Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COPRECIPITATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Microstructure control on thermoelectric properties of Ca{sub 0.96}Sm{sub 0.04}MnO{sub 3} synthesised by co-precipitation technique

Nanopowder of Ca{sub 0.96}Sm{sub 0.04}MnO{sub 3} (CSM) perovskite was prepared by chemical co-precipitation technique. It was characterized and studied by X-ray diffraction and Transmission Electron Microscopy. Nano-crystalline CSM phase having grain size of 60-70 nm can be prepared by calcination at 1073 K for 6 h in air. The obtained nanopowder was pressed, sintered at 1373 K for 24 h to obtain a dense sample. In comparison, CSM samples prepared from normal powder need sintering temperature of 1623 K to reach a similar microstructure, showing the efficiency of nanopowder to decrease the sintering temperature. The thermoelectric properties of samples prepared with two different processes were studied. The Seebeck coefficient and the thermal conductivity slightly decrease by using the nanopowder while the value of the electrical resistivity does not change. This results in the same figures of merit for the two materials.

36 MATERIALS SCIENCE↗

Application of nanostructured Ca doped CeO{sub 2} for ultraviolet filtration

Calcium doped CeO{sub 2} nanoparticles with doping concentrations between 0 and 50 mol% were synthesized by a co-precipitation method for ultraviolet filtration application. Below 20 mol% doping concentration, the samples were single-phase. From 30 mol%, CaCO{sub 3} appears as a secondary phase. The calculated CeO{sub 2} mean crystallite size was 9.3 nm for the pure and 5.7 nm for the 50 mol% Ca-doped sample. Between 250 and 330 nm, the absorbance increased for the 10, 30, and 40 mol% Ca-doped samples compared to the pure one. The band-gap was found to be 3.20 eV for the undoped, and between 3.36 and 3.51 eV for the doped samples. The blue shifts are attributed to the quantum confinement effect. X-ray photoelectron spectroscopy showed that the Ce{sup 3+} atomic concentration in the pure sample was higher than that of the 20 mol% Ca-doped sample.

36 MATERIALS SCIENCE↗

Structural and optical studies of yttrium oxide nanoparticles synthesized by co-precipitation method

Yttrium oxide (yttria) nanoparticles were successfully synthesized by co-precipitation method. As-synthesized and annealed powders were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), UV-visible (UV-vis), photoluminescence (PL) spectra and Fourier transform infrared spectrometer (FTIR). The XRD results show that the as-prepared sample has mixed phase of Y(OH){sub 3} and yttria (Y{sub 2}O{sub 3}). However, cubic yttrium oxide phase alone is found for annealed samples. The strain values are calculated from Williamson-Hall (W-H) plot for annealed samples. SEM and TEM micrographs show that the samples are composed of aggregated nanoparticles with different shapes and sizes. From the UV-vis spectra, it is found that the position of the absorption peak is shifted towards the lower wavelength side when particle size decreases. In the PL spectra, the broad emission bands are observed between 340 and 380 nm and the presence of metal oxide is confirmed by FTIR spectra.

36 MATERIALS SCIENCE↗

Moessbauer and magnetic study of Mn, Zr and Cd substituted W-type hexaferrites prepared by co-precipitation

Highlights: {yields} Zr and Cd ions substitute tetrahedral 4e and 4f{sub IV} sites while Mn ions occupy octahedral 6g and 4f sites. {yields} Doping of W-type hexaferrites with Mn, Zr and Cd improves the values of M{sub s} and M{sub r}. {yields} The enhancement of magnetic characteristic togetherwith the formation of rice shaped W-type hexaferrites nanoparticles is promising for imaging and sensing devices. {yields} The synthesized materials are suitable for magnetic data storage with high density. -- Abstract: BaCo{sub 2-x}Mn{sub x}Fe{sub 16-2y}(Zr-Cd){sub y}O{sub 27} (x = 0-0.5 and y = 0-1.0) hexaferrite nanocrystallites of average sizes in the range of 33-42 nm are synthesized by the chemical co-precipitation method. The synthesized materials are characterized using different techniques including X-ray diffraction (XRD), energy dispersive X-ray florescence (ED-XRF), scanning electron microscope (SEM), Moessbauer spectrometer and vibrating-sample magnetometer (VSM). Based on analysis of the data obtained from Moessbauer spectral studies, doping is believed to have occurred preferably in the vicinity of 12k sub-lattice, i.e. f{sub IV} (4e, 4f{sub IV}), 2b (6g, 4f) and 2d site. Variations in the saturation magnetization (77.1-60.9 emu g{sup -1}), remanent magnetization (22.08-31.23 emu g{sup -1}) and coercivity (1570.1-674.7 Oe) exhibit tunable behavior with dopant content and therefore can be useful for application in various magnetic devices.

