Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Availability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Technical and Licensing Considerations for Micro-Reactors

The U.S. Nuclear Regulatory Commission (NRC) has interacted with vendors pursuing the commercialization of micro-reactors (i.e., reactors capable of producing about 1 MW(th) to 20 MW(th) of energy from nuclear fission). It is envisioned that micro-reactors could be assembled and fueled in a factory and shipped to a site. Many of the sites are expected to be remote locations requiring off-grid power or in some cases military bases. The objective of this effort is to explore the technical issues and the approach required to reach a finding of "reasonable assurance of public health and safety" for this new and different class of reactors. The analysis performed here leverages available micro-reactor design and testing data available from national laboratory experience as well as commercial design information to explore technical issues. Some factors considered include source term, accidents that would need to be analyzed, and the extent of the probabilistic risk assessment (PRA). The technical evaluation was performed within the framework of the Licensing Modernization Project (LMP) to identify licensing basis events, classification of structures, systems and components, and defense-in-depth needed to provide regulatory certainty. With this framework and technical evaluation in mind, the scope and content of a micro-reactor licensing application is discussed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

High Strain-Rate Strength Experiments on Molybdenum for Constitutive Model Parameter Selection

The constitutive model parameters for molybdenum obtained from the Plansee supplier have been constrained via Strength-Stabilized Rayleigh-Taylor experiments performed at the Los Alamos Neutron Science Center. Previous Hopkinson-bar measurements have produced a degenerate family of constitutive model parameters proven in the low strain rate regime. The experiments presented here provide a constraint at strain rates from 10 4 –10 6 s -1 which is used to select a preferred set of parameters for high strain-rate applications. Further analysis is warranted including determining a global fit in parameter space using all available high and low strain-rate data available.

36 MATERIALS SCIENCE↗

U.S. Voluntary Green Power Market Data 2019

This data book provides certain data behind figures and tables found in the NREL presentation, Status and Trends in the U.S. Voluntary Green Power Market (2019 Data). These data reflect estimates based on the best available data.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

NREL Green Power Data 2020

This data book provides certain data behind figures and tables found in the NREL presentation "Status and Trends in the Voluntary Market (2020 Data)." These data reflect estimates based on the best available data.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Status and Trends in the U.S. Voluntary Green Power Market (2021 Data)

This data book provides certain data behind figures and tables found in the NREL presentation "Status and Trends in the Voluntary Market (2021 Data)." These data reflect estimates based on the best available data. Excluded Data This data book excludes data for certain figures using confidential survey data or purchased data for which NREL does not own the rights. In particular, renewable energy certificate (REC) price data are not included in this data book Rounding: Some estimates may be slightly inconsistent across tabs due to estimate rounding Citation for the data: E. O'Shaughnessy and J. Heeter. 2022. Status and Trends in the Voluntary Market. Golden, CO: NREL. For more information: contact Jenny Heeter (jenny.heeter@nrel.gov). For more information on voluntary green power markets see NREL's resources at https://www.nrel.gov/analysis/green-power.html. Acronyms CCA Community choice aggregation MWh Megawatt hour PPA Power purchase agreement RECs Renewable energy certificate

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Materials data handbooks on stainless steels

Two handbooks which summarize latest available data have been published. Two types of stainless steels, alloy A-286 and Type 301, are described. Each handbook is divided into twelve chapters. Scope of information presented includes physical- and mechanical-property data at cryogenic, ambient, and elevated temperatures.

Muraca, R. F.↗

The aviation safety reporting system

The aviation safety reporting system, an accident reporting system, is presented. The system identifies deficiencies and discrepancies and the data it provides are used for long term identification of problems. Data for planning and policy making are provided. The system offers training in safety education to pilots. Data and information are drawn from the available data bases.

Reynard, W. D.↗

Application of nonlinear least squares methods to the analysis of solar spectra

A fast method of retrieving vertical temperature profiles in the atmosphere and of determining the paths of the rays producing the ATMOS occultation spectra has been developed. The results from one set of occultation data appear to be consistent with other available data. A study of sources of error, a search for other suitable features for measurement in the spectra, and modification of the program to obtain mixing ratio profiles have been initiated.

Shaw, J. H.↗

Estimation of aerodynamic parameters from flight data of a high incidence research model

A procedure for the determination of an aerodynamic model structure and aerodynamic parameters is applied to flight data from a high-incidence research model (HIRM) within an angle of attack range of 18 to 40 degrees. The HIRM is a three-surface unpowered model with a swept wing, an all-moving canard and stabilator, and a vertical tail with rudder. The motion of the HIRM was excited first by its release from the helicopter and then by the activation of control surfaces. This paper briefly describes the model, flight and wind tunnel data available, equations of motion and techniques for data analysis. The results presented contain an example of a measured data compatibility and the variation of some important stability derivatives with the angle of attack and canard setting. The derivatives were obtained from various maneuvers and subsets of joined data from several maneuvers by using a stepwise-regression technique. These derivatives agreed, in general, with the results of wind-tunnel measurements. The resulting lateral aerodynamic model equations could predict the motion of the HIRM reasonably well.

