Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Deployable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Two-Stage Wildlife Event Classification for Edge Deployment

Camera-based wildlife monitoring is often overwhelmed by non-target triggers and slowed by manual review or cloud-dependent inference, which can prevent timely intervention for high stakes human–wildlife conflicts. Our key contribution is a deployable, fully offline edge vision sensor that achieves near-real-time, highly accurate wildlife event classification by combining detector-based empty-image suppression with a lightweight classifier trained with a staged transfer-learning curriculum. Specifically, Stage 1 uses a pretrained You Only Look Once (YOLO)-family detector for permissive animal localization and empty-trigger suppression, and Stage 2 uses a lightweight EfficientNet-based binary classifier to confirm puma on detector crops and gate downstream actions. Our design is robust to low-quality nighttime monochrome imagery (motion blur, low contrast, illumination artifacts, and partial-body captures) and operates using commercially available components in connectivity-limited settings. In field deployments running since May 2025, end-to-end latency from camera trigger to action command is approximately 4 s. Ablation studies using a dataset of labeled wildlife images (pumas, not pumas) show that the two-stage approach substantially reduces false alarms in identifying pumas relative to a full-image classifier while maintaining high recall. On the held-out test set (N = 1434 events), the proposed two-stage cascade achieves precision 0.983, recall 0.975, F1 0.979, accuracy 0.986, and balanced accuracy 0.983, with only 8 false positives and 12 false negatives. The system can be easily adapted for other species, as demonstrated by rapid retraining of the second stage to classify ringtails. Downstream responses (e.g., notifications and optional audio/light outputs) provide flexible actuation capabilities that can be configured to support intervention.

58 GEOSCIENCES↗

Changes in Relative Fish Density Around a Deployed Tidal Turbine during on-Water Activities

Global interest in mitigating climate change effects is a driver for the development of renewable energy sources. In-stream tidal power, a type of marine hydrokinetic (MHK) energy uses tidal currents to generate electricity and is one example of developing a renewable energy industry. Effects and impacts on fishes in areas of tidal power development are a consideration, and presently there are many unanswered questions in this field of research. Knowledge of how fish use these areas before and after device installation is essential to informing regulators for decision-making. We attempted a Before-After-Control-Impact (BACI) study design to compare an index of fish density near and away from an MHK tidal energy device deployed in Cobscook Bay, Maine. The index was mean volume backscattering strength (Sv) obtained from 24-hour stationary, down-looking hydroacoustic surveys. Data were collected several times per year at an “impact” site within 50–75 m of a device and at a “control” site approximately 1.6 km away, both before and after turbine installation in August 2012. Fish density was lowest in March surveys and highest in May surveys at both sites. One of four comparisons (August 2011/before vs. 2012/after) indicated an interaction of fish density with turbine installation. Operational status of the installed turbine and on-water activity disturbances (e.g., industry vessel and diving activities) varied at the impact site and possibly influenced results. Lower fish densities were observed during installation and maintenance periods than during normal device operation. The effects of construction activities must be separated from the effects of a deployed device to effectively implement a statistically rigorous assessment that could separate the effects of these different activities. This parsimonious approach and results were used for permit licensing by federal and state regulatory bodies at this site and others and can be used to consider regulatory adjustments during different phases of device operation and maintenance.

Staines, Garrett (ORCID:0000000182829661)↗

The Astronomy Commons Platform: A Deployable Cloud-based Analysis Platform for Astronomy

Abstract We present a scalable, cloud-based science platform solution designed to enable next-to-the-data analyses of terabyte-scale astronomical tabular data sets. The presented platform is built on Amazon Web Services (over Kubernetes and S3 abstraction layers), utilizes Apache Spark and the Astronomy eXtensions for Spark for parallel data analysis and manipulation, and provides the familiar JupyterHub web-accessible front end for user access. We outline the architecture of the analysis platform, provide implementation details and rationale for (and against) technology choices, verify scalability through strong and weak scaling tests, and demonstrate usability through an example science analysis of data from the Zwicky Transient Facility’s 1Bn+ light-curve catalog. Furthermore, we show how this system enables an end user to iteratively build analyses (in Python) that transparently scale processing with no need for end-user interaction. The system is designed to be deployable by astronomers with moderate cloud engineering knowledge, or (ideally) IT groups. Over the past 3 yr, it has been utilized to build science platforms for the DiRAC Institute, the ZTF partnership, the LSST Solar System Science Collaboration, and the LSST Interdisciplinary Network for Collaboration and Computing, as well as for numerous short-term events (with over 100 simultaneous users). In a live demo instance, the deployment scripts, source code, and cost calculators are accessible. 4 4 http://hub.astronomycommons.org/

