Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DENSITY OF STATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

The influence of phonon softening on the superconducting critical temperature of Sn nanostructures

Abstract The increase in superconducting transition temperature (T C ) of Sn nanostructures in comparison to bulk, was studied. Changes in the phonon density of states (PDOS) of the weakly coupled superconductor Sn were analyzed and correlated with the increase in T C measured by magnetometry. The PDOS of all nanostructured samples shows a slightly increased number of low-energy phonon modes and a strong decrease in the number of high-energy phonon modes in comparison to the bulk Sn PDOS. The phonon densities of states, which were determined previously using nuclear resonant inelastic X-ray scattering, were used to calculate the superconducting transition temperature using the Allen-Dynes-McMillan (ADMM) formalism. Both the calculated as well as the experimentally determined values of T C show an increase compared to the bulk superconducting transition temperature. The good agreement between these values indicates that phonon softening has a major influence on the superconducting transition temperature of Sn nanostructures. The influence of electron confinement effects appears to be minor in these systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1998

Carbon Nanotube Based Molecular Electronics

Carbon nanotubes and the nanotube heterojunctions have recently emerged as excellent candidates for nanoscale molecular electronic device components. Experimental measurements on the conductivity, rectifying behavior and conductivity-chirality correlation have also been made. While quasi-one dimensional simple heterojunctions between nanotubes with different electronic behavior can be generated by introduction of a pair of heptagon-pentagon defects in an otherwise all hexagon graphene sheet. Other complex 3- and 4-point junctions may require other mechanisms. Structural stability as well as local electronic density of states of various nanotube junctions are investigated using a generalized tight-binding molecular dynamics (GDBMD) scheme that incorporates non-orthogonality of the orbitals. The junctions investigated include straight and small angle heterojunctions of various chiralities and diameters; as well as more complex 'T' and 'Y' junctions which do not always obey the usual pentagon-heptagon pair rule. The study of local density of states (LDOS) reveal many interesting features, most prominent among them being the defect-induced states in the gap. The proposed three and four pointjunctions are one of the smallest possible tunnel junctions made entirely of carbon atoms. Furthermore the electronic behavior of the nanotube based device components can be taylored by doping with group III-V elements such as B and N, and BN nanotubes as a wide band gap semiconductor has also been realized in experiments. Structural properties of heteroatomic nanotubes comprising C, B and N will be discussed.

Srivastava, Deepak↗
DOE OSTI2024

Universal fine grained asymptotics of free and weakly coupled quantum field theory

We give a rigorous proof that in any free quantum field theory with a finite group global symmetry G, on a compact spatial manifold, at sufficiently high energy, the density of states ρ α (E) for each irreducible representation α of G obeys a universal formula as conjectured by Harlow and Ooguri. We further prove that this continues to hold in a weakly coupled quantum field theory, given an appropriate scaling of the coupling with temperature. This generalizes similar results that were previously obtained in (1 + 1)-D to higher spacetime dimension. We discuss the role of averaging in the density of states, and we compare and contrast with the case of continuous group G, where we prove a universal, albeit different, behavior.

Discrete Symmetries↗
DOE OSTI2023

Nondegenerate surface pair density wave in the kagome superconductor CsV 3 Sb 5 : Application to vestigial orders

On the Sb layer of the kagome superconductor CsV 3 ⁢Sb 5 , pair density wave states have been observed. When the high-temperature charge orderings are treated as static backgrounds, these pair density wave (PDW) states exhibit the same wave vector in the effective two-dimensional Brillouin zone. Interestingly, these PDW states break the same symmetry on the surface. Considering the presence of this nondegenerate PDW, we investigate the implications for the possible existence of a vestigial charge-4⁢ e phase with a nonzero center-of-mass momentum. To distinguish between different vestigial phases, we propose scanning tunneling microscopy experiments. Here we aim to provide insights into the nature of the vestigial phases and their distinct characteristics in CsV 3 ⁢Sb 5 . This research sheds light on the interplay between PDW states, charge orderings, and superconductivity of the kagome superconductor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Site-selective correlations in interacting flat-band quasicrystals

