Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cornell”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Effects of stoichiometry and epitaxial strain on the stabilization of infinite-layer nickelates

The discovery of superconductivity in infinite-layer nickelates has sparked great interest due to their potential analogy with the unconventional cuprate superconductors. However, investigations of this system have been limited by the challenges in materials control and synthesis driven by substantial thermodynamic instability, making it difficult to reach an experimental consensus. Hence, establishing a robust synthetic route to highly crystalline infinite-layer nickelates is of paramount importance. Here, we present and discuss recent progress on the reproducible two-step synthesis of (Nd,Sr)NiO2 via the stabilization of high-quality perovskite nickelates and the subsequent topotactic transition to the infinite-layer phase. In particular, we discuss the important factors, such as cation stoichiometry and epitaxial strain, which significantly impact the crystallinity of both phases, accompanied by careful structural characterization. These results on robust synthesis can help accelerate the experimental investigation of the intrinsic physical properties of these complex strongly correlated materials.

36 MATERIALS SCIENCE↗
DOE OSTI2026

High-resolution bandpass x-ray imaging with crystal reflectors: Overcoming geometric aberrations

The imaging problem of a specular reflector is revisited. Retaining terms through the second order in the reflector surface expansion, we derive the form of the aberration-limiting aperture for arbitrary magnification, assuming no bandwidth limitations. A permissible relative aperture size of the reflector is limited by a set relative aberration tolerance and scales with the tangent of the central glancing angle of incidence. These limiting aberrations become practically insignificant near backscattering. The results extend to x-ray diffracting crystals in symmetric Bragg geometry shaped as an ellipsoid of revolution. This geometry permits polychromatic imaging for hard x-rays over a bandwidth defined by the accepted range of Bragg angles, thereby suppressing aberrations of higher orders. We assess ellipsoidal crystal imagers using ray tracing simulations for two high-magnification designs with Bragg angles far from and close to backscattering. Finally, in both cases, the ellipsoidal crystals produce images of higher quality compared to those formed by equivalent toroidal crystal imagers.

Bragg reflection↗
DOE OSTI2020

Complex subsurface hydrothermal fluid mixing at a submarine arc volcano supports distinct and highly diverse microbial communities

Hydrothermally active submarine volcanoes are mineral-rich biological oases contributing significantly to chemical fluxes in the deep sea, yet little is known about the microbial communities inhabiting these systems. Here we investigate the diversity of microbial life in hydrothermal deposits and their metagenomics-inferred physiology in light of the geological history and resulting hydrothermal fluid paths in the subsurface of Brothers submarine volcano north of New Zealand on the southern Kermadec arc. From metagenome-assembled genomes we identified over 90 putative bacterial and archaeal genomic families and nearly 300 previously unknown genera, many potentially endemic to this submarine volcanic environment. While magmatically influenced hydrothermal systems on the volcanic resurgent cones of Brothers volcano harbor communities of thermoacidophiles and diverse members of the superphylum “DPANN,” two distinct communities are associated with the caldera wall, likely shaped by two different types of hydrothermal circulation. The communities whose phylogenetic diversity primarily aligns with that of the cone sites and magmatically influenced hydrothermal systems elsewhere are characterized predominately by anaerobic metabolisms. These populations are probably maintained by fluids with greater magmatic inputs that have interacted with different (deeper) previously altered mineral assemblages. However, proximal (a few meters distant) communities with gene-inferred aerobic, microaerophilic, and anaerobic metabolisms are likely supported by shallower seawater-dominated circulation. Furthermore, mixing of fluids from these two distinct hydrothermal circulation systems may have an underlying imprint on the high microbial phylogenomic diversity. Collectively our results highlight the importance of considering geologic evolution and history of subsurface processes in studying microbial colonization and community dynamics in volcanic environments.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Surrogate optimization of variational quantum circuits

Variational quantum eigensolvers are touted as a near-term algorithm capable of impacting many applications. However, the potential has not yet been realized, with few claims of quantum advantage and high resource estimates, especially due to the need for optimization in the presence of noise. Finding algorithms and methods to improve convergence is important to accelerate the capabilities of near-term hardware for VQE or more broad applications of hybrid methods in which optimization is required. To this goal, we look to use modern approaches developed in circuit simulations and stochastic classical optimization, which can be combined to form a surrogate optimization approach to quantum circuits. Using an approximate (classical CPU/GPU) state vector simulator as a surrogate model, we efficiently calculate an approximate Hessian, passed as an input for a quantum processing unit or exact circuit simulator. This method will lend itself well to parallelization across quantum processing units. We demonstrate the capabilities of such an approach with and without sampling noise and a proof-of-principle demonstration on a quantum processing unit utilizing 40 qubits.

