Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CATALYSTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Quinone-mediated electrochemical O2 reduction accessing high power density with an off-electrode heterogeneous catalyst

New methods for interconversion of electrical and chemical energy are crucial to address emerging challenges in renewable energy storage and conversion. Dissolved redox mediators provide an effective means to transport electrons (and protons) between an electrode and catalysts that are not in direct physical contact with an electrode. Mediators are widely implemented in biofuel cells, but such devices typically exhibit low power densities. Here, we report the development of a tetrasubstituted quinone mediator that exhibits excellent stability under strongly acidic conditions and supports electrochemical reduction of O2 at an off-electrode heterogeneous cobalt catalyst contained within a packed-bed reactor. Efficient oxidation of the hydroquinone by O2 in the reactor provides the basis for mediator regeneration, and an integrated “flow cathode” system supports high fuel-cell power densities. These results establish the combination of organic mediators with off-electrode heterogeneous catalysts as a versatile platform for development of new electrode-driven chemical redox transformations.

Preger, Yuliya↗

Palladized cells as suspension catalyst and electrochemical catalyst for reductively degrading aromatics contaminants: Roles of Pd size and distribution

The palladized cell (Pd-cell) could be used as an efficient catalyst in catalyzing the degradations of a wide variety of environmental contaminants. Nevertheless, when the Pd NPs associate with the bacteria, the catalytic activity likely significantly affected by the biomass. Quantitative indicators that characterize of Pd-cell are necessary and little attention has been paid to investigate how the catalytic efficiency of Pd-cell is affected by the size and distribution of Pd NPs. To fill this gap, we explored the roles of the above-mentioned key factors on the performance of Pd-cell in catalyzing the degradations of two aromatic contaminants (nitrobenzene and p-chlorophenol) in two commonly used scenarios: (1) using Pd-cell as suspended catalyst in solution and (2) using Pd-cell as electrocatalyst directly coated on electrode. In scenario (1), the relationship of exposing area to Pd particle size and distribution factors was established. Based on theoretical estimation and catalytic performance analysis, the results indicated that adjusting the exposing area to a large value (9.3 ± 0.1 × 10 5 nm 2 mg -1 Pd) was extremely effective for improving the catalytic activity of Pd-cell used as a suspension catalyst. In scenario (2), our results showed that the best electrocatalytic performances were achieved on the electrode decorated with Pd-cells with the largest NP size (54.3 ± 16.4 nm), which exerted maximum electrochemical active surface area (10.6 m 2 g -1 ) as well as favorable conductivity. The coverage of deposited Pd NPs (>95%) on the cell surface played a crucial role in boosting the conductivity of biocatalyst, thus determining the possibility of Pd-cell as an efficient electrocatalyst. The findings of this study provide a guidance for the synthesis and application of Pd-cell, which enables the design of Pd-cell to be suitable for different catalysis systems with high catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Insights into Supported Subnanometer Catalysts Exposed to CO via Machine-Learning-Enabled Multiscale Modeling

Subnanometer catalysts offer high noble metal utilization and superior performance for several reactions. However, understanding their structures and properties on an atomic scale under working conditions is challenging due to the large configurational space. Here, we introduce an efficient multiscale framework to predict their stability exposed to an adsorbate. The framework integrates a comprehensive toolset including density functional theory (DFT) calculations, cluster expansion, machine learning, and structure optimization. The end-to-end machine-learning workflow guides DFT data generation and enables significant computational acceleration. We demonstrate the approach for CO-adsorbed Pdn (n = 1–55) clusters on CeO 2 (111). Simulation results reveal that CO can facilitate restructuring by stabilizing smaller planar structures and bilayer structures of specific intermediate sizes, consistent with experimental reports. Metal–support interactions, preferential CO adsorption, and metal nuclearity and structure control catalyst stability. As a result, the framework allows automatic discovery of stable catalyst structures and a systematic strategy to exploit properties in the subnanometer scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Covalent Functionalization of Silicon with Plasma-Grown “Fuzzy” Graphene: Robust Aqueous Photoelectrodes for CO 2 Reduction by Molecular Catalysts

Carbon electrodes are ideal for electrochemistry with molecular catalysts, exhibiting facile charge transfer and good stability. Yet for solar-driven catalysis with semiconductor light absorbers, stable semiconductor/carbon interfaces can be difficult to achieve, and carbon’s high optical extinction means it can only be used in ultrathin layers. Here, we demonstrate a plasma-enhanced chemical vapor deposition process that achieves well-controlled deposition of out-of-plane “fuzzy” graphene (FG) on thermally oxidized Si substrates. The resulting Si|FG interfaces possess a silicon oxycarbide (SiOC) interfacial layer, implying covalent bonding between Si and the FG film that is consistent with the mechanical robustness observed from the films. The FG layer is uniform and tunable in thickness and optical transparency by deposition time. Using p-type Si|FG substrates, noncovalent immobilization of cobalt phthalocyanine (CoPc) molecular catalysts was employed for the photoelectrochemical reduction of CO 2 in aqueous solution. The Si|FG|CoPc photocathodes exhibited good catalytic activity, yielding a current density of ∼1 mA/cm 2 , Faradaic efficiency for CO of ∼70% (balance H 2 ), and stable photocurrent for at least 30 h at −1.5 V vs Ag/AgCl under 1-sun illumination. Furthermore, the results suggest that plasma-deposited FG is a robust carbon electrode for molecular catalysts and suitable for further development of aqueous-stable Si photocathodes for CO 2 reduction.