36 MATERIALS SCIENCE↗

Microstructural, electrical and optical properties of indium tin oxide (ITO) nanoparticles synthesized by co-precipitation method

Highlights: Black-Right-Pointing-Pointer The grain size of the ITO is decreased from 28.7 to 9.0 nm by increasing Sn dopant. Black-Right-Pointing-Pointer The strain values increased with the incorporation of Sn in In{sub 2}O{sub 3} host lattice. Black-Right-Pointing-Pointer The lower resistivity of 4.9 {Omega} cm is obtained for 10 at.% Sn doped ITO. Black-Right-Pointing-Pointer The band gap varies from 3.62 to 3.89 eV with dopant concentration of Sn. -- Abstract: In the present study, the synthesis of Tin doped indium oxide (ITO) nanopowder at different compositions (In/Sn = 0, 5, 10, 15 at %) was carried out by co-precipitation method. The decomposition of precipitated indium tin acetylacetonate precursor to form In{sub 2}O{sub 3}-SnO{sub 2} (Sn{sub 1-x}In{sub x}O{sub 2}) at 400 Degree-Sign C was confirmed by the thermal and FTIR studies. The changes in strain and grain size of the synthesized particle with respect to dopant concentration were determined from the X-ray diffraction (XRD) analysis. Transmission electron microscopy (TEM) images support to confirm the grain size. The optical properties on ITO nanoparticles were analyzed with UV-visible spectroscopy, and band gap was found to vary from 3.62 to 3.89 eV with Sn dopant concentration. This variation was ascribed to the quantum confinement effect.

36 MATERIALS SCIENCE↗

Nanosized pure and Cr doped Al{sub 2−x}Sc{sub x}(WO{sub 4}){sub 3} solid solutions

Highlights: ► Nanosized pure and Cr-doped Al{sub 2−x}Sc{sub x}(WO{sub 4}){sub 3} obtained for a first time. ► Material for ceramics with different application. ► Co-precipitation method for preparation. ► X-ray, DTA, TEM investigations. ► Co-precipitation method gives 10–70 nm particles. -- Abstract: Nanosized solid solutions of the formula Al{sub 2−x−y}Sc{sub x}Cr{sub y}(WO{sub 4}){sub 3}, where x varies from 0 to 2 and y from 0.02 to 0.1 are synthesized for the first time by the co-precipitation method. X-ray powder diffraction, DTA/TG and TEM analyses demonstrate that the powders are pure solid solution compounds with orthorhombic structure, space group Pnca. Particle sizes between 10 and 70 nm are obtained after thermal treatment of the precipitates at 550 °C for 1 h for all compositions except in the case of Sc{sub 1.9}Cr{sub 0.1}(WO{sub 4}){sub 3}. For the last one mean particle size of 64 nm was obtained after thermal treatment at 500 °C. The influence of the concentrations of Sc and Cr as well as of the temperature and duration of the thermal treatment on the particle size and size distribution are established and discussed.

