Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Chemical compatibility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Evaluation of available analytical techniques for monitoring the quality of space station potable water

To assure the quality of potable water (PW) on the Space Station (SS) a number of chemical and physical tests must be conducted routinely. After reviewing the requirements for potable water, both direct and indirect analytical methods are evaluated that could make the required tests and improvements compatible with the Space Station operation. A variety of suggestions are made to improve the analytical techniques for SS operation. The most important recommendations are: (1) the silver/silver chloride electrode (SB) method of removing I sub 2/I (-) biocide from the water, since it may interfere with analytical procedures for PW and also its end uses; (2) the orbital reactor (OR) method of carrying out chemistry and electrochemistry in microgravity by using a disk shaped reactor on an orbital table to impart artificial G force to the contents, allowing solution mixing and separation of gases and liquids; and (3) a simple ultra low volume highly sensitive electrochemical/conductivity detector for use with a capillary zone electrophoresis apparatus. It is also recommended, since several different conductivity and resistance measurements are made during the analysis of PW, that the bipolar pulse measuring circuit be used in all these applications for maximum compatibility and redundancy of equipment.

Geer, Richard D.↗
NASA NTRS1980

The identification of trends in outgassing technology

A large amount of chemical analysis data involving identification of outgassing products from spacecraft, experiment modules, and support equipment accumulated at the Goddard Space Flight Center over the past ten years were reduced to a computer compatible format and subjected to a variety of relevant program operations. From these data a list of the most troublesome outgassing species were compiled and several useful and interesting materials' correlations were developed. The frequency of occurrence totals show that in aerospace program, di(2-ethyl hexyl) phthalate (DEHP) is the most often found individual species in outgassing samples and that esters are the leading generic class of compounds. The effectiveness of this data bank was demonstrated by the good correlations between materials and their outgassing products for solar panel bakeouts and cable bakeouts. However, trends in frequency of occurrence of many compounds were demonstrated where no correlation could be established. In the case of the class of compounds called aliphatic hydrocarbons, it is shown that the number of instances of significant outgassing due to these materials is increasing.

Colony, J. A.↗
NASA NTRS1992

Origin of yellow glasses associated with Apollo 15 KREEP basalt fragments

The occurrence and chemical compositions of some uncommon yellow to yellowish orange glasses associated with KREEP basalt fragments in Apollo 15 solids of possibly pyroclastic origins are discussed. The glasses show compositional variations that are compatible with igneous fractionation trends. A scenario is described in which late-stage KREEP basalt magmas erupted violently enough to fragment and incorporate previously crystallized basalts and deposited pyroclastic material on the moon.

Basu, Abhijit↗
NASA NTRS1994

CET93 and CETPC: An interim updated version of the NASA Lewis computer program for calculating complex chemical equilibria with applications

The NASA Lewis chemical equilibrium program with applications continues to be improved and updated. The latest version is CET93. This code, with smaller arrays, has been compiled for use on an IBM or IBM-compatible personal computer and is called CETPC. This report is intended to be primarily a users manual for CET93 and CETPC. It does not repeat the more complete documentation of earlier reports on the equilibrium program. Most of the discussion covers input and output files, two new options (ONLY and comments), example problems, and implementation of CETPC.

Mcbride, Bonnie J.↗
NASA NTRS2003

Effect of Sizings on the Durability of High Temperature Polymer Composites

To increase performance and durability of high-temperature composite for potential rocket engine components, it is necessary to optimize wetting and interfacial bonding between high modulus carbon fibers and high-temperature polyimide resins. Sizing commercially supplied on most carbon fiber are not compatible with polyimides. In this study, the chemistry of sizing on two high modulus carbon fiber (M40J and M60J, Tiray) was characterized. A continuous desizling system that uses an environmentally friendly chemical-mechanical process was developed for tow level fiber. Composites were fabricated with fibers containing the manufacturer's sizing, desized, and further treated with a reactive finish. Results of room-temperature tests after thermal aging show that the reactive finish produces a higher strength and more durable interface compared to the manufacturer's sizing. When exposed to moisture blistering tests, however, the butter bonded composite displayed a tendency to delaminate, presumably due to trapping of volatiles.

