Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CELLULASE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Understanding Lignin Fractionation and Characterization from Engineered Switchgrass Treated by an Aqueous Ionic Liquid

Aqueous ionic liquids (ILs) have received increasing interest because of their high efficacy in fractionating and pretreating lignocellulosic biomass while at the same time mitigating several challenges associated with IL pretreatment such as IL viscosity, gel formation during pretreatment, and the energy consumption and costs associated with IL recycling. This paper investigated the fate of lignin, its structural and compositional changes, and the impact of lignin modification on the deconstruction of cell wall compounds during aqueous IL (10% w/w cholinium lysinate) pretreatment of wild-type and engineered switchgrass. The 4CL genotype resulting from silencing of 4-coumarate:coenzyme A ligase gene (Pv4CL1) had a lower lignin content, relatively higher amount of hydroxycinnamates, and higher S/G ratio and appeared to be less recalcitrant to IL pretreatment likely due to the lower degree of lignin branching and more readily lignin solubilization. The results further demonstrated over 80% of lignin dissolution from switchgrass into the liquid fraction under mild conditions while the remaining solids were highly digestible by cellulases. The soluble lignin underwent partial depolymerization to a molecular weight around 500–1000 Da. 1 H– 13 C HSQC NMR results demonstrated that the variations in lignin compositions led to different modes of lignin dissolution and depolymerization during pretreatment of engineered switchgrass. Finally, these results provide insights into the impact of lignin manipulation on biomass fractionation and lignin depolymerization and lead to possible ways toward developing a more selective and efficient lignin valorization process based on aqueous IL pretreatment technology.

59 BASIC BIOLOGICAL SCIENCES↗

Assessing the Facile Pretreatments of Bagasse for Efficient Enzymatic Conversion and Their Impacts on Structural and Chemical Properties

Here, novel and sustainable pretreatment approaches are desired to improve the techno-commercial feasibility of biorefineries in the future. In this study, 10 renewable deep eutectic solvents (DESs) were evaluated for their pretreatment efficiency at facile conditions with sugar cane bagasse as substrate and compared with conventional pretreatment approaches (dilute alkali, dilute acid, and ionic liquid (IL)) for lignin removal, saccharification yield, cellulose accessibility, crystallinity, and physiochemical properties. Although, the highest delignification was obtained with dilute alkali (59.7%) and choline chloride:lactic acid or ChCl:LA (50.6%), the maximum enzymatic conversion of 98.0% and 90.4% was observed with IL (1-butyl-3-methylimidazolium acetate) and ChCl:LA, respectively. uclear magnetic resonance analysis of ChCl:LA-derived lignin showed selective removal of guaiacyl lignin without condensation structure formation observed. Interestingly, unlike IL, the lignin was substantially depolymerized after ChCl:LA pretreatment as determined by gel permeation chromatography. Further, high compatibility of ChCl:LA with cellulase in comparison of IL with easy recyclability and recycling showed that DESs synthesized from a renewable resource are promising “green” solvents for future biorefinery operations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Quantitative Molecular Atlas for Interactions Between Lignin and Cellulose

Lignin and cellulose are two of the most abundant polymers on Earth, and are found in close proximity within plant cell walls. Despite their ubiquity, relatively little is known quantitatively about their interactions within plants, and by extension how their interaction may affect industrial biomass utilization. Given the inherent heterogeneity of the lignin polymer and the structural complexity of cellulose, quantitative relationships between given cellulose faces and specific lignin chemistries have been challenging to ascertain experimentally. In this study, we use molecular simulation to examine individual combinations of cellulose binding face and lignin chemistry to build a quantitative lignin-cellulose interaction atlas, including contributions from both specific hydrogen bonds observed in simulation and nonspecific interactions between lignin and cellulose driven by solvent considerations. Over all monomeric and dimeric lignin chemistries tested, the hydrophobic 100 face is the preferred cellulose interaction site. Among the hydrophilic crystalline faces, binding of these molecules is strongest to the 110 cellulose face. The chemical composition of lignin monomers and dimers is also found to modulate the binding affinity, with additional methoxy groups increasing the contact area to the cellulose surface, which we hypothesize may protect native cellulose from degradation. Additional methoxylation and monomer linkages that facilitate planar aromatic ring orientations increase the binding affinity between small lignin-related molecules and cellulose, with the planar linkages between guaiacyl-type monomers leading to higher binding affinities. These trends can be extended to larger lignin polymers, where we quantify the relationships between lignin polymer size and binding affinity through replica exchange umbrella sampling simulations. Rather than molecular weight, the binding surface area between the lignin polymer and the cellulose surface dictates the interaction strength. As a result, based on the findings here, we expect there to be abundant and durable interaction between cellulose and lignin, particularly on the hydrophobic face of cellulose where cellulase enzymes typically bind.