Gustafson, Erik J. [RIACS, Mtn. View] (ORCID:00000↗
DOE OSTI2025

High spatial resolution charge sensing of quantum Hall states

Charge distribution offers a unique fingerprint of important properties of electronic systems, including dielectric response, charge ordering, and charge fractionalization. Here, we develop an architecture for charge sensing in two-dimensional electronic systems in a strong magnetic field. We probe local change of the chemical potential in a proximitized detector layer using scanning tunneling microscopy, allowing us to infer the chemical potential and the charge profile in the sample. Our technique has both high energy (<0.3 meV) and spatial (<10 nm) resolution exceeding that of previous studies by an order of magnitude. We apply our technique to study the chemical potential of quantum Hall liquids in monolayer graphene under high magnetic fields and their responses to charge impurities. The chemical potential measurement provides a local probe of the thermodynamic gap of quantum Hall ferromagnets and fractional quantum Hall states. The screening charge profile reveals spatially oscillatory response of the quantum Hall liquids to charge impurities and is consistent with the composite Fermi liquid picture close to the half-filling. Our technique also paves the way to map moiré potentials, probe Wigner crystals, and investigate fractional charges in quantum Hall and Chern insulators.

charge sensing↗
DOE OSTI2025

Convergent expansions of keystone gene families drive metabolic innovation in Saccharomycotina yeasts

Many remarkable phenotypes have repeatedly occurred across vast evolutionary distances. When convergent traits emerge on the tree of life, they are sometimes driven by the same underlying gene families, while other times, many different gene families are involved. Conversely, a gene family may be repeatedly recruited for a single trait or many different traits. To understand the general rules governing convergence at both genomic and phenotypic levels, we systematically tested associations between 56 binary metabolic traits and gene count in 14,785 gene families from 993 Saccharomycotina yeasts. Using a recently developed phylogenetic approach that reduces spurious correlations, we found that gene family expansion and contraction were significantly linked to trait gain and loss in 45/56 (80%) traits. While 595/739 (81%) significant gene families were associated with only one trait, we also identified several “keystone” gene families that were significantly associated with up to 13/56 (23%) of all traits. Strikingly, most of these families are known to encode metabolic enzymes and transporters, including all members of the industrially relevant MAL tose fermentation loci in the baker’s yeast Saccharomyces cerevisiae. These results indicate that convergent evolution on the gene family level may be more widespread across deeper timescales than previously believed.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Black hole-neutron star binaries near neutron star disruption limit in the mass regime of event GW230529

In May 2023, the LIGO-Virgo-KAGRA (LVK) Collaboration reported the likely black hole-neutron star (BHNS) merger GW230529_181500. The signal was observed with high significance in only one detector, limiting constraints on the black hole spin and motivating our study of disruption in this mass regime. That event is expected to be the merger of a 2.5–4.5 M ⊙ primary with a secondary compact object of mass between 1.2–2.0 M ⊙ . This makes it the first BHNS merger with a significant potential for the production of electromagnetic (EM) counterparts, and provides further evidence for compact objects existing within the suspected lower mass gap. To produce post-merger EM transients, the component of the black hole spin aligned with the orbital angular momentum must be sufficiently high, allowing the neutron star to be tidally disrupted. The disrupting BHNS binary may then eject a few percent of a solar mass of matter, leading to an observable kilonova driven by radioactive decays in ejecta, and/or a compact-binary gamma-ray burst (cbGRB) resulting from the formation of an accretion disk and relativistic jet. Determining which mergers lead to disruption of the neutron star is necessary to predict the prevalence of EM signals from BHNS mergers, yet most BHNS simulations so far have been performed far from the minimum spin required for tidal disruption. Here, we use the Spectral Einstein Code to explore the behavior of BHNS mergers in a mass range consistent with GW230529_181500 close to that critical spin, and compare our results against the mass remnant model currently used by the LVK Collaboration to predict the probability of tidal disruption. Furthermore, our numerical results reveal the emergence of non-zero accretion disks even below the predicted NS disruption limit, of low mass but capable of powering cbGRBs. Our results also demonstrate that the remnant mass model underpredicts the disk mass for the DD2 equation of state, while they are within expected modeling errors for SFHo. The disruption limit itself, however, is not found to significantly differ from the predictions of the analytical model, unless remnant masses M rem ≲ 0.001 M ⊙ prove interesting observationally. In all of our simulations, any kilonova signal would be dim and most likely dominated by post-merger disk outflows.

