Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BOLOMETER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

Solar radio emission at 1.2 mm wavelength.

A 36-ft radio telescope was used in the investigations. The 1.2 mm wavelength receiver connected to the telescope is a helium-cooled germanium bolometer. The 1.2 mm solar maps were obtained by scanning the sun in right ascension at the rate of 1 deg per minute. A temperature of 6000 K was assumed for the 1.2 mm quiet sun temperature for all solar maps. Eight maps at 1.2 mm were obtained on six different days. The 1.2 mm regions are rather large and without much structure; they are closely associated with Ca-plage regions.

Kundu, M. R.↗
NASA NTRS1972

Measurements of the energy exchange between earth and space from satellites during the 1960's

The net radiation budget of the earth-atmosphere system can be obtained from satellite measurements of the infrared radiant emittance and reflected and scattered solar radiation along with a knowledge of the solar constant. During the 1960's experimental and operational meteorological satellites carrying thermistor bolometer sensors were in orbit for about 60 months. Results from these measurements are given including: a global planetary albedo of 30%, long-term global radiation balance within measurement accuracy (2-3%), the net equator-to-pole radiation gradients that drive our atmospheric and oceanic circulations, as well as selected measurements of radiation budget terms over particular geographical areas.

Vonderhaar, T. H.↗
NASA NTRS1972

Far-infrared brightness temperatures of the planets.

An airborne telescope operating in an altitude range from 45,000 to 50,000 feet together with a low-temperature germanium bolometer and six cooled filters were used in an investigation of the temperatures of the planets. The measurements conducted provide a basis for absolute calibration in the far infrared, confirm the high effective temperature and internal power of Jupiter, and give information on the far-infrared opacities and emissivities of the four bright planets.

Armstrong, K. R.↗
NASA NTRS1974

Research on infrared astrophysics and X ray and XUV astronomy

The infrared research was divided into two related subjects, observations at wavelengths less than 34 microns and millimeter wavelength observations. A new complex of infrared sources in the Orion Nebula observed along with a broad range of galactic and extragalactic objects. The Comet Kohoutek was measured in the 1-20 micron wavelength region and its thermal properties agreed closely with those of Comet Ikeya-Seki. Combined infrared and photoelectric studies of the Makarian galaxies showed them to have a composite spectrum with a large emission feature in the far infrared. The development of one millimeter photometry and composited bolometers is described. A technique of reconstructing two dimensional surface brightness distributions with appropriate errors from individual strip scans was developed. Model parameters were determined by fitting data in non-linear systems. Results show spectral parameter uncertainties are underestimated or incorrectly evaluated in most studies.

Source record↗
NASA NTRS1973

Observation of the J = 2 to J = 1 transition of interstellar CO at 1.3 millimeters

The NRAO 36-foot antenna at Kitt Peak with a novel type of millimeter-wave superheterodyne receiver was used in observations of 1.3-mm line interstellar radiation due to J ? 2-1 transitions of C(12)0(16) and C(13)0(16). The liquid-helium-cooled hot-electron bolometer mixer of the superheterodyne receiver was used as the detecting element. The Orion Nebula CO system was found to be thermalized, showing a peak excitation temperature of about 76 K.

Phillips, T. G.↗
NASA NTRS1974

Sky survey at far infrared wavelengths using a balloon-borne telescope

Localized sources of far infrared radiation (approximately 50 microns) have been detected during a high altitude balloon flight with a 40 cm telescope and silicon detectors. The flight system is described and preliminary results are presented. A large area of the sky has been scanned for localized sources of far infrared radiation, using a balloon-borne system that was sensitive to wavelengths beyond about 55 microns. Two Molectron silicon bolometers were used, with a Newtonian telescope having a 40 cm primary. The telescope was driven in azimuth at a fixed elevation; this mode of scanning was carried out for the duration of each of two balloon flights. The flight system is described.

Friedlander, M. W.↗
NASA NTRS1975

Astronomy at sub-millimeter wavelengths

The first flight test of a gondola containing a Newtonian telescope with a 16 in. primary mirror is described. Bolometer tests were conducted along with gondola design studies, and changes were made in the mechanical system as a result. Parts of the system were rebuilt and tested, and it was found that the flight system had redundant data recording capabilities. In the total flight record, about 160 large signals were noted; about half of these appeared to have the correct shape for genuine signals, and the other were clearly noise spikes (they were large but the signal shape could not have been produced by the observation of a celestial object).

Friedlander, M. W.↗
NASA NTRS1974

A stabilized large-aperture far-infrared telescope gondola

Description of a recently developed balloon-borne 1-m far-infrared telescope designed to carry out astronomical observations and to map radiation from selected areas of the sky. The telescope optical system consists of a conventional Cassegrain arrangement with an f/2 aluminum primary mirror, spherically figured, which feeds a pyrex secondary mirror to produce an f/13.8 beam at the focal plane with a scale of 15.2 arc sec/mm. Three focal planes are provided. The infrared detectors consist of an array of four gallium-doped germanium bolometers fitted within a two-liter helium dewar. An altitude-azimuth mount design is used for attitude control, with the pointing objectives being achieved in two steps. The azimuth control system is capable of operation in a position mode, in which the sensing element is a servo-driven null magnetometer always pointed north, and in an inertial mode, in which the gyro is uncaged and becomes the azimuth reference. The elevation system also operates in both position and inertial modes. An auxiliary position control, powered by an independent battery and controlled by a separate tone command system, is provided in case of a primary system difficulty.

