Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CERIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

The Ce-Fe-Ti System: Phase Equilibria in the Fe-rich Corner at 1000 °C

The rare earth–iron–transition metal systems are of increasing interest in the search for novel permanent magnet phases. This work reports on the solidification behavior, phase equilibria and stability range of solid phases in the ternary Ce-Fe-Ti system, focusing on the iron-rich region (> 65 at.% Fe) of the isothermal section at 1000 °C. Further, two ternary phases Ce 1.03 Fe 12-x Ti x (x = 0.87–1.02) with ThMn 12 structure type and Ce 3.06 Fe 27.6 Ti 1.4 with Nd 3 Fe 29 structure type were observed. Magnetic measurements of Ce 1.03 Fe 12-x Ti x and Ce 3.06 Fe 27.6 Ti 1.4 revealed ferromagnetic ordering with Curie temperatures of 550 K and 327 K, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Efficient transfer hydrodehalogenation of halophenols catalyzed by Pd supported on ceria

We report the transfer hydrodehalogenation (THD) of halophenols is efficiently catalyzed by palladium supported on high surface area ceria (Pd/CeO 2 ) under mild conditions (65 °C) using isopropanol (iPrOH) as hydrogen source. The reactivity of 4-halophenols (4-X-PhOH) varies in the order 4-F-PhOH > 4-Cl-PhOH > 4-Br-PhOH > > 4-I-PhOH and appears to be controlled by the desorption of halides from the catalyst surface. Kinetic analysis of the reactions and temperature programmed surface reaction (TPSR) experiments indicate that oxidative addition of C-X bonds and H-abstraction from isopropoxide compete for the same active sites on Pd. The catalyst was able to conduct the THD of various hazardous pollutants and emerging contaminants (dichlorodiphenyltrichloroethane (DDT), pentachlorophenol, pentafluorophenol and triclosan).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Intuitive study on the effect of support morphology over Cs-Ru/CeO 2 catalyst for microwave-initiated ammonia synthesis

Microwave-initiated ammonia synthesis is a potential candidate to the current Haber-Bosch process that can operate from stranded renewable energy source. Our previous studies indicated Cs-Ru/CeO 2 is a promising catalyst for microwave-assisted ammonia synthesis and the morphology of CeO 2 significantly affects the catalytic performance. In this paper, CeO 2 support with distinct morphologies nanorod, nanoparticle, and microstructure, is studied comprehensively at ambient pressure and low temperature under microwave irradiation. Moreover, CeO 2 nanorods of various sizes were synthesized at different timing (24, 36, and 48 h). Nanorods synthesized at 36 h exhibited superior activity associated to high dispersion and small Ru particle size.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

The solubility and speciation of REE phosphate endmembers (CePO 4 and YPO 4 ) in Cl-rich aqueous fluids from 350 to 450 °C and implications for natural systems

The rare earth elements (REE) are important metals used increasingly in advanced technologies. Within the crust, the elements Ce and Y are commonly more abundant compared to other lanthanides and comprise important end-member constituents of REE-bearing minerals. Specifically, Ce is part of the light (L) REE which have larger ionic radii than the heavy (H) REE, which are grouped together with Y. These differences in ionic radius can lead to important physico-chemical trends within the lanthanide group. Despite a recent increase in experimental and thermodynamic data for the REE at high temperature and pressure, there is still a significant lack of these data at supercritical conditions. In this study we conducted batch-type experiments to measure the solubility of REE phosphates (CePO 4 and YPO 4 ) at varying starting pH (1.5–10), and salinity (0.01–1.4 mol/kg NaCl) at 350 and P sat , and from 400 to 450 °C at 700 bar. Results show that the solubility of Ce (33–0.14 ppb) is generally higher than Y (13–0.13 ppb) and that Ce complexes more strongly with both chloride and hydroxyl ligands compared to Y. The solubilities of both REE phosphates are highly pH-dependent and, to a lesser extent, depend on salinity at the studied conditions. The solubility data from this study were implemented into the GEMSFITS program to optimize the thermodynamic properties of Ce and Y hydroxyl and chloride species. The updated standard partial molal Gibbs energies of formation (Δ f G 0 T,P ) are used within the experimental temperature and pressure range to accurately predict the CePO 4 and YPO 4 solubility and Ce and Y speciation behavior. Based on the updated thermodynamic properties we also provide formation constants (log β n Cl,OH ) for Ce and Y hydroxyl and chloride species. Updated thermodynamic properties are applied to model REE-apatite dissolution and REE mobility based on the Pea Ridge iron oxide apatite deposit in Missouri, USA. The apatite dissolution model replicates natural observations including the replacement of monazite and xenotime after apatite and is an example of the utility of the new thermodynamic constants applied to supercritical crustal fluids. Furthermore, the findings of this study advance the predictive capabilities of geochemical models, our understanding of the behavior of individual REE, and permit modeling the overarching fractionation trends between LREE and HREE in supercritical crustal fluids.