GW230529_181500↗
DOE OSTI2021

The Large Hadron–Electron Collider at the HL-LHC

The Large Hadron–Electron Collider (LHeC) is designed to move the field of deep inelastic scattering (DIS) to the energy and intensity frontier of particle physics. Exploiting energy-recovery technology, it collides a novel, intense electron beam with a proton or ion beam from the High-Luminosity Large Hadron Collider (HL-LHC). The accelerator and interaction region are designed for concurrent electron–proton and proton–proton operations. This report represents an update to the LHeC’s conceptual design report (CDR), published in 2012. It comprises new results on the parton structure of the proton and heavier nuclei, QCD dynamics, and electroweak and top-quark physics. It is shown how the LHeC will open a new chapter of nuclear particle physics by extending the accessible kinematic range of lepton–nucleus scattering by several orders of magnitude. Due to its enhanced luminosity and large energy and the cleanliness of the final hadronic states, the LHeC has a strong Higgs physics programme and its own discovery potential for new physics. Building on the 2012 CDR, this report contains a detailed updated design for the energy-recovery electron linac (ERL), including a new lattice, magnet and superconducting radio-frequency technology, and further components. Challenges of energy recovery are described, and the lower-energy, high-current, three-turn ERL facility, PERLE at Orsay, is presented, which uses the LHeC characteristics serving as a development facility for the design and operation of the LHeC. An updated detector design is presented corresponding to the acceptance, resolution, and calibration goals that arise from the Higgs and parton-density-function physics programmes. This paper also presents novel results for the Future Circular Collider in electron–hadron (FCC-eh) mode, which utilises the same ERL technology to further extend the reach of DIS to even higher centre-of-mass energies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Simple and statistically sound recommendations for analysing physical theories

Physical theories that depend on many parameters or are tested against data from many different experiments pose unique challenges to statistical inference. Many models in particle physics, astrophysics and cosmology fall into one or both of these categories. These issues are often sidestepped with statistically unsound ad hoc methods, involving intersection of parameter intervals estimated by multiple experiments, and random or grid sampling of model parameters. Whilst these methods are easy to apply, they exhibit pathologies even in low-dimensional parameter spaces, and quickly become problematic to use and interpret in higher dimensions. In this article we give clear guidance for going beyond these procedures, suggesting where possible simple methods for performing statistically sound inference, and recommendations of readily-available software tools and standards that can assist in doing so. Our aim is to provide any physicists lacking comprehensive statistical training with recommendations for reaching correct scientific conclusions, with only a modest increase in analysis burden. Furthermore, our examples can be reproduced with the code publicly available at Zenodo.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

The Atacama Cosmology Telescope: DR6 power spectrum foreground model and validation

We discuss the model of astrophysical emission at millimeter wavelengths used to characterize foregrounds in the multi-frequency power spectra of the Atacama Cosmology Telescope (ACT) Data Release 6 (DR6), expanding on Louis et al. (2025) (2503.14452). We detail several tests to validate the capability of the DR6 parametric foreground model to describe current observations and complex simulations, and show that cosmological parameter constraints are robust against model extensions and variations. We demonstrate consistency of the model with pre-DR6 ACT data and observations from Planck and the South Pole Telescope. We evaluate the implications of using different foreground templates and extending the model with new components and/or free parameters. In all scenarios, the DR6 ΛCDM and ΛCDM+N eff cosmological parameters shift by less than 0.5σ relative to the baseline constraints. Some foreground parameters shift more; we estimate their systematic uncertainties associated with modeling choices. From our constraint on the kinematic Sunyaev-Zel'dovich power, we obtain a conservative limit on the duration of reionization of Δz rei < 4.4, assuming a reionization midpoint consistent with optical depth measurements and a minimal low-redshift contribution, with varying assumptions for this component leading to tighter limits. Finally, we analyze realistic non-Gaussian, correlated microwave sky simulations containing Galactic and extragalactic foreground fields, built independently of the DR6 parametric foreground model. Processing these simulations through the DR6 power spectrum and likelihood pipeline, we recover the input cosmological parameters of the underlying cosmic microwave background field, a new demonstration for small-scale CMB analysis. These tests validate the robustness of the ACT DR6 foreground model and cosmological parameter constraints.