79 ASTRONOMY AND ASTROPHYSICS↗

Quantifying the Effect of Fast Charger Deployments on Electric Vehicle Utility and Travel Patterns via Advanced Simulation: Preprint

The disparate characteristics between conventional (CVs) and battery electric vehicles (BEVs) in terms of driving range, refill/recharge time, and availability of refuel/recharge infrastructure inherently limit the relative utility of BEVs when benchmarked against traditional driver travel patterns. However, given a high penetration of high-power public charging combined with driver tolerance for rerouting travel to facilitate charging on long-distance trips, the difference in utility between CVs and BEVs could be marginalized. We quantify the relationships between BEV utility, the deployment of fast chargers, and driver tolerance for rerouting travel and extending travel durations by simulating BEVs operated over real-world travel patterns using the National Renewable Energy Laboratory's Battery Lifetime Analysis and Simulation Tool for Vehicles (BLAST-V). With support from the U.S. Department of Energy's Vehicle Technologies Office, BLAST-V has been developed to include algorithms for estimating the available range of BEVs prior to the start of trips, for rerouting baseline travel to utilize public charging infrastructure when necessary, and for making driver travel decisions for those trips in the presence of available public charging infrastructure, all while conducting advanced vehicle simulations that account for battery electrical, thermal, and degradation response. Results from BLAST-V simulations on vehicle utility, frequency of inserted stops, duration of charging events, and additional time and distance necessary for rerouting travel are presented to illustrate how BEV utility and travel patterns can be affected by various fast charge deployments.

25 ENERGY STORAGE↗

Developing and Deploying Universal Diagnostic Platforms for One-Health Biosurveillance

