Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AUGMENTATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Lightfield Directing Array use for Augmented Reality

Lawrence Livermore National Laboratory has developed the Lightfield Directing Array (LDA), a highspeed, large range, precision micromirror array intended to provide combined beam-steering and adaptive optics on a single chip. Present MEMS devices are limited by their flexure design to low range-bandwidth and offer poor stability, so have seen limited use in high performance optics. We have solved this with advanced flexure and actuator design which can offer a >10x higher range-bandwidth product with closed loop integrated sensing for precision operation. The LDA provides new levels of performance for MEMS steered Augmented Reality (AR) driven imaging systems, including stable images, repeatable scanning, faster refresh rates, adaptive resolution and adjustable depth of focus.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Augmented Monitoring and Condition Assessment Program (AMCAP) - Proof-of-Principle (POP) Mockup for Non-Aluminum Spent Nuclear Fuel Container In-Situ Examinations

A disciplined engineering approach is being followed to develop an engineered system of tooling and sensors, characterization techniques, and deployment subsystems for in-situ inspection of the several container types used for the storage of non-aluminum spent nuclear fuel (NASNF) in L Basin under the Augmented Monitoring and Condition Assessment Program (AMCAP). Inspecting the containers to provide information on their structural condition helps ensure the safe handling and storage of the NASNF containers pending final disposition. This report describes the work performed in the initial two phases of this developmental work, namely the bench scale and proof-of-principle (POP) scale, which focus on sensor selection and the tooling design and fabrication for two remote non-destructive examination (NDE) methods. These methods include visual testing (VT) for a visual examination of the container surfaces and ultrasonic testing (UT) for a n examination to characterize container wall material thickness and flaws.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Analysis of Defects in Metal Additive Manufacturing with Augmented Data Generation

Laser powder bed fusion (LPBF) is a method of additive manufacturing (AM) that selectively melts and fuses together microscopic metallic powder. LPBF offers the benefit of producing custom structures out of high strength metals that can be difficult to fabricate with conventional methods. The challenge of LPBF is that 3D printed structures often have internal pores due to process flaws. Pulsed thermal tomography (PTT) is a method for reconstructing the depth profile of materials, allowing the visualization internal voids in solids. In prior work, we developed a convolutional neural network (CNN) which, having been trained on simulated 2D PTT images of subsurface elliptical defects, was able to classify the semi-major radii, semi-minor radii, and angular orientation of the best-fit ellipses in previously unseen PTT images. The unseen PTT images contained subsurface irregular defect shapes imported from scanning electron microscopy (SEM) images of metallic LPBF-printed specimens. Training the CNN on irregular defect shapes instead of on elliptical shapes would make the resulting classifications more descriptive of actual defect shapes. However, this requires a much higher volume of SEM images of material defects, which are difficult to obtain because of random occurrence of defects in LPBF. To address this challenge, we developed a generative adversarial network (GAN) to augment the existing dataset of SEM defect images. The GAN model is demonstrated to create novel yet realistic defect shapes that can be used as input for simulated PTT images to train CNN.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Augmenting the Structural Dynamics Workflow to Reduce Development Times

The success of future systems development at Los Alamos National Laboratory (LANL) depends, in part, on the ability to make informed decisions quickly. This is particularly true when asked to perform structural-mechanical analyses across many design alternatives. To help reduce development time, techniques in reduced-order finite-element modeling (FEM), pretest predictions, and FEM-test correlation and updating were demonstrated in the fiscal year (FY) 23 Technology and Demonstration Project (TED): Augmenting the Structural Dynamics Workflow to Reduce Development Times. This report expands on the TED project final report, LA-UR-34022.