09 BIOMASS FUELS↗

Suite of Activity-Based Probes for Cellulose-Degrading Enzymes

Microbial glycoside hydrolases play a dominant role in the biochemical conversion of cellulosic biomass to high-value biofuels. Anaerobic cellulolytic bacteria are capable of producing multicomplex catalytic subunits containing cell-adherent cellulases, hemicellulases, xylanases, and other glycoside hydrolases to facilitate the degradation of highly recalcitrant cellulose and other related plant cell wall polysaccharides. Clostridium thermocellum is a cellulosome producing bacterium that couples rapid reproduction rates to highly efficient degradation of crystalline cellulose. Herein, we have developed and applied a suite of difluoromethylphenyl aglycone, N-halogenated glycosylamine, and 2-deoxy-2-fluoroglycoside activity-based protein profiling (ABPP) probes to the direct labeling of the C. thermocellum cellulosomal secretome. These activity-based probes (ABPs) were synthesized with alkynes to harness the utility and multimodal possibilities of click chemistry, and to increase enzyme active site inclusion for LC-MS analysis. We directly analyzed ABP-labeled and unlabeled global MS data, revealing ABP selectivity for glycoside hydrolase (GH) enzymes in addition to a large collection of integral cellulosome-containing proteins. By identifying reactivity and selectivity profiles for each ABP, we demonstrate our ability to widely profile the functional cellulose degrading machinery of the bacterium. Derivatization of the ABPs, including reactive groups, acetylation of the glycoside binding groups, and mono- and disaccharide binding groups, resulted in considerable variability in protein labeling. Our probe suite is applicable to aerobic and anaerobic cellulose degrading systems, and facilitates a greater understanding of the organismal role associated within biofuel development.

Chauvigne-Hines, Lacie M↗

Development of a Multi-Point Quantitation Method to Simultaneously Measure Enzymatic and Structural Components of the Clostridium thermocellum Cellulosome Protein Complex

Clostridium thermocellum has emerged as a leading bioenergy-relevant microbe due to its ability to solubilize cellulose into carbohydrates, mediated by multi-component membrane-attached complexes termed cellulosomes. To probe microbial cellulose utilization rates, it is desirable to be able to measure the concentrations of saccharolytic enzymes and estimate the total amount of cellulosome present on a mass basis. Current cellulase determination methodologies involve labor-intensive purification procedures and only allow for indirect determination of abundance. We have developed a method using multiple reaction monitoring (MRM-MS) to simultaneously quantitate both enzymatic and structural components of the cellulosome protein complex in samples ranging in complexity from purified cellulosomes to whole cell lysates, as an alternative to a previously-developed enzyme-linked immunosorbent assay (ELISA) method of cellulosome quantitation. The precision of the cellulosome mass concentration in technical replicates is better than 5% relative standard deviation for all samples, indicating high precision for determination of the mass concentration of cellulosome components.

absolute quantitation↗

Engineering enhanced cellobiohydrolase activity

Glycoside Hydrolase Family 7 cellobiohydrolases (GH7 CBHs) catalyze cellulose depolymerization in cellulolytic eukaryotes, making them key discovery and engineering targets. However, there remains a lack of robust structure–activity relationships for these industrially important cellulases. Here, we compare CBHs from Trichoderma reesei (TrCel7A) and Penicillium funiculosum (PfCel7A), which exhibit a multi-modular architecture consisting of catalytic domain (CD), carbohydrate-binding module, and linker. We show that PfCel7A exhibits 60% greater performance on biomass than TrCel7A. To understand the contribution of each domain to this improvement, we measure enzymatic activity for a library of CBH chimeras with swapped subdomains, demonstrating that the enhancement is mainly caused by PfCel7A CD. We solve the crystal structure of PfCel7A CD and use this information to create a second library of TrCel7A CD mutants, identifying a TrCel7A double mutant with near-equivalent activity to wild-type PfCel7A. Overall, these results reveal CBH regions that enable targeted activity improvements.