CO2 reduction↗

Calculations of CO Oxidation over a Au/TiO 2 Catalyst: A Study of Active Sites, Catalyst Deactivation, and Moisture Effects

The reaction mechanism of CO oxidation on Au/TiO 2 catalysts remains elusive. Here, we employ density functional theory calculations to gain an understanding of several important aspects of the system, including CO adsorption, the active oxygen species, catalyst deactivation, and the promoting effect of moisture on catalytic activity. Distinct from previous theoretical studies, which tend to address these questions individually, here we construct a model of the catalytic system which can address all of the issues mentioned. For this, we have considered the complex interactions among reactants, products, and catalysts under reaction conditions. The main findings of our present study are (1) the Au/TiO 2 interface boundary can be easily oxidized, (2) CO adsorption on oxidized Au results in the formation of O–Au–CO species, (3) surface lattice oxygen on a TiO 2 support is the active oxygen species, (4) CO 2 binds strongly on the O top /Ti 5c site, forming carbonate that blocks the active site, and finally (5) water can accelerate O 2 dissociation and carbonate decomposition. The results of our theoretical model are compared with existing experimental observations and found to be largely consistent with them.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding the Electronic Structure of 4d Metal Complexes: From Molecular Spinors to L-Edge Spectra of a di-Ru Catalyst

L{sub 2,3}-edge X-ray absorption spectroscopy (XAS) has demonstrated unique capabilities for the analysis of the electronic structure of di-Ru complexes such as the blue dimer cis,cis-[Ru{sub 2}{sup III}O(H{sub 2}O){sub 2}(bpy){sub 4}]{sup 4+} water oxidation catalyst. Spectra of the blue dimer and the monomeric [Ru(NH{sub 3}){sub 6}]{sup 3+} model complex show considerably different splitting of the Ru L{sub 2,3} absorption edge, which reflects changes in the relative energies of the Ru 4d orbitals caused by hybridization with a bridging ligand and spin-orbit coupling effects. To aid the interpretation of spectroscopic data, we developed a new approach, which computes L{sub 2,3}-edges XAS spectra as dipole transitions between molecular spinors of 4d transition metal complexes. This allows for careful inclusion of the spin-orbit coupling effects and the hybridization of the Ru 4d and ligand orbitals. The obtained theoretical Ru L{sub 2,3}-edge spectra are in close agreement with experiment. Critically, existing single-electron methods (FEFF, FDMNES) broadly used to simulate XAS could not reproduce the experimental Ru L-edge spectra for the [Ru(NH{sub 3}){sub 6}]{sup 3+} model complex nor for the blue dimer, while charge transfer multiplet (CTM) calculations were not applicable due to the complexity and low symmetry of the blue dimer water oxidation catalyst. We demonstrated that L-edge spectroscopy is informative for analysis of bridging metal complexes. The developed computational approach enhances L-edge spectroscopy as a tool for analysis of the electronic structures of complexes, materials, catalysts, and reactive intermediates with 4d transition metals.

Alperovich, Igor↗

Combining CO 2 reduction with propane oxidative dehydrogenation over bimetallic catalysts

In this paper, the inherent variability and insufficiencies in the co-production of propylene from steam crackers has raised concerns regarding the global propylene production gap and has directed industry to develop more on-purpose propylene technologies. The oxidative dehydrogenation of propane by CO 2 (CO 2 -ODHP) can potentially fill this gap while consuming a greenhouse gas. Non-precious FeNi and precious NiPt catalysts supported on CeO 2 have been identified as promising catalysts for CO 2 -ODHP and dry reforming, respectively, in flow reactor studies conducted at 823 K. In-situ X-ray absorption spectroscopy measurements revealed the oxidation states of metals under reaction conditions and density functional theory calculations were utilized to identify the most favorable reaction pathways over the two types of catalysts.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modulating the dynamics of Brønsted acid sites on PtWOx inverse catalyst

