Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Common data models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

A dynamic response and eye scanning data base useful in the development of theories and methods for the description of control/display relationships

A set of specially prepared digital tapes is reported which contain synchronized measurements of pilot scanning behavior, control response, and vehicle response obtained during instrument landing system approaches made in a fixed-base DC-8 transport simulator. The objective of the master tape is to provide a common data base which can be used by the research community to test theories, models, and methods for describing and analyzing control/display relations and interactions. The experimental conditions and tasks used to obtain the data and the detailed format of the tapes are described. Conventional instrument panel and controls were used, with simulated vertical gust and glide slope beam bend forcing functions. Continuous pilot eye fixations and scan traffic on the panel were measured. Both flight director and standard localizer/glide slope types of approaches were made, with both fixed and variable instrument range sensitivities.

Klein, R.↗

Psychoacoustic Analysis of Synthesized Jet Noise

An aircraft noise synthesis capability is being developed so the annoyance caused by proposed aircraft can be assessed during the design stage. To make synthesized signals as realistic as possible, high fidelity simulation is required for source (e.g., engine noise, airframe noise), propagation and receiver effects. This psychoacoustic study tests whether the jet noise component of synthesized aircraft engine noise can be made more realistic using a low frequency oscillator (LFO) technique to simulate fluctuations in level observed in recordings. Jet noise predictions are commonly made in the frequency domain based on models of time-averaged empirical data. The synthesis process involves conversion of the frequency domain prediction into an audible pressure time history. However, because the predictions are time-invariant, the synthesized sound lacks fluctuations observed in recordings. Such fluctuations are hypothesized to be perceptually important. To introduce time-varying characteristics into jet noise synthesis, a method has been developed that modulates measured or predicted 1/3-octave band levels with a (<20Hz) LFO. The LFO characteristics are determined through analysis of laboratory jet noise recordings. For the aft emission angle, results indicate that signals synthesized using a generic LFO are perceived as more similar to recordings than those using no LFO, and signals synthesized with an angle-specific LFO are more similar to recordings than those synthesized with a generic LFO.

Okcu, Selen↗

Artificial Intelligence for Data Center Operations (AI Ops)

HPC data centers such as the one at NREL's ESIF will increasingly need to rely on automation to keep pace with exascale growth in compute capability and to manage and optimize the data center environment and facility resources. Artificial intelligence (AI) and machine learning (ML) approaches provide the means to improve HPC data center efficiency (energy, operational, and managerial efficiency) and resiliency by learning historical trends and training models to operate on real-time data collected from both IT and facilities sources. The goal of coupled improvement of data center resiliency and energy efficiency through automated data collection and AI has led to a multi-year, multi-staged collaboration between NREL and Hewlett-Packard Enterprise's Advanced Technology Group, referred to as Artificial Intelligence for Data Center Operations (AIOps). The extended efforts within the AIOps project include a common goal of building capabilities for an advanced smart facility and demonstration of data collection and AI modeling techniques in the ESIF data center.

97 MATHEMATICS AND COMPUTING↗

Machine-learning-based investigation of the variables affecting summertime lightning occurrence over the Southern Great Plains

Lightning is affected by many factors, many of which are not routinely measured, well understood, or accounted for in physical models. Several commonly used machine learning (ML) models have been applied to analyze the relationship between Atmospheric Radiation Measurement (ARM) data and lightning data from the Earth Networks Total Lightning Network (ENTLN) in order to identify important variables affecting lightning occurrence in the vicinity of the Southern Great Plains (SGP) ARM site during the summer months (June, July, August and September) of 2012 to 2020. Testing various ML models, we found that the random forest model is the best predictor among common classifiers. When convective clouds were detected, it predicts lightning occurrence with an accuracy of 76.9 % and an area under the curve (AUC) of 0.850. Using this model, we further ranked the variables in terms of their effectiveness in nowcasting lightning and identified geometric cloud thickness, rain rate and convective available potential energy (CAPE) as the most effective predictors. The contrast in meteorological variables between no-lightning and frequent-lightning periods was examined for hours with CAPE values conducive to thunderstorm formation. Besides the variables considered for the ML models, surface variables and mid-altitude variables (e.g., equivalent potential temperature and minimum equivalent potential temperature, respectively) have statistically significant contrasts between no-lightning and frequent-lightning hours. For example, the minimum equivalent potential temperature from 700 to 500 hPa is significantly lower during frequent-lightning hours compared with no-lightning hours. Finally, a notable positive relationship between the intracloud (IC) flash fraction and the square root of CAPE ($\sqrt{CAPE}$) was found, suggesting that stronger updrafts increase the height of the electrification zone, resulting in fewer flashes reaching the surface and consequently a greater IC flash fraction.