09 BIOMASS FUELS↗

Enhanced delignification of steam-pretreated poplar by a bacterial laccase

The recalcitrance of woody biomass, particularly its lignin component, hinders its sustainable transformation to fuels and biomaterials. Although the recent discovery of several bacterial ligninases promises the development of novel biocatalysts, these enzymes have largely been characterized using model substrates: direct evidence for their action on biomass is lacking. Herein, we report the delignification of woody biomass by a small laccase (sLac) from Amycolatopsis sp . 75iv3. Incubation of steam-pretreated poplar (SPP) with sLac enhanced the release of acid-precipitable polymeric lignin (APPL) by ~6-fold, and reduced the amount of acid-soluble lignin by ~15%. NMR spectrometry revealed that the APPL was significantly syringyl-enriched relative to the original material (~16:1 vs. ~3:1), and that sLac preferentially oxidized syringyl units and altered interunit linkage distributions. sLac’s substrate preference among monoaryls was also consistent with this observation. In addition, sLac treatment reduced the molar mass of the APPL by over 50%, as determined by gel-permeation chromatography coupled with multi-angle light scattering. Finally, sLac acted synergistically with a commercial cellulase cocktail to increase glucose production from SPP ~8%. Altogether, this study establishes the lignolytic activity of sLac on woody biomass and highlights the biocatalytic potential of bacterial enzymes.

59 BASIC BIOLOGICAL SCIENCES↗

Specialized activities and expression differences for Clostridium thermocellum biofilm and planktonic cells

Clostridium thermocellum forms biofilms adherent to lignocellulosic feedstock in a typical continuous cell-monolayer to efficiently break down and uptake cellulose hydrolysates. The sessile cells of biofilms may revert to non-adherent planktonic cells through generation of offspring cells or microenvironment constraints such as limited surface area. These interdependent cell populations co-exist and have different contributions to culture activity and growth. Here, we developed a novel bioreactor design to rapidly harvest sessile and planktonic cell populations for omics studies. In RNA-seq analyses, within 3299 protein coding genes, 59% (or 1958 genes) were differentially expressed with a minimum two-fold change between the two cell populations isolated simultaneously at high culture activity. Furthermore, sessile cells had definitive greater expression of genes involved in catabolism of carbohydrates by glycolysis and pyruvate fermentation, ATP generation by proton gradient, the anabolism of proteins and lipids and cellular functions critical for cell division; planktonic cells had notably higher gene expression for flagellar motility and chemotaxis, cellulosomal cellulases and anchoring scaffoldins, and a range of stress induced homeostasis mechanisms such as oxidative stress protection by antioxidants and flavoprotein co-factors, methionine repair, Fe-S cluster assembly and repair in redox proteins, cell growth control through tRNA thiolation, recovery of damaged DNA by nucleotide excision repair and removal of terminal proteins by proteases. Our knowledge of these cellular adaptations will aid the engineering of industrially relevant strains for consolidated bioprocessing of solid lignocellulosic biomass

59 BASIC BIOLOGICAL SCIENCES↗

A synergistic biorefinery based on catalytic conversion of lignin prior to cellulose starting from lignocellulosic biomass

Current biomass utilization processes do not make use of lignin beyond its heat value. Here we report on a bimetallic Zn/Pd/C catalyst that converts lignin in intact lignocellulosic biomass directly into two methoxyphenol products, leaving behind the carbohydrates as a solid residue. Genetically modified poplar enhanced in syringyl (S) monomer content yields only a single product, dihydroeugenol. Lignin-derived methoxyphenols can be deoxygenated further to propylcyclohexane. In this work the leftover carbohydrate residue is hydrolyzed by cellulases to give glucose in 95% yield, which is comparable to lignin-free cellulose (solka floc). New conversion pathways to useful fuels and chemicals are proposed based on the efficient conversion of lignin into intact hydrocarbons.

