Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Alert”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

ACES M and S: Unmitigated Factorial Encounter Study on DAA/TCAS Interoperability

Realization of the expected proliferation of Unmanned Aircraft System (UAS) operations in the National Airspace System (NAS) depends on the development and validation of standards for UAS Detect and Avoid (DAA) Systems. The RTCA Special Committee 228 is charged with leading the development of draft Minimum Operational Performance Standards (MOPS) for UAS DAA Systems. NASA, as a participating member of RTCA SC-228 is committed to supporting the development and validation of draft requirements for DAA alerting and guidance systems. This presentation contains the results of two combinatorial encounter analysis studies using NASA's SAA Control fast-time simulation capability for this purpose. In these studies, encounters between two aircraft were simulated one at a time for the full factorial combination of encounter geometries (e.g., encounter angle, CPA offset) and aircraft performance (e.g., ownership and intruder ground speeds and vertical rates). The first study analyzes the relationships (e.g., timeline) between the different alerting-safety regions in the SC-228 MOPS (in order of increasing severity): 1) DAA warning alert, 2) well clear recovery (WCR) guidance, 3) DAA-Collision Avoidance (CA), and 4) TCAS RA. This study will focus primarily on encounter situations in which TCAS RA occurs prior to any of the other alerting-safety boundaries. In particular, this study will investigate whether using vertical distance or vertical distance at closest point of approach (i.e., vertical miss distance or VMD) is more appropriate for the definition of the DAA-CA region. In addition, cases where transitions between different regions skip an intermediate region will be analyzed. The second study in this presentation explores a proposal to use an altitude rate error threshold to determine if vertical maneuvers are acceptable for DAA WCR guidance against non-cooperative intruders. This study incorporates the radar from the Honeywell sensor model and examines a series of pairwise encounters between a non-cooperative intruder and a UAS ownship, with different combinations of intruder states and ownship performance levels. The study uses SAA Control as a simulation platform and pilot model, and Omnibands to provide DWC recovery guidance. Two simulation sets, one that allows vertical DWC recovery guidance and one that does not, are compared to determine if encounters with altitude rate errors above 250 feet-per-minute are more likely to have more severe losses of well clear, as determined by the Loss of Well-Clear Severity metric.

SaaControl↗

DAIDALUS Observations From UAS Integration in the NAS Project Flight Test 4

In order to validate the Unmanned Aerial System (UAS) Detect-and-Avoid (DAA) solution proposed by standards body RTCA Inc., the National Aeronautics and Space Administration (NASA) UAS Integration in the NAS project, alongside industry members General Atomics and Honeywell, conducted the fourth flight test in a series at Armstrong Flight Research Center in Edwards, California. Flight Test 4 (FT4) investigated problems of interoperability with the TCAS collision avoidance system with a DAA system as well as problems associated with sensor uncertainty. A series of scripted flight encounters between the NASA Ikhana UAS and various "intruder" aircraft were flown while alerting and guidance from the DAA algorithm were recorded to investigate the timeliness of the alerts and correctness of the guidance triggered by the DAA system. The results found that alerts were triggered in a timely manner in most instances. Cases where the alerting and guidance was incorrect were investigated further.

Vincent, Michael J.↗

Unmanned Aircraft Systems Minimum Operations Performance Standards End-to-End Verification and Validation (E2-V2) Simulation