36 MATERIALS SCIENCE↗

Effects of excitation wavelength and Y{sup 3+} content on luminescent properties of YMO{sub 4}:Dy{sup 3+} (M = V, P) phosphors induced by ultraviolet excitation

Highlights: ► The color temperature of YPO{sub 4}:Dy{sup 3+} phosphor can be controlled by changing excitation wavelength. ► Y{sub x}VO{sub 4}:Dy{sup 3+} phosphors were synthesized by chemical precipitation method. ► Little excessive Y{sup 3+} content can make body color of YVO{sub 4}:Dy{sup 3+} phosphor become white even if sintered above 1100 °C. -- Abstract: Y{sub 0.99}VO{sub 4}:0.01Dy{sup 3+}, Y{sub 0.99}PO{sub 4}:0.01Dy{sup 3+} and Y{sub x}VO{sub 4}:0.01Dy{sup 3+} phosphors were synthesized by chemical co-precipitation method. All the samples were characterized by X-ray powder diffraction (XRD) and photoluminescence spectroscopy. XRD results show that the samples only have single tetragonal structure and the crystallinity of Y{sub 0.99}VO{sub 4}:0.01Dy{sup 3+} phosphor is higher than that of Y{sub 0.99}PO{sub 4}:0.01Dy{sup 3+} phosphor when the heat treatment process is same. Photoluminescence excitation spectra results show that the Y{sub 0.99}VO{sub 4}:0.01Dy{sup 3+} and Y{sub 0.99}PO{sub 4}:0.01Dy{sup 3+} phosphors can be efficiently excited by ultraviolet light from 250 nm to 380 nm, the former have a wide Dy{sup 3+}–O{sup 2−} charge transfer band ranging from 260 nm to 350 nm including a peak at 310 nm, the latter have four peaks at 294 nm, 326 nm, 352 nm and 365 nm. Emission spectra of all the samples exhibit a strong blue emission (483 nm) and another strong yellow emission (574 nm). Moreover, the yellow-to-blue emission intensity ratio and color temperature of emission of Dy{sup 3+} are strongly related to excitation wavelength in Y{sub 0.99}PO{sub 4}:0.01Dy{sup 3+} phosphor, but it is almost not in Y{sub 0.99}VO{sub 4}:0.01Dy{sup 3+} phosphor. For Y{sub x}VO{sub 4}:0.01Dy{sup 3+} (x = 0.94, 0.97, 0.99, 1.01, 1.03) phosphors, with increasing value of x, the body color of phosphor changes from yellow to white and the strongest peak in excitation spectra shifts a little to shorter wavelength. It is detrimental to luminous intensity when Y{sup 3+} content deviate stoichiometric ratio, but the influence of Y{sup 3+} on the color temperature of emission of YVO{sub 4}:Dy{sup 3+} phosphor is slight.

36 MATERIALS SCIENCE↗

Co-precipitation of yttrium and barium fluorides from aqueous solutions

Highlights: ► BaF{sub 2}–YF{sub 3} system has been studied under the non-equilibrium ambient conditions. ► Ba{sub 1−x}Y{sub x}F{sub 2+x} (x = 0.35–0.75) solid solution phase has cubic fluorite-type structure. ► Ba{sub 1−x}Y{sub x}F{sub 2+x} cubic crystal lattice parameter a{sub 0} does not change monotonously. ► Different types of lattice defects determine a dependency from sample composition. ► (H{sub 3}O{sup +})Y{sub 3}F{sub 10}{sup −}·nH{sub 2}O phase precipitates from HF aqueous solutions instead of YF{sub 3}·nH{sub 2}O. -- Abstract: Co-precipitation of barium and yttrium fluorides from aqueous solutions at room temperature produced non-equilibrium Ba{sub 1−x}Y{sub x}F{sub 2+x} nanofluoride phase with face-centered cubic crystal lattice of fluorite-type with the composition interval of the homogeneity for x = 0.35–0.75. Lattice parameter a of this solid solution nanophase varied as a function of the sample chemical composition in a complex manner with two areas of linear dependency, from x = 0.35 to 0.45 and from x = 0.50 to 0.75. A plausible explanation of this phenomenon included a change of the type of crystal lattice defects and the manner of their population with the corresponding ions. An increase of the relative amount of yttrium in the HF reaction system led to the formation of hydroxonium salt of decafluorotriyttrium acid, (H{sub 3}O{sup +})Y{sub 3}F{sub 10}{sup −}·nH{sub 2}O, instead of expected YF{sub 3} hydrate. No formation of oxyfluoride phases under acidic conditions has been observed.

