Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EDL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

InSight Entry, Descent and Landing Pre-Flight Performance Predictions

On November 26, 2018, the Interior Exploration using Seismic Investigations, Geodesy and Heat Transport (InSight) lander successfully touched down on the surface of Mars. Over its seven-plus year development, NASA Langley Research Center’s (LaRC) Program to Optimize Simulated Trajectories II (POST2) was used to assess the mission’s Entry, Descent and Landing (EDL) vehicle system performance against related requirements across the full range of possible environmental and spacecraft conditions. Much of the simulation code was derived from the Phoenix mission, for which this vehicle is very similar. The InSight six degree-of-freedom simulation included models for Mars atmosphere, gravity and digital elevation maps of the landing location. Additionally, vehicle specific aerodynamic, parachute, engine, navigation sensor, flight software and landing radar models were also included. A set of dispersions for each model, as well as for additional simulation input parameters, were also included in order to provide a statistical, Monte Carlo prediction of the EDL system performance. An overview of the pre-flight performance assessments completed, including the various simulation campaigns used, will be provided. Ultimately, this work was critical in the assessment of readiness for InSight launch. A brief description of the use of this simulation in support of flight operations is also discussed.

Robert W Maddock↗

TPSAS-NF1676L-31282-DND

Several technology investments, beyond those used for robotic missions, are required to develop Mars human scale Entry, Descent, and Landing (EDL) systems. In a resource-constrained environment, studies play the critical role of identifying the most feasible technical paths and high payoff investments. One such NASA multi-directorate, multi-center study, is called the Entry, Descent and Landing Architecture Study (EDLAS). This paper presents a summary of phase two of the study conducted from October 2016 to September 2017. Study ground rules and assumptions are provided by NASA?s Human Exploration and Operations Mission Directorate (HEOMD) and include a Mars architecture and Mars surface lander payload manifests. Four unique entry technologies with the potential to deliver a specified 20 t human scale payload to the Mars surface are considered for analysis. Two of these techniques are evolutionary rigid vehicles, derived from robotic capsule missions and the space shuttle. Likewise, two revolutionary deployable vehicles are considered, the Adaptable Deployable Entry Placement Technology (ADEPT) and Hypersonic Inflatable Aerodynamic Decelerator (HIAD). This paper summarizes updates to the entry technology designs, the analysis motivation and approach, figures of merit by which the configurations are compared, and results of the analyses. Finally, findings are presented with the recommendation that two of the four configurations, one evolutionary and one revolutionary technology, continue to be studied in future human scale EDL studies.

Alicia Dwyer Cianciolo↗

Trajectory Simulation Using Multi Model Monte Carlo with Python (MXMCPy)

EDL (Entry, Descent and Landing) is the process from a vehicle approaching a surface to landing on it, such as a Mars rover approaching the planet before landing. POST2 (Program to Optimize Simulated Trajectories 2) is Langley’s primary EDL simulation tool and is used NASA-wide for simulations. POST2 can generate highly accurate results by running a precise, but time consuming, Monte Carlo (MC) simulation hundreds or thousands of times. Though POST2 can produce highly accurate results, it can take unrealistic time spans to generate these results, which has created a need to speed up the simulations. The new NASA software MXMCPy offers various ways to speed up the simulations while getting just as precise results. Instead of running high-precision POST2 simulations many times for traditional MC, MXMCPy can run fewer high-precision POST2 simulations and many less precise POST2 simulations and merge the results. MXMCPy contains 30+ different methods which will each suggest different allocations between model precision levels, which result in results of varying precision based on the POST2 simulation. I created Python and Bash code to automate the 5 steps of MXMCPy’s application to POST2. I also tested the precision of traditional Monte Carlo simulations to MXMCPy aided simulations and found that MXMCPy can achieve substantially more precise solutions at the same computer runtime. I learned Test Driven Development (TDD), a software programming workflow which involves writing computer-automated tests before writing the code which is being tested. These tests are ran every time the code is changed and they can find glitches in the code much quicker than a human can. This programming workflow saved me a lot of time because the automated tests could tell me exactly where the code had stopped working. I plan on using this software development method for future academic and professional software projects. I have greatly enjoyed my work at NASA, so I have been applying to NASA internships and Pathways positions. In addition, I plan on applying what I have learned about Test Driven Development to my computer science courses next semester

James Warner↗

In Situ Small Spacecraft Missions Utilizing Heatshield for Extreme Entry Environments Technology