CMBR experiments↗
DOE OSTI2020

The ABC130 barrel module prototyping programme for the ATLAS strip tracker

For the Phase-II Upgrade of the ATLAS Detector [1], its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100% silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000 modules in the forward region (end-caps), which are foreseen to be constructed over a period of 3.5 years. The construction of each module consists of a series of assembly and quality control steps, which were engineered to be identical for all production sites. In order to develop the tooling and procedures for assembly and testing of these modules, two series of major prototyping programs were conducted: an early program using readout chips designed using a 250 nm fabrication process (ABCN-250) [2,2] and a subsequent program using a follow-up chip set made using 130 nm processing (ABC130 and HCC130 chips). This second generation of readout chips was used for an extensive prototyping program that produced around 100 barrel-type modules and contributed significantly to the development of the final module layout. This paper gives an overview of the components used in ABC130 barrel modules, their assembly procedure and findings resulting from their tests.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Degradation and deforestation increase the sensitivity of the Amazon Forest to climate extremes

About 40% of the Brazilian Amazon has been deforested or suffered changes in forest structure through degradation (selective logging, fires, and fragmentation). The impact of forest degradation on the forest’s sensitivity to climate extremes has not been fully explored because of a lack of data and the complex interplay of forest structure and climate drivers. Here, we combined forest structure data from 545 airborne lidar transects (375 ha each) across the Brazilian Amazon with the Ecosystem Demography Model (ED2). We explore the forest’s functional response to near-present (1981–2019) climate extremes under observed forest structure from lidar ( Control ) and two forest structure change scenarios: (1) forest recovery by excluding all future deforestation and degradation ( Recovery ) and (2) expansion of selective logging and deforestation ( Degradation ). Using the Control simulation, we found a close and positive association between local forest aboveground biomass and the predicted gross primary productivity (GPP) and evapotranspiration (ET). Moreover, both GPP and ET respond negatively to extremes in vapor pressure deficit and downwelling shortwave irradiance in degraded forests in Eastern and Southern Amazon, indicating high sensitivity to droughts. Locally high-biomass forest patches showed little or no negative response of GPP and ET to extreme drought conditions whereas low-biomass forest patches in the same locations—typically degraded forest canopies—responded negatively to higher moisture stress. The results from the Recovery scenario showed similar results to simulations with observed structure; however, under the Degradation scenario, low-biomass forest patches became more abundant, resulting in more regions where GPP and ET are negatively impacted by hot drought conditions according to the ED2 model. Our results suggest that local forest structure is a critical determinant of an ecosystem’s response to climate variability, and that the loss of canopy trees in the Amazon through forest degradation could increase and expand forest vulnerability to droughts.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Downscaled CMIP5 projections of physical fire risk understate historical trends

Reliable projections of wildfire risk are important for multi-sector impacts analysis. Statistically downscaled and bias-corrected Earth system model ensemble products are routinely used to analyze regional physical wildfire risk, but evaluations of historical observed trends and variability are lacking. Here, we evaluate physical fire risk over the western United States using the Canadian Forest Fire Weather Index (FWI) by comparing model outputs from the Coupled Model Intercomparison Project Phase 5 (CMIP5), statistically downscaled via the Multivariate Adaptive Constructed Analogs (MACA) approach, against the observational target dataset gridMET, a gridded high-resolution surface meteorological product. We analyze multidecadal trends and interannual variability in seasonal average FWI for the historical period and future projections under two emissions scenarios, and we compare MACA-CMIP5 ensemble results with a simple time series model that generates historical and future projections of seasonal FWI based on bootstrapping observed historical trends and variability. Our findings indicate that MACA-CMIP5 accurately captures the magnitude and spatial patterns of seasonally averaged FWI but tends to underestimate historical decadal trends. We show that future increases in fire risk may be underestimated relative to the simple time series model that projects historical variability into the future. We also highlight that model biases in relative humidity contribute significantly to model-data differences. Our results underscore the importance of historical hindcasting exercises for informing broader multi-sector applications.