54 ENVIRONMENTAL SCIENCES↗

A model to calculate fatigue damage caused by partial waking during wind farm optimization

Abstract. Wind turbines in wind farms often operate in waked or partially waked conditions, which can greatly increase the fatigue damage. Some fatigue considerations may be included, but currently a full fidelity analysis of the increased damage a turbine experiences in a wind farm is not considered in wind farm layout optimization because existing models are too computationally expensive. In this paper, we present a model to calculate fatigue damage caused by partial waking on a wind turbine that is computationally efficient and can be included in wind farm layout optimization. The model relies on analytic velocity, turbulence, and load models commonly used in farm research and design, and it captures some of the effects of turbulence on the fatigue loading. Compared to high-fidelity simulation data, our model accurately predicts the damage trends of various waking conditions. We also perform example wind farm layout optimizations with our presented model in which we maximize the annual energy production (AEP) of a wind farm while constraining the damage of the turbines in the farm. The results of our optimization show that the turbine damage can be significantly reduced, more than 10 %, with only a small sacrifice of around 0.07 % to the AEP, or the damage can be reduced by 20 % with an AEP sacrifice of 0.6 %.

17 WIND ENERGY↗

Learning Constitutive Relations From Soil Moisture Data via Physically Constrained Neural Networks

Abstract The constitutive relations of the Richardson‐Richards equation encode the macroscopic properties of soil water retention and conductivity. These soil hydraulic functions are commonly represented by models with a handful of parameters. The limited degrees of freedom of such soil hydraulic models constrain our ability to extract soil hydraulic properties from soil moisture data via inverse modeling. We present a new free‐form approach to learning the constitutive relations using physically constrained neural networks. We implemented the inverse modeling framework in a differentiable modeling framework, JAX, to ensure scalability and extensibility. For efficient gradient computations, we implemented implicit differentiation through a nonlinear solver for the Richardson‐Richards equation. We tested the framework against synthetic noisy data and demonstrated its robustness against varying magnitudes of noise and degrees of freedom of the neural networks. We applied the framework to soil moisture data from an upward infiltration experiment and demonstrated that the neural network‐based approach was better fitted to the experimental data than a parametric model and that the framework can learn the constitutive relations.

54 ENVIRONMENTAL SCIENCES↗

A non-cooperative meta-modeling game for automated third-party calibrating, validating and falsifying constitutive laws with parallelized adversarial attacks

The evaluation of constitutive models, especially for high-risk and high-regret engineering applications, requires efficient and rigorous third-party calibration, validation and falsification. While there are numerous efforts to develop paradigms and standard procedures to validate models, difficulties may arise due to the sequential, manual, and often biased nature of the commonly adopted calibration and validation processes, thus slowing down data collections, hampering the progress towards discovering new physics, increasing expenses and possibly leading to misinterpretations of the credibility and application ranges of proposed models. This work attempts to introduce concepts from game theory and machine learning techniques to overcome many of these existing difficulties. Here, we introduce an automated meta-modeling game where two competing AI agents systematically generate experimental data to calibrate a given constitutive model and to explore its weakness such that the experiment design and model robustness can be improved through competitions. The two agents automatically search for the Nash equilibrium of the meta-modeling game in an adversarial reinforcement learning framework without human intervention. In particular, a protagonist agent seeks to find the more effective ways to generate data for model calibrations, while an adversary agent tries to find the most devastating test scenarios that expose the weaknesses of the constitutive model calibrated by the protagonist. By capturing all possible design options of the laboratory experiments into a single decision tree, we recast the design of experiments as a game of combinatorial moves that can be resolved through deep reinforcement learning by the two competing players. Our adversarial framework emulates idealized scientific collaborations and competitions among researchers to achieve a better understanding of the application range of the learned material laws and prevent misinterpretations caused by conventional AI-based third-party validation. Numerical examples are given to demonstrate the wide applicability of the proposed meta-modeling game with adversarial attacks on both human-crafted constitutive models and machine learning models.