There is considerable interest in utilizing Small Spacecraft beyond low Earth orbit. In November of 2018, successful data relay operations of the MarCO CubeSats during the entry, descent, and landing (EDL) of the Mars InSight mission showed the viability of using CubeSats for interplanetary missions. Additional testament to the promise of Small Spacecraft class rideshare missions is the upcoming Artemis-1 flight test that will launch thirteen 6U CubeSats, as well as the establishment of NASA’s SIMPLEx program which will conduct stand-alone planetary science missions that launch with a primary payload. It is anticipated that continued innovations in Small Spacecraft capabilities combined with small EDL systems will expand the range of potential missions to allow for in situ investigations. Recently, NASA invested in the development of a new, efficient and capable ablative thermal protection system (TPS), utilizing 3-D Weaving. The new dual layer TPS, Heatshield for Extreme Entry Environment Technology (HEEET), is tailorable, scalable, robust, mass efficient and capable of supporting in situ missions across the solar system. Combining the HEEET entry system with innovative Small Spacecraft technology will substantially expand the range of Small Spacecraft mission applications by offering the capability for high speed entry or aerocapture at destinations with atmospheres. This paper will describe the HEEET aeroshell system and highlight various mission concepts including a dual technology demonstration mission that is under development and other concepts to deliver instruments for planetary science.

Small Spacecraft↗

The Adaptable, Deployable, Entry and Placement Technology (ADEPT) Enabling Advanced Entry, Descent, and Landing Capabilities for SmallSat Missions

The Adaptable, Deployable Entry and Placement Technology (ADEPT) is a mechanically deployable low-ballistic coefficient aeroshell entry system which performs entry, descent, and landing (EDL) functions for a broad range of planetary destinations including Mars, Venus, Titan and Earth. The deployable system allows mission planners to develop an aeroshell design that is stowed like a folded umbrella, and yet prior to the EDL mission segment, transforms into a deployed, near-rigid low ballistic coefficient configuration. The ADEPT architecture is scalable from a sub-1m class to 6m diameter entry vehicles for Venus and and it has been studied at up to 15m – 20m scale for human exploration class missions. There has been growing interest in performing interplanetary missions with small spacecraft as secondary payloads and ADEPT offers small satellite mission designers the ability to consider Aeroassist technologies to expand mission applications. The ADEPT architecture introduces a new approach for entry vehicle design. It deploys a flexible 3D woven carbon fabric as the primary drag surface. It is capable of surviving high aerothermal heating during entry, while maintaining a robust impermeable membrane that provides high drag for vehicle deceleration. The ADEPT project team has advanced this decelerator technology via systems-level testing at the one meter diameter (nano-ADEPT) scale. A subsonic aeroloads test (May 2015) and a pathfinder arc-jet aeroheating test (Sept 2015) and a successful sounding rocket flight (SR-1) launch of a 0.7 meter deployed diameter ADEPT (September 2018). The SR-1 flight experiment demonstrated most of the primary end-to-end mission stages including: launch in a stowed configuration, separation and deployment in zero-g, exo-atmospheric conditions, and passive ballistic re-entry of a 70 degree half-angle cone geometry. The ADEPT SR-1 sounding rocket flight experiment had to address challenges such as stowing within the constrained payload envelope, fabric folding, and packaging concerns.

Paul Wercinski↗

In Situ Small Spacecraft Missions Utilizing Heatshield for Extreme Entry Environments Technology

There is considerable interest in utilizing Small Spacecraft beyond low Earth orbit. In November of 2018, successful data relay operations of the MarCO CubeSats during the entry, descent, and landing (EDL) of the Mars InSight mission showed the viability of using CubeSats for interplanetary missions. Additional testament to the promise of Small Spacecraft class rideshare missions is the upcoming Artemis-1 flight test that will launch thirteen 6U CubeSats, as well as the establishment of NASA’s SIMPLEx program which will conduct stand-alone planetary science missions that launch with a primary payload. It is anticipated that continued innovations in Small Spacecraft capabilities combined with small EDL systems will expand the range of potential missions to allow for in situ investigations. Recently, NASA invested in the development of a new, efficient and capable ablative thermal protection system (TPS), utilizing 3-D Weaving. The new dual layer TPS, Heatshield for Extreme Entry Environment Technology (HEEET), is tailorable, scalable, robust, mass efficient and capable of supporting in situ missions across the solar system. Combining the HEEET entry system with innovative Small Spacecraft technology will substantially expand the range of Small Spacecraft mission applications by offering the capability for high speed entry or aerocapture at destinations with atmospheres. This paper will describe the HEEET aeroshell system and highlight various mission concepts including a dual technology demonstration mission that is under development and other concepts to deliver instruments for planetary science.