Model lattices such as the kagome and Lieb lattices have been widely investigated to elucidate the properties of interacting flat-band systems. While a quasicrystal does not have proper bands, the noninteracting density of states of several of them displays the typical signature of a flat band pinned at the Fermi level: a delta-function zero-energy peak. Here, we employ quantum Monte Carlo simulations to determine the effect of onsite repulsion on these quasicrystals. While global properties such as the antiferromagnetic structure factor and the specific heat behave similarly as in the case of periodic lattices undergoing a Mott transition, the behavior of the local density of states depends on the coordination number of the site. In particular, sites with the smallest coordination number, which give the dominant spectral-weight contribution to the zero-energy peak, are the ones most strongly impacted by the interaction. Besides establishing site-selective correlations in quasicrystals, our work also points to the importance of the real-space structure of flat bands in interacting systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Effect of solid-electrolyte pellet density on failure of solid-state batteries

Abstract Despite the potentially higher energy density and improved safety of solid-state batteries (SSBs) relative to Li-ion batteries, failure due to Li-filament penetration of the solid electrolyte and subsequent short circuit remains a critical issue. Herein, we show that Li-filament growth is suppressed in solid-electrolyte pellets with a relative density beyond ~95%. Below this threshold value, however, the battery shorts more easily as the density increases due to faster Li-filament growth within the percolating pores in the pellet. The microstructural properties (e.g., pore size, connectivity, porosity, and tortuosity) of $$75\%{{{{{\rm{L}}}}}}{{{{{{\rm{i}}}}}}}_{2}{{{{{\rm{S}}}}}}-25\%{{{{{{\rm{P}}}}}}}_{2}{{{{{{\rm{S}}}}}}}_{5}$$ 75 % L i 2 S − 25 % P 2 S 5 with various relative densities are quantified using focused ion beam–scanning electron microscopy tomography and permeability tests. Furthermore, modeling results provide details on the Li-filament growth inside pores ranging from 0.2 to 2 μm in size. Our findings improve the understanding of the failure modes of SSBs and provide guidelines for the design of dendrite-free SSBs.

25 ENERGY STORAGE↗
DOE OSTI2026

Data for "Plasmon-driven exciton formation in a non-equilibrium Fermi liquid"

This repository contains source data for key plots presented in the manuscript "Plasmon-driven exciton formation in a non-equilibrium Fermi liquid." Experimental data that was analyzed in Igor Pro 8 are presented as the .pxp files used to generate individual sub-plots. Electronic spectral function calculations are provided as .txt files, in which consecutive rows refer to the meshgrid x coordinate, y coordinate, spectral function (and, where relevant, axis-projected local angular momentum). We additionally include the Wannier model and DFT-obtained bulk band structure on which the Wannier model was based. Files are named as the number of the figure in the manuscript to which they correspond, with additional details included where necessary. Details of file names: 2a_DOS_Lxz_Ek_KGM_40layer_xnum_800kpt_tot.txt: Density of states, xz-axis projected local orbital angular momentum, for 800 points along the K-Gamma-M path, for a 40-layer model. 2c_composite_y.pxp: ARPES (angle-resolved photoemission spectroscopy) spectra along the ky axis, including both a scan near the Fermi level and a scan at high kinetic energies. 2d_LCP_RCP_diff_Sect_20K.pxp: difference between ARPES constant energy cuts at T=20 K at E0 + 0.23 eV taken with left- and right-circularly polarized photons. The polarization-integrated intensity at the constant energy cut is also included. 2e_DOS_L45_E11pt79_m0pt25to0pt25_xnum_800kpt_tot.txt: Density of states, xz-projected local orbital angular momentum, and corresponding k-points in two dimensions from ab-initio electronic structure calculations for a constant-energy cut. 3a_[x]_[y]ps: ARPES cut under excitation at a fluence of x uJ/cm2, measured y ps after photoexcitation. Measurements were performed at 9 K. 3b_[x]: Energy distribution curves under excitation at a fluence x uJ/cm2 at selected delay times after photoexcitation. 4a_ImSigma_vs_temperature.pxp: Imaginary self energy (extracted from ARPES linewidths) at different energies above E0 for selected lattice temperatures. 4b_EELS_lowE.pxp: Electron energy loss spectrum over a low energy range 5b_diff_55m15.pxp: Difference between momentum-integrated Tr-ARPES traces at 55 uJ/cm2 and 15 uJ/cm2 photoexcitation. Time-dependent intensity at each energy level has been normalized to a maximum of 1 for each individual fluence prior to subtraction. 5d_invtau_at_EX_vs_fluence.pxp: decay rate at a specified energy EX for different excitation fluences, from single exponential fits. NOTE: Analyses based on the Wannier model presented here should cite both the associated Article and this dataset. For all other files in the repository, citing the dataset alone is sufficient.

