTION OF A SIGMOID FILAMENT DURING ITS ERUPTION

We present an observation of overlying coronal loop contraction and rotating motion of the sigmoid filament during its eruption on 2012 May 22 observed by the Solar Dynamics Observatory (SDO). Our results show that the twist can be transported into the filament from the lower atmosphere to the higher atmosphere. The successive contraction of the coronal loops was due to a suddenly reduced magnetic pressure underneath the filament, which was caused by the rising of the filament. Before the sigmoid filament eruption, there was a counterclockwise flow in the photosphere at the right feet of the filament and the contraction loops and a convergence flow at the left foot of the filament. The hot and cool materials have inverse motion along the filament before the filament eruption. Moreover, two coronal loops overlying the filament first experienced brightening, expansion, and contraction successively. At the beginning of the rising and rotation of the left part of the filament, the second coronal loop exhibited rapid contraction. The top of the second coronal loop also showed counterclockwise rotation during the contraction process. After the contraction of the second loop, the left part of the filament rotated counterclockwise and expanded toward the right of NOAA AR 11485. During the filament expansion, the right part of the filament also exhibited counterclockwise rotation like a tornado.

79 ASTRONOMY AND ASTROPHYSICS↗

Tidally modulated eruptions on Enceladus: Cassini ISS observations and models

We use images acquired by the Cassini Imaging Science Subsystem (ISS) to investigate the temporal variation of the brightness and height of the south polar plume of Enceladus. The plume's brightness peaks around the moon's apoapse, but with no systematic variation in scale height with either plume brightness or Enceladus' orbital position. We compare our results, both alone and supplemented with Cassini near-infrared observations, with predictions obtained from models in which tidal stresses are the principal control of the eruptive behavior. There are three main ways of explaining the observations: (1) the activity is controlled by right-lateral strike slip motion; (2) the activity is driven by eccentricity tides with an apparent time delay of about 5 hr; (3) the activity is driven by eccentricity tides plus a 1:1 physical libration with an amplitude of about 0.°8 (3.5 km). The second hypothesis might imply either a delayed eruptive response, or a dissipative, viscoelastic interior. The third hypothesis requires a libration amplitude an order of magnitude larger than predicted for a solid Enceladus. While we cannot currently exclude any of these hypotheses, the third, which is plausible for an Enceladus with a subsurface ocean, is testable by using repeat imaging of the moon's surface. A dissipative interior suggests that a regional background heat source should be detectable. The lack of a systematic variation in plume scale height, despite the large variations in plume brightness, is plausibly the result of supersonic flow; the details of the eruption process are yet to be understood.

79 ASTRONOMY AND ASTROPHYSICS↗

EVIDENCE FOR MIXED HELICITY IN ERUPTING FILAMENTS

Erupting filaments are sometimes observed to undergo a rotation about the vertical direction as they rise. This rotation of the filament axis is generally interpreted as a conversion of twist into writhe in a kink-unstable magnetic flux rope. Consistent with this interpretation, the rotation is usually found to be clockwise (as viewed from above) if the post-eruption arcade has right-handed helicity, but counterclockwise if it has left-handed helicity. Here, we describe two non-active-region filament events recorded with the Extreme-Ultraviolet Imaging Telescope on the Solar and Heliospheric Observatory in which the sense of rotation appears to be opposite to that expected from the helicity of the post-event arcade. Based on these observations, we suggest that the rotation of the filament axis is, in general, determined by the net helicity of the erupting system, and that the axially aligned core of the filament can have the opposite helicity sign to the surrounding field. In most cases, the surrounding field provides the main contribution to the net helicity. In the events reported here, however, the helicity associated with the filament 'barbs' is opposite in sign to and dominates that of the overlying arcade.