09 BIOMASS FUELS↗

Diol pretreatment to fractionate a reactive lignin in lignocellulosic biomass biorefineries

Lignin-first fractionation has become a new biorefinery target to obtain valuable lignin monomers toward the complete utilization of lignocellulosic biomass, but increasing delignification through conventional pretreatment approaches often affects the structural integrity of the dissociated lignin. We discovered a new reactive lignin with a great solvent solubility and preserved β-O-4 linkages from eucalyptus after a modified organosolv pretreatment using 1,4-butanediol (1,4-BDO). Unlike conventional organosolv pretreatment using ethanol, lignin deposition was not observed in 1,4-BDO pretreatment. Similarly, 2D HSQC NMR analysis revealed that the residual lignin obtained from 1,4-BDO pretreated eucalypts contained a relatively higher amount of β-O-4 interunit linkages, indicating its higher integrity than ethanol pretreated lignin. This result agreed with the lower content of phenolic hydroxyl groups in dissolved lignin via 31 P NMR analysis. With increasing pretreatment severity, the amount of aliphatic hydroxyl groups decreased in ethanol pretreated lignin while it remained at a higher level in 1,4-BDO pretreated lignin. These results suggested that 1,4-BDO quenched the benzyl carbocation intermediate and formed ether linkages with a hydroxyl tail at the α position of the lignin. Solubility tests revealed that grafting aliphatic hydroxyl groups on 1,4-BDO lignin increased its dissolution. This phenomenon was further demonstrated for four different diols with similar structures. Likewise, more than 90% cellulose conversion was obtained for all the diol pretreated eucalyptus after 48 h of enzymatic hydrolysis with cellulase at a loading of 7.5 FPU per gram of glucan. Diol pretreatment thus offers a promising reaction pathway to coincide with three pillars of biorefinery for lignin fractionation, lignin structural integrity, and cellulose hydrolysis.

09 BIOMASS FUELS↗

Acoustic force spectroscopy reveals subtle differences in cellulose unbinding behavior of carbohydrate-binding modules

Protein adsorption to solid carbohydrate interfaces is critical to many biological processes, particularly in biomass deconstruction. To engineer more-efficient enzymes for biomass deconstruction into sugars, it is necessary to characterize the complex protein–carbohydrate interfacial interactions. A carbohydrate-binding module (CBM) is often associated with microbial surface-tethered cellulosomes or secreted cellulase enzymes to enhance substrate accessibility. However, it is not well known how CBMs recognize, bind, and dissociate from polysaccharides to facilitate efficient cellulolytic activity, due to the lack of mechanistic understanding and a suitable toolkit to study CBM–substrate interactions. Our work outlines a general approach to study the unbinding behavior of CBMs from polysaccharide surfaces using a highly multiplexed single-molecule force spectroscopy assay. Here, we apply acoustic force spectroscopy (AFS) to probe a Clostridium thermocellum cellulosomal scaffoldin protein (CBM3a) and measure its dissociation from nanocellulose surfaces at physiologically relevant, low force loading rates. An automated microfluidic setup and method for uniform deposition of insoluble polysaccharides on the AFS chip surfaces are demonstrated. The rupture forces of wild-type CBM3a, and its Y67A mutant, unbinding from nanocellulose surfaces suggests distinct multimodal CBM binding conformations, with structural mechanisms further explored using molecular dynamics simulations. Applying classical dynamic force spectroscopy theory, the single-molecule unbinding rate at zero force is extrapolated and found to agree with bulk equilibrium unbinding rates estimated independently using quartz crystal microbalance with dissipation monitoring. However, our results also highlight critical limitations of applying classical theory to explain the highly multivalent binding interactions for cellulose–CBM bond rupture forces exceeding 15 pN.