58 GEOSCIENCES↗
DOE OSTI2021

Modeling the performance and faradaic efficiency of solid oxide electrolysis cells using doped barium zirconate perovskite electrolytes

Y-doped BaZrO 3 (BaZr 1 x Y x O 3 δ , or “BZY”), a proton-conducting ceramic featuring high bulk conductivity and good chemical stability, is a promising electrolyte material for solid oxide electrolysis cells. Further doping with Ce and/or Yb (creating materials “BCZY” and “BCZYYb”) can improve conductivity and sintering properties, but at significant penalty to cells’ faradaic efficiency (FE). Studies have proposed that reduction of lattice Ce can occur in the hydrogen electrode, which consumes some hydrogen produced by the hydrogen evolution reaction, leading to decreased FE. Despite studies suggesting this phenomenon, the mechanism is largely unknown. In this work, we developed a multiphysics model to study the transport of multiple defect species and the performance of BZY, BCZY, and BCZYYb, capturing the tradeoff between enhanced performance at the cost of FE for BCZY and BCZYYb electrolytes compared to BZY. We also found that increasing the water content of the anode gas supply lowers the current output of the cell but results in better FE. The model, which uses several parameters previously unavailable in the literature, was validated to experiments varying temperature, steam water content, and electrolyte material, as well as two performance metrics (performance curves and FE). Results verify and explain observed trends, informing future work on Ce-doped BZY electrolytes.

08 HYDROGEN↗
DOE OSTI2023

Investigating the failure behavior of cast Al-11Ce-0.4Mg alloys using in-situ scanning electron microscopy tensile testing

Within the last decade, research on Al-Ce-Mg alloys has reported promising results for use in cast part applications. In this paper, the failure behavior of cast Al-11Ce-0.4Mg (wt%) was investigated experimentally with focus on the effect the matrix and intermetallic phases have on the fracture propagation behavior at failure. For the first time, in-situ SEM tensile testing was used to study the failure behavior of cast Al-Ce alloys, reporting results for uniaxial, DIC, and single edge notch tensile tests. The results of the in-situ SEM tensile testing were compared with the materials characterization experiments, which included serial sectioning, EBSD, EDS, and fractography. Analysis of EBSD and EDS mapping of cast Al-11Ce-0.4Mg showed that the cast microstructure was a hypereutectic two phase Al-Ce alloy with grains encompassing large complex colonies of laminar eutectic Al 11 Ce 3 intermetallic. The uniaxial tensile results reported the effect casting defects have on the strength and ductility of the alloy, and DIC in-situ testing showed that the eutectic colonies plastically deform less than the matrix phase. In-situ SEM single edge notch tensile testing displayed how the strength of an individual phase affected the crack propagation direction in the alloy. The results of both the materials characterization and in-situ tensile testing experiments on the failure of this alloy revealed further directions for future alloy development that can improve both the strength and fracture toughness of Al-Ce-Mg alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2020

On the enhanced sulfur and coking tolerance of Ni-Co-rare earth oxide catalysts for the dry reforming of methane