42 ENGINEERING↗
DOE OSTI2024

Retrieval Augmented Generation for Robust Cyber Defense

In cybersecurity, the ability to efficiently analyze and respond to vulnerabilities, weaknesses, attack patterns, and threat tactics is critical for effective defense strategies. With the increasing complexity and volume of cybersecurity data, traditional methods of querying and retrieving information are often inadequate. To address this challenge, we implemented Retrieval-Augmented Generation (RAG) systems—CyRAG and GraphCyRAG—that integrate large language models (LLMs) with both structured data from relational databases and knowledge graphs such as Neo4j. CyRAG is designed to handle structured data, focusing on CVE (Common Vulnerabilities and Exposures) and CWE (Common Weakness Enumeration) entities to generate accurate and context-rich responses. In contrast, GraphCyRAG leverages Neo4j knowledge graphs to retrieve interconnected information from CVE, CWE, CAPEC (Common Attack Pattern Enumeration and Classification), and ATT&CK (Adversarial Tactics, Techniques, and Common Knowledge) datasets. By utilizing Neo4j’s graph-based framework, GraphCyRAG enables deeper traversal of relationships between vulnerabilities and attack patterns, providing cybersecurity analysts with more comprehensive insights into potential attack vectors and mitigation strategies. Our preliminary results demonstrate that integrating knowledge graphs with RAG significantly enhances both the accuracy and depth of threat analysis, allowing for the retrieval of dynamic, real-time data and the generation of contextually aware responses. This approach helps analysts uncover hidden relationships between cyber entities, predict exploit paths, and prioritize mitigation efforts effectively. The integration of RAG with cybersecurity knowledge graphs represents a significant advancement in cybersecurity threat intelligence, enabling more informed decision-making and stronger defense strategies.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Augmented Human Analysis (AHA)

Radio frequency (RF) signal monitoring generally emphasizes intentionally generated signals, such as WiFi, Bluetooth, or cellular transmissions. However, electronic devices also produce unintended radiated emissions (UREs), which could also be useful in RF spectrum analysis. In either case, deriving intelligence from RF signals is typically a human-intensive process requiring significant domain knowledge. In the Augmented Human Analysis (AHA) project, we investigate the utility of dimensionally aligned signal projection (DASP) and machine learning (ML) algorithms for accelerating RF analysis workflows. We find that while DASP algorithms can indeed highlight signal characteristics relevant for classification tasks, the choice of algorithmic hyperparameters greatly affects performance. To address this challenge, we evaluate the quality of DASP outputs using the silhouette score, which measures how well data points cluster; high silhouette scores indicate good clustering, and thus good hyperparameter values. This approach is critical for machine learning pipelines as the DASP parameters cannot be directly optimized during model training. By identifying good DASP parameters, and thus good DASP outputs, as a preprocessing step, we can decrease the amount of effort required for downstream ML model training. We demonstrate our workflow using a dataset of UREs from common household devices, showing that even without the aid of ML, proper selection of DASP parameters enables clustering by device type.

42 ENGINEERING↗
DOE OSTI2024

Evaluation of the Self Retrieval Augmented Generation Technique on Common Security Advisory Framework Data

This small experimental report evaluates a variation of Retrieval Augmented Generation (RAG), called Self-RAG. This method uses a generative language model that incorporates retrieved facts into its generation and is explicitly trained to be able to determine whether retrieved information is enough to answer the input query, with a user-defined threshold for confidence. We performed an experiment using data from the publicly available CISA Common Security Advisory Framework (CSAF) repository (https://github.com/cisagov/CSAF) as the database of facts to be used in retrieval. Qualitative results from the experiment demonstrate that the Self-RAG method has some ability to provide reasonable answers to queries that are in the dataset and will often ignore irrelevant information when asked outside of domain questions (e.g., general facts). In settings with deliberately confusing questions (the question is within domain, but asks about a fabricated advisory), it was able to refuse 40% of the time without further adjustments to the original framework. While this performance is not sufficient for current practical use, further improvements to data formatting, disambiguating results, and leveraging threshold values could improve performance significantly. However, evaluating this will require more extensive evaluations on larger datasets and potentially better models.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Assessment of NuScale SMR Steam Heat Augmentation for Chemical Plant Decarbonization