FWI↗
DOE OSTI2024

Roadmap on basic research needs for laser technology

Motivated by the profound impact of laser technology on science, arising from an increase in focused light intensity by seven orders of magnitude and flashes so short electron motion is visible, this roadmap outlines the paths forward in laser technology to enable the next generation of science and applications. Despite remarkable progress, the field confronts challenges in developing compact, high-power sources, enhancing scalability and efficiency, and ensuring safety standards. Future research endeavors aim to revolutionize laser power, energy, repetition rate and precision control; to transform mid-infrared sources; to revolutionize approaches to field control and frequency conversion. These require reinvention of materials and optics to enable intense laser science and interdisciplinary collaboration. The roadmap underscores the dynamic nature of laser technology and its potential to address global challenges, propelling progress and fostering sustainable development. Ultimately, advancements in laser technology hold promise to revolutionize myriad applications, heralding a future defined by innovation, efficiency, and sustainability.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Realizing the scientific program with polarized ion beams at the future BNL Electron Ion Collider

Polarized ion beams at the Electron Ion Collider (EIC) are essential to address some of the most important open questions at the twenty-first century frontiers of understanding of the fundamental structure of matter. Here, in this work, we summarize the science case and identify polarized 2 H, 3 He, 6 Li, and 7 Li ion beams as critical technology that will enable experiments which address the most important science. Furthermore, we discuss the required ion polarimetry and spin manipulation at the EIC. The current EIC accelerator design is presented. We identify a significant research and development effort across national and international laboratories and universities that is required over about a decade to realize the polarized ion beams and estimate (based on previous experience) that it will require about 20 full-time equivalent (FTE) over 10 years (or a total of about 200 FTE-years) of personnel, including graduate students, postdoctoral researchers, technicians, and engineers. Attracting, educating, and training a new generation of physicists in experimental spin techniques will be essential for the successful realization. Artificial intelligence and machine learning are seen as having significant potential for both acceleration of research and development and amplification of discovery in the optimal realization of this unique quantum technology on a cutting-edge collider. The research and development effort is synergistic with research in atomic physics and fusion energy science.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Multipolar Fermi Surface Deformations in Sr 2 ⁢RuO 4 Probed by Resistivity and Sound Attenuation: A Window into Electron Viscosity and the Collision Operator

Recent developments in electron hydrodynamics have demonstrated the importance of considering the full structure of the electron-electron scattering operator, which encodes a sequence of lifetimes, one for each component of the Fermi surface deformation in a multipolar expansion. In this context, the dipolar lifetime is measured by resistivity, whereas the quadrupolar component probes the viscosity and can be measured in the bulk via sound attenuation. We introduce a framework to extract the collision operator of an arbitrary metal by combining resistivity and sound attenuation measurements with a realistic calculation of the scattering operator that includes multiband and umklapp effects. The collision operator allows for the prediction of a plethora of properties, including the nonlocal conductivity, and can be used to predict hydrodynamic behavior for bulk metals. As a first application, we apply this framework to Sr 2 ⁢RuO 4 in a temperature range where electron-electron scattering is dominant. Furthermore, we find quantitative agreement between our model and the temperature dependence of both the resistivity and the sound attenuation, we find the quadrupolar (𝐵 1⁢𝑔 ) relaxation rate to be 30% higher than the dipolar one due to the presence of hot spots on the 𝛾 band, and we predict a strongly anisotropic viscosity arising from the 𝛼 and 𝛽 bands.

Boltzmann theory↗
DOE OSTI2026

Strong long-wavelength electron-phonon coupling in Ta 2 ⁢Ni⁡(Se,S) 5

The search for intrinsic excitonic insulators (EI) has long been confounded by coexisting electron–phonon coupling in bulk materials. Although the ground state of an EI may be difficult to differentiate from density-wave orders or other structural instabilities, excited states offer distinctive signatures. One way to provide clarity is to directly inspect the phonon spectral function for long wavelength broadening caused by phonon interaction with the high velocity EI phason. Here, in this study, we report that the quasi-one-dimensional (quasi-1D) EI candidate Ta 2 NiSe 5 shows extremely anisotropic phonon broadening and softening in the semimetallic normal state. In contrast, such behavior is completely absent in the broken symmetry state of Ta 2 NiSe 5 and in the isostructural Ta 2 NiS 5 , where the latter has a fully gapped normal state. By contrasting the expected phonon lifetimes in the BCS and BEC limits of a putative EI, our results suggest that the phase transition in Ta 2 Ni(Se,S) 5 family is closely related to strong interband electron–phonon coupling. We experimentally determine the dimensionless coupling $\frac{g}{ω_0}$ ∼ 10, revealing Ta 2 Ni(Se,S) 5 as a rare “ultrastrong coupling” material.

Kang, Zhibo [Yale University, New Haven, CT (Unite↗