As Unmanned Aircraft Systems (UAS) make their way to mainstream aviation operations within the National Airspace System (NAS), research efforts are underway to develop a safe and effective environment for their integration into the NAS. Detect and Avoid (DAA) systems are required to account for the lack of "eyes in the sky" due to having no human on-board the aircraft. The current NAS relies on pilot's vigilance and judgement to remain Well Clear (CFR 14 91.113) of other aircraft. RTCA SC-228 has defined DAA Well Clear (DAAWC) to provide a quantified Well Clear volume to allow systems to be designed and measured against. Extended research efforts have been conducted to understand and quantify system requirements needed to support a UAS pilot's ability to remain well clear of other aircraft. The efforts have included developing and testing sensor, algorithm, alerting, and display requirements. More recently, sensor uncertainty and uncertainty mitigation strategies have been evaluated. This paper discusses results and lessons learned from an End-to-End Verification and Validation (E2-V2) simulation study of a DAA system representative of RTCA SC-228's proposed Phase I DAA Minimum Operational Performance Standards (MOPS). NASA Langley Research Center (LaRC) was called upon to develop a system that evaluates a specific set of encounters, in a variety of geometries, with end-to-end DAA functionality including the use of sensor and tracker models, a sensor uncertainty mitigation model, DAA algorithmic guidance in both vertical and horizontal maneuvering, and a pilot model which maneuvers the ownship aircraft to remain well clear from intruder aircraft, having received collective input from the previous modules of the system. LaRC developed a functioning batch simulation and added a sensor/tracker model from the Federal Aviation Administration (FAA) William J. Hughes Technical Center, an in-house developed sensor uncertainty mitigation strategy, and implemented a pilot model similar to one from the Massachusetts Institute of Technology's Lincoln Laboratory (MIT/LL). The resulting simulation provides the following key parameters, among others, to evaluate the effectiveness of the MOPS DAA system: severity of loss of well clear (SLoWC), alert scoring, and number of increasing alerts (alert jitter). The technique, results, and lessons learned from a detailed examination of DAA system performance over specific test vectors and encounter cases during the simulation experiment will be presented in this paper.

Ghatas, Rania W.↗

An Interoperability Concept for Detect and Avoid and Collision Avoidance Systems: Results from a Human-In-The-Loop Simulation

The integration of Unmanned Aircraft Systems (UAS) into the National Airspace System (NAS) poses a variety of technical challenges to UAS developers and aviation regulators. In response to growing demand for access to civil airspace in the United States, the Federal Aviation Administration (FAA) has produced a roadmap identifying key areas requiring further research and development. One such technical challenge is the development of a "detect and avoid" system (DAA) capable of providing a means of compliance with the "see and avoid" requirement in manned aviation. The purpose of the DAA system is to support the pilot, situated at a ground control station (GCS), in maintaining "DAA well clear" of nearby aircraft through the use of GCS displays and alerts. In addition to its primary function of aiding the pilot in maintaining well clear, the DAA system must also safely interoperate with existing NAS systems and operations, such as the airspace management procedures of air traffic controllers (ATC) and Collision Avoidance (CA) systems currently in use by manned aircraft, namely the Traffic alert and Collision Avoidance System (TCAS) II. It is anticipated that many UAS architectures will integrate both a DAA system and a TCAS II. It is therefore necessary to explicitly study the integration of DAA and TCAS II alerting structures and maneuver guidance formats to ensure that pilots understand the appropriate type and urgency of their response to the various alerts. This paper presents a concept of interoperability for the two systems. The concept was developed with the goal of avoiding any negative impact on the performance level of TCAS II while retaining a DAA system that still effectively enables pilots to maintain DAA well clear.

unmanned aircraft systems↗

En Route Detect and Avoid Well Clear in Terminal Area Landing Pattern

A fast time simulation was conducted to test the detect and avoid Well Clear definition designed for en route use when an unmanned aircraft (UA) is approaching the landing pattern of the terminal area. Measures focused on were loss of well clear and alerts intended to help the pilot avoid loss of well clear. Data indicated warning-level alerts will occur outside the typical Class D airspace which may prevent the UA from normal operations in the terminal airspace. Other aircraft on 45o entry could result in “nuisance” alerts which may also prevent the UA from normal operations in the terminal airspace. However, eliminating horizontal proximity (τmod) has the potential to increase “nuisance” alerts on the 45o entry and downwind legs. Overall, this suggests that a more stringent definition of Well Clear may be advisable in the landing pattern of the terminal area.

Trujillo, Anna C.↗

Pilot Evaluation of a UAS Detect-and-Avoid System's Effectiveness in Remaining Well Clear