Nearly 50% of the total energy consumed by the industrial sector in the United States is used to produce process steam with natural gas and coal-fired boilers1 . This project conducts a technoeconomic assessment of a NuScale Small Modular Reactor (SMR) coupled with a chemical plant as an Integrated Energy System (IES) where nuclear produces steam and electric power to meet the requirements of a large chemical plant. In a 2020 study, ORNL evaluated the feasibility of using advanced SMRs, including the NuScale design, to supply energy to the Eastman Chemical Plant. However, since that report was published, NuScale received NRC approval for its uprated 77 MWe design with 56% more power and has also introduced a high-temperature, high pressure, steam heat-augmentation system, a key focus of the new study. The new study also benefits from revised capital costs, a 10-day refueling outage time, reduced plant staffing, higher capacity factors, and a site boundary Emergency Planning Zone methodology. The study consists of a techno-economic assessment of two possible energy sources (nuclear and natural gas) in a number of steam and power generation configurations (NuScale Power Modules (NPMs), boilers and combinations of both) to satisfy the steam and power demand with the most reliable and cost competitive system. A total of 2,947.3 klb/hr of steam and 72.5 MWe of electricity are required for the demonstration case. A range of scenarios and solutions are explored, from a 12-NPM plant (3,000 MWth)—with excess capacity and redundancy, capable of supplying a significant amount of extra power to the grid—to a 4-NPM (1,000 MWth) plant—supplemented with existing boilers or grid power for redundancy. The study uses historical steam and power data from a chemical plant and examines the sensitivity to natural gas and grid power cost variations. Scenarios with up to two times gas and electricity costs were considered. Profitability in a 60-year time horizon was analyzed, consistent with NuScale’s design life specification. A steady-state site integration and reliability analysis was performed, and trade-offs were identified.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2021

Tritium Betavoltaic Powered Sensor Platforms: Power Augmentation with Scintillating Particles

Betavoltaics (BV) are long-life power sources that typically convert beta particle radiation into electricity. Largely, the radioactive decays within the source go unharvested by the device. This work seeks to augment the power generation of BV devices by integration of scintillating particles within the radiative getter to convert beta emission which would otherwise not leave the getter into usable light for power generation. Silica-covered barium fluoride scintillating particles were integrated into a tritiated water getter. Power generation was increased from 100s of nW to µW levels with the addition of 0.2 wt. % particles into the getter. Nanowatt-scale sensor platforms were demonstrated with the µW BV devices and the maximum possible lifetime of such platforms was estimated. As this technique enables higher power density BV devices from conventional Si semiconductors (compared to wider bandgap BVs), the further implementation may lower the barrier-to-deployment of these long-life power/sensor platforms.

42 ENGINEERING↗
DOE OSTI2022

Physics Informed Reinforcement Learning for Power Grid Control using Augmented Random Search

Wide adoption of deep reinforcement learning need to overcome several challenges in energy system domain, including scalability, learning from limited samples, and high-dimensional continuous state and action spaces. In this paper, we integrated physics-based information from the normal generator operation state formula in the reinforcement learning agent's neural network loss function, and applied an augmented random search agent to optimize the generator control under dynamic contingency. Simulation results demonstrated the reliability performance improvements in training speed, reward convergence, sampling efficiency, scalability, and transferability.

physics informed ML, Physics Informed Neural Netwo↗
DOE OSTI2024

Sensorium: commissioning abundant sensors with augmented reality and QR codes

In the future, it will be possible to build high-quality models of building interiors based on data from a dense fleet of sensors reporting on air volumes much smaller than a room or zone. To enable such models, we are creating technologies that allow a fleet of sensors to be commissioned quickly at low cost. Our sensor commissioning process builds a 3D model of each building interior that includes sensor positions and sensor networking information such as sensor MAC addresses. It employs multiple technologies, including augmented reality, LiDAR, QR codes, and computer vision. Sensors can be commissioned at more than 10x the speed and at less than one tenth the cost of traditional approaches.

Bier, Eric A.↗
DOE OSTI2023

Augmented reality to guide pedestrian evacuation in earthquake events

Augmented Reality is a promising technology to support safe pedestrian evacuation from buildings during earthquakes. The widespread availability of phone cameras makes this idea feasible. QR codes, for instance, can place virtual three-dimensional objects to guide people along a prescribed route. In this work, a prototypical system based on this premise was created in response to the 2020 sudden surge in seismic activity in Puerto Rico. The results point towards feasibility as well as to a series of areas that require improvement for a real-life implementation.