In this study, sulfur and coking tolerance of Ni-based dry reforming catalysts were examined. Catalysts utilizing both Ce/Zr and Ce/La oxide supports, some with additional Co, were tested. Long-term reaction runs were conducted with and without sulfur in the feed. Catalysts were also characterized by STEM, XPS, XAFS and XANES and CO chemisorption. Only catalysts where Co was also present, and supported on the Ce-Zr oxide, were capable of extended sulfur tolerance at >20 ppm sulfur. This tolerance, along with a greatly reduced coking rate, is linked to Co in intimate contact with Ni, the mixture existing as clusters anchored and influenced electronically by the oxide support. The activation of methane takes place on these sites. Larger metal aggregates formed by ripening during reaction appear to be spectators. The measured activation energies for dry reforming suggest that CO 2 activation takes place at the oxide interface, and is a kinetically significant step.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Stabilization and manipulation of highly concentrated copper single atoms by high entropy oxides

Facile and controllable methodologies capable of providing single atom catalysts (SACs) with high-density active metal sites and sintering-resistance under harsh conditions are highly desired and grand challenges in heterogeneous catalysis. Herein, the entropy effect was leveraged to stabilize and manipulate the electronic properties of copper SACs. The as-developed ultrasonication-driven approach could integrate highly concentrated Cu SAs within the lattice of fluorite-structured high entropy oxide (HEFO) under ambient conditions (CuO-HEFO). The dual benefits from the high entropy effect of the support and the in-situ lattice engineering led to the generation of abundant Cu 1+ species and oxygen defects, together with ultra-high stability and sintering-resistance under extremely harsh conditions. This was confirmed by deploying non-high entropy support (CuO-CeO 2 ) or Cu sites located on the surface of HEFO (CuO@HEFO). In conclusion, the catalytic activity of CuO-HEFO surpassed that of CuO-CeO 2 and CuO@HEFO in CO oxidation together with well-maintained long-term stability and resistance to gas impurities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Crystal structure and magnetic properties of CeFe 11 M (M = Mo, W)

Tetragonal CeFe 11 Mo (struct. type ThMn 12 , a = 8.529(1) Å, c = 4.766(1) Å, V = 346.68(1) Å 3 ) and novel isostructural CeFe 11 W (a = 8.539(1) Å, c = 4.754(1) Å, V = 346.62(1) Å 3 ) are obtained in bulk, as homogenized single-phase arc-melted alloys. Here, their crystal structures are evaluated by full profile Rietveld analysis of the powder X-ray diffraction patterns which confirm that Ce occupies the 2a atomic site in both cases, whereas atomic disorder is present in the Fe-sublattice, i.e., predominantly on the dumbbell 8i site and minorly on two other sites 8j and 8f. In CeFe 11 Mo the third element, M, is mixed with Fe on the 8i dumbbell site and 8f atomic position, whereas in CeFe 11 W, M is mixed on the 8i and 8j Fe sites. In these bulk CeFe 12-x M x alloys the tetragonal structure persists at lower M content, x < 1 here, in comparison to known similar alloys, with x > 1. Because of the low M content, comparably higher values of mass magnetization and Curie temperature are achieved i.e., CeFe 11 Mo: ϭ s = 104 emu/g (14.7 µ B /f.u.), T c = 420 K and CeFe 11 W: ϭ s = 99 emu/g (16.5 µ B /f.u.), T c = 450 K. Magnetocrystalline anisotropy is uniaxial with anisotropy fields H a ∼ 14.5 and 16.5 kOe, respectively. Based on Curie temperature and magnetic anisotropy enhancements, using tungsten as the stabilizing dopant is more beneficial than molybdenum.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Production of anhydrous ƒ-element fluorides through the ionothermal treatment of ƒ-element oxalates