Allred, Ronald E.↗
DOE OSTI2025

CO2 upgrading into bioproducts using a two-step abiotic–biotic system

The valorization of CO2 to chemicals beyond C1-2 products is receiving significant interest; however, the direct electrosynthesis of Cn molecules (n > 4) remains a challenge. Here, we present a two-step abiotic-biotic system for upgrading CO2 into the biopolymer, poly(3-hydroxybutyrate). In the electrolysis system, CO2 is converted into C2 oxygenates using a Cu-Ag tandem electrocatalyst. The electrolysis process generates a liquid stream containing ~ 200 mM acetate in a bio-compatible electrolyte. This electrosynthesized acetate is then fed to a bioreactor, where the substrate is upgraded by Cupriavidus necator to biopolymer with a maximum rate of 32 ± 3.5 mg L-1 h-1. We further demonstrate the purification of the resulting biopolymer into a powder. The high productivity of the abiotic-biotic system demonstrates its feasibility for sustainable chemical manufacturing.

CO2 upgrading↗
NASA NTRS1982

Long term compatibility of nitrogen tetroxide with metals - Results at the ten-year milestone

Analyses and results are reported of a test program to establish the effects of long-term (10 years or more) contact of materials with nitrogen textroxide MON-1 for the purpose of designing chemical propulsion system components which can be used for current as well as future planetary spacecraft. The test materials included aluminum alloy, corrosion-resistant steel, titanium alloy, and nickel. The weight and appearance of each specimen were observed, including the presence of deposits, etching, pitting, and cracking. Aluminum alloy and steel were rated satisfactory with minor reservations, titanium alloy was satisfactory, and nickel was unsatisfactory. Criteria for ratings are shown.

Moran, C. M.↗
DOE OSTI2023

Advancing radioactive material research method: the development of a novel in situ particle-attached microfluidic electrochemical cell

This study aims to develop a microgram-scale microfluidic electrochemical cell (E-cell) for investigating the redox behavior of uranium oxide (UO 2 ). The traditional bulk electrochemical methods may require shielded facilities to investigate the hazardous materials, e.g., spent nuclear fuel, due to high radiation levels. Microfluidic E-cells offer advantages such as reduced radiation exposure, control over fluid flow rates, and high-throughput capabilities. Methods: The design of the E-cell considers electrode morphology, adhesion to a thin membrane, electrode configuration, and vacuum compatibility. Three techniques, including FIB-SEM lift-out, Au coating, and polyvinylidene fluoride (PVDF) binder, are explored for fabricating and attaching microgram quantities of UO 2 as working electrodes. The PVDF binder method proves to be the most effective, enabling the creation of a vacuum-compatible microfluidic E-cell. Results and discussion: The PVDF binder method demonstrates successful electrochemical responses and allows for real-time monitoring of UO 2 electrode behavior at the microscale. It offers chemical imaging capabilities using in situ SEM/EDS analysis. The technique provides consistent redox outcomes similar to bulk electrochemical analysis. Conclusion: The development of a microgram-scale microfluidic electrochemical cell using the PVDF binder technique enables the investigation of UO 2 redox behavior. It offers a low-risk approach with reduced radiation exposure and high-throughput capabilities. The technique provides real-time monitoring and chemical imaging capabilities, making it valuable for studying spent nuclear fuel systems and material characterization.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1995

Vertical structure of the midlatitude temperature from stratosphere to mesopause (30 - 105 km)