97 MATHEMATICS AND COMPUTING↗

Seyfert galaxy narrow-line regions. II - Kinematic models

A class of kinematic models for the narrow-line regions of active galactic nuclei is presented. The models incorporate continuity-constrained radial flow of emitting material in a bounded, spherical geometry. They are designed to represent the narrow-line regions in as simple a manner as is consistent with current knowledge. The systematic comparison of line profiles arising from the models to the spectra in the forbidden O III lambda 5007 emission line which have been described in Paper I of this series is used as a probe of the line-emitting region kinematics: the model parameter areas of interest are identified and tested for consistency with the data. The results indicate heterogeneous kinematic conditions; the most common pattern is outflow of emitting material in a radially decelerating velocity field in the presence of distributed obscuration. However, some observed line profiles can be fitted by several model profiles from very different kinematic conditions, indicating that the information in a spatially unresolved line profile is insufficient to constrain uniquely the geometry and kinematics of the line-emitting region. Although the specific conclusions are model dependent, a predominantly radial pattern of velocities and a distribution of obscuring material are probably essential features of any successful kinematic model of the narrow-line regions.

Vrtilek, J. M.↗

Vertical Structure in Phytoplankton Growth and Productivity Inferred From Biogeochemical-Argo Floats and the Carbon-Based Productivity Model

Estimates of marine net primary production (NPP) commonly rely on limited in situ 14C incubations or satellite-based algorithms mainly constrained to the surface ocean. Here we combine data from biogeochemical Argo floats with a carbon-based productivity model (CbPM) to compute vertically-resolved estimates of NPP. Inferred NPP profiles derived by informing the CbPM with float-based, depth-resolved, bio-optical data are able to qualitatively reproduce the vertical structure in NPP inferred from in situ 14C incubations at various ocean regions. At station ALOHA, float-based estimates agree within uncertainty with productivity observations at depth, but underestimate surface NPP. We test the ability of the CbPM to infer the depth-resolved structure in NPP from bio-optical properties in the mixed layer, in similar fashion as how remote sensing algorithms of ocean productivity operate. In Southern Ocean waters, the depth-reconstructing implementation of the CbPM overestimates phytoplankton division rates and Chl:C below the mixed layer, resulting in artificially high subsurface NPP when compared with the fully float-informed implementation of the model. The CbPM subsurface extrapolation of phytoplankton Chl, Chl:C division rates, and NPP improves by accounting for deep nutrient (iron) stress impacts on photoacclimation in the Southern Ocean. This improvement is also observed in vertically- integrated NPP, where the mean bias between model implementations in depth-integrated productivity south of 30◦S is reduced by 62 % when account for deep iron limitation. Our results demonstrate that profiling data from biogeochemical Argo floats can serve to inform regional adjustments that lead to the improvement of marine productivity algorithms.

NPP↗

Quality Guidelines for Energy System Studies: Process Modeling Design Parameters

The National Energy Technology Laboratory (NETL) conducts systems analysis studies that require a large number of inputs, from ambient conditions to parameters for Aspen Plus ® (Aspen) process blocks. The sheer number of assumptions required makes it impractical to document all of them in each issued report. The purpose of the Quality Guidelines for Energy System Studies (QGESS) is to document the assumptions most commonly used in system analysis studies and the basis for those assumptions. In order to develop the systems analysis models presented in various NETL reports, significant vendor data have been obtained, and these data enhance the model outputs. Much of the vendor data obtained are considered proprietary and not suitable for public release or attribution to a specific vendor. As such, several sub-systems common in NETL reports and their process parameter data are not reported in this document to protect proprietary vendor information. The values and ranges of values presented in this report represent assumptions that have been made in previous studies.

97 MATHEMATICS AND COMPUTING↗

Common-Cause Component Group Modeling Issues in Probabilistic Risk Assess

Common cause failures (CCFs) have been recognized as significant risk contributors in probabilistic risk assessments (PRAs) for commercial nuclear power plants (NPPs) since 1980s. A series of reports including those of United States Nuclear Regulatory Commission (NRC) regulations (NUREGs) have been published from late 1980s to early 2000s to provide guidelines for performing CCF event data analysis and modeling CCF in PRA. However, there are still some issues existed in CCF modeling and CCF parameter estimations. One of such issues is the modeling of multiple common-cause component group (CCCG) for the same component in a PRA model. This paper exams the CCCG definition and the requirements from the PRA standard, investigates the CCCG modeling practices and issues existing in PRAs, and presents systematic approaches and guidelines to model CCCG in PRA properly and consistently.