79 ASTRONOMY AND ASTROPHYSICS↗

EXTREME ULTRAVIOLET OBSERVATIONS AND ANALYSIS OF MICRO-ERUPTIONS AND THEIR ASSOCIATED CORONAL WAVES

The Solar Terrestrial Relations Observatory EUV telescopes have uncovered small-scale eruptive events, tentatively referred to as 'mini-CMEs' because they exhibit morphologies similar to large-scale coronal mass ejections (CMEs). Coronal waves and widespread diffuse dimmings followed by the expansion of the coronal waves are the most brightly manifestations of large-scale CMEs. The high temporal and spatial resolution of the EUV data allows us to detect and analyze these eruptive events, to resolve their fine structure, and to show that the observed 'mini-waves' have a strong similarity to the large-scale {sup E}IT' waves. Here, we analyze a micro-event observed on 2007 October 17 by the Sun Earth Connection Coronal and Heliospheric Investigation EUV Imager (EUVI) in 171 A (Fe IX) with a 2.5 minute cadence. The mini-CME differs from its large-scale counterparts by having smaller geometrical size, a shorter lifetime, and reduced intensity of coronal wave and dimmings. The small-scale coronal wave develops from micro-flaring sites and propagate up to a distance of 40,000 km in a wide angular sector of the quiet Sun over 20 minutes. The area of the small-scale dimming is two orders of magnitude smaller than for large-scale events. The average speed of the small-scale coronal wave studied is 14 km s{sup -1}. Our observations give strong indications that small-scale EUV coronal waves associated with the micro-eruptions propagate in the form of slow mode waves almost perpendicular to the background magnetic field.

79 ASTRONOMY AND ASTROPHYSICS↗

ERUPTIONS FROM SOLAR EPHEMERAL REGIONS AS AN EXTENSION OF THE SIZE DISTRIBUTION OF CORONAL MASS EJECTIONS

Observations of the quiet solar corona in the 171 A ({approx}1 MK) passband of the Transition Region and Coronal Explorer (TRACE) often show disruptions of the coronal part of small-scale ephemeral bipolar regions that resemble the phenomena associated with coronal mass ejections (CMEs) on much larger scales: ephemeral regions exhibit flare-like brightenings, rapidly rising filaments carrying absorbing material at chromospheric temperatures, or the temporary dimming of the surrounding corona. I analyze all available TRACE observing sequences between 1998 April 1 and 2009 September 30 with full-resolution 171 A image sequences spanning a day or more within 500 arcsec of disk center, observing essentially the quiet Sun with good exposures and relatively low background. Ten such data sets are identified between 2000 and 2008, spanning 570 hr of observing with a total of 17,133 exposures. Eighty small-scale coronal eruptions are identified. Their size distribution forms a smooth extension of the distribution of angular widths of CMEs, suggesting that the eruption frequency for bipolar magnetic regions is essentially scale free over at least 2 orders of magnitude, from eruptions near the arcsecond resolution limit of TRACE to the largest CMEs observed in the inner heliosphere. This scale range may be associated with the properties of the nested set of ranges of connectivity in the magnetic field in which increasingly large and energetic events can reach higher and higher into the corona until the heliosphere is reached.

79 ASTRONOMY AND ASTROPHYSICS↗

CRITERIA FOR FLUX ROPE ERUPTION: NON-EQUILIBRIUM VERSUS TORUS INSTABILITY

The coronal magnetic configuration of an active region typically evolves quietly for a few days before becoming suddenly eruptive and launching a coronal mass ejection (CME). The precise origin of the eruption is still under debate. The loss of equilibrium, or an ideal magnetohydrodynamic (MHD) instability such as torus instability are among the several mechanisms that have proposed to be responsible for the sudden eruptions. Distinct approaches have also been formulated for limited cases having circular or translation symmetry. We revisit the previous theoretical approaches setting them in the same analytical framework. The coronal field results from the contribution of a non-neutralized current channel added to a background magnetic field, which in our model is the potential field generated by two photospheric flux concentrations. The evolution on short Alfvenic timescale is governed by ideal MHD. We first show analytically that the loss of equilibrium and the stability analysis are two different views of the same physical mechanism. Second, we identify that the same physics is involved in the instabilities of circular and straight current channels. Indeed, they are just two particular limiting cases of more general current paths. A global instability of the magnetic configuration is present when the current channel is located at a coronal height, h, large enough so that the decay index of the potential field, {partial_derivative}ln |B {sub p}|/{partial_derivative}ln h, is larger than a critical value. At the limit of very thin current channels, previous analysis has found critical decay indices of 1.5 and 1 for circular and straight current channels, respectively. However, with current channels being deformable and as thick as that expected in the corona, we show that this critical index has similar values for circular and straight current channels, and is typically in the range [1.1,1.3].

79 ASTRONOMY AND ASTROPHYSICS↗