Rivera-Hernández, Diego F.↗
DOE OSTI2024

Contrastive Machine Learning with Gamma Spectroscopy Data Augmentations for Detecting Shielded Radiological Material Transfers

Data analysis techniques can be powerful tools for rapidly analyzing data and extracting information that can be used in a latent space for categorizing observations between classes of data. Machine learning models that exploit learned data relationships can address a variety of nuclear nonproliferation challenges like the detection and tracking of shielded radiological material transfers. The high resource cost of manually labeling radiation spectra is a hindrance to the rapid analysis of data collected from persistent monitoring and to the adoption of supervised machine learning methods that require large volumes of curated training data. Instead, contrastive self-supervised learning on unlabeled spectra can enhance models that are built on limited labeled radiation datasets. This work demonstrates that contrastive machine learning is an effective technique for leveraging unlabeled data in detecting and characterizing nuclear material transfers demonstrated on radiation measurements collected at an Oak Ridge National Laboratory testbed, where sodium iodide detectors measure gamma radiation emitted by material transfers between the High Flux Isotope Reactor and the Radiochemical Engineering Development Center. Label-invariant data augmentations tailored for gamma radiation detection physics are used on unlabeled spectra to contrastively train an encoder, learning a complex, embedded state space with self-supervision. A linear classifier is then trained on a limited set of labeled data to distinguish transfer spectra between byproducts and tracked nuclear material using representations from the contrastively trained encoder. The optimized hyperparameter model achieves a balanced accuracy score of 80.30%. Any given model—that is, a trained encoder and classifier—shows preferential treatment for specific subclasses of transfer types. Regardless of the classifier complexity, a supervised classifier using contrastively trained representations achieves higher accuracy than using spectra when trained and tested on limited labeled data.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Objective Phenotyping of Root System Architecture Using Image Augmentation and Machine Learning in Alfalfa (Medicago sativa L.)

Active breeding programs specifically for root system architecture (RSA) phenotypes remain rare; however, breeding for branch and taproot types in the perennial crop alfalfa is ongoing. Phenotyping in this and other crops for active RSA breeding has mostly used visual scoring of specific traits or subjective classification into different root types. While image-based methods have been developed, translation to applied breeding is limited. This research is aimed at developing and comparing image-based RSA phenotyping methods using machine and deep learning algorithms for objective classification of 617 root images from mature alfalfa plants collected from the field to support the ongoing breeding efforts. Our results show that unsupervised machine learning tends to incorrectly classify roots into a normal distribution with most lines predicted as the intermediate root type. Encouragingly, random forest and TensorFlow-based neural networks can classify the root types into branch-type, taproot-type, and an intermediate taproot-branch type with 86% accuracy. With image augmentation, the prediction accuracy was improved to 97%. Coupling the predicted root type with its prediction probability will give breeders a confidence level for better decisions to advance the best and exclude the worst lines from their breeding program. This machine and deep learning approach enables accurate classification of the RSA phenotypes for genomic breeding of climate-resilient alfalfa.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Augmented Gaussian random field: Theory and computation

We propose the novel augmented Gaussian random field (AGRF), which is a universal framework incorporating the data of observable and derivatives of any order. Rigorous theory is established. We prove that under certain conditions, the observable and its derivatives of any order are governed by a single Gaussian random field, which is the aforementioned AGRF. As a corollary, the statement "the derivative of a Gaussian process remains a Gaussian process" is validated, since the derivative is represented by a part of the AGRF. Moreover, a computational method corresponding to the universal AGRF framework is constructed. Both noiseless and noisy scenarios are considered. Formulas of the posterior distributions are deduced in a nice closed form. A significant advantage of our computational method is that the universal AGRF framework provides a natural way to incorporate arbitrary order derivatives and deal with missing data. We use four numerical examples to demonstrate the effectiveness of the computational method. The numerical examples are composite function, damped harmonic oscillator, Korteweg-De Vries equation, and Burgers' equation.

Mathematics↗
DOE OSTI2022

Data augmentation for disruption prediction via robust surrogate models

The goal of this work is to generate large statistically representative datasets to train machine learning models for disruption prediction provided by data from few existing discharges. Such a comprehensive training database is important to achieve satisfying and reliable prediction results in artificial neural network classifiers. Here, we aim for a robust augmentation of the training database for multivariate time series data using Student-t process regression. We apply Student-t process regression in a state space formulation via Bayesian filtering to tackle challenges imposed by outliers and noise in the training data set and to reduce the computational complexity. Thus, the method can also be used if the time resolution is high. We use an uncorrelated model for each dimension and impose correlations afterwards via coloring transformations. We demonstrate the efficacy of our approach on plasma diagnostics data of three different disruption classes from the DIII-D tokamak. To evaluate if the distribution of the generated data is similar to the training data, we additionally perform statistical analyses using methods from time series analysis, descriptive statistics, and classic machine learning clustering algorithms.

97 MATHEMATICS AND COMPUTING↗