Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Charging Behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

ATEAM4Py: An Efficient and Scalable Python-Based Model for Charging Demand

This report details the development and implementation of ATEAM4Py, a Python-based simulation model that projects demand for battery electric vehicle (BEV) charging based on adoption trends and consumer behavior. With Exelon’s support, Argonne National Laboratory converted the original Java-based Agent-based Transportation Energy Analysis Model (ATEAM) into Python, resulting in a faster and more efficient tool for forecasting the timing, location, and scale of charging demand growth. ATEAM4Py tackles key challenges in simulation efficiency and runtime, supporting the strategic development of cost-effective grid capacity expansion strategies and ensuring reliable service for stakeholders.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2026

Reducing Internal Resistance in Activated Carbon Supercapacitors via Exfoliated Coal-Derived Graphene Additive

Low equivalent series resistance (ESR) is critical for high-rate energy storage devices (e.g., supercapacitors), and graphene is a promising additive for reducing ESR in carbon-based supercapacitor electrodes. However, graphene can be costly and difficult to produce at scale. This study investigates the addition of graphene, produced through electrochemical exfoliation of domestic coal-derived graphite, in activated carbon-based supercapacitors. The coal-derived graphene was incorporated at varying weight loadings and tested in symmetric supercapacitors with aqueous electrolytes. ESR was evaluated using both direct current internal resistance (DCIR) and electrochemical impedance spectroscopy (EIS) measurements. DCIR measurements revealed ESR reductions of ∼34%, ∼18%, and ∼21% at 3, 5, and 10 wt % loadings, respectively, compared to the baseline (0 wt %) of ∼0.54 Ω. These results were further confirmed by EIS measurements. Correspondingly, power density increased by ∼52%, ∼27%, and ∼35% at 3, 5, and 10 wt % loadings relative to the baseline (∼29 kW/kg). Additionally, the electrodes exhibited moderate increases in specific capacitance and energy density, along with stable cycling performance (capacitance retention above 85% after 100,000 cycles) and capacitive behavior (α = 0.95−0.97), suggesting favorable charge transfer kinetics. These findings highlight the potential of exfoliated coal-derived graphene as an effective additive for supercapacitor electrodes.

capacitors↗
DOE OSTI2026

Atomistic Mechanisms of Stress-Dependent Molten Salt Corrosion in NiCr Alloys

Ni-based structural alloys in molten salt environments often experience simultaneous mechanical loading and corrosive attack, yet the mechanisms governing stress-corrosion interactions remain unclear. Prior studies largely emphasize tensile stress, while the role of compressive stress has received limited attention. Here, reactive molecular dynamics simulations are used to investigate the coupled effects of applied strain and corrosion in Ni 0.75 Cr 0.25 exposed to molten FLiNaK at 800 °C. A Σ5(210) grain boundary model is subjected to tensile (+4%) to compressive (−4%) uniaxial strains, and corrosion behavior is evaluated through fluorine adsorption, charge redistribution, and grain boundary evolution. Tensile strain accelerates intergranular corrosion susceptibility by reducing local atomic packing through elastic dilation and increasing excess free volume at the grain boundary, which enhances atomic mobility and salt infiltration. In contrast, compressive strain can suppress corrosion by promoting the formation of a ridge-like surface layer along the grain boundary, limiting salt access to the underlying alloy. These results provide atomistic insight into how stress states influence grain boundary corrosion in molten salts.