09 BIOMASS FUELS↗

Discrete and Structurally Unique Proteins (T$\bar{a}$pirins) Mediate Attachment of Extremely Thermophilic Caldicellulosiruptor Species to Cellulose

A variety of catalytic and noncatalytic protein domains are deployed by select microorganisms to deconstruct lignocellulose. These extracellular proteins are used to attach to, modify, and hydrolyze the complex polysaccharides present in plant cell walls. Cellulolytic enzymes, often containing carbohydrate-binding modules, are key to this process; however, these enzymes are not solely responsible for attachment. Few mechanisms of attachment have been discovered among bacteria that do not form large polypeptide structures, called cellulosomes, to deconstruct biomass. In this study, bioinformatics and proteomics analyses identified unique, discrete, hypothetical proteins (“t$\bar{a}$pirins,” origin from M$\bar{a}$ori: to join), not directly associated with cellulases, that mediate attachment to cellulose by species in the noncellulosomal, extremely thermophilic bacterial genus Caldicellulosiruptor. Two t$\bar{a}$pirin genes are located directly downstream of a type IV pilus operon in strongly cellulolytic members of the genus, whereas homologs are absent from the weakly cellulolytic Caldicellulosiruptor species. Based on their amino acid sequence, t$\bar{a}$pirins are specific to these extreme thermophiles. T$\bar{a}$pirins are also unusual in that they share no detectable protein domain signatures with known polysaccharide-binding proteins. Adsorption isotherm and trans vivo analyses demonstrated the carbohydrate-binding module-like affinity of the t$\bar{a}$pirins for cellulose. Crystallization of a cellulose-binding truncation from one t$\bar{a}$pirin indicated that these proteins form a long β-helix core with a shielded hydrophobic face. In addition, they are structurally unique and define a new class of polysaccharide adhesins. Strongly cellulolytic Caldicellulosiruptor species employ t$\bar{a}$pirins to complement substrate-binding proteins from the ATP-binding cassette transporters and multidomain extracellular and S-layer-associated glycoside hydrolases to process the carbohydrate content of lignocellulose.

59 BASIC BIOLOGICAL SCIENCES↗

Exogenous chalcone synthase expression in developing poplar xylem incorporates naringenin into lignins

Abstract Lignin, a polyphenolic polymer, is a major chemical constituent of the cell walls of terrestrial plants. The biosynthesis of lignin is a highly plastic process, as highlighted by an increasing number of noncanonical monomers that have been successfully identified in an array of plants. Here, we engineered hybrid poplar (Populus alba x grandidentata) to express chalcone synthase 3 (MdCHS3) derived from apple (Malus domestica) in lignifying xylem. Transgenic trees displayed an accumulation of the flavonoid naringenin in xylem methanolic extracts not inherently observed in wild-type trees. Nuclear magnetic resonance analysis revealed the presence of naringenin in the extract-free, cellulase-treated xylem lignin of MdCHS3-poplar, indicating the incorporation of this flavonoid-derived compound into poplar secondary cell wall lignins. The transgenic trees also displayed lower total cell wall lignin content and increased cell wall carbohydrate content and performed significantly better in limited saccharification assays than their wild-type counterparts.

59 BASIC BIOLOGICAL SCIENCES↗

Substitution of distal and active site residues reduces product inhibition of E1 from Acidothermus Cellulolyticus

Abstract Cellulases are largely afflicted by inhibition from their reaction products, especially at high-substrate loading, which represents a major challenge for biomass processing. This challenge was overcome for endoglucanase 1 (E1) from Acidothermus cellulolyticus by identifying a large conformational change involving distal residues upon binding cellobiose. Having introduced alanine substitutions at each of these residues, we identified several mutations that reduced cellobiose inhibition of E1, including W212A, W213A, Q247A, W249A and F250A. One of the mutations (W212A) resulted in a 47-fold decrease in binding affinity of cellobiose as well as a 5-fold increase in the kcat. The mutation further increased E1 activity on Avicel and dilute-acid treated corn stover and enhanced its productivity at high-substrate loadings. These findings were corroborated by funnel metadynamics, which showed that the W212A substitution led to reduced affinity for cellobiose in the +1 and +2 binding sites due to rearrangement of key cellobiose-binding residues.