Acharya, Rishi [University of Illinois] (ORCID:000↗
DOE OSTI2026

Confinement of quasi-atomic structures in Ti 2 N and Ti 3 N 2 MXene electrides

Metal carbides, nitrides, or carbonitrides of early transition metals, better known as MXenes, possess notable structural, electrical, and magnetic properties. Analyzing electronic structures by calculating structural stability, band structure, density of states, Bader charge transfer, and work functions utilizing first principle calculations, we revealed that titanium nitride MXenes, namely Ti 2 N and Ti 3 N 2 , have excess anionic electrons in their lattice voids, making them MXene electrides. Bulk Ti 3 N 2 has competing antiferromagnetic (AFM) and ferromagnetic (FM) configurations with slightly more stable AFM configuration, while the Ti 2 N MXene is nonmagnetic. Although Ti 3 N 2 favors AFM configuration with hexagonal crystal systems having 6/ mmm point group symmetry, Ti 3 N 2 does not support altermagnetism. The monolayer of the Ti 3 N 2 MXene is a ferromagnetic electride. These unique properties of having non-nuclear interstitial anionic electrons in the electronic structure of titanium nitride MXene have not yet been reported in the literature. Density functional theory calculations show TiN is neither an electride, MXene, or magnetic.

Anionic electrons↗
DOE OSTI2022

Chemical Control of Magnetism in the Kagome Metal CoSn 1 – x In x : Magnetic Order from Nonmagnetic Substitutions

As a two-dimensional structural motif, the kagome net produces many interesting magnetic and electronic properties. In particular, this lattice produces flat electronic bands with a large density of states. When the chemical potential is positioned within these flat bands, electronic instabilities can result. For the kagome metal CoSn, this alignment is not realized, the flat bands are completely filled, and the compound is a Pauli paramagnet. For this study, we have grown crystals and powders of CoSn 1 – x In x and shown that replacing Sn with In moves the chemical potential into the flat band region, as expected from simple electron counting. This is supported by band structure calculations, heat capacity measurements, and angle-resolved photoemission spectroscopy. The increased density of states results in the emergence of antiferromagnetic order evidenced by magnetic susceptibility, Mössbauer spectroscopy, and neutron diffraction data. The Néel temperature reaches a maximum of 32 K. The emergence of magnetic order when introducing a nonmagnetic element into a nonmagnetic kagome metal is striking. This work provides clear evidence that flat bands arising from electronically frustrated lattices in bulk crystals provide a new and powerful way to realize correlated ground states controlled by crystal chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Beyond universal behavior in the one-dimensional chain with random nearest-neighbor hopping