Heatshield↗

Spacecraft-to-Earth communications for Juno and Mars Science Laboratory critical events

This paper describes the Entry, Descent, and Landing (EDL) Data Analysis (EDA) system. The EDA software supports the real-time interpretation of Multiple Frequency-Shift Keying tones provided by the spacecraft. The objective of this software is to provide communication of status between the spacecraft and the mission personnel on Earth during critical events when low rate telemetry is not possible. Although these communications cannot be used to affect the landing due to the length of time required at these distances, this information is important in the case of a mission failure. Mars Science Laboratory (MSL) will utilize the EDA software during EDL. Juno usage will include deep space maneuvers, Jupiter orbital insertion, and its period reduction maneuver. Results are presented from the Juno tones test. Simulated MSL and Juno signals were also generated and these results are analyzed.

Navarro, Robert↗

The unparalleled systems engineering of MSL’s backup entry, descent, and landing system : second chance

Second Chance (SECC) was a bare bones version of Mars Science Laboratory’s (MSL) Entry Descent & Landing (EDL) flight software that ran on Curiosity’s backup computer, which could have taken over swiftly in the event of a reset of Curiosity’s prime computer, in order to land her safely on Mars. Without SECC, a reset of Curiosity’s prime computer would have lead to catastrophic mission failure. Even though a reset of the prime computer never occurred, SECC had the important responsibility as EDL’s guardian angel, and this responsibility would not have seen such success without unparalleled systems engineering. This paper will focus on the systems engineering behind SECC: Covering a brief overview of SECC’s design, the intense schedule to use SECC as a backup system, the verification and validation of the system’s “Do No Harm” mandate, the system’s overall functional performance, and finally, its use on the fateful day of August 5th, 2012.

Reeves, Glenn↗

Mars Reconnaissance Orbiter navigation strategy for support of InSight lander's entry, descent, and landing sequence

The Mars Reconnaissance Orbiter (MRO) provided primary relay support for surface operations of the InSight mission immediately after it landed on Mars on November26,2018. To position MRO for relay support during InSight Entry, Descent and Landing (EDL), two propulsive maneuvers were performed in August and October 2018. This paper documents the maneuver strategy employed by the MRO Navigation Team to support the InSight EDL sequence.

Criddle, Kevin E.↗

Mars Reconnaissance Orbiter maneuver plan for Mars 2020 entry, descent, and landing support and beyond

The Mars Reconnaissance Orbiter (MRO) spacecraft continues to perform valuable science observations at Mars, provide telecommunication relay for surface assets, and characterize landing sites for future missions. MRO provided primary relay support for the InSight Mission during Entry, Descent, and Landing (EDL) on November26, 2018. This paper discusses the current maneuver plan to support Mars 2020 EDL and maintain MRO’s orbit for science operations through 2028.

Menon, Premkumar R.↗

Maven Orbital Trajectory Analysis: Design and Implementation of Lander Relay Support

NASA’s successful Mars Atmosphere and Volatile Evolution Mission (MAVEN), currently engaged in a survey of the Martian atmosphere and its evolution over time, has successfully completed a series of orbit changes, including a two-month aerobraking campaign, to satisfy additional mission roles. Launched on 18 November 2013, it entered Martian orbit on 22 September 2014. Having finished its primary one-year mission, the NASA Mars Program Office (MPO) started discussions with the MAVEN project on feasible options for extending the mission lifetime along with providing support for various Mars lander functions. MAVEN is the latest of the three active NASA Mars orbiters, with no others planned for the foreseeable future. Given that the landers need orbital relay support for years to come, and the MRO and Odyssey orbiters are aging, MAVEN’s role in providing critical orbital relay support has become increasingly important. After several years of studies, MPO directed the MAVEN project in 2018 to reduce its orbit size to provide better telecommunications relay support for Martian surface landers and to support Mars 2020 EDL under the constraint that MAVEN will have enough fuel to operate until 2030. As a part of this effort, the recent aerobraking campaign was one of several steps crucial to accomplishing this goal. This paper discusses the challenges of the entire mission design and its distillation into a concrete set of targeted objectives. With the successful orbit change, MAVEN will be able to provide support for the Mars 2020 relay activities from EDL through surface operations beyond 2030. This effort can serve as an excellent example for future missions having similar needs and requirements.