The pivotal role of uranium and plutonium fluorides in the nuclear fuel cycle, particularly in the pyrochemical reduction process, is well recognized. Traditionally, the fluorination of uranium and plutonium materials relies on the use of highly toxic and corrosive gases (e.g., HF (g) , F 2(g) ). Herein, we present an alternative approach using the ionic liquid 1‑butyl‑3-methylimidazolium hexafluorophosphate ([Bmim][PF 6 ] (l) ) and/or hexafluorophosphoric acid (HPF 6(aq) ) as fluorinating agents for the ƒ-element oxalates M$^{III}_{2}$(C 2 O 4 ) 3 ∙ 9H 2 O (s) M$^{III}_{2}$(C 2 O 4 ) 3 ∙ 9H 2 O (s) (M III = Ce, Pu) and M IV (C 2 O 4 ) 2 ∙ 6H 2 O (s) (M IV = Th, U). Our findings demonstrate that [Bmim][PF 6 ] (l) and HPF 6(aq) enable the ionothermal fluorination of ƒ-element oxalates, resulting in the formation of anhydrous CeF 3(s) , ThF 4(s) , and UF 4(s) within 2 hours at 200 °C. This method also facilitates the partial fluorination of plutonium(III) oxalate, yielding a mixture of anhydrous PuF 3(s) and an unidentified phase. Overall, the ionothermal treatment approach offers a safer and more efficient means of producing anhydrous ƒ-element fluorides than conventional methods involving hazardous gases. In addition, we describe the morphology of UF 4(s) materials as a function of production route and demonstrate the presence of morphological signatures that could be used during a nuclear forensic investigation.

Cerium↗
DOE OSTI2023

Determination of Ce 3+ , Co 2+ , Mn 2+ and Fe 2+ diffusion coefficients in Nafion® membrane

Concentration gradient diffusion coefficients for Ce 3+ , Co 2+ , Mn 2+ and Fe 2+ cations are determined in Nafion®211 membranes over a wide range of environmental conditions. Measurements are made using finite-width cation-rich bands introduced to NR211 via a hot-pressing procedure. A robust method of accurate diffusion coefficient determination of the finite-width deposits is developed using a Fick's second law of diffusion solution for one-dimensional systems. The transition metal dications are found to have nearly identical NR211 diffusion coefficients under water saturated conditions over the 22–80 °C range. The powerful chemical mitigant, Ce 3+ , is about one-half as diffusive as the dications under identical conditions. Derived diffusion coefficients for Ce 3+ and Co 2+ are found to be independent of initial cation concentration over the range of 12.5–70 mol% exchange level. The diffusion behavior of Ce 3+ in 80 °C liquid water and saturated water vapor is identical. The diffusion coefficients of Ce 3+ are shown to have a strong dependence on membrane hydration level varying by a factor of more than 30 over the range of 95 to 40% RH. Finally, the implications of these new diffusion findings are applied to a discussion of potential guidelines for the development of highly durable fuel cell systems, which employ mobile metal cations as lifetime-extending redox stabilizers.

08 HYDROGEN↗
DOE OSTI2024

Microstructural refinement of an Al-Ce-Mg alloy via Shear Assisted Processing and Extrusion

Al-Ce alloys have attracted recent interest because of their high thermal stability due to the low solubility of Ce in the Al matrix. The Al 11 Ce 3 eutectic phase gives excellent strain hardening behavior and moderate high-temperature strength in the as-cast state. However, its strengthening effect is limited by its coarse as-cast structure. Therefore, alternative manufacturing methods such as additive manufacturing or equal channel angular pressing have been applied to refine the Al 11 Ce 3 phase to good effect. However, these techniques are both expensive and time-consuming. Therefore, this study aims to use Shear Assisted Processing and Extrusion (ShAPE), an emerging solid phase processing technique that is more easily scalable than the previously mentioned methods. ShAPE can produce useful cross-sections of an Al-8Ce-4Mg alloy while refining the Al 11 Ce 3 phase to produce a higher strength material. It was found that a low temperature ShAPE process can improve the room temperature yield strength by ~60 % compared to a binary Al-4Mg alloy. Additionally, the high-temperature yield strength of the Al-Ce alloys increased by 20%, with a simultaneous 15% improvement in ductility compared to the binary Al-Mg alloy. Finally, these results highlight the potential for ShAPE as a processing technique for Al-Ce alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Radionuclide transport in fractured chalk under abrupt changes in salinity