Unmanned aircraft will equip with a detect-and-avoid (DAA) system that allows them to comply with the requirement to see and avoid other aircraft, an important layer in the overall set of procedural, strategic and tactical separation methods designed to prevent mid-air collisions. Although the effectiveness of the DAA system will be set to a minimum threshold by regulators, different combinations of algorithms, displays and procedures could be used to meet that minimum. The research presented in this paper indicates the effectiveness of the combined pilot-DAA system as a function of the DAA design requirements and provides data that may be used to model the behavior of pilots when employing such systems. Over the course of two simulations 21 professional UAS pilots evaluated eight different DAA system designs and metrics were collected on their ability to maintain the well clear separation standard. The independent variables were the time horizon at which pilots were alerted to potential losses of well clear, the location of the traffic display, and the tools and informational elements available on the display to aid the pilot in detecting and resolving those potential losses. In the second experiment the UAS encountered two categories of aircraft: those equipped with simulated transponders that could be seen dozens of miles away and those without that were only detectable by a simulated radar within a range of six nautical miles. The data indicate that integrating the traffic display with the primary mission map directly in front of the pilot reduced the frequency of losses of well clear. Improved detection and resolution tools, including explicit maneuver guidance and a trial planning capability, had less of an effect in reducing the frequency of losses but significantly reduced the time in loss when they occurred. The amount of warning time provided to the pilot had a strong effect on their ability to remain well clear: when alerts were first presented with less than about 15 seconds to a predicted loss of well clear pilots were able to maneuver successfully in only 26 percent of encounters, whereas they were about 83 percent successful when they had more than 15 seconds. Pilots' ability to separate from the two categories of aircraft was nearly the same after accounting for the amount of alert time provided in each encounter, although the limited surveillance volume for the non-transponder equipped aircraft meant alerts tended to occur later and therefore were more difficult to resolve.

loss of well clear↗

An Examination of Two Non-Cooperative Detect and Avoid Well Clear Definitions

NASA’s Unmanned Aircraft Systems Integration into the National Airspace System (UAS in the NAS) project examines the technical barriers associated with the operation of UAS in civil airspace. The present study explored the differential effects of two candidate non-cooperative Detect-and-Avoid Well Clear (DWC)definitions on pilot and system performance in a human-in-the-loop simulation. Active-duty UAS pilots were recruited to maintain DWC against representative Class 4 encounter types with a low size, weight, and power (SWaP) radar declaration range of 3.5 nautical miles (nmi). Objective performance indicated that pilots could consistently maintain DWC against non-cooperative intruders with either DWC candidate, with negligible differences in response times and separation performance against caution and warning-level threats. While losses of DWC were avoided at rates comparable to Phase 1 findings, pilots uploaded their responses to caution-level alerts over 5 seconds faster in the current setup relative to Phase 1. Encounters with faster closure rates were susceptible to shortened caution-level alert durations, especially when employing the DWC criterion with the additional ‘Tau’ (temporal) component. Consequently, caution-level threats frequently elevated to warning-level status (nearly twice as often with theTau candidate). The variable caution alert durations appeared to impact pilots’ coordination with air traffic control (ATC), as ATC approval rates were lower with the ‘Tau’and ‘Disc’ candidates relative to Phase 1 research. Ultimately, the increased alerting time enabled by the Disc candidate deemed it more suitable for any reductions to the assumed radar declaration range requirement, which was re-evaluated in a follow-on study. Findings from this study will inform Phase 2 Minimum Operational Performance Standards (MOPS)development for UAS with alternative surveillance equipment and performance capabilities.

Kevin J Monk↗

UAS Pilot Performance Comparisons with Different Low Size, Weight and Power Sensor Ranges

The present study evaluated the performance of UAS pilots under four simulated low size, weight, and power (SwaP) sensor ranges: 1.5nmi, 2.0nmi, 2.5nmi, and 3.0nmi. Nine active-duty UAS pilots responded to scripted DAA conflicts against non-cooperative intruders while flying a simulated RQ-7 Shadow at varied speeds along a pre-filed flight path in Class E airspace. Findings revealed a linear effect of sensor range on alerting time and separation performance, with nearly every DAA well clear (DWC) violation and all Near Mid-Air Collision (NMAC) events occurring below 2.5nmi. Response time differences at these reduced ranges were negligible due to the high frequency of warning-level alerts that require an immediate response. Since caution alert duration was truncated to some degree by each tested declaration range, pilots were often unable to coordinate their avoidance maneuvers with ATC prior to their uploads. Nonetheless, the 2.5nmi range allowed minimum alerting times that were sufficient for acceptable pilot performance. The study findings will inform DAA system requirements for UAS with alternative surveillance equipment and aircraft performance capabilities. Implications on DAA display and sensor requirements are discussed.

unmanned aircraft systems↗

UAS Pilot Performance Comparisons with Different Low Size, Weight and Power Sensor Ranges