Jakosky, B. M.↗

Mars 2020 – Landing a 1-ton rover and helicopter in an ancient Martian Lake

The Mars 2020 spacecraft launched in July 2020 and landed the Perseverance rover and Ingenuity helicopter successfully in Jezero crater on Feb. 18, 2021. Mars 2020 is the first stage of the Mars Sample Return campaign that will bring back the first samples from another planet to Earth. The entry, descent, and landing (EDL) sequence of the Mars 2020 spacecraft largely leveraged the previous Mars Science Laboratory (MSL) mission from 2012. Mars 2020 retained most of the EDL sequences of MSL, including active maneuvering during hypersonic flight to accurately target the landing site and use of the Skycrane descent stage that slowly lowered the rover while hovering above the ground. But Mars 2020 also added Terrain Relative Navigation, a machine vision-based system that allowed the spacecraft to navigate using an on-board camera that mapped ground landmarks to an on-board map, allowing the spacecraft to safely land in locations that were too hazardous for any previous Martian mission. Come hear about the “Seven Minutes of Terror” and the eight years of effort that went into the engineering behind the spacecraft.

Soumyo Dutta↗

Assessment of the Mars 2020 Entry, Descent, and Landing Simulation

On February 18, 2021, the Mars 2020 Perseverance rover successfully landed inside Jezero Crater at 18.44463 deg North latitude and 77.45088 deg East longitude. At 1026 kg, Perseverance is the largest, most sophisticated rover ever delivered to another planet. This event marked the ninth successful landing and fifth rover to be delivered at Mars. The Program to Optimize Simulated Trajectories II (POST2) is a trajectory simulation tool maintained by the NASA Langley Research Center. POST2 was the prime EDL performance simulation for Mars 2020. This tool has significant heritage on the previous Pathfinder, MER, Phoenix, InSight, and MSL landings. This paper presents a few initial comparisons between EDL flight telemetry and POST2 simulation predictions. These comparisons are important in order to understand how each of the individual models performed, as well as the integrated simulation as a whole. This information is fed forward to future missions, which benefit from the knowing where additional resources or study are needed and where uncertainties may be reduced to enable improved performance.

David W Way↗

Assessment of the Mars 2020 Entry, Descent, and Landing Simulation

On February 18, 2021, the Mars 2020 Perseverance rover successfully landed inside Jezero Crater at 18.44463 deg North latitude and 77.45088 deg East longitude. At 1026 kg, Perseverance is the largest, most sophisticated rover ever delivered to another planet. This event marked the ninth successful landing and fifth rover to be delivered at Mars. The Program to Optimize Simulated Trajectories II (POST2) is a trajectory simulation tool maintained by the NASA Langley Research Center. POST2 was the prime EDL performance simulation for Mars 2020. This tool has significant heritage on the previous Pathfinder, MER, Phoenix, InSight, and MSL landings. This paper presents a few initial comparisons between EDL flight telemetry and POST2 simulation predictions. These comparisons are important in order to understand how each of the individual models performed, as well as the integrated simulation as a whole. This information is fed forward to future missions, which benefit from the knowing where additional resources or study are needed and where uncertainties may be reduced to enable improved performance.

David Way↗

Scale-Resolving Simulations of a Supersonic Retro-Propulsion Concept For Mars Entry, Descent, and Landing

Supersonic retro-propulsion (SRP) is a deceleration technology that could enable largerpayloads and potentially humans to be brought from space to the surface of Mars safely.Accurate and reliable CFD predictions are needed to help design future Mars entry, descent,and landing (EDL) vehicles due to the cost and limitations of wind tunnel tests. TypicalCFD approaches struggle at points along the Mars EDL trajectory with high enough altitude(low enough ambient pressure) that the SRP motor plumes are over-expanded. This workdemonstrates how high-order scale-resolving simulations on Cartesian AMR grids can provideaccurate and reliable time-averaged aerodynamic loads on the vehicle for this challengingflow regime. Greater than second order convergence in the time-averaged integrated axialforce𝐶𝐴is obtained across the three finest mesh resolutions simulated, and the estimateduncertainty is smaller than the unsteady standard deviation – demonstrating the accuracy andreliability of the method. Although costly, this approach can yield higher confidence in𝐶𝐴thanpreviously obtained in a reasonable turnaround time and is within reach for a few points in thetrajectory (i.e. Mach 2.4, 2.52, and 2.78). Further computational performance and numericalmethods improvements are needed to reduce the cost enough to bring this method into the EDLengineering design cycle.