Internationally, it has been agreed that geologic repositories for spent fuel and radioactive waste are considered the internationally agreed upon solution for intermediate and long-term disposal. In countries where traditional nuclear waste repository host rocks (e.g., clay, salt, granite) are not available, other low permeability lithologies must be studied. Here, chalk is considered to determine its viability for disposal. Despite chalk's low bulk permeability, it may contain fracture networks that can facilitate radionuclide transport. In arid areas, groundwater salinity may change seasonally due to the mixing between brackish groundwater and fresh meteoric water. Such salinity changes may impact the radionuclides' mobility. In this study, radioactive U(VI) and radionuclide simulant tracers (Sr, Ce and Re) were injected into a naturally fractured chalk core. The mobility of tracers was investigated under abrupt salinity variations. Two solutions were used: a low ionic strength (IS) artificial rainwater (ARW; IS ~0.002) and a high IS artificial groundwater (AGW; IS ~0.2). During the experiments, the tracers were added to ARW, then the carrier was changed to AGW, and vice versa. Ce was mobile only in colloidal form, while Re was transported as a conservative tracer. Both Re and Ce demonstrated no change in mobility due to salinity changes. In contrast, U and Sr showed increased mobility when AGW was introduced and decreased mobility when ARW was introduced into the core. These experimental results, supported by reactive transport modeling, suggest that saline groundwater solutions promote U and Sr release via ion-exchange and enhance their migration in fractured chalk. Here the study emphasizes the impact of salinity variations near spent fuel repositories and their possible impact on radionuclide mobility.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2020

Methane Activation on Metal-Doped (111) and (100) Ceria Surfaces with Charge-Compensating Oxygen Vacancies

Reducing the temperature for methane activation is an important objective that would benefit many technological applications. In this work we explore the possibility to achieve this goal using single atom catalysts (SACs) on ceria surfaces. In particular, we focus on Ag SACs, which have recently been suggested to be promising catalysts for both the oxidation of molecular hydrogen and CH 4 activation. The rate limiting step of methane activation on ceria is the breaking of the first C-H bond. Using first principles calculations, we investigate this reaction on CeO 2 (111) and (100) surfaces, which are both frequently exposed on ceria nanoparticles. For undoped ceria, our results show that the dissociation of CH 4 to CH 3 + H has a lower barrier on the (001) surface than on the (111) one. On both surfaces, the presence of Ag enhances the binding of CH 4 to the surface and reduces the activation energy for its dissociation. Interestingly, the formation of methanol via the Mars-van Krevelen mechanism has a slightly lower energy barrier than the dissociation of CH 4 to CH 3 + H on Ag-doped CeO 2 (111), suggesting that methanol is a likely product of methane activation on this surface. Here, a novel aspect of our work relative to previous studies on CH 4 activation over transition metal doped ceria is that we mainly focus on stable surface structures where each Ag dopant substituting a Ce atom forms a complex with a surface oxygen vacancy (VO). Our results show that these Ag-VO complexes play a critical role and accounting for their presence is essential for a proper description of the surface reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Enhanced Catalytic Performance of a Ce/V Oxo Cluster through Confinement in Mesoporous SBA-15

To increase catalytic efficiency, mesoporous supports have been widely applied to immobilize well-defined metal oxide clusters due to their ability to stabilize highly dispersed clusters. Here, for this study, a redox-active heterometallic Ce 12 V 6 -oxo cluster (CeV) was first presynthesized and then incorporated into mesoporous silica, SBA-15, via a straightforward impregnation method. Scanning transmission electron microscopy (STEM) and Fourier transform infrared spectroscopy (FTIR), in concert with scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM-EDS), verified the successful introduction of the CeV cluster inside the pore of SBA-15. The 51 V magic angle spinning solid-state nuclear magnetic resonance ( 51 V MAS NMR) spectroscopy and differential pair distribution function (dPDF) analysis confirmed the structural integrity of the CeV cluster inside the SBA-15. The composite was then benchmarked for liquid-phase oxidation of 2-chloroethyl ethyl sulfide (CEES) under mild conditions and gas-phase oxidative dehydrogenation (ODH) of propane under high temperatures (up to 550 °C). The catalytic reactivity results demonstrated 8- and 14-fold increase in turnover frequency (TOF) values of the composite (CeV@10SBA-2) than the bulk CeV cluster under the same conditions for CEES oxidation and ODH, respectively. These results highlight the improved reactivity of the catalytically active CeV cluster as attributed to the higher dispersion of the discrete cluster upon immobilization within the SBA-15 support.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