ObjectiveOur goal is to develop deployable strategies for infectious disease diagnosis at the point-of-care that are applicable to multiple hosts of infection - conforming to the global One Health Strategy for diagnostics. We aim to develop methods that do not require prior knowledge of the pathogen in question, and can facilitate rapid and effective decision-making and situational awareness.IntroductionThere is an urgent need for diagnostic strategies for infections which are host-independent, so as to effectively track zoonotic spread, monitor animal carriers of pathogens, and evaluate transmission dynamics. Infection of a host - pathogen or human- by an animal results in recognition by the immune response, which consequently causes release of inflammatory mediators. Many scientists have explored the use of cytokines as diagnostic indicators of disease, but the conserved nature of the immune response in humans and animals results in cross-reactivity among many pathogens, making evaluation of the results difficult, especially in high disease burden populations. Measuring the pathogen-specific signature, however, is advantageous - as it offers discrete identification of active infection, and discrimination from exposure. It also offers a universal strategy that can be applied to human and animal hosts of infection - allowing for One Health Biosurveillance. Achieving this, however, requires the development of a) tailored strategies for the measurement of biochemically disparate pathogen signatures in clinical samples and b) ultra-sensitive detection of such signatures in the host. The sensor team at Los Alamos National Laboratory is working on both of these aspects, and the development of One Health Diagnostic platforms, the focus of the work presented here.MethodsMany of the biomarkers secreted by bacterial pathogens and recognized by innate immune receptors elicit host cytokine responses that are amphiphilic (largely glycolipids, lipoproteins or lipoglycans). Based on such, our team has developed tailored methods – membrane insertion and lipoprotein capture for the capture and detection of these greasy and stealthy molecules in infected blood. Sensitivity and specificity, assay optimization, alinearity associated with lipidic molecules and assay parameter development for biomarkers associated with bacterial pathogens will be presented. Considerations for clinical sampling for amphiphile detection in blood, and clinical study design will be demonstrated. Our team has developed an ultra-sensitive biosensor for detection of biomarkers in complex matrices based on the evanescent field properties of single mode planar optical waveguides. Detection of amphiphilic biomarkers in clinical samples, using the waveguide-based biosensor and tailored methods for the detection of such molecules has allowed for the diagnosis of infection in both human and animals hosts. Herein, we present two examples of the same; 1) diagnosis of tuberculosis in humans, cattle and badgers using pathogen-based diagnostic strategies; and 2) detection of Gram-negative Lipopolysacharides in beef and in patients with Salmonella-induced sepsis.ResultsWe have developed tailored ultra-sensitive waveguide-biosensor assays for the detection of Lipoarabinomannan (and other biomarkers) from Mycobacteria and demonstrated feasibility in blinded clinical studies in humans and cattle, demonstrating one -health compatibility.We have also demonstrated detection of lipopolysacharides from eight different serotypes of Shiga-toxin carrying E. coli in beef, and Salmonella Typhimurium in pediatric patients using the same approach.ConclusionsWe have demonstrated clinical feasibility of a One Health Strategy for point-of-care diagnostics of bacterial infections in blood for tuberculosis and Gram-negative pathogens in clinical samples. The results will be demonstrated with several discussion points on the consideration of unconventional biochemistry of pathogens for diagnostics, factors influencing point-of-care deployment and integration of diagnostic platforms for biosurveillance. One Health Considerations and challenges therein will also merit discussion.ReferencesSakamuri, R; et al. Accurate Tracking of Bovine Tuberculosis Biomarkers in Infected Cattle using a Novel Biomarker Capture Strategy, Analytical Sciences, 33(4): 457-460, 2017.Noormohammed A et al. Detection of Salmonella LPS in Patient blood by Lipoprotein Capture. Proc. SPIE 10072, Optical Diagnostics and Sensing XVII: Toward Point-of-Care Diagnostics, 100720A , 2017. doi:10.1117/12.2253506Stromberg L et al. Membrane Insertion for the Detection of Lipopolysaccharides: Exploring the Dynamics of Amphiphile-in-Lipid Assays, PloS One, April 2016.Sakamuri RM et al. Association of lipoarabinomannan with high density lipoprotein in blood: implications for diagnostics.Tuberculosis (Edinb). 2013 May;93(3):301-7. doi: 10.1016/j.tube.2013.02.015. Epub 2013 Mar 16Mukundan H et al. Understanding the interaction of Lipoarabinomannan with membrane mimetic architectures. Tuberculosis, 92(1) 32-47, 2012.Mukundan H et al., Waveguide-based Sensors for Pathogen Detection, Invited Review, Sensors, 9(7), 5783-5809.

Mukundan, Harshini↗

Deep-Learning-Based Multi-Timescale Load Forecasting in Buildings: Opportunities and Challenges from Research to Deployment

Electricity load forecasting for buildings and campuses is becoming increasingly important as the penetration of distributed energy resources (DERs) grows. Efficient operation and dispatch of DERs require reasonably accurate predictions of future energy consumption in order to conduct near-real-time optimized dispatch of on-site generation and storage assets. Electric utilities have traditionally performed load forecasting for load pockets spanning large geographic areas, and therefore, forecasting has not been a common practice by buildings and campus operators. Given the growing trends of research and prototyping in the grid-interactive efficient buildings domain, characteristics beyond simple algorithm forecast accuracy are important in determining the algorithm's true utility for smart buildings. Other characteristics include the overall design of the deployed architecture and the operational efficiency of the forecasting system. In this work, we present a deep-learning-based load forecasting system that predicts the building load at 1-hour intervals for 18 hours in the future. We also discuss challenges associated with the real-time deployment of such systems as well as the research opportunities presented by a fully functional forecasting system that has been developed within the National Renewable Energy Laboratory's Intelligent Campus program.

building load forecasting↗

Advancing the HERO WEC Through Integrated Modeling, Testing, and Field Deployments

