Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ANTIMONY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Microstructure analyses and thermoelectric properties of Ag{sub 1-x}Pb{sub 18}Sb{sub 1+y}Te{sub 20}

This study reports microstructural investigations of long-term annealed Ag{sub 1-x}Pb{sub m}Sb{sub 1+y}Te{sub 2+m} (m=18, x=y=0, hereinafter referred to as AgPb{sub 18}SbTe{sub 20}) (Lead-Antimony-Silver-Tellurium, LAST-18) as well as of Ag{sub 1-x}Pb{sub 18}Sb{sub 1+y}Te{sub 20}, i.e. Ag-deficient and Sb-excess LAST-18 (x{ne}0,y{ne}0), respectively. Two different length scales are explored. The micrometer scale was evaluated by SEM to analyze the volume fraction and the number of secondary phases as well as the impact of processing parameters on the homogeneity of bulk samples. For AgPb{sub 18}SbTe{sub 20}, site-specific FIB liftout of TEM lamellae from thermoelectrically characterized samples was accomplished to investigate the structure on the nanometer scale. High-resolution TEM and energy-filtered TEM were performed to reveal shape and size distribution of nanoprecipitates, respectively. A hypothesis concerning the structure-property relationship is set out within the frame of a gradient annealing experiment. This study is completed by results dealing with inhomogeneities on the micrometer scale of Ag{sub 1-x}Pb{sub 18}Sb{sub 1+y}Te{sub 20} and its electronic properties. Highlights: Black-Right-Pointing-Pointer SEM and TEM microstructure investigation of long-term annealed AgPb{sub 18}SbTe{sub 20}. Black-Right-Pointing-Pointer SEM and thermoelectric studies on Ag{sub 1-x}Pb{sub 18}Sb{sub 1+y}Te{sub 20}. Black-Right-Pointing-Pointer Discussion concerning structure-property relationship in long-term annealed AgPb{sub 18}SbTe{sub 20}. Black-Right-Pointing-Pointer Correlation between Ag{sub 1-x}Pb{sub 18}Sb{sub 1+y}Te{sub 20} microscale structure and electronic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Alternative route for the preparation of CoSb{sub 3} and Mg{sub 2}Si derivatives

An alternative manufacturing route has been developed for cobalt triantimonide and magnesium disilicide derivatives. Elemental powders were mixed in stoichiometric proportions, cold pressed into cylindrical preforms and heated in oxygen-free environment to initiate the exothermic reaction. According to DTA/TG measurements and observations under high-temperature microscope, the onset of reaction occurred at a temperature not exceeding the melting point of the more volatile component, i.e. antimony in the case of CoSb{sub 3} and magnesium in the case of Mg{sub 2}Si. The reaction products were additionally heat treated to secure homogenization. Dense sinters were obtained by hot uniaxial pressing of the obtained powders in moderate temperature-and-pressure conditions. Several advantages were identified in the proposed technology: absence of liquid phases, relatively short time of the synthesis, possibility of in-situ or ex-situ doping and grain size control. - Graphical abstract: (1) Manufacturing flow sheet for CoSb{sub 3} (milling included) and Mg{sub 2}Si (no milling). (2) Micrographs of CoSb{sub 3} product. (3) Micrographs of Mg{sub 2}Si product. Highlights: Black-Right-Pointing-Pointer The combustion synthesis followed by HP was used for the manufacturing of CoSb{sub 3} or Mg{sub 2}Si. Black-Right-Pointing-Pointer The time of reaction is shorter compared with many other synthesis methods. Black-Right-Pointing-Pointer The process is scalable and practically wasteless.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A study of the crystal structures and the phase transitions of the ordered double perovskites Sr{sub 2}ScSbO{sub 6} and Ca{sub 2}ScSbO{sub 6}

The crystal structures and phase transitions of the two ordered double perovskites Sr{sub 2}ScSbO{sub 6} and Ca{sub 2}ScSbO{sub 6} were studied using conventional X-ray and neutron powder-diffraction methods. The crystal structures of both compounds have the P2{sub 1}/n space group symmetry at room temperature, resulting from Sc/Sb ordering. The evolution with temperature of the structure of the Sr containing compound shows the presence of three phase transitions with the following sequence: P2{sub 1}/n{yields}I2/m{yields}I4/m{yields}Fm3{sup Macron }m, at about 400, 560 and 650 K, respectively. The smaller size of Ca cation, with respect to that of Sr cation, leads to a large distortion of Ca{sub 2}ScSbO{sub 6} at room temperature. This fact in turn causes that the Ca containing compound shows only the first phase transition from P2{sub 1}/n to I2/m at high temperature at about 1440 K. The analysis of the phase transitions and the refinements have done using the symmetry-adapted modes and the tools of the Bilbao Crystallographic Server. - Graphical abstract: Representation of the new structure resulting from the coupling of the unidimensional GM{sup 4+} and X{sup 3+} modes with the a{sup +}b{sup -}b{sup -} tilting scheme associated to P2{sub 1}/n and the temperature evolution of the amplitudes of the GM{sup 1+}, GM{sup 3+}, GM{sup 4+} and GM{sup 5+} modes of I2/m and I4/m space groups obtained from the NPD data of Sr{sub 2}ScSbO{sub 6}. Highlights: Black-Right-Pointing-Pointer Study of two compounds of the antimony double perovskite family. Black-Right-Pointing-Pointer Determination of the structures at room temperature. Black-Right-Pointing-Pointer Determination of high-temperature phase transitions by X-ray and neutron powder diffraction. Black-Right-Pointing-Pointer Using the symmetry-adapted modes to study the phase transitions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigations of the crystallization mechanism of CrSb and CrSb{sub 2} multilayered films using in-situ X-ray diffraction and in-situ X-ray reflectometry