36 MATERIALS SCIENCE↗

X-ray absorption spectroscopy studies of the Ni ion of Li(Ni{sub 0.8}Co{sub 0.15}Al{sub 0.05}){sub 0.8}(Ni{sub 0.5}Mn{sub 0.5}){sub 0.2}O{sub 2} with a core–shell structure and LiNi{sub 0.8}Co{sub 0.15}Al{sub 0.05}O{sub 2} as cathode materials

Core–shell materials have attracted a great deal of interest since core–shell particles have superior physical and chemical properties compared to their single-component counterparts. The cathode material Li(Ni{sub 0.8}Co{sub 0.15}Al{sub 0.05}){sub 0.8}(Ni{sub 0.5}Mn{sub 0.5}){sub 0.2}O{sub 2} (LNCANMO) with a core–shell structure was synthesized via a co-precipitation method and investigated as the cathode material for lithium ion batteries. The core–shell particle consisted of LiNi{sub 0.8}Co{sub 0.15}Al{sub 0.05}O{sub 2} (LNCAO) as the core and LiNi{sub 0.5}Mn{sub 0.5}O{sub 2} as the shell. The cycling behavior between 2.8 and 4.3 V at a current of 0.1 C-rate showed a reversible capacity of ∼195 mAh g{sup −1} with little capacity loss after 50 cycles. Extensive assessment of the electronic structures of the LNCAO and LNCANMO cathode materials was carried out using X-ray absorption spectroscopy (XAS). XAS has been used for structure refinement on the transition metal ion of the cathode. In particular, XAS studies of electrochemical reactions have been done from the viewpoint of the transition metal ion. In this study, Ni K-edge XAS spectra of the charge and discharge processes of LNCAO and LNCANMO were investigated.

36 MATERIALS SCIENCE↗

Low temperature synthesis of nanocrystalline magnesium aluminate with high surface area by surfactant assisted precipitation method: Effect of preparation conditions

Highlights: ► MgAl{sub 2}O{sub 4} showed a high surface area and nanocrystalline structure. ► Addition of polymeric surfactant affected the structural properties of MgAl{sub 2}O{sub 4}. ► MgAl{sub 2}O{sub 4} prepared with surfactant showed a hollow cylindrical shape. -- Abstract: A surfactant assisted co-precipitation method was employed for the low temperature synthesis of magnesium aluminate spinel with nanocrystalline size and high specific surface area. Pluronic P123 triblock copolymer and ammonia solution were used as surfactant and precipitation agent, respectively. The prepared samples were characterized by thermal gravimetric and differential thermal gravimetric analyses (TG/DTG), X-ray diffraction (XRD), N{sub 2} adsorption (BET) and transmission electron microscopy (TEM) techniques. The effects of several process parameters such as refluxing temperature, refluxing time, pH, P123 to metals mole ratio (P123/metals) and calcination temperature on the structural properties of the samples were investigated. The obtained results showed that, among the process parameters pH and refluxing temperature have a significant effect on the structural properties of samples. The results revealed that increase in pH from 9.5 to 11 and refluxing temperature from 40 °C to 80 °C increased the specific surface area of prepared samples in the range of 157–188 m{sup 2} g{sup −1} and 162–184 m{sup 2} g{sup −1}, respectively. The XRD analysis showed the single-phase MgAl{sub 2}O{sub 4} was formed at 700 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improvements in electrical and dielectric properties of substituted multiferroic LaMnO{sub 3} based nanostructures synthesized by co-precipitation method