The Hydraulic and Electric Reverse Osmosis Wave Energy Converter (HERO WEC) was developed by the National Laboratory of the Rockies as a modular platform for advancing wave-powered desalination technologies. Designed to operate in either a hydraulic or electric configuration, the system enables direct comparison of mechanical-to-water and electrical-to-water conversion pathways using a single hardware architecture. Deployments in 2022 and 2024 at the Jennette's Pier test site in North Carolina demonstrated freshwater production between 60 and 300 gallons per day, including successful operation in wave heights as low as 0.25 m. A structured evaluation approach combining numerical modeling of hydrodynamic and power take-off response, controlled laboratory testing, and in-ocean field deployments has been used to characterize and refine system performance. Specifically, insights from these efforts are now informing the second-generation HERO WEC (V2) to increase robustness and overall survivability. Changes from the original prototype include improved drivetrain components, refined geometry, enhanced control systems, and design. The HERO WEC platform continues to serve as an open-access research asset supporting broader marine energy and desalination development.

16 TIDAL AND WAVE POWER↗

Optimal Design Approaches for Cost-Effective Manufacturing and Deployment of Chemical Process Families with Economies of Numbers

Developing methods for rapid, large-scale deployment of carbon capture systems is critical for meeting climate change goals. Optimization-based decisions can be employed at the design and manufacturing phases to minimize costs of deployment and operation. Manufacturing standardization results in significant cost savings due to economies of numbers. Building off previous work, we present a process family design approach to design a set of carbon capture systems while explicitly including economies of numbers savings within the formulation. Our formulation optimizes both the number and characteristics of the common components in the platform and simultaneously designs the resulting set of carbon capture systems. Savings from economies of numbers are explicitly included in the formulation to determine the number of components in the platform. We show and discuss the savings we gain from economies of numbers.

Stinchfield, Georgia↗

An Integrated RFID and Barcode Tagged Item Inventory System for Deployment at New Brunswick Laboratory

New Brunswick Laboratory (NBL) has a numerous inventory containing thousands of plutonium and uranium certified reference materials. The current manual inventory process is well established but is a lengthy process which requires significant oversight and double checking to ensure correctness. Oak Ridge National Laboratory has worked with NBL to develop and deploy a new inventory system which utilizes handheld computers with barcode scanners and radio frequency identification (RFID) readers termed the Tagged Item Inventory System (TIIS). Certified reference materials are identified by labels which incorporate RFID tags and barcodes. The label printing process and RFID tag association process are integrated into the main desktop software application. Software on the handheld computers syncs with software on designated desktop machines and the NBL inventory database to provide a seamless inventory process. This process includes: 1) identifying items to be inventoried, 2) downloading the current inventory information to the handheld computer, 3) using the handheld to read item and location labels, and 4) syncing the handheld computer with a designated desktop machine to analyze the results, print reports, etc. The security of this inventory software has been a major concern. Designated roles linked to authenticated logins are used to control access to the desktop software while password protection and badge verification are used to control access to the handheld computers. The overall system design and deployment at NBL will be presented. The performance of the system will also be discussed with respect to a small piece of the overall inventory. Future work includes performing a full inventory at NBL with the Tagged Item Inventory System and comparing performance, cost, and radiation exposures to the current manual inventory process.

barcode↗

Evaluating Solar Resource Data Obtained from Multiple Radiometers Deployed at the National Renewable Energy Laboratory: Preprint

Solar radiation resource measurements from radiometers are used to predict and evaluate the performance of photovoltaic and concentrating solar power systems, validate satellite-based models for estimating solar resources, and advance research in solar forecasting and climate change. This study analyzes the performance of various commercially available radiometers used for measuring global horizontal irradiances (GHI) and direct normal irradiances (DNI). These include pyranometers, pyrheliometers, rotating shadowband irradiometers, and a pyranometer with a shading ring deployed at the National Renewable Energy Laboratory's Solar Radiation Research Laboratory (SRRL). The radiometers in this study were deployed for one year (from April 1, 2011, through March 31, 2012) and compared to measurements from radiometers with the lowest values of estimated measurement uncertainties for producing reference GHI and DNI.