Chromium and antimony multilayered films with variable elemental layer thickness were deposited on (1 0 0)-Si substrate cooled with liquid nitrogen. The stoichiometry of the films was adjusted to Cr:Sb=1:1 and 1:2. The thickness of Cr-Sb repeating units of these multifilms was varied between 11.4 and 102.5 A. Satellite maxima in the X-ray reflectivity curves observed for films in the as-deposited state demonstrate an alternating stacking of the evaporated elements. The reactivity of the superlattice reactants was investigated with temperature dependent in-situ X-ray diffractometry and X-ray reflectometry. The crystallization temperature of CrSb depends on the double-layer thickness and is about 90 Degree-Sign C for a Cr:Sb ratio of 1:1 and double-layer thickness of 53.7 A where nucleation and crystal formation occurs at the element interfaces, while for a thin double-layer thickness (11.4 A) first interdiffusion of the elements occurs before crystallization starts, i.e., an amorphous intermediate is formed prior to crystallization of CrSb. A decomposition reaction into CrSb{sub 2} occurs at about 230 Degree-Sign C, and up to about 575 Degree-Sign C, CrSb, CrSb{sub 2} and amorphous Cr coexist. For the ratio Cr:Sb=1:2 and a thin double-layer thickness prior to crystallization of CrSb{sub 2} nano-sized crystallites with a composition near CrSb{sub 2} nucleate and grow. These crystallites are then successively transformed in long-range ordered crystals exhibiting a pronounced preferred orientation. For films with a thicker repeat unit first formation of CrSb is observed which then reacts with elemental Sb yielding crystalline CrSb{sub 2}. An activation energy for interdiffusion of Cr and Sb of about 1.8 eV is estimated for a film with Cr:Sb=1:1 exhibiting a double-layer thickness of about 53.7 A and an energy for crystal growth of about 1.1 eV. For the film with the thinner double-layer thickness of 11.4 A a lower value of the activation energy for interdiffusion is obtained. For CrSb{sub 2} the energy for crystal growth is about 3.0 eV being significantly larger than for CrSb. Specific resistivity and Hall coefficient measurements were performed for crystalline CrSb and CrSb{sub 2} films. The temperature-dependent resistivity measurement exhibits a metallic behavior for CrSb and semi-conducting properties for CrSb{sub 2}. - Graphical abstract: The compound CrSb{sub 2} crystallizes from the amorphous state via intermediate formation of CrSb. Highlights: Black-Right-Pointing-Pointer CrSb and CrSb{sub 2} crystallize at very low temperatures in multilayered films. Black-Right-Pointing-Pointer Film thickness determines crystallization at interfaces or from amorphous intermediate. Black-Right-Pointing-Pointer Prior to crystallization of CrSb{sub 2}, highly textured CrSb crystallizes first. Black-Right-Pointing-Pointer Depending on the film thickness CrSb{sub 2} exhibits different preferred orientations.

36 MATERIALS SCIENCE↗

Structural and magnetic characterisation of the pyrochlores Bi{sub 2-x}Fe{sub x}(FeSb)O{sub 7}, (x=0.1, 0.2, 0.3), Nd{sub 1.8}Fe{sub 0.2}(FeSb)O{sub 7} and Pr{sub 2}(FeSb)O{sub 7}

Four antimony-containing pyrochlores with compositions Bi{sub 2-x}Fe{sub x}(FeSb)O{sub 7}, where x=0.1, 0.2, 0.3, and Nd{sub 1.8}Fe{sub 0.2}(FeSb)O{sub 7} have been synthesised, their structural properties examined, and compared to that of the pyrochlore phase Pr{sub 2}(FeSb)O{sub 7} which we have structurally characterised for the first time. The Fe{sup 3+} ions in Pr{sub 2}(FeSb)O{sub 7} are located only on the B-sites whereas in the bismuth- and neodymium-containing pyrochlore structures the Fe{sup 3+} ions are present on both the A- and B-sites giving rise to static displacive disorder in the A{sub 2}O' chains. The presence of a smaller cation on the A-site in materials of composition Bi{sub 2-x}Fe{sub x}(FeSb)O{sub 7} appears to lower the radius ratio (r{sub A}/r{sub B}) and leads to a stabilisation of the structure. Magnetic susceptibility measurements reveal no long range order, but Bi{sub 1.9}Fe{sub 0.1}(FeSb)O{sub 7} and Bi{sub 1.8}Fe{sub 0.2}(FeSb)O{sub 7} undergo transitions at ca. 12K to a spin-glass state; Nd{sub 1.8}