The present study evaluated the performance of UAS pilots under four simulated low size, weight, and power (SwaP) sensor ranges: 1.5nmi, 2.0nmi, 2.5nmi, and 3.0nmi. Nine active-duty UAS pilots responded to scripted DAA conflicts against non-cooperative intruders while flying a simulated RQ-7 Shadow at varied speeds along a pre-filed flight path in Class E airspace. Findings revealed a linear effect of sensor range on alerting time and separation performance, with nearly every DAA well clear (DWC) violation and all Near Mid-Air Collision (NMAC) events occurring below 2.5nmi. Response time differences at these reduced ranges were negligible due to the high frequency of warning-level alerts that require an immediate response. Since caution alert duration was truncated to some degree by each tested declaration range, pilots were often unable to coordinate their avoidance maneuvers with ATC prior to their uploads. Nonetheless, the 2.5nmi range allowed minimum alerting times that were sufficient for acceptable pilot performance. These findings will inform DAA system requirements for UAS with alternative surveillance equipment and aircraft performance capabilities. Implications on DAA display and sensor requirements are discussed.

unmanned aircraft systems↗

UAS Pilot Performance Comparisons with Different Low Size, Weight and Power Sensor Ranges

The present study evaluated the performance of UAS pilots under four simulated low size, weight, and power (SwaP) sensor ranges: 1.5nmi, 2.0nmi, 2.5nmi, and 3.0nmi. Nine active-duty UAS pilots responded to scripted DAA conflicts against non-cooperative intruders while flying a simulated RQ-7 Shadow at varied speeds along a pre-filed flight path in Class E airspace. Findings revealed a linear effect of sensor range on alerting time and separation performance, with nearly every DAA well clear (DWC) violation and all Near Mid-Air Collision (NMAC) events occurring below 2.5nmi. Response time differences at these reduced ranges were negligible due to the high frequency of warning-level alerts that require an immediate response. Since caution alert duration was truncated to some degree by each tested declaration range, pilots were often unable to coordinate their avoidance maneuvers with ATC prior to their uploads. Nonetheless, the 2.5nmi range allowed minimum alerting times that were sufficient for acceptable pilot performance. These findings will inform DAA system requirements for UAS with alternative surveillance equipment and aircraft performance capabilities. Implications on DAA display and sensor requirements are discussed.

unmanned aircraft systems↗

Dynamic Ensemble Prediction of Cognitive Performance in Space

Astronauts are exposed to a unique set of stressors in spaceflight. Microgravity, isolation, confinement, and environmental and operational hazards: all of these can impact sleep, vigilant attention, and alertness, which are critical to mission success. In this paper, we seek to understand the most important predictors of alertness over the course of a space mission, using self-reported, cognitive, and environmental data collected from 24 astronauts on 6-month missions to the International Space Station (ISS). Alertness was repeatedly and objectively assessed on the ISS with a brief 3-minute Psychomotor Vigilance Test (PVT) that is highly sensitive to sleep deprivation. To relate PVT performance to time-varying and sparsely-measured environmental, operational, and psychological covariates, we propose a n ensemble prediction model comprising of linear mixed effects regression, random forest, and functional concurrent regression models. An extensive cross-validation procedure reveals that this ensemble outperforms any one of its components alone. We also discover that a participant’s past performance, reported fatigue and stress, and temperature and radiation exposure were among the most important variables associated with alertness. This method is broadly applicable to environmental studies where the main goal is accurate, individualized prediction involving a mixture of person-level traits and irregularly measured time series.

Danni Tu↗

Detect-and-Avoid Surveillance Range Requirements for Electro-Optical/Infra-Red Sensors

A detect-and-avoid (DAA) system provides surveillance, alerting, and maneuver guidance (referred to as guidance in this report) that are critical to an unmanned aircraft system’s (UAS) ability to maintain separation from manned aircraft and other unmanned aircraft. The last decade has seen significant progress in the development of DAA requirements, spearheaded by RTCA Special Committee 228 (SC228) and subsequently by other standards organizations such as EUROCAE and ASTM. SC-228’s development of DAA requirements assumes the UAS follows instrument flight rules (IFR) and has a remote pilot or operator in the loop. As of the publication of this document, the SC-228’s latest Minimum Operational Performance Standards (MOPS) for DAA, versioned as DO-365B [1], DAA systems use onboard and/or ground surveillance systems to detect traffic. The surveillance systems must detect both cooperative and non-cooperative air traffic. Cooperative traffic are vehicles that have a broadcasting transponder, while non-cooperative traffic do not, and so must be detected via radar or other sensors. A DAA system’s alerting and guidance functions alert the pilot/operator in the loop of potential hazards, such as intruder aircraft, and provide maneuver solutions which help the pilot/operator avoid or mitigate observed hazards. A UAS pilot is expected to coordinate with air traffic control (ATC) before executing a conflict avoidance maneuver if the type of alert is not urgent enough to require an immediate maneuver.