Here, we study the one-dimensional nearest-neighbor tight-binding model of electrons with independently distributed random hopping and no on-site potential (i.e., off-diagonal disorder with particle-hole symmetry, leading to sublattice symmetry, for each realization). For nonsingular distributions of the hopping, it is known that the model exhibits a universal, singular behavior of the density of states $ρ(E) ~ 1/|E\: \text{ln}^3 |E||$ and of the localization length $ξ(E) ~ |\text{ln}|E||$, near the band center $\textit{E}$ = 0 . (This singular behavior is also applicable to random $\textit{XY}$ and Heisenberg spin chains; it was first obtained by Dyson for a specific random harmonic oscillator chain.) Simultaneously, the state at$\textit{E}$ = 0 shows a universal, subexponential decay at large distances $\sim \text{exp}[–\sqrt{r/r_0}]$. In this study, we consider singular, but normalizable, distributions of hopping, whose behavior at small $\textit{t}$ is of the form $\sim 1/[t \text{ln}^{λ+1}(1/t)]$, characterized by a single, continuously tunable parameter λ > 0. We find, using a combination of analytic and numerical methods, that while the universal result applies for λ > 2, it no longer holds in the interval 0 < λ < 2. In particular, we find that the form of the density of states singularity is enhanced (relative to the Dyson result) in a continuous manner depending on the nonuniversal parameter λ; simultaneously, the localization length shows a less divergent form at low energies and ceases to diverge below λ = 1. For λ < 2, the fall-off of the $\textit{E}$ = 0 state at large distances also deviates from the universal result and is of the form $\sim\text{exp}[–(r/r_0)^{1/λ}]$ , which decays faster than an exponential for λ < 1.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Thermal properties of the metallic delafossite PdCo⁢O 2 : A combined experimental and first-principles study

Metallic delafossite materials (e.g., PdCo⁢O 2 , PtCo⁢O 2 ), have attracted much recent attention due to record-high oxide conductivities, the origins of which remain unclear. Relatively little attention has been paid to their related thermal properties, however. Here, we address this via wide temperature range experimental studies of the crystal structure, thermal expansion, and specific heat of single-crystal PdCo⁢O 2 , combined with density-functional theory (DFT) calculations of the electronic and phononic densities of states, and thus thermal properties. PdCo⁢O 2 is shown to retain the $R\bar{3}m$ space group from 12 to 1000 K, exhibiting a- and c-axis thermal expansion in good quantitative agreement with DFT-based lattice dynamics calculations. The Co-O bond lengths additionally elucidate the stability of the low-spin state of the nominally Co 3+ ions, which is a notable difference between the edge-shared Co-O octahedra in PdCo⁢O 2 and the corner-shared octahedra in Co-based perovskites. Measurements of specific heat from 1.9 to 400 K provide accurate values for the Debye temperature and Sommerfeld coefficient, the phononic part being describable via a combined Debye-Einstein approach (accounting for high-frequency oxygen-related optical phonons), with excess intermediate-temperature specific heat due to a prominent low-energy peak in the phonon density of states. Most significantly, all electronic and phononic contributions to the specific heat are shown to be remarkably closely reproduced by DFT-based calculations, establishing quantitative understanding of key thermal properties of the metallic delafossite PdCo⁢O 2 .

36 MATERIALS SCIENCE↗
NASA NTRS2001

Electronic Structure and Properties of Deformed Carbon Nanotubes

A theoretical framework based on Huckel tight-binding model has been formulated to analyze the electronic structure of carbon nanotubes under uniform deformation. The model successfully quantifies the dispersion relation, density of states and bandgap change of nanotubes under uniform stretching, compression, torsion and bending. Our analysis shows that the shifting of the Fermi point away from the Brillouin zone vertices is the key reason for these changes. As a result of this shifting, the electronic structure of deformed carbon nanotubes varies dramatically depending on their chirality and deformation mode. Treating the Fermi point as a function of strain and tube chirality, the analytical solution preserves the concise form of undeformed carbon nanotubes. It predicts the shifting, merging and splitting of the Van Hove singularities in the density of states and the zigzag pattern of bandgap change under strains. Four orbital tight-binding simulations of carbon nanotubes under uniform stretching, compression, torsion and bending have been performed to verify the analytical solution. Extension to more complex systems are being performed to relate this analytical solution to the spectroscopic characterization, device performance and proposed quantum structures induced by the deformation. The limitations of this model will also be discussed.