Here metal-metal oxide (M-MO) inverse catalysts are broadly applied. Brønsted acid sites on the oxide overlayers are often hypothesized to drive selective C-O bond activation. However, the Brønsted acid site nature and dynamics under working conditions remain poorly understood due to multiple materials functionalities. Here, we investigate the formation and the dynamics of Brønsted acid and redox sites on PtWO x /C under working conditions. DFT-based thermodynamic calculations and microkinetic modeling reveal a complex interplay between Brønsted acid and redox sites and potentially fast catalyst dynamics at comparable time scales to the chemistry. Combining in situ characterization and probe chemistry, we demonstrate that the density of Brønsted acid sites on the PtWO x /C inverse catalyst could be modulated by up to two orders of magnitude by altering the reaction parameters and by the chemistry itself. We elicit an order of magnitude increase in the acid-catalyzed dehydration average reaction rate by periodic hydrogen pulsing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Proton management as a design principle for hydrogenase-inspired catalysts

The properties of the hydrogenase-inspired [Ni(PNP)2]2+ (PNP ¼ Et2PCH2NMeCH2PEt2) catalyst for homogeneous hydrogen oxidation in acetonitrile solution are explored from a theoretical perspective for hydrogen production. The defining characteristic of this catalyst is the presence of pendent bases in the second coordination sphere that function as proton relays between the solution and the metal center. DFT calculations of the possible intermediates along proposed catalytic pathways are carried out and used to construct coupled Pourbaix diagrams of the redox processes and free-energy profiles along the reaction pathways. Analysis of the coupled Pourbaix diagrams reveals insights into the intermediate species and the mechanisms favored at different pH values of the solution. Consideration of the acid-base behavior of the metal hydride and H2 adduct species imposes additional constraints on the reaction mechanism, which can involve intramolecular as well as intermolecular proton-coupled electron-transfer steps. The efficacy of the catalyst is shown to depend critically on the pKa values of these potential intermediates, as they control both the species in solution at a given pH and the freeenergy profile of reaction pathways. Optimal relationships among these pKa values can be identified, and it is demonstrated that ‘‘proton management’’, i.e., the manipulation of these pKa values (e.g., through choice of metal or substituents on ligands), can serve as a design principle for improved catalytic behavior. This material is based upon work supported as part of the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the US Department of Energy, Office of Science, Office of Basic Energy Sciences.

Small, Yolanda A↗

Hydrophenylation of ethylene using a cationic Ru( ii ) catalyst: comparison to a neutral Ru( ii ) catalyst

Charge neutral Ru(II) complexes of the type TpRu(L)(NCMe)Ph [Tp = hydridotris(pyrazolyl)borate; L = CO, PMe 3 , P(OCH 2 ) 3 CEt] have been previously reported to catalyze the hydrophenylation of ethylene (Organometallics 2012, 31, 6851-6860). Yet, catalyst longevity for the TpRu(L)(NCMe)Ph complexes is inhibited by competitive ethylene C–H activation. For example, ethylene C–H activation limits catalysis using TpRu(P(OCH 2 ) 3 CEt)(NCMe)Ph to a maximum of 20 turnover numbers for conversion of benzene and ethylene to ethylbenzene. In contrast, reaction of the cationic Ru(II) complex [(HC(pz 5 ) 3 )Ru(P(OCH 2 ) 3 CEt)(NCMe)Ph][BAr' 4 ] [HC(pz 5 ) 3 = tris(5-methyl-pyrazolyl)methane; BAr' 4 = tetrakis[3,5-bis(trifluoromethyl)phenyl]borate] (0.025 mol% relative to benzene) in benzene with C 2 H 4 (15 psi) at 90 °C gives 565 turnover numbers of ethylbenzene after 131 hours. The production of 565 turnovers of ethylbenzene corresponds to an approximate one-pass 95% yield with ethylene is the limiting reagent and is a 28-fold improvement compared to the charge neutral catalyst TpRu(P(OCH 2 ) 3 CEt)(NCMe)Ph. Under identical conditions, the activity of [(HC(pz 5 ) 3 )Ru(P(OCH 2 ) 3 CEt)(NCMe)Ph][BAr' 4 ] is only 1.3 times less than TpRu(P(OCH 2 ) 3 CEt)(NCMe)Ph, but the increased stability of the cationic Ru(II) catalyst allows reactivity at much higher temperatures (up to 175 °C) and significantly enhanced rates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rate enhancement by Cu in NixCu1-x/ZrO2 bimetallic catalysts for hydrodeoxygenation of stearic acid

Hydrodeoxygenation of stearic acid on Ni/ZrO2 to n-heptadecane occurs via the reduction of stearic acid to octadecanal, followed by decarbonylation of the aldehyde to n-heptadecane. Stearic acid binds stronger than 1-octadecanal on Ni, causing decarbonylation to start only once stearic acid is almost fully converted. The rate of reduction of stearic acid to octadecanal is enhanced by addition of Cu either in the form of Cu/ZrO2 or in the form of a ZrO2 supported NixCu1-x nano-alloy. Cu has not only a higher activity for the reduction of stearic acid, it also increases the activity of Ni for decarbonylation of 1-octadecanal by increasing the electron density of Ni in the bimetal catalyst. The combination of these two effects causes the high activity of Ni-Cu bimetallic catalysts.

Denk, Christoph↗