99 GENERAL AND MISCELLANEOUS↗

SPASE: Current Uses, Tools, and Plans

The Space Physics Archive Search and Extract (SPASE) project is an international collaboration among Heliophysics (solar and space physics) groups concerned with data acquisition and archiving. Within this community there are a variety of old and new data centers, resident archives, "virtual observatories", etc. acquiring, holding, and distributing data. The main product of the SPASE group is an XML-based SPASE Data Model now in operational use to enable searches for and ultimate acquisition of data of interest to a researcher. The SPASE Data Model defines the content of resource descriptions (metadata). The intent is to describe all SCientifically usable Heliophysics data sets using the Data Model. Another product of the SPASE group, in collaboration with NASA's Virtual Observatories, is a set of tools and services which work with SPASE meta data. This includes Registry Services which can retrieve and render metadata using resource identifiers and facilitate the downloading of the data referenced by the meta data. The SPASE Data Model has also been used as a vocabulary in specialized data models. One example is the Heliophysics Event List Manager (HELM) model. The SPASE Data Model is also being expanded to provide the means for more detailed description of data sets with the aim of enabling more automated ingestion and use of the data through detailed format descriptions. The evolution is based on a number of lessons learned and feedback from our community. Some of the lessons learned are unique to Heliophysics, and some are common to the various data diSCiplines. We will discuss the present state of SPASE usage, the role the SPASE Data Model can play in speCialized data models and how we foresee the development direction in the future.

Thieman, J. R.↗

Dealing with Ion LET Uncertainties: An Application of Generalized Linear Models

Although most SEE rate estimation methods presume a fit to SEE cross section vs. LET, fitting SEE data is challenging because the data are not compatible with the assumptions of many common fitting techniques (e.g. linear regression. The difficulty of fitting such data is compounded when the LET of the ion responsible for an SEE is uncertain. We modify a Generalized Linear Model SEE data fitting methodology to accommodate uncertain LET and apply the method to the problem of backside heavy-ion SEE testing to demonstrate the utility of the method, explore the dependence of systematic errors that arise from improper treatment of LET uncertainty and develop guidelines for minimizing such systematic errors when proper treatment is not possible. Additional applications are suggested and assessed for suitability of treatment by the model.

Single-event effects↗

Bias Correcting NOAA's High-Resolution Rapid Refresh (HRRR) Wind Resource Data for Grid Integration Applications [Slides]

Many weather years of high-quality wind data are widely accepted in the grid integration community to be important for studying wind energy technical potential, energy system operations, and grid resilience. NREL makes high-quality wind and solar resource data available. NREL's Grid-Atmosphere workshop (March 2024) identified NREL National Solar Radiation Database as widely used in grid integration modeling, but there is less agreement on commonly used wind datasets. One important factor identified by ESIG's 2023 report 'Weather Dataset Needs for Planning and Analyzing Modern Power Systems' for gold standard wind data is regular updates. To address the need for regular updates, NREL's team can now process all currently available and regularly updated High-Resolution Rapid Refresh (HRRR) outputs. HRRR is an hourly-updated operational forecast product produced by the National Oceanic and Atmospheric Administration (NOAA) (Dowell et al., 2022). One barrier to NREL using HRRR is systematic bias and consistency with NREL's existing wind datasets (e.g. WIND Toolkit, 'WTK') across weather years. To address this barrier, we show that the HRRR can be interpolated and bias-corrected to be consistent with NRE's existing datasets. We call the new dataset BC-HRRR (bias-corrected HRRR). As with historical datasets like the WTK, BC-HRRR is intended for use in grid integration modeling (e.g., capacity expansion, production cost, and resource adequacy modeling). BC-HRRR's (2015-present) consistency with WTK (2007-2013) allows NREL to extend internal grid integration tooling with 15+ weather years of wind data with low-overhead extensibility to future years as they are made available by NOAA. The rest of this slide deck documents the BC-HRRR processing methods, validation, and its implications for intended use.

17 WIND ENERGY↗

Fundamental procedures of geographic information analysis

Analytical procedures common to most computer-oriented geographic information systems are composed of fundamental map processing operations. A conceptual framework for such procedures is developed and basic operations common to a broad range of applications are described. Among the major classes of primitive operations identified are those associated with: reclassifying map categories as a function of the initial classification, the shape, the position, or the size of the spatial configuration associated with each category; overlaying maps on a point-by-point, a category-wide, or a map-wide basis; measuring distance; establishing visual or optimal path connectivity; and characterizing cartographic neighborhoods based on the thematic or spatial attributes of the data values within each neighborhood. By organizing such operations in a coherent manner, the basis for a generalized cartographic modeling structure can be developed which accommodates a variety of needs in a common, flexible and intuitive manner. The use of each is limited only by the general thematic and spatial nature of the data to which it is applied.