Yang, Liu↗
DOE OSTI2022

Electrochemical CO2 Reduction over Metal-/Nitrogen-Doped Graphene Single-Atom Catalysts Modeled Using the Grand-Canonical Density Functional Theory

Renewably driven, electrochemical conversion of carbon dioxide into value-added products is expected to be a critical tool in global decarbonization. However, theoretical studies based on the computational hydrogen electrode largely ignore the nonlinear effects of the applied potential on the calculated results, leading to inaccurate predictions of catalytic behavior or mechanistic pathways. Here, we use grand canonical density functional theory (GC-DFT) to model electrochemical CO2 reduction (CO2R) over metal- and nitrogen-doped graphene catalysts (MNCs) and explicitly include the effects of the applied potential. We used GC-DFT to compute the CO2 to CO reaction intermediate energies at -0.3, -0.7, and -1.2 VSHE catalyzed by MNCs each doped with 1 of the 10 3d block metals coordinated by four pyridinic nitrogen atoms. Our results predict that Sc-, Ti-, Co-, Cu-, and Zn-N4Cs effectively catalyze CO2R at moderate to large reducing potentials (-0.7 to -1.2 VSHE). ZnN4C is a particularly promising electrocatalyst for CO2R to CO both at low and moderate applied potentials based on our thermodynamic analysis. Our findings also explain the observed pH independence of CO production over FeN4C and predict that the rate-determining step of CO2R over FeN4C is not *CO2- formation but rather *CO desorption. Additionally, the GC-DFT-computed density of states analysis illustrates how the electronic states of MNCs and adsorbates change non-uniformly with applied potential, resulting in a significantly increased *CO2- stability relative to other intermediates and demonstrating that the formation of the adsorbed *CO2- anion is critical to CO2R activation. This work demonstrates how GC-DFT paves the way for physically realistic and accurate theoretical simulations of reacting electrochemical systems.

CO2 reduction↗
DOE OSTI2026

Thermoelectric Behavior of Structurally Disordered Lanthanide and Actinide Silicides

Lanthanide and actinide intermetallic materials exhibit intriguing electronic, structural, and magnetic properties arising from their partially filled f orbitals. Strong f-electron correlations can significantly modify the electronic density of states, carrier scattering, and transport behavior, making these systems promising candidates for unconventional thermoelectric materials. In previous studies, single crystals of A1.33T4Al8Si2 (A = Ce, Th, U, Np; T = Co, Ni) were synthesized. This structure consists of ordered TAl2 corrugated double layers separated by disordered An–Si monolayers. The inherent disorder within the An–Si layers has been linked to unusual magnetic behavior, such as spin-glass phenomena, and is expected to strongly influence phonon scattering and charge-carrier transport relevant to thermoelectric performance. However, the thermoelectric properties of this material family have not previously been explored. In this work, DFT calculations were performed to evaluate the electronic density of states, band structures, and thermoelectric properties, including the effects of doping. To validate these predictions, Ce1.33Co4Al8Si2 single crystals were grown and experimentally characterized. Additionally, a new Yb1.33Co4Al8Si2 phase was synthesized and characterized using single-crystal XRD, SEM-EDS, magnetization measurements, and thermoelectric measurements. These results provide insight into structure–property relationships governing thermoelectric behavior in f-electron intermetallics and offer guidance for future thermoelectric materials.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗
DOE OSTI2025

Diabatic error and propagation of Majorana zero modes in interacting quantum dots systems

Motivated by recent experimental progress in realizing Majorana zero modes (MZMs) using quantum dot systems, we investigate the diabatic errors associated with the movement of those MZMs. The movement is achieved by tuning time-dependent gate potentials applied to individual quantum dots, effectively creating a moving potential wall. To probe the optimized movement of MZMs, we calculate the experimentally accessible time-dependent fidelity and local density-of-states using many-body time-dependent numerical methods. Furthermore, our analysis reveals that an optimal potential wall height is crucial to preserve the well-localized nature of the MZM during its movement. Moreover, we analyze diabatic errors in realistic quantum-dot systems, incorporating the effects of repulsive Coulomb interactions and disorder in both hopping and pairing terms. Additionally, we provide a comparative study of diabatic errors arising from the simultaneous versus sequential tuning of multiple gates during the MZMs movement. Finally, we estimate the timescale required for MZM transfer in a six-quantum-dot system, demonstrating that MZM movement is feasible and can be completed well within the qubit's operational lifetime in practical quantum-dot setups.