Klein, V.↗

Overview of the Astrophysics Data System

The Astrophysics Division of NASA has built a geographically- and logically-distributed heterogeneous information system for the dissemination and coordinated multispectral analysis of data from astrophysics missions. The Astrophysics Data System (ADS) is a truly distributed system in which the data and the required processing are physically distributed. To accommodate the anticipated growth and changes in both requirements and technology, the ADS employs a server/client architecture which allows services and data to be added or replaced without having to change the basic architecture or interfaces. Current datasets accessible through the system include all the tabular astronomical data available at each of six existing astrophysics data centers. Additional data nodes, at both NASA data centers and academic institutions, will be added shortly. The future evolution of the system will be driven in large part by user services mounted both by the ADS project itself and by members of the astrophysics community.

Good, John C.↗

Overview of the Astrophysics Data System

The Astrophysics Division of NASA has built a geographically and logically distributed heterogeneous information system for the dissemination and coordinated multispectral analysis of data from astrophysics missions. The Astrophysics Data System (ADS) is a truly distributed system in which the data and the required processing are physically distributed. To accommodate the anticipated growth and changes in both requirements and technology, the ADS employs a server/client architecture which allows services and data to be added or replaced without having to change the basic architecture or interfaces. Current datasets accessible through the system include all the tabular astronomical data available at each of six existing astrophysics data centers. Additional data nodes, at both NASA data centers and academic institutions, will be added shortly. The future evolution of the system will be driven in large part by user services mounted both by the ADS project itself and by members of the astrophysics community.

Good, John C.↗

Preliminary design of an intermittent smoke flow visualization system

A prototype intermittent smoke flow visualization system for studying the flowfield of an aircraft in flight has been constructed and demonstrated. It provides discrete pulses of dense white smoke suitable for video imaging to determine the unsteady vortex core trajectory of fluid elements in a high angle-of-attack flowfield. Two methods of pulsing the smoke were initially investigated: (1) periodically diverting the smoke between two exit ports and (2) completely blocking the smoke flow for short times. System dynamics have been modeled mathematically, data have been collected in a wind tunnel with blockage times up to 80 milliseconds, and the prototype is currently being flown on a general aviation airplane to collect three-dimensional video data. Three different plenum chamber sizes are available. Data collected so far are consistent and repeatable, though care must be taken to provide adequate contrast levels for accurate video resolution. Camera frame rates of at least 180 frames/second and wide angle lenses for the video cameras are needed to acquire meaningful vortex core velocities and accelerations for the general aviation test aircraft installation.

Ward, D. T.↗

Comparison of Kalman filter estimates of zenith atmospheric path delays using the global positioning system and very long baseline interferometry

Kalman filter estimates of zenith nondispersive atmospheric path delays at Westford, Massachusetts, Fort Davis, Texas, and Mojave, California, were obtained from independent analyses of data collected during January and February 1988 using the GPS and VLBI. The apparent accuracy of the path delays is inferred by examining the estimates and covariances from both sets of data. The ability of the geodetic data to resolve zenith path delay fluctuations is determined by comparing further the GPS Kalman filter estimates with corresponding wet path delays derived from water vapor radiometric data available at Mojave over two 8-hour data spans within the comparison period. GPS and VLBI zenith path delay estimates agree well within one standard deviation formal uncertainties (from 10-20 mm for GPS and 3-15 mm for VLBI) in four out of the five possible comparisons, with maximum differences of 5 and 21 mm over 8- to 12-hour data spans.

Tralli, David M.↗

A summary and analysis of the low-speed longitudinal characteristics of swept wings at high Reynolds number

An analysis of the longitudinal characteristics of swept wings which is based on available large-scale low-speed data and supplemented with low-scale data when feasible is presented. The emphasis has been placed on the differentiation of the characteristics by a differentiation between the basic flow phenomenon involved. Insofar as possible all large-scale data available as of August 15, 1951 have been summarized in tabular form for ready reference.

Furlong, G Chester↗

Developing Information Power Grid Based Algorithms and Software

This was an exploratory study to enhance our understanding of problems involved in developing large scale applications in a heterogeneous distributed environment. It is likely that the large scale applications of the future will be built by coupling specialized computational modules together. For example, efforts now exist to couple ocean and atmospheric prediction codes to simulate a more complete climate system. These two applications differ in many respects. They have different grids, the data is in different unit systems and the algorithms for inte,-rating in time are different. In addition the code for each application is likely to have been developed on different architectures and tend to have poor performance when run on an architecture for which the code was not designed, if it runs at all. Architectural differences may also induce differences in data representation which effect precision and convergence criteria as well as data transfer issues. In order to couple such dissimilar codes some form of translation must be present. This translation should be able to handle interpolation from one grid to another as well as construction of the correct data field in the correct units from available data. Even if a code is to be developed from scratch, a modular approach will likely be followed in that standard scientific packages will be used to do the more mundane tasks such as linear algebra or Fourier transform operations. This approach allows the developers to concentrate on their science rather than becoming experts in linear algebra or signal processing. Problems associated with this development approach include difficulties associated with data extraction and translation from one module to another, module performance on different nodal architectures, and others. In addition to these data and software issues there exists operational issues such as platform stability and resource management.