14 SOLAR ENERGY↗

Immediate Deployment of Waste Energy Technologies at Multiple Sites

Verso Paper Corp. implemented a portfolio of 13 commercially available proven industrial technologies each exceeding 30% minimum threshold efficiency and at least 25% efficiency increase. These sub-projects are a direct result of a grant received from the Department of Energy (DOE) through its FOA 0000044 (Deployment of Combined Heat and Power (CHP) Systems, District Energy Systems, Waste Energy Recovery Systems, and Efficient Industrial Equipment), which was funded by the American Recovery Act. These were installed at 3 sites in 2 states and are helping to reduce Verso costs, making the facilities more competitive. This created approximately 100 construction jobs (FTE’s) and reduced impacted Verso facilities’ expense budgets. These sub-projects were deployed at Verso paper mills located in Jay, Maine, Bucksport, Maine, and Sartell, Minnesota. The paper mills are the economic engines of the rural communities in which these mills are located. Reinvestment in waste energy recovery capital improvements is providing a stimulus to help maintain domestic jobs and to competitively position the US pulp and paper industry with rising energy costs. Energy efficiency improvements are also providing a positive environmental impact by reducing greenhouse gas emissions, the quantity of wastewater treated and discharged, and fossil fuel demand. As a result of these projects, when fully operating, Verso realized a total of approximately 1.5 TBtu/Year reduction in overall energy consumption, which is 119% of the project objectives. Note that three paper machines have since been permanently curtailed. However even with these shutdowns, the company still met its energy objectives. Note also that the Sartell mill’s paper machine is down due to a recent fire which damaged the mill’s electrical infrastructure (the company has not decided on the mill’s future).

distributed energy, combined heat and power, CHP, ↗

Impact of Federal Tax Policy on Utility-Scale Solar Deployment Given Financing Interactions

In this study, the authors conducted a literature review of approaches and assumptions used by other modeling teams and consultants with respect to solar project financing; developed and incorporated an ability to model the likely financing shift away from more expensive sources of capital and toward cheaper sources as the investment tax credit declines in the ReEDS model; and used the 'before and after' versions of the ReEDS model to isolate and analyze the deployment impact of the financing shift under a range of conditions. Using ReEDS scenarios with this improved capability, we find that this 'financing' shift would soften the blow of the ITC reversion; however, the overall impacts of such a shift in capital structure are estimated to be small and near-term utility-scale PV deployment is found to be much more sensitive to other factors that might drive down utility-scale PV prices.

14 SOLAR ENERGY↗

Seismic SMHD -- Rotational Sensor Development and Deployment

The U.S. Department of Energy (DOE) and Applied Technology Associates (ATA) are funding development and deployment of a new generation of rotational sensors for validation of rotational seismic applications. The sensors employ Magnetohydrodynamic (MHD) principles with broadband response, high dynamic range, low noise floor, proven ruggedness, and high repeatability. This paper presents current status of sensor development and deployment opportunities.

58 GEOSCIENCES↗

Special Testing for Modules Deployed in Hot Use Environments - Are We Doing This in a Low-Cost Way?

The proposed new IEC standard will address the test temperature requirements in IEC 61215 (module design), IEC 61730 (module safety), IEC 62790 (junction box safety) and IEC 62852 (connectors), and will provide guidelines to modify temperature limits in four existing standards to better describe module performance in hotter climates. This workshop includes four presentations: Special Testing for Modules Deployed in Hot Use Environments - Are We Doing This in a Low-Cost Way?, Experimental Evidence, Why the highest temperatures are the most stressful to PV modules during thermal cycling, and Safety Aspects for Modules Deployed in Hot Use Environments.