36 - MATERIALS SCIENCE↗
DOE OSTI2026

Collapse of Jahn-Teller phonons in La 1−x Sr x MnO 3 with weak magnetoresistance

Perovskite manganites are quantum materials exhibiting competing interactions inducing colossal magnetoresistance (CMR). The prevailing theory of CMR highlights the essential role of electron-phonon coupling (EPC), but mounting evidence suggests the underlying mechanism is more complicated. Here, we investigate phonons and spin-phonon coupling in ferromagnetic CMR manganites La 1−x Sr x MnO 3 (x=0.2,0.3) with relatively small CMR associated with melting of the magnetic order above room temperature. High-resolution neutron scattering experiments combined with density functional theory (DFT) show that the low-temperature ferromagnetic phase is conventional: neutron scattering from phonons agrees with DFT predictions and magnons follow sinusoidal dispersions. Fluctuating magnetic moments and low-energy phonons remain conventional in the high-temperature paramagnetic phase, indicating the Mn and La/Sr sublattices are not strongly perturbed by melting of ferromagnetism. In contrast, the Jahn–Teller-active optical oxygen vibrations collapse entirely above the Curie temperature, despite low CMR in these compositions, with some of the lost spectral weight reappearing as quasielastic scattering. We attribute this highly anomalous behavior to giant EPC in the charge and/or orbital channel. It drives cooperative diffusive motion of quasistatic carrier-trapping oxygen sublattice distortions once ferromagnetism disappears. We hypothesize the magnitude of magnetoresistance correlates with the rate of diffusion rather than with the strength of Jahn–Teller EPC.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Resolving buried optoelectronic features in metal halide perovskites via modulation spectroscopy studies

As research on both bulk and low dimensional metal halide perovskites (MHPs) continues to grow, the tools necessary to gain insights into their exotic and highly convoluted optoelectronic features must also expand. Electroabsorption (EA) is a modulation spectroscopy technique that is exceptionally valuable at deconvoluting overlapping spectral features as well as discerning between different electronic environments in semiconductors. This review outlines the critical shortcomings of traditional optical spectroscopy in determining essential properties such as the bandgap and exciton binding energy. In this report we provide a brief overview of the working principles of EA, focusing on the differences between bound and unbound charge carriers that result in unique behavior when interacting with an applied electric field. We discuss key studies highlighting the unique characterization available when coupling EA spectroscopy with traditional steady-state optical tools to investigate interesting and complex optical features in MHPs. We conclude that EA is a crucial tool for pushing the boundaries of our understanding of the optoelectronic properties of MHP thin films. When other optical characterization methods fall short in the richness of data provided, EA can bridge the knowledge gap to provide a complete optoelectronic characterization of novel MHPs and deepen the understanding of current structures and compositions as a function of their structural and morphological dimensionality.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Universal signatures of Dirac fermions in entanglement and charge fluctuations

We study the entanglement entropy (EE) and charge fluctuations in models where the low-energy physics is governed by massless Dirac fermions. We focus on the response to flux insertion which, for the EE, is widely assumed to be universal, i.e., independent of the microscopic details. We provide an analytical derivation of the EE and charge fluctuations for the seminal example of graphene, using the dimensional reduction of its tight-binding model to the one-dimensional Su-Schrieffer-Heeger model. Our asymptotic expression for the EE matches the conformal field theory prediction. We show that the charge variance has the same asymptotic behavior, up to a constant prefactor. To check the validity of universality arguments, we numerically consider several models, with different geometries and numbers of Dirac cones, and either for strictly two-dimensional models or for a gapless surface mode of three-dimensional topological insulators. We also show that the flux response does not depend on the entangling surface geometry as long as it encloses the flux. Finally we consider the universal corner contributions to the EE. We show that in the presence of corners, the Kitaev-Preskill subtraction scheme provides nonuniversal, geometry-dependent results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

EV Load Forecasting Guide: A Report by the Energy Systems Integration Group’s EV Load Forecasting Task Force

Forecasting electricity usage is a foundational planning activity for utilities, underpinning billions of dollars in grid investments that ensure system reliability. Historically, forecasting relied on trends in economic and population growth; however, transportation electrification presents a new and complex planning challenge. Unlike conventional loads, electric vehicle (EV) charging has relatively limited usage history. In addition, charging is driven by complex human behaviors, is mobile, and at the same time can concentrate geographically in ways that, without proper planning, can quickly overwhelm local distribution systems.