Density of states↗
DOE OSTI2023

Nanoscale Manipulation of Wrinkle-Pinned Vortices in Iron-Based Superconductors

The controlled manipulation of Abrikosov vortices is essential for both fundamental science and logical applications. However, achieving nanoscale manipulation of vortices while simultaneously measuring the local density of states within them remain challenging. Here, we demonstrate the manipulation of Abrikosov vortices by moving the pinning center, namely one-dimensional wrinkles, on the terminal layers of Fe(Te,Se) and LiFeAs, by utilizing low-temperature scanning tunneling microscopy/spectroscopy (STM/S). The wrinkles trap the Abrikosov vortices induced by the external magnetic field. In some of the wrinkle-pinned vortices, robust zero-bias conductance peaks are observed. We tailor the wrinkle into short pieces and manipulate the wrinkles by using an STM tip. Strikingly, we demonstrate that the pinned vortices move together with these wrinkles even at high magnetic field up to 6 T. Our results provide a universal and effective routine for manipulating wrinkle-pinned vortices and simultaneously measuring the local density of states on the iron-based superconductor surfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Competing orders at higher-order Van Hove points

Van Hove points are special points in the energy dispersion, where the density of states exhibits analytic singularities. When a Van Hove point is close to the Fermi level, tendencies towards density wave orders, Pomeranchuk orders, and superconductivity can all be enhanced, often in more than one channel, leading to a competition between different orders and unconventional ground states. In this study we consider the effects from higher-order Van Hove points, around which the dispersion is flatter than near a conventional Van Hove point, and the density of states has a power-law divergence. We argue that such points are present in intercalated graphene and other materials. We use an effective low-energy model for electrons near higher-order Van Hove points and analyze the competition between different ordering tendencies using an unbiased renormalization-group approach. For purely repulsive interactions, we find that two key competitors are ferromagnetism and chiral superconductivity. For a small attractive interaction, we find an unconventional spin Pomeranchuk order, in wich the spin oder parameter winds around the Fermi surface. The supermetal state, predicted for a single higher-order Van Hove point, is an unstable fixed point in our case.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Wormholes and black hole microstates in AdS/CFT

It has long been known that the coarse-grained approximation to the black hole density of states can be computed using classical Euclidean gravity. In this work we argue for another entry in the dictionary between Euclidean gravity and black hole physics, namely that Euclidean wormholes describe a coarse-grained approximation to the energy level statistics of black hole microstates. To do so we use the method of constrained instantons to obtain an integral representation of wormhole amplitudes in Einstein gravity and in full-fledged AdS/CFT. These amplitudes are non-perturbative corrections to the two-boundary problem in AdS quantum gravity. The full amplitude is likely UV sensitive, dominated by small wormholes, but we show it admits an integral transformation with a macroscopic, weakly curved saddle-point approximation. The saddle is the “double cone” geometry of Saad, Shenker, and Stanford, with fixed moduli. In the boundary description this saddle appears to dominate a smeared version of the connected two-point function of the black hole density of states, and suggests level repulsion in the microstate spectrum. Using these methods we further study Euclidean wormholes in pure Einstein gravity and in IIB supergravity on Euclidean AdS 5 × S 5 . We address the perturbative stability of these backgrounds and study brane nucleation instabilities in 10d supergravity. In particular, brane nucleation instabilities of the Euclidean wormholes are lifted by the analytic continuation required to obtain the Lorentzian spectral form factor from gravity. Our results indicate a factorization paradox in AdS/CFT.

79 ASTRONOMY AND ASTROPHYSICS↗