Data sets from Rayleigh lidar (1979-93) at the Observatory of Haute-Provence (44 deg N, 6 deg E) and at Biscarrosse (44 deg N, 1 deg W) of southern France, and from narrowband Na lidar (1991-4) at Fort Collins, Colorado (41 deg N, 105 deg W) are used to deduce the vertical temperature structure of the midlatitude middle atmosphere from 30 - 105 km. Nightly averaged temperatures measured across the Atlantic at comparable latitudes between 81 and 90 km showed seasonal variations tracking one another. Harmonic analyses of the measured profiles at these sites have been compared to the reference atmosphere, CIRA 1986. Considerable differences are noted in the annual mean temperautres in the mesopause region. Two temperature minima at 86 and 99 m are observed, suggesting heating and cooling mechnanisms not previously incorporated into the reference atmosphere. Using the new 3D TIME-General Circulation Model (GCM) of Roble and Ridley which includes both dynamical and chemical processes, we account for this anomalous behavior by model simulation for the first time. Except the existence of strong semi-annual oscillations, the observed annual and semi-annual temperature variations are compatible with CIRA 1986. Observed annual temperature and solar flux forcing are out-of-phase between 65 and 99 km, reflecting dynamics dominated atmosphere at these altitudes.

She, C. Y.↗
NASA NTRS2020

ExCALiBR: An Instrument for Uncovering the Origin of the Moon’s Organics.

Lipids are organic molecules of great astrobiological interest for future NASA missions to the Moon, Mars and Icy Worlds. Lipids are essential for life as we know it, and likely also required for putative extraterrestrial organisms. These robust organics can be synthesized abiotically and survive for long periods of geological time. Laboratory characterization techniques are well established but are laborious, operator dependent, and require large volumes of consumables, precluding in situ analysis. We are developing an autonomous, miniaturized fluidic system, integrating lab techniques for lipid analysis while minimizing rea-gent volumes and concentrating organics for analysis, thereby increasing signal-to-noise ratios by orders of magnitude. This system, the Extractor for Chemical Analysis of Lipid Biomarkers in Regolith (ExCALiBR), will enable future organic surveys by extracting and concentrating lipids from approximately 50 grams of regolith using a fluidic and microfluidic sample processor made of materials compatible with non-aqueous solvents required for extraction. ExCAL-iBR can be deployed on a lander or used on a crewed mission.

M B Wilhelm↗
DOE OSTI2020

An Adaptive-Mesh-Refinement Based Computational Tool for Simulating Catalysis at Mesoscale

In this work, we present a computational tool for mesoscale applications using open-source exascale- computing compatible adaptive-mesh-refinement (AMR) library, AMReX [2]. AMReX is software library that enables development of application solvers with block-structured Cartesian AMR. Our tool has capabilities to include realistic geometry representation, chemical species transport, reactions and thermodynamics that are critical for capturing mesoscale physics. A significant achievement is the ability of our solver to automatically import electron microscopy data in the form of a stereolithography (STL) or pixelated file format (mrc, tiff) without undergoing the tedious task of unstructured mesh generation. This feature allows for rapid simulation of catalyst particles with complex morphologies using an immersed-boundary formulation. The use of AMR allows for higher resolutions at catalyst surface interfaces, which in turn provides an accurate description of surface reactions and transport. Our solver uses a hybrid distributed and shared memory parallelism (OpenMP/GPU-based) with which strong scaling up to 10,000 processors for realistic catalyst particle simulations have been demonstrated.