Giraldez, Julieta [Electric Power Engineers, Austi↗
DOE OSTI2024

Problem-tailored Simulation of Energy Transport on Noisy Quantum Computers

The transport of conserved quantities like spin and charge is fundamental to characterizing the behavior of quantum many-body systems. Numerically simulating such dynamics is generically challenging, which motivates the consideration of quantum computing strategies. However, the relatively high gate errors and limited coherence times of today's quantum computers pose their own challenge, highlighting the need to be frugal with quantum resources. In this work we report simulations on quantum hardware of infinite-temperature energy transport in the mixed-field Ising chain, a paradigmatic many-body system that can exhibit a range of transport behaviors at intermediate times. We consider a chain with L = 12 sites and find results broadly consistent with those from ideal circuit simulators over 90 Trotter steps, containing up to 990 entangling gates. To obtain these results, we use two key problem-tailored insights. First, we identify a convenient basis – the Pauli Y basis – in which to sample the infinite-temperature trace and provide theoretical and numerical justifications for its efficiency relative to, e.g., the computational basis. Second, in addition to a variety of problem-agnostic error mitigation strategies, we employ a renormalization strategy that compensates for global nonconservation of energy due to device noise. We discuss the applicability of the proposed sampling approach beyond the mixed-field Ising chain and formulate a variational method to search for a sampling basis with small sample-to-sample fluctuations for an arbitrary Hamiltonian. This opens the door to applying these techniques in more general models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1990

Charged polymers in high dimensions

A Monte Carlo study of charged polymers with either homogeneously distributed frozen charges or with mobile charges has been performed in four and five space dimensions. The results are consistent with the renormalization-group predictions and contradict the predictions of Flory-type theory. Introduction of charge mobility does not modify the behavior of the polymers.

Kantor, Yacov↗
NASA NTRS1990

Cleft contribution to ring current formation

The storm time transport of ionospheric plasma from the 'cleft fountain' to the plasma sheet and ring current is investigated by means of three-dimensional trajectory codes. Using observations to define the source location and flow rate, test particles are traced during a 'taillike' to 'dipolelike' reconfiguration of the geomagnetic field. Emphasis is placed on the behavior of heavy ions of low charge state, O(+). As a result of their long periods of gyration, these ions are highly sensitive to rapid field variations and possibly display transient nonadiabatic motions. It is demonstrated that O(+) which have originated in the high-latitude ionosphere but which find themselves in the vicinity of the equator at substorm onset can experience considerable energization (from several keV up to several hundred keV) and pitch angle increase leading to trapping, as an effect of the induced electric field.

Delcourt, D. C.↗
NASA NTRS1993

Solar wind-induced secondary ions and their relation to lunar surface composition

Based on previous laboratory experiments simulating solar wind sputtering of lunar surface materials, it appears that solar wind ions sputter secondary ions in sufficient numbers to be measured from low-altitude lunar orbit. Solar wind protons are hundreds of times less efficient than those used in standard secondary ion mass spectrometry; nevertheless secondary ions of Na, Mg, Al, Si, K, Ca, Mn, Ti and Fe were observed sputtered from sample simulants of mare and highland soils. These secondary ion fluxes depend both on concentration in the soil and on probability of ionization; yields of easily ionized elements such as K and Na are relatively much greater than those for the more electronegative elements and compounds. The principal geochemical indicator elements Na, Mg, Al, Si, K, Ca, Ti, Mn and Fe are nevertheless detectable. However, it has not been shown that the observed secondary ions vary strictly one-to-one with their concentrations in the geochemically distinct soil simulants used here. While we have a first order understanding of secondary ion sputtering, it is not clear that the observed ion yields can be linked with great accuracy to the simulant's composition. The simulants were analyzed by electron microprobe to establish their detailed composition. The observed secondary ion fluxes can then be compared with the microprobe results. For example Ti(+) fluxes from the three simulants correspond to the true composition with accuracies of better than 10 percent for the high-Ti basalt, and about 20 percent for the low-Ti simulant. The highlands simulant produced a statistically insignificant Ti(+) count rate. Here we discuss the results of further SIMS experiments using the ASU/Center for Solid State Science facility. With careful isolation and preparation of samples, we avoid the problems of the previous experiments. In particular, we will make use of ground-up sample to mimic the sputtering behavior of regolith, and will avoid charging by placing the soil on a conducting indium substrate. We report the results of a blind test of the SIMS technique using a sample of unknown composition.