Berry, J. K.↗

The parental magma for some rocks from the Norite 1 subzone of the Stillwater Complex - A lunar analog study

Single samples from three successive homogeneous but contrasting layers (anorthosite, anorthositic norite, and norite) in the Stillwater Complex Norite 1 subzone were subjected to detailed petrographic and major and trace element chemical analyses. The petrography and the element chemistry of the three layers are found to be generally consistent with formation from a common magma, although a simple model of liquidus phases and trapped magma is not quite consistent with petrography and chemistry. Changes of oxidation level from layer to layer are indicated by both iron in plagioclase and by the distribution coefficient for Eu required for compatibility with a common parent. Such oxidation changes can explain qualitatively the Mg/Fe variation otherwise attributed to trapped liquid. The data demonstrate that for individual lunar highlands igneous rocks, a general picture of the parent magma can be derived, but detailed petrochemical comparisons using a simple trapped liquid model might deny a common parentage for two samples when such in fact existed.

Ryder, G.↗

Detonation performance experiments and modeling for the DAAF-based high explosive PBX 9701

Detonation performance experiments and modeling are reported for the explosive PBX 9701, which is composed of 97% 3,3$\acute{-}$diamino-4,4$\acute{-}$azoxyfurazan (DAAF) and 3% vinylidene uoride-chlorotriuoroethylene copolymer (Kel-F 800) binder by weight. PBX 9701 is a newly-developed reducedsensitivity explosive with increased performance relative to the triaminotrinitrobenzene or TATB-based PBX 9502 while still retaining low sensitivity to mechanical insult. The first detonation performance measurements for this formulation are presented, including front-curvature ratesticks and cylinder expansion test data. Prior shock initiation data is also reviewed. These data are used to develop programmed burn and reactive flow calibrations for existing commonly-used performance models which allow engineering calculations with PBX 9701. The calibration process involves several enhancements relative to conventional approaches including the use of an analytical scaling correlation to speed the calibration process and development of a new methodology to improve the consistency between the programmed burn and reactive model calibration process and the resulting calculations. Overall, PBX 9701 is seen to exhibit improved performance relative to insensitive explosives, with a trinitrotoluene (TNT) equivalence of 1.24. The detonation performance properties are found to be well captured by existing models.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

An improved dataset for predicting mammal infecting viruses from genetic sequence information

There have been several attempts to develop machine learning (ML) models to identify human infecting viruses from their genomic sequences, with varying degrees of success. Direct comparison between models is problematic, because these models are typically trained and evaluated on different datasets with alternative data splitting schemes, features, and model performance metrics. In this paper we present a standardized dataset of mammal infecting and non-infecting viral pathogens, refined from the previous work of Mollentze et al. to include the latest literature evidence, roughly doubling the number of curated host-virus records available to the community, and new host target labels, primate and mammal. The new host labels were included for several reasons, including previous reports that classification performance is better at broader taxonomic ranks and the idea that there may be more data for primate infection that might serve as a suitable proxy for zoonotic potential and avoidance of false positives for human infection due to absence of evidence. On this dataset, we report the performance of eight machine learning models for predicting mammal-infecting viruses from their genomic sequences. We find that randomly assigning cases in our improved dataset to training/testing sets, when compared to the original assignments into training/testing in Mollentze et al., increases the overall average ROC AUC of prediction of human infection from 0.663 ± 0.070 to 0.784 ± 0.013, consistent with the reduction in phylogenetic distance between train and test sets (relative entropy change from 3.00 to 0.08). The broadest host category of mammal infection can be predicted most reliably at 0.850 ± 0.020. We share our improved dataset and code to enable standardized comparisons of machine learning methods to predict human host infections. Overall, we have presented preliminary evidence that classification of virus host infection is more tractable at higher taxonomic ranks, that unsurprisingly reducing the phylogenetic distance between training and test sets can improve predictive performance, that peptide kmer features appear to be harmful to out of sample model performance, and we are left with the question of whether models for virus host prediction can reasonably be expected to perform well in out of sample scenarios given the likelihood that viruses do not share a common ancestor. Consistent with this concern, when the data is resampled such that there is no overlap between viral families in training and test sets (relative entropy > 24), models perform no better than random chance at prediction of human infection regardless of whether kmers are included (ROC AUC 0.50 ± 0.08) or not (ROC AUC 0.50 ± 0.04).

59 BASIC BIOLOGICAL SCIENCES↗