59 BASIC BIOLOGICAL SCIENCES↗

The fungus gardens of leaf-cutter ants undergo a distinct physiological transition during biomass degradation

Leaf-cutter ants are dominant herbivores in ecosystems throughout the Neotropics. Rather than directly consuming the fresh foliar biomass they harvest, these ants use it to cultivate specialized fungus gardens. Although recent investigations have shed light on how plant biomass is degraded in fungus gardens, the cycling of nutrients that takes place in these specialized microbial ecosystems is still not well understood. Here, using metametabolomics and metaproteomics techniques, we examine the dynamics of nutrient turnover and biosynthesis in these gardens. Our results reveal that numerous free amino acids and sugars are depleted throughout the process of biomass degradation, indicating that easily accessible nutrients from plant material are readily consumed by microbes in these ecosystems. Accumulation of cellobiose and lignin derivatives near the end of the degradation process is consistent with previous findings of cellulases and laccases produced by Leucoagaricus gongylophorus, the fungus cultivated by leaf-cutter ants. Our results also suggest that ureides may be an important source of nitrogen in fungus gardens, especially during nitrogen-limiting conditions. No free arginine was detected in our metametabolomics experiments despite evidence that the host ants cannot produce this amino acid, suggesting that biosynthesis of this metabolite may be tightly regulated in the fungus garden. These results provide new insights into the dynamics of nutrient cycling that underlie this important ant-fungus symbiosis.

Environmental Molecular Sciences Laboratory↗

Effects of inoculants on the fermentation characteristics and in vitro digestibility of reed canary grass ( Phalaris arundinacea L.) silage on the Qinghai‐Tibetan Plateau

Abstract To effectively use local available grass resources to cover the winter feed shortage on the Qinghai‐Tibetan Plateau, direct‐cut and wilted reed canary grass (RCG) silages were prepared by using a rolled‐bale system, and their ensiling characteristics and in vitro digestibility were studied. Silages were treated without (control) or with inoculants including LP ( Lactobacillus plantarum ), LPLB ( L. plantarum , L. buchneri ), and LPLBc ( L. plantarum , L. buchneri , and cellulase), and were stored at ambient temperature (5.7–14.6°C) for 90 days. Compared with control, the inoculated silages increased ( p < .05) lactic acid and acetic acid contents, and reduced ( p < .05) final pH value and ammonia‐N ratio of total N. The highest WSC content (41.2 g/kg DM) occurred for LPLB‐inoculated silage, whereas LPLBc‐treated silage displayed the lowest contents of NDF (522.9 g/kg DM) and ADF (275.5 g/kg DM). In addition, LPLBc‐inoculated silage had the highest in vitro gas production (51.0 ml/g DM), in vitro DM digestibility (619.3 g/kg DM), and metabolic energy (9.6 kJ/kg DM). These results confirmed that treatments with inoculants at ensiling could improve silage fermentation and in vitro digestibility of RCG, and this could be a potential winter feed for animals on the Qinghai‐Tibetan Plateau.

Chen, Liangyin↗

The obligate alkalophilic soda‐lake fungus Sodiomyces alkalinus has shifted to a protein diet

Abstract Sodiomyces alkalinus is one of the very few alkalophilic fungi, adapted to grow optimally at high pH . It is widely distributed at the plant‐deprived edges of extremely alkaline lakes and locally abundant. We sequenced the genome of S. alkalinus and reconstructed evolution of catabolic enzymes, using a phylogenomic comparison. We found that the genome of S. alkalinus is larger, but its predicted proteome is smaller and heavily depleted of both plant‐degrading enzymes and proteinases, when compared to its closest plant‐pathogenic relatives. Interestingly, despite overall losses, S. alkalinus has retained many proteinases families and acquired bacterial cell wall‐degrading enzymes, some of them via horizontal gene transfer from bacteria. This fungus has very potent proteolytic activity at high pH values, but slowly induced low activity of cellulases and hemicellulases. Our experimental and in silico data suggest that plant biomass, a common food source for most fungi, is not a preferred substrate for S. alkalinus in its natural environment. We conclude that the fungus has abandoned the ancestral plant‐based diet and has become specialized in a more protein‐rich food, abundantly available in soda lakes in the form of prokaryotes and small crustaceans.

59 BASIC BIOLOGICAL SCIENCES↗