BIOMASS FUELS,MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Final Report for Electro-oxidative valorization of biomass: design strategies for selective and stable catalysis

This project aimed to develop a fundamental understanding of the factors that dictate activity and selectivity during electrochemical partial oxidation of multi-carbon organic molecules derived from biomass. Value-adding selective conversions of alcohols to aldehydes, and aldehydes to carboxylic acids were considered, with the ultimate goal to establish general principles for controlling selectivity in organic oxidations. Specific aims involved the use of furfural (FF) and 5-hydoxymethyfurfural (HMF) as model systems and seek to develop knowledge for control of mechanisms that permit selective conversions between oxygenate functional groups with prevention or control of C-C cleavage steps. Another major focus of the work was in achieving these transformations in acidic conditions, which contrasts most existing work (done in base), but is crucial toward compatibility with common pretreatments used to generate small molecules from lignocellulose (e.g. acid hydrolysis or pyrolysis). The work involved well-defined catalyst material synthesis, comparative kinetics, and operando spectroscopies (PI Holewinski), supported by quantum chemical simulations (PI Janik), enabling progress toward efficient, acid-stable oxidation catalysis for biomass upgrading.

Holewinski, Adam [University of Colorado Boulder] ↗
NASA NTRS1971

Digital magnetic temperature transducer.

A new digital magnetic temperature transducer is reported. The device utilizes the discontinuous behavior of the initial permeability with temperature at the Curie temperature of some magnetic materials. Since the Curie temperature is determined by the chemical and crystallographic composition of the particular material only, the transducer requires no calibration and has extremely high stability and reproducibility with time. The output of the transducer is inherently digital and, therefore, is directly compatible with the digital information processing and control without A/D conversion. The temperature-sensing portion of the transducer consists only of magnetic cores and wire and, therefore, has extremely high reliability, is shock and radiation insensitive, small, and virtually indestructible.

Tchernev, D. I.↗
DOE OSTI2023

GRAPHITE–MOLTEN SALT CONSIDERATIONS FOR COMPONENTS IN NUCLEAR APPLICATIONS

The new High Temperature Reactor (HTR) designs being considered for future Gen IV nuclear reactor deployment include designs utilizing molten salt as the primary coolant. These molten-salt cooled, graphite core designs pose new material compatibility challenges that are not considered within the gas-cooled HTR designs that have been previously built and operated. While the Molten Salt Reactor Experiment (MSRE) demonstrated that the molten salt can be considered chemically inert to graphite the novel physical and thermal interactions that the molten salt poses may be just as impactful as the chemical reactivity. Specifically, molten salt intrusion into the open pore structure of nuclear graphite grades can provide additional internal stresses within the microstructure exacerbating the stress buildup from irradiation induced dimensional change. Additionally, designs using a molten salt containing liquid fuel could provide “hot spots” within graphite structural components causing local thermal stresses. Abrasion and erosion concerns are magnified with molten salt due to the extremely high density of the salts (some have higher densities than the structural graphite components). Finally, the graphite-graphite and fuel pebble-graphite tribological behavior are distinctly difference within the molten salt from the inert gas environments and must be investigated. These topics and others are currently under investigation within the DOE Advanced Reactor Technologies (ART) graphite program and will be discussed in depth.

Gallego, Nidia↗
DOE OSTI2022

Markovnikov alcohols via epoxide hydroboration by molecular alkali metal catalysts

Synthesis of branched “Markovnikov” alcohols is crucial to various chemical industries. The catalytic reduction of substituted epoxides under mild conditions is a highly attractive method for preparing such alcohols. Classical methods based on heterogeneous or homogeneous transition metal-catalyzed hydrogenation, hydroboration, or hydrosilylation usually suffer from poor selectivity, reverse regioselectivity, limited functional group compatibility, high cost, and/or low availability of the catalysts. Here we report the discovery of highly regioselective hydroboration of nonsymmetrical epoxides catalyzed by ligated archetypal reductants in organic chemistry – alkali metal triethylborohydrides. The chemoselectivity and turnover efficiencies of the present catalytic approach are excellent. Thus, terminal and internal epoxides with ene, yne, aryl, and halo groups were selectively and quantitatively reduced under a substrate-to-catalyst ratio (S/C) of up to 1000. Mechanistic investigations point to a mechanism reminiscent of frustrated Lewis pair action on substrates in which a nucleophile and Lewis acid act cooperatively on the substrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