Elphic, R. C.↗
NASA NTRS2022

Preferential Acceleration of Heavy Ions in a Spontaneously Fragmenting Flare Current Sheet

We study the ion acceleration in a mesoscale, spontaneously fragmenting flare current sheet (SFCS) characterized by the presence of a plasmoid cascade. The main subject of our investigation is to determine whether and how plasmoid cascades at intermediate scales in a fragmented current sheet of a solar flare can impact the (preferential) acceleration of specific ions. The time evolution of the SFCS is obtained from high-resolution 2.5D MHD simulations. The ion trajectories (in the background fields resulting from the MHD model), energies, and pitch angles are calculated using a relativistic test-particle code based on the half-acceleration–rotation–half-acceleration method. For light ions, the main acceleration effects of electromagnetic fields within the SFCS are analyzed using the guiding center approximation. We identify regions with the most-efficient ion acceleration within the SFCS, the accelerator efficiency, and spectra of the accelerated ions. The influence of the charge-to-mass ratio on ion behavior is also studied and resulting ion abundances are compared with observational data. The main ion acceleration takes place in the regions with a strong polarization term, which is part of the first-order Fermi acceleration. Because the term is mass dependent, heavier ions undergo preferential acceleration. The ion energy spectra, abundance-enhancement factors, and differential fluxes, obtained from the model, exhibit power-law profiles, in agreement with observed solar energetic particle events. Nonetheless, the obtained slopes for the abundance-enhancement factor do not exactly match the observed data. The computed slopes and profiles are not sensitive to changes in the initial plasma temperature.

David Kramoliš↗
DOE OSTI2022

Probabilistic Modeling of Commercial Building Occupancy Patterns Using Location-Based Map Data: Preprint

Considering occupancy patterns is crucial to simulate buildings' energy use. Current energy models use inputs that simplify the actual diversity in occupancy into static occupancy patterns and are not able to represent the numerous variations in occupancy patterns between buildings and across different locations. Recently, inferring occupancy schedules from metered electricity consumption data was used to model occupancy in commercial buildings. However, the translation from metered data to occupancy schedules requires many assumptions that might not capture the reality, and the process is hindered by the availability of data from advanced metering infrastructure. With the development of information technologies, occupancy modeling should not be limited to traditional approaches. The prevalence of social networks and location services with real-time user feedback provides publicly accessible data via Maps Application Programming Interfaces (APIs) such as Google Maps, SafeGraph, Mapbox, Foursquare, etc. This paper presents an automated framework for modeling parametric occupancy patterns using such APIs to calibrate commercial district buildings' energy models. This process includes three main steps: data extraction and processing, parametric schedules generation, and schedules integration. We demonstrated this framework in districts where we used maps API to generate more accurate behavioral patterns for operations and electric vehicle charging events. We used these patterns to determine differences in energy use across key sociodemographic and spatial parameters. The presented method has the potential for worldwide applications. Users can utilize this framework to extract data for selected locations of interest to create more realistic behavioral patterns for commercial facilities across different districts.

building energy modeling↗
DOE OSTI2020

Pascal conductance series in ballistic one-dimensional LaAlO 3 /SrTiO 3 channels

One-dimensional electronic systems can support exotic collective phases because of the enhanced role of electron correlations. We describe the experimental observation of a series of quantized conductance steps within strongly interacting electron waveguides formed at the lanthanum aluminate–strontium titanate (LaAlO 3 /SrTiO 3 ) interface. The waveguide conductance follows a characteristic sequence within Pascal’s triangle: (1, 3, 6, 10, 15, …) e 2 /h , where e is the electron charge and h is the Planck constant. This behavior is consistent with the existence of a family of degenerate quantum liquids formed from bound states of n = 2, 3, 4, … electrons. Our experimental setup could provide a setting for solid-state analogs of a wide range of composite fermionic phases.