Graphical abstract: Display Omitted Highlights: ► Simultaneous double ion substitutions philosophy is introduced in LaMnO{sub 3}. ► La{sub 1−x}Gd{sub x}Mn{sub 1−y}Cr{sub y}O{sub 3} nanoparticles are not reported previously. ► La{sub 1−x}Gd{sub x}Mn{sub 1−y}Cr{sub y}O{sub 3} nanoparticles are synthesized by co-precipitation method. ► The 12 fold increase in resistivity of LaMnO{sub 3} nanostructures is observed. -- Abstract: A series of La{sub 1−x}Gd{sub x}Mn{sub 1−y}Cr{sub y}O{sub 3} nanoparticles (where x, y = 0, 0.25, 0.50, 0.75 and 1.0) has been synthesized by the chemical co-precipitation method, involving double ion substitution philosophy. The nanoparticles were characterized by thermo gravimetric analysis (TGA), X-ray fluorescence spectrometry (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, vibrating sample magnetometer (VSM), DC electrical resistivity and dielectric measurements. The XRD and FTIR analysis confirmed the single orthorhombic phase and the crystallite size were found in the range of 16–34 nm. DC resistivity exhibited very interesting behavior which increased from 1.41 × 10{sup 8} to 16.35 ± 0.2 × 10{sup 8} Ω cm upon complete double ions replacement of La and Mn with Gd and Cr, respectively. This very high resistivity variation upon substitution definitely would open new avenues for applications of these materials in microwave devices and other related areas. The dielectric properties of these nanoparticles were also studied at room temperature in the range of 6 kHz to 5 MHz and the maximum dielectric behavior (ε′ = 2.86 × 10{sup 3}, tan δ = 5.41, ε″ = 15.5 × 10{sup 3}) was exhibited by La{sub 0.75}Gd{sub 0.25}Mn{sub 0.75}Cr{sub 0.25}O{sub 3} at 6 kHz. Hysteresis loops measurements showed that the synthesized nanomaterials are paramagnetic in nature at room temperature.

36 MATERIALS SCIENCE↗

Synthesis of amino-silane modified superparamagnetic Fe{sub 3}O{sub 4} nanoparticles and its application in immobilization of lipase from Pseudomonas fluorescens Lp1

Highlights: ► Magnetic nanoparticles were synthesized by chemical co-precipitation method. ► Surface was functionalized with amino-silane and used for lipase immobilization. ► Characterized through TEM, SEM, XRD, FT-IR and VSM analysis. ► The functionalization and immobilization did not affect the magnetite properties. ► The immobilized lipase showed greater functional property than free lipase. - Abstract: Superparamagnetic nanoparticles (Fe{sub 3}O{sub 4}–magnetite) were prepared by chemical co-precipitation method and their surface was functionalized with 3-aminopropyltriethoxysilane via silanization reaction to obtain amino functionalized magnetic nanoparticles. The purified lipase from Pseudomonas fluorescens Lp1 was immobilized onto functionalized magnetite using glutaraldehyde as the coupling agent. The characterization of the nanoparticles was done by scanning electron microscopy, transmission electron microscopy, powder X-ray diffraction, vibrating sample magnetometry and Fourier transformed infrared spectroscopy. The size of the magnetite was measured about 10–30 nm. The results of characterization study revealed the successful immobilization of lipase on to functionalized magnetite. The saturation magnetization of magnetic nanoparticles was found to be 28.34 emu/g whereas the immobilized magnetic nanoparticle was 17.074 emu/g. The immobilized lipase had greater activity at 50 °C and thermal stability upto 70 °C. It exhibited excellent reusability for 4 cycles and storage stability upto 15 days by retaining 75% of its initial activity.

36 MATERIALS SCIENCE↗

Fe{sub 3}O{sub 4}@graphene oxide composite: A magnetically separable and efficient catalyst for the reduction of nitroarenes

Highlights: ► The Fe{sub 3}O{sub 4}@GO composite was prepared by a facile co-precipitation method. ► Fe{sub 3}O{sub 4} nanoparticles are well distributed on GO nanosheets. ► Fe{sub 3}O{sub 4}@GO was for the first time explored as a catalyst to reduce nitroarenes. ► Fe{sub 3}O{sub 4}@GO exhibits higher catalytic activity. ► The composite catalyst is easily recycled due to its magnetic separability. - Abstract: We reported a facile co-precipitation method to prepare a highly active Fe{sub 3}O{sub 4}@graphene oxide (Fe{sub 3}O{sub 4}@GO) composite catalyst, which was fully characterized by means of X-ray diffraction (XRD), Fourier transformed infrared (FTIR) spectroscopy, transmission electron microscopy (TEM) and N{sub 2} adsorption–desorption measurements. The results demonstrated that the Fe{sub 3}O{sub 4} nanoparticles (Fe{sub 3}O{sub 4} NPs) with a small diameter of around 12 nm were densely and evenly deposited on the graphene oxide (GO) sheets. The as-prepared Fe{sub 3}O{sub 4}@GO composite was explored as a catalyst to reduce a series of nitroarenes for the first time, which exhibited a great activity with a turnover frequency (TOF) of 3.63 min{sup −1}, forty five times that of the commercial Fe{sub 3}O{sub 4} NPs. The dosages of catalyst and hydrazine hydrate are both less than those reported. Furthermore, the composite catalyst can be easily recovered due to its magnetic separability and high stability.