Dongarra, Jack↗

An investigation into the potential for wind turbines to cause barotrauma in bats

The high rates of bat mortality caused by operating wind turbines is a concern for wind energy and wildlife stakeholders. One theory that explains the mortality is that bats are not only killed by impact trauma, but also by barotrauma that results from exposure to the pressure variations caused by rotating turbine blades. To date, no published research has calculated the pressure changes that bats may be exposed to when flying near wind turbines and then used these data to estimate the likelihood that turbines cause barotrauma in bats. To address this shortcoming, we performed computational fluid dynamics simulations of a wind turbine and analytical calculations of blade-tip vortices to estimate the characteristics of the sudden pressure changes bats may experience when flying near a utility-scale wind turbine. Because there are no data available that characterize the pressure changes that cause barotrauma in bats, we compared our results to changes in pressure levels that cause barotrauma and mortality in other mammals of similar size. This comparison shows that the magnitude of the low-pressures bats experience when flying near wind turbines is approximately 8 times smaller than the pressure that causes mortality in rats, the smallest mammal for which data are available. The magnitude of the high-pressures that bats may experience are approximately 80 times smaller than the exposure level that causes 50% mortality in mice, which have a body mass similar to several bat species that are killed by wind turbines. Further, our results show that for a bat to experience the largest possible magnitude of low- and high-pressures, they must take very specific and improbable flight paths that skim the surface of the blades. Even a small change in the flight path results in the bat being hit by the blade or experiencing a much smaller pressure change. Accordingly, if bats have a physiological response to rapid low- and high-pressure exposure that is similar to other mammals, we conclude that it is unlikely that barotrauma is responsible for a significant number of turbine-related bat fatalities, and that impact trauma is the likely cause of the majority of wind-turbine-related bat fatalities.

17 WIND ENERGY↗

Ab initio calculation of muon capture on 24 Mg

In this work we study ordinary muon capture (OMC) on 24 Mg from a first-principles perspective. Starting from a particular two- and three-nucleon interaction derived from chiral effective field theory, we use the valence-space in-medium similarity renormalization group (VS-IMSRG) framework to construct effective Hamiltonians and muon-capture operators, which nonperturbatively account for many-body physics outside the valence space. Here, the obtained nuclear matrix elements are compared against those from the phenomenological shell model. The impact of including the correlations from the nuclear shell model (NSM) as well as including the induced twobody part is studied in detail. Furthermore, the effects of realistic bound-muon wave function on the operators is studied. Finally, predictions for capture rates to the lowest excited states in 24 Na are given and compared with available data. It is found that the spectroscopic properties of 24 Mg and its OMC daughter 24 Na are fairly well described by both the NSM and VS-IMSRG, and that the effect of the hadronic two-body currents significantly reduces the OMC rates. Both models have some difficulties in matching the measured OMC rates, especially for the 2 + final states. This calls for further studies in other light nuclei with available OMC data.

20 ≤ A ≤ 38↗

ICESat-2 Mission: Status, Outlook, and Contributions to Polar Science

The Ice, Cloud and land Elevation Satellite-2 (ICESat-2) mission carries the Advanced Topographic Laser Altimeter System (ATLAS) lidar to measure the changing height of Earth surface. After more than 3 years of science data collection, ATLAS has emitted well over a trillion laser pulses and continues to operate nominally. The ICESat-2 data products were initially released in May 2019, and have been used in over 150 peer-reviewed publications to date. Recent community white papers have noted the importance of ice elevation measurements for the coming decades, and as CryoSat-2 has entered it’s second decade and future missions are uncertain, ICESat-2 will be a critical part of the Earth System Observatory for the 2020s. In the polar regions, ICESat-2 has enabled year-round sea ice freeboard measurements as well as ice sheet elevation changes on seasonal, annual, and decadal time scales when combined with other missions. These data enable measurement of change at fine spatial and temporal scales to help understand or characterize the processes driving these observations. As of this presentation, Release 005 is the current version of the along-track data products, including surface-specific products for sea ice, land ice, ground and canopy height, ocean, and inland water heights. In addition, first versions of gridded data products for land ice, sea ice, and ocean are all available. Data spans the start of the mission (14 October 2018) through early 2022. The ICESat-2 project has also begun to produce and distribute QuickLook products with a nominal 3-day latency (as opposed to the ~45-day latency of the final data products). Initial versions of these QuickLook products have elevation accuracy of ~3 meters, and geolocation accuracy of ~50 meters. All products are available through the National Snow and Ice Data Center (nsidc.org). This presentation will summarize the current state and health of the observatory, current state of the ICESat-2 data products, data product quality assessment, and outlook for the future.

ICESat-2↗