S&M↗

Enabling International Data Relay at Mars

The most commonly used mode of communications be-tween Earth and a Mars surface mission is ultra-high fre-quency (UHF) radio relay via a Mars orbiter. There are four orbiters and two surface rovers operating at Mars and by October there should be five orbiters and three landers or rovers. There has been some collaboration between ESA’s Mars Express orbiter and NASA’s rovers, but 2016 is when Mars relay becomes fully international. In October, ESA will deliver the ExoMars Trace Gas Orbiter (TGO) and En-try, Descent, and Landing (EDL) Demonstrator Module (EDM) lander to Mars. The ExoMars program includes both ESA and ROSCOSMOS, with NASA participation (the Electra UHF transceiver on TGO). NASA orbiters will pro-vide relay for EDM and future ESA Mars landers and rov-ers. TGO will provide relay for NASA's current and future surface assets (as Mars Express will continue to do). Inter-national collaboration is enabled in several steps. At the in-struction of the space agencies, the Mars mission projects negotiate and write a “Service Agreement.” This describes at a high level how a new Mars orbiter would operate with its corresponding surface missions or how a new surface mis-sion would operate with its corresponding orbiters. It in-cludes the roles of the different projects, how the new mis-sion would communicate with existing or planned missions, the general flow of data and commands, and the capabilities or requirements of the new mission. After completing the Service Agreement, the projects write Interface Control Doc-uments (ICDs), each of which describes data and command flow in greater detail and quantitative aspects of the relay link and operations timeline between an orbiter and a cor-responding lander/rover. Interfaces and operations are test-ed before a new mission arrives at Mars. Once at Mars, a new orbiter performs some “practice” relay contacts with its partners. For a new lander (e.g. EDM), relay operations gen-erally begin before atmospheric entry at Mars, with record-ing of the UHF relay signal from the lander (including open-loop wide-bandwidth recording) as it enters and traverses Mars’s atmosphere and lands on its surface. After Mars EDL or orbit injection, each relay contact is negotiat-ed and scheduled using the Mars Relay Operations Service (MaROS). This paper describes the international approach to develop inter-agency agreements, inter-project interfaces, and specifics of how MaROS is used in actual relay opera-tions between international partners.

Winton, Alistair J.↗

Enabling Mars Radio Occultation by Smallsats

We introduce a Mars Radio Occultation (RO) mission concept leveraging on small satellite (smallsat) technologies that will enable measurements that address both Mars science and exploration priorities. The RO technique measures the Doppler shift of radio signals of a spacecraft occulting behind a planet’s limb that contains information about the planet’s atmospheric density, temperature, and pressure. We design a smallsat constellation and simulate “crosslink” RO observations between the smallsats to determine the expected accuracy and spatiotemporal coverage of Mars RO atmospheric profiles. Such measurements are key to spacecraft Entry, Descent, and Landing (EDL) and Ascent from the Surface (AST) of Mars. Today, there are limited number of Mars atmospheric profiles with high vertical resolution, especially measurements near the surface that are difficult to obtain from satellite-based passive instruments due to atmospheric absorption. We find that crosslink ROs between a constellation of six smallsats provide global and diurnal cycle coverage with dozens of occultations per day, providing temperature information from near-surface up to ~45 km with altitude-dependent accuracy that ranges between <0.5 K at lower altitude to <5 K in the middle-to-upper atmosphere. Ionospheric ROs reveal an expected electron density of ~5 – 10% at the peak ionospheric height between 100 and 140 km. We conclude that observations obtained from a smallsat constellation can augment existing observing platforms by reducing observational gaps and yield high resolution measurements required for safe spacecraft operations during EDL and AST.

Martinez, German↗

Earth Entry System Atmosphere Model Study

The Mars Sample Return Campaign has the ambitious goal of returning Mars samples back to Earth [1]. The Earth Entry System (EES), containing the samples, conducts entry, descent, and landing (EDL) on a direct Earth trajectory. During EDL, the EES traverses through many regions of Earth’s atmosphere before impacting the ground at Utah Test and Training Range (UTTR). This poster highlights preliminary results from a study that assessed the flight mechanics simulation sensitivity to atmosphere model settings and investigated the validity of current atmosphere models as compared to available atmospheric data measurements.

Rohan Deshmukh↗