36 MATERIALS SCIENCE↗

Photocatalytic performances and activities of Ag-doped CuFe{sub 2}O{sub 4} nanoparticles

Graphical abstract: - Highlights: • CuFe{sub 2}O{sub 4} nanocrystals were synthesized by a co-precipitation method. • Ag/CuFe{sub 2}O{sub 4} catalyst was prepared by the wetness impregnation strategy. • The structural properties of Ag/CuFe{sub 2}O{sub 4} were investigated by XRD, TEM, DRS, and XPS techniques. • Ag/CuFe{sub 2}O{sub 4} has higher photocatalytic activity. - Abstract: In this work, CuFe{sub 2}O{sub 4} nanoparticles were synthesized by a chemical co-precipitation route. The Ag/CuFe{sub 2}O{sub 4} catalyst was prepared based on the CuFe{sub 2}O{sub 4} nanoparticles by the incipient wetness impregnation strategy, which showed excellent photoelectric property and catalytic activity. The structural properties of these samples were systematically investigated by X-ray powder diffraction (XRD), transmission electronic microscopy (TEM), UV–vis diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FT-IR) techniques. The photo-induced charge separation in the samples was demonstrated by surface photovoltage (SPV) measurement. The photocatalytic degradation of 4-CP by the Ag/CuFe{sub 2}O{sub 4} and CuFe{sub 2}O{sub 4} samples were comparatively studied under xenon lamp irradiation. The results indicate that the Ag/CuFe{sub 2}O{sub 4} sample exhibited the higher efficiency for the degradation of 4-CP.

36 MATERIALS SCIENCE↗

Influence of In doping on the structural, photo-luminescence and alcohol response characteristics of the SnO{sub 2} nanoparticles

Graphical abstract: When the sample is exposed to air, the atmospheric oxygen O{sub 2} adsorbs on the sample surface in the form of ionic species O{sup −} by capturing electrons from the conduction band. The adsorbed ionic species O{sup −} react with the test alcohol molecules and are responsible for sensing mechanism. - Highlights: • In-doped SnO{sub 2} samples show smaller crystallinity with crystallite size: ∼7–9 nm. • EDX analyses confirm the incorporation of indium ions in the SnO{sub 2} lattice. • Raman spectra are consistent with the results of XRD and SAED pattern. • Alcohol response has been found to increase with the indium dopant concentration. • 3 at% In-doped sample exhibits maximum response (96.5%) to propan-2-ol at 250 °C. - Abstract: Undoped and In-doped SnO{sub 2} nanoparticles were synthesized by the co-precipitation method. Upon In doping, the samples exhibit reduced crystallinity as compared to the undoped SnO{sub 2}. The Raman spectra of the undoped samples exhibit three fundamental peaks at 467.3, 633.4 and 774.6 cm{sup −1} corresponding to E{sub g}, A{sub 1g} and B{sub 2g} vibration modes, respectively. The PL spectra show two strong emission bands at the wavelengths 417 nm and 479 nm, along with five weak emission peaks in the visible region. Alcohol response characteristics of the In-doped SnO{sub 2} samples were investigated for various concentrations (10–50 ppm) at different operating temperatures (150–250 °C). Among all the samples examined, the 3 at% In-doped SnO{sub 2} sample shows maximum response (96.5%) to propan-2-ol, followed by ethanol (92%) and methanol (90%) at the operating temperature of 250 °C for 50 ppm concentration. For each test alcohol, the response has been found to increase with the In dopant concentration.