uncrewed aviation systems↗

Clinical Implementation of a Model-Based In Vivo Dose Verification System for Stereotactic Body Radiation Therapy–Volumetric Modulated Arc Therapy Treatments Using the Electronic Portal Imaging Device

Purpose: To report findings from an in vivo dosimetry program implemented for all stereotactic body radiation therapy patients over a 31-month period and discuss the value and challenges of utilizing in vivo electronic portal imaging device (EPID) dosimetry clinically. Methods and Materials: From December 2013 to July 2016, 117 stereotactic body radiation therapy–volumetric modulated arc therapy patients (100 lung, 15 spine, and 2 liver) underwent 602 EPID-based in vivo dose verification events. A developed model-based dose reconstruction algorithm calculates the 3-dimensional dose distribution to the patient by back-projecting the primary fluence measured by the EPID during treatment. The EPID frame-averaging was optimized in June 2015. For each treatment, a 3%/3-mm γ comparison between our EPID-derived dose and the Eclipse AcurosXB–predicted dose to the planning target volume (PTV) and the ≥20% isodose volume were performed. Alert levels were defined as γ pass rates <85% (lung and liver) and <80% (spine). Investigations were carried out for all fractions exceeding the alert level and were classified as follows: EPID-related, algorithmic, patient setup, anatomic change, or unknown/unidentified errors. Results: The percentages of fractions exceeding the alert levels were 22.6% for lung before frame-average optimization and 8.0% for lung, 20.0% for spine, and 10.0% for liver after frame-average optimization. Overall, mean (± standard deviation) planning target volume γ pass rates were 90.7% ± 9.2%, 87.0% ± 9.3%, and 91.2% ± 3.4% for the lung, spine, and liver patients, respectively. Conclusions: Results from the clinical implementation of our model-based in vivo dose verification method using on-treatment EPID images is reported. The method is demonstrated to be valuable for routine clinical use for verifying delivered dose as well as for detecting errors.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Caffeine increases striatal dopamine D 2 /D 3 receptor availability in the human brain

Caffeine, the most widely consumed psychoactive substance in the world, is used to promote wakefulness and enhance alertness. Like other wake-promoting drugs (stimulants and modafinil), caffeine enhances dopamine (DA) signaling in the brain, which it does predominantly by antagonizing adenosine A 2A receptors (A 2A R). However, it is unclear if caffeine, at the doses consumed by humans, increases DA release or whether it modulates the functions of postsynaptic DA receptors through its interaction with adenosine receptors, which modulate them. We used positron emission tomography and [ 11 C]raclopride (DA D 2 /D 3 receptor radioligand sensitive to endogenous DA) to assess if caffeine increased DA release in striatum in 20 healthy controls. Caffeine (300mg p.o.) significantly increased the availability of D 2 /D 3 receptors in putamen and ventral striatum, but not in caudate, when compared with placebo. In addition, caffeine-induced increases in D 2 /D 3 receptor availability in the ventral striatum were associated with caffeine-induced increases in alertness. Our findings indicate that in the human brain, caffeine, at doses typically consumed, increases the availability of DA D 2 /D 3 receptors, which indicates that caffeine does not increase DA in the striatum for this would have decreased D 2 /D 3 receptor availability. Instead, we interpret our findings to reflect an increase in D 2 /D 3 receptor levels in striatum with caffeine (or changes in affinity). Furthermore, the association between increases in D 2 /D 3 receptor availability in ventral striatum and alertness suggests that caffeine might enhance arousal, in part, by upregulating D 2 /D 3 receptors.