14 SOLAR ENERGY↗

An Approach for Assessing Development and Deployment Risks in the DOE Fuel Cycle Options Evaluation and Screening Study

Abstract One of the key objectives of the U.S. Department of Energy (DOE) Nuclear Energy R&D Roadmap is the development of sustainable nuclear fuel cycles that can improve natural resource utilization and provide solutions to the management of nuclear wastes. Recently, an evaluation and screening (E&S) of fuel cycle systems has been conducted to identify those options that provide the best opportunities for obtaining such improvements and also to identify the required research and development activities that can support the development of advanced fuel cycle options. In order to evaluate and screen the E&S study included nine criteria including Development and Deployment Risk (D&DR). More specifically, this criterion was represented by the following metrics: Development time, development cost, deployment cost from prototypic validation to first-of-a-kind commercial, compatibility with the existing infrastructure, existence of regulations for the fuel cycle and familiarity with licensing, and existence of market incentives and/or barriers to commercial implementation of fuel cycle processes. Given the comprehensive nature of the study, a systematic approach was needed to determine metric data for the D&DR criterion, and is presented here. As would be expected, the Evaluation Group representing the once-through use of uranium in thermal reactors is always the highest ranked fuel cycle Evaluation Group for this D&DR criterion. Evaluation Groups that consist of once-through fuel cycles that use existing reactor types are consistently ranked very high. The highest ranked limited and continuous recycle fuel cycle Evaluation Groups are those that recycle Pu in thermal reactors. The lowest ranked fuel cycles are predominately continuous recycle single stage and multi-stage fuel cycles that involve TRU and/or U-233 recycle.

Gehin, Jess C↗

Quantifying and Understanding Effects from Wildlife, Radar, and Public Engagement on Future Wind Deployment

This presentation provides an overview of findings from a report published in 2016 by researchers at the National Renewable Energy Laboratory, An Initial Evaluation of Siting Considerations on Current and Future Wind Deployment. The presentation covers the background for research, the Energy Department's Wind Vision, research methods, siting considerations, the wind project deployment process, and costs associated with siting considerations.

17 WIND ENERGY↗

Portable Flux Tower Deployments Field Campaign Report

In May of 2015, a portable eddy covariance flux tower was installed by David Billesbach at the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility’s Southern Great Plains (SGP) observatory E-32 extended facility west of Medford, Oklahoma. The goal of this deployment was to provide data sets that could be used to test land-atmosphere models and surface forcing from the SGP region. This site was chosen as being underrepresented in current data inventories. In January of 2016, a second portable flux system was installed (by Billesbach and Sebastien Biraud) in a field at the southeast corner of the intersection of Oklahoma highways 11 and 74 (also near Medford and designated as site 74). This site was chosen because it was to be planted in grain sorghum (milo) which is also an underrepresented crop. A secondary goal for this deployment was to refine the operational parameters of the newly rebuilt portable eddy correlation flux systems (ECOR), which incorporate several new sensors. These new measurements were designed to accommodate more advanced modeling and integration with remote-sensing products such as normalized difference vegetation index (NDVI), photochemical reflectance index (PRI), and diffuse solar radiation. Another secondary goal was to assess how well surface energy components—sensible heat flux (H) and latent heat flux (LE)—measured by ECOR and energy balance Bowen ratio (EBBR) instruments could be compared. Operations were terminated at the E-32 site in June of 2017 and Billesbach removed the equipment from the site. Operations at site 74 were terminated in October of 2017 and Billesbach (with assistance from SGP-Central Facility personnel) again removed the equipment from the field. The most notable event at the E-32 site was the retrenching of site power. This operation opened a wide gap in the normally grass-covered footprint of our optical sensors. We are still evaluating the effects that the bare soil had on our NDVI and PRI data. At site 74, we learned after germination that soy beans instead of grain sorghum had been planted for the second (2017) growing season.

energy balance Bowen ratio station, eddy correlati↗

ADMS Test Bed: Defining a Use Case for Data Improvement for ADMS Deployment: Preprint

Advanced distribution management systems (ADMS) provide a suite of tools for meeting the needs of a modern grid - higher reliability and power quality, improved resiliency and security, lower costs and enhanced customer participation. Data quality has two-fold impact on ADMS adoption: 1. Data quality improvement may constitute up to 25% of ADMS deployment costs. 2. The accuracy of data and models used by the ADMS greatly affect the utility's ability to meet the operational objectives. Thus, quantifying the data quality requirements and its impact on performance is critical to reducing the overall cost of deployment, enabling wider adoption and ensuring that the ADMS performs as specified. The paper offers the motivation, methodology and evaluation strategy for filling this critical gap.

24 POWER TRANSMISSION AND DISTRIBUTION↗