36 MATERIALS SCIENCE↗

The effects of cerium doping on the size, morphology, and optical properties of α-hematite nanoparticles for ultraviolet filtration

Highlights: • Possible application of cerium-doped α-hematite as ultraviolet filter. • Nanoparticles obtained through co-precipitation technique using various cerium doping levels followed by annealing. • Comprehensive materials characterisation utilizing XRD, DSC/TGA, STEM, UV–vis spectroscopy. • Increasing cerium content reduces particle sizing and alters morphology. • Solubility of cerium in hematite seen between 5 and 10% doping, 10% cerium doping greatly enhances attenuation in ultraviolet region and increases optical bandgap. - Abstract: Metal oxide nanoparticles have potential use in energy storage, electrode materials, as catalysts and in the emerging field of nanomedicine. Being able to accurately tailor the desirable properties of these nanoceramic materials, such as particle size, morphology and optical bandgap (E{sub g}) is integral in the feasibility of their use. In this study we investigate the altering of both the structure and physical properties through the doping of hematite (α-Fe{sub 2}O{sub 3}) nanocrystals with cerium at a range of concentrations, synthesised using a one-pot co-precipitation method. This extremely simple synthesis followed by thermal treatment results in stable Fe{sub 2−x}Ce{sub x}O{sub y} nanoceramics resulting from the burning of any unreacted precursors and transformation of goethite-cerium doped nanoparticle intermediate. The inclusion of Ce into the crystal lattice of these α-Fe{sub 2}O{sub 3} nanoparticles causes a significantly large reduction in mean crystalline size and alteration in particle morphology with increasing cerium content. Finally we report an increase optical semiconductor bandgap, along with a substantial increase in the ultraviolet attenuation found for a 10% Ce-doping concentration which shows the potential application of cerium-doped hematite nanocrystals to be used as a pigmented ultraviolet filter for cosmetic products.

36 MATERIALS SCIENCE↗

Synthesis and characterization of mesoporous MgO by template-free hydrothermal method

Highlights: • A simple synthesis of porous MgO with diameter size from 3 to 10 μm without any templates. • Effect of temperature and time were investigated. • Systematic characterization by TG/DTA, XRD, SEM, TEM, and nitrogen adsorption–desorption isotherm of MgO. • A possible formation and crystal growth mechanism of mesopores MgO is proposed. - Abstract: Mesoporous MgO particles have been synthesized through a novel template-free hydrothermal co-precipitation method using a Mg(NO{sub 3}){sub 2} solution as the magnesium source and NaCO{sub 3} as precipitant. The samples were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and N{sub 2} adsorption–desorption analysis. The results indicate that the MgO samples have a disordered mesoporous structure, a large BET surface area, and a large pore volume. The effect of reaction temperature on the MgO product BET surface area was studied. A possible formation and crystal growth mechanism for mesoporous MgO is proposed.

36 MATERIALS SCIENCE↗

Monophasic zircon-type tetragonal Eu{sub 1−x}Bi{sub x}VO{sub 4} solid-solution: synthesis, characterization, and optical properties

Highlights: • Complete Eu{sub 1−x}Bi{sub x}VO{sub 4} with zircon-type structure was successfully synthesized. • The band gap of the samples could be adjusted and controlled by bismuth content. • Eu{sub 1−x}Bi{sub x}VO{sub 4} show strong red emission under both near UV and visible-light excitation. - Abstract: By combining the methods of co-precipitation and hydrothermal synthesis methods, the complete solid-solution of Eu{sub 1−x}Bi{sub x}VO{sub 4} with monophasic zircon-type structure was successfully synthesized. The zircon-type structure was determined by X-ray diffractometer and Raman scattering, and the optical properties were characterized by ultraviolet-visible diffuse reflectance and photoluminescence spectrophotometer. The results indicate that the band gap of Eu{sub 1−x}Bi{sub x}VO{sub 4} could be adjusted and controlled by bismuth content in the range of x = 0–0.9. Meanwhile, the Eu{sub 1−x}Bi{sub x}VO{sub 4} solid-solution phosphors show strong red light emission was shown in 619 nm under both near UV-light and visible-light excitation. Notably, the emission intensity of Eu{sub 1−x}Bi{sub x}VO{sub 4} (x = 0.4) is the strongest in all samples.

36 MATERIALS SCIENCE↗