59 BASIC BIOLOGICAL SCIENCES↗

ATAT: Astronomical Transformer for time series and Tabular data

Context. The advent of next-generation survey instruments, such as theVera C. RubinObservatory and its Legacy Survey of Space and Time (LSST), is opening a window for new research in time-domain astronomy. The Extended LSST Astronomical Time-Series Classification Challenge (ELAsTiCC) was created to test the capacity of brokers to deal with a simulated LSST stream. Aims. Our aim is to develop a next-generation model for the classification of variable astronomical objects. We describe ATAT, the Astronomical Transformer for time series And Tabular data, a classification model conceived by the ALeRCE alert broker to classify light curves from next-generation alert streams. ATAT was tested in production during the first round of the ELAsTiCC campaigns. Methods. ATAT consists of two transformer models that encode light curves and features using novel time modulation and quantile feature tokenizer mechanisms, respectively. ATAT was trained on different combinations of light curves, metadata, and features calculated over the light curves. We compare ATAT against the current ALeRCE classifier, a balanced hierarchical random forest (BHRF) trained on human-engineered features derived from light curves and metadata. Results. When trained on light curves and metadata, ATAT achieves a macro F1 score of 82.9 ± 0.4 in 20 classes, outperforming the BHRF model trained on 429 features, which achieves a macro F1 score of 79.4 ± 0.1. Conclusions. The use of transformer multimodal architectures, combining light curves and tabular data, opens new possibilities for classifying alerts from a new generation of large etendue telescopes, such as theVera C. RubinObservatory, in real-world brokering scenarios.

Astronomy & Astrophysics↗

Optical follow-up observation for GW event S190510g using Subaru/Hyper Suprime-Cam

Abstract A gravitational wave event, S190510g, which was classified as a binary-neutron-star coalescence at the time of preliminary alert, was detected by LIGO/Virgo collaboration on 2019 May 10. At 1.7 hours after the issue of its preliminary alert, we started a target-of-opportunity imaging observation in the Y band to search for its optical counterpart using the Hyper Suprime-Cam (HSC) on the Subaru Telescope. The observation covers a 118.8 deg2 sky area corresponding to $11.6\%$ confidence in the localization skymap released in the preliminary alert and $1.2\%$ in the updated skymap. We divided the observed area into two fields based on the availability of HSC reference images. For the fields with the HSC reference images, we applied an image subtraction technique; for the fields without the HSC reference images, we sought individual HSC images by matching a catalog of observed objects with the PS1 catalog. The search depth is 22.28 mag in the former method and the limit of search depth is 21.3 mag in the latter method. Subsequently, we performed visual inspection and obtained 83 candidates using the former method and 50 candidates using the latter method. Since we only have the one-day photometric data, we evaluated the probability of candidates being located inside the 3D skymap by estimating their distances with photometry of associated extended objects. We found three candidates are likely located inside the 3D skymap and concluded they could be a counterpart of S190510g, while most of the 133 candidates were likely to be supernovae because the number density of candidates was consistent with the expected number of supernova detections. By comparing our observational depth with a light-curve model of such a kilonova reproducing AT2017gfo, we show that early deep observations with the Subaru/HSC can capture the rising phase of the blue component of a kilonova at the estimated distance of S190510g (∼230 Mpc).

79 ASTRONOMY AND ASTROPHYSICS↗

Hierarchical Clustering and Visualization of Aggregate Cyber Data

Most commercial intrusion detections systems (IDS) can produce a very high volume of alerts, and are typically plagued by a high false positive rate. The approach described here uses Splunk to aggregate IDS alerts. The aggregated IDS alerts are retrieved from Splunk programmatically and are then clustered using text analysis and visualized using a sunburst diagram to provide an additional understanding of the data. The equivalent of what the cluster analysis and visualization provides would require numerous detailed queries using Splunk and considerable manual effort.

Patton, Robert M↗

Monitoring Aqueous Reprocessing Systems for Detection of Facility Misuse

Traditional approaches to material control and accounting at used nuclear fuel reprocessing facilities relies in large part on laboratory-based destructive assay of periodic samples taken from key stages. These techniques are highly accurate, but limited inspection frequency may limit the size and operation of a reprocessing facility. Online monitoring techniques using inline detectors can be applied to fuel reprocessing systems to improve the situational awareness as the facility is operating to provide additional indicators of the evolving state of the facility between normal inspection periods, potentially alerting regulators to the need for additional inspection. The Multi-Isotope Process (MIP) Monitor combines medium-resolution gamma detectors with statistical data analysis techniques to monitor reprocessing systems for anomalous conditions resulting from process control issues or malfeasance. Gamma spectra collected from the H-Canyon reprocessing facility were modeled using principal component analysis to demonstrate the efficacy of the MIP Monitor for detecting notional diversion scenarios.

safeguards, nuclear fuel reprocessing, gamma spect↗