Science & Technology - Other Topics↗
DOE OSTI2021

Low barrier height in a ZnO nanorods/NbSe 2 heterostructure prepared by van der Waals epitaxy

Two-dimensional (2D) materials as contacts for semiconductor devices have attracted much attention due to minimizing Fermi level pinning. Schottky–Mott physics has been widely employed to design 2D material-based electrodes and to elucidate their contact behavior. In this study, we revealed that charge transfer across a 2D/semiconductor heterointerface and materials characteristics besides work function should be accounted for in fabrication of electrodes based on 2D materials. Our density functional theory (DFT) calculations predicted that charge transfer between ZnO and NbSe 2 lowers the barrier height at the heterojunction and that conductive surface states of ZnO provide an additional conduction channel in the ZnO/NbSe 2 heterostructures. Crystalline ZnO/NbSe 2 heterostructures were prepared by the hydrothermal method. Electrical characterizations of the ZnO/NbSe 2 heterostructures showed Ohmic-like behavior as predicted by the DFT calculations, opposed to the prediction based on the Schottky–Mott model.

2D materials↗
DOE OSTI2026

Energy performance augmentation of domestic refrigerators with microchannel condensers

Refrigerators are one of the most extensively used household appliances, accounting for approximately 4% of total household electricity consumption. Enhancing their energy performance can significantly reduce residential energy demand. As a result, this study focuses on reducing the energy consumption of a French-door, bottom-mount refrigerator using isobutane (R600a) as the working fluid. Here, the performance improvement of the refrigerators has been obtained mainly through improving the vapor compression refrigeration cycle, with a particular emphasis on condenser design. This study explores the impact of three-pass serpentine microchannel condenser on energy performance, along with the effects of two distinct fan combinations. Charge optimization experiments were conducted to identify the optimal refrigerant mass for the refrigerator unit with microchannel condenser. Additionally, a comprehensive numerical model was developed to analyze the behavior of vapor compression cycle under various refrigerant charges. The experimental findings revealed that the refrigerator unit with the three-pass microchannel condenser reduces the energy consumption of isobutane-based domestic refrigerators up to 16% while reducing the refrigerant charge by 11% in comparison to the refrigerator unit with conventional wire-and-tube condenser.

Charge optimization↗
DOE OSTI2020

Effect of lithium incorporation on tweaking the electrocatalytic behavior of tantalum-based oxides

To study the effect of lithium incorporation on the electrochemical properties and catalytic behavior of tantalum-based oxides, a series of mesoporous lithium-contained tantalum oxides was developed adopting an inverse micelle-based sol gel synthesis method. Four various phases of amorphous Ta 2 O 5 , polycrystalline LiTaO 3 , Li 5.04 Ta 6.16 O 17.92 , and Li 3 TaO 4 were determined for samples synthesized at Li/Ta ratios of 0.5 (LTO-0.5), 1 (LTO-1), 2 (LTO-2), and 3 (LTO-3) respectively. The surface analysis revealed that LTO-2 sample is featured with lower amount of lithium atoms at the surface rather than the bulk of the sample. The electrochemical analysis of LTO samples showed that LTO-2 possesses lower charge transfer resistance extracted from impedance spectroscopy that consequently leads to a better electrocatalytic performance. The LTO-2 electrode also showed a low open circuit potential (OCP) combined with a relatively higher electroactive surface area, thus capable of running an electrooxidation reaction at a potential lower than all other LTO samples. The more negative OCP value of LTO-2 electrode in AA solution states a more facile electron transfer between the analyte and electrode compared to other synthesized samples. Mott–Schottky plots of LTO electrodes are characterized by positive slopes which indicate n-type semiconductor behavior. The charge carrier density (5.5 × 10 19 cm -3 ) in LTO-2 sample is the lowest among all other samples. The charge carrier density is dependent on the amount of applied lithium in the synthesis confirming various lithium diffusion behaviors in LTO samples. The lower carrier concentration in LTO-2 justifies its higher activity in electrooxidation providing less populated lower unoccupied molecular orbital (LUMO) for the accommodation of electrons extracted from the analyte higher occupied molecular orbital (HOMO). Therefore, LTO-2 showed an improved electrocatalytic performance due to lower charge transfer resistance (higher conductivity) offered by lower amount of lithium atom at its surface and higher oxygen vacancies in the bulk.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