Hazen, N. L.↗
NASA NTRS1974

Balloon-based measurements of the cosmic background radiation

A balloon-borne liquid-helium-cooled spectrometer was developed and flown to measure the cosmic background radiation in the 3- to 18-per-cm region. It features a cooled horn antenna, a polarizing Michelson interferometer, and a germanium bolometer. These design features and the performance of the instrument are discussed.

Mather, J. C.↗
NASA NTRS1975

A sensitive far infrared detection system

An infrared field optics system was designed which achieves the maximum flux concentration allowed by the Abbe sine inequality and provides efficient coupling to bolometer-type detectors.

Hildebrand, R. H.↗
NASA NTRS1976

Heat trap - An optimized far infrared field optics system

The article deals with the design and performance of a heat trap IR system designed to maximize the concentration and efficient reception of far IR and submillimeter wavelength radiation. The test object is assumed to be extended and/or viewed at wavelengths much longer than the detector, and the entrance aperture is limited to the size of the telescope Airy diffraction disk. The design of lenses, cavity, bolometers, light collectors, and mirrors for the system is discussed. Advantages and feasibility of arrays of heat traps are considered. Beam patterns, flux concentration, and performance variation with wavelength are dealt with. The heat trap is recommended for sensing all types of far IR sources and particularly for extended far IR sources.-

Harper, D. A.↗
NASA NTRS1977

Far infrared observations of IRC + 10216

Results are reported for measurements of IRC + 10216 at 100 microns made with the 91-cm telescope of NASA's Kuiper Airborne Infrared Observatory. The IR photometer employed consisted of a gallium-doped germanium photoconductive detector with a MOSFET preamplifier and load resistor. Signals obtained from the source at modulation frequencies of 30 and 100 Hz are plotted, and the 100-micron flux measurements are shown to be in agreement with previous bolometric measurements. It is noted that the sensitivity of the photoconductive detection system is comparable to that of the conventional bolometers that have been used in airborne IR observations.

Shivanandan, K.↗
NASA NTRS1977

Detection of long wavelength infrared at moderate temperatures

Technical approaches for the advanced development of 8-12 micrometer detectors operating at elevated temperatures were defined. The theoretical limits to performance of 8-12 micrometer quantum detectors (photoconductive and photovoltaic) and thermal detectors (pyroelectrics, bolometers etc). An analytic model of signal and noise in both quantum detectors and pyroelectric detectors was developed and candidate materials for both detector types were identified and examined. The present status of both quantum and thermal detectors was assessed as well as the parameters limiting operating temperature and detectivity. The areas of research and development likely to lead to detector performance near the theoretical limit are identified.

Tredwell, T. J.↗
NASA NTRS1979

Infrared receivers for low background astronomy: Incoherent detectors and coherent devices from one micrometer to one millimeter

The status of incoherent detectors and coherent receivers over the infrared wavelength range from one micrometer to one millimeter is described. General principles of infrared receivers are included, and photon detectors, bolometers, coherent receivers, and important supporting technologies are discussed, with emphasis on their suitability for low background astronomical applications. Broad recommendations are presented and specific opportunities are identified for development of improved devices.

Boggess, N. W.↗
NASA NTRS1979

A linear scanning balloon-borne telescope for far-infrared astronomy

A low-background balloon-borne far-infrared (30-300 microns) telescope, utilizing a linear scan mode has dramatically increased the efficiency of mapping large extended areas over more conventional systems. The system consists of a 20 cm linear scanned mirror mounted as an off-axis (Herchelian) telescope designed to achieve an emissivity of 1% or less, a ten position cooled aperture-filter wheel, a cooled Pfund optical system with a composite diamond-germanium bolometer mounted in a spherical cavity, a minimum phase shift ultra-low frequency amplifier, and a 4 micron thick mylar dewar window. This system was used to produce detailed far-infrared maps of the galactic plane. The system specifications and operating parameters will be discussed and preliminary data shown.

Nishimura, T.↗
NASA NTRS1979

A cryogenically-cooled, balloon-borne far infrared survey telescope

The design and performance of the Arizona cryogenically-cooled, balloon-borne, multiband far infrared survey telescope are described. The 40 cm Cassegrain telescope is completely contained in a liquid helium dewar. The focal plane array consists of Fabry optics and four detectors which each have a 12 arc minute field of view. Both photoconductive and bolometer detectors are utilized at effective wavelengths of 20, 80, 100 and 150 microns. In 1977 the telescope was used to make multicolor large scale maps of 70 square degrees in the Cygnus X region and the W3 region.

Campbell, M. F.↗
NASA NTRS1980

Far infrared heterodyne systems

Three far infrared detectors, the InSb hot electron bolometer, the GaAs Schottky diode and the Josephson point contact junction, were incorporated as mixers into sensitive heterodyne systems. The performances of existing heterodyne receivers/radiometers using these detectors are described and compared. Other applications of submillimeter heterodyne techniques are discussed.

Tannenwald, P. E.↗
NASA NTRS1979

The IR energy distribution of SS433

The infrared energy distribution of the emission-line object SS 433 in the range 1 to 10 microns is determined. Photometric measurements were made with a 2.2-m telescope using an InSb detector and a 6-arcsec diaphragm for 1.2- to 4.8-micron observations and a gallium-doped germanium bolometer with a 6-arcsec diaphragm for 8- to 13-micron observations. Results indicate the presence of substantial night-to-night flux density and color variations, and a decrease in flux density at wavelengths greater than 5 microns. The energy cut-off is used to estimate a physical size of 1 AU for the emitting region and an electron density of 10 to the 11th/cu cm on the basis of a model of reddened free-free emission from an ionized plasma, with self-absorption of radiation over 5 microns. The greater variability observed at longer wavelengths is also interpreted in terms of this model.

Wynn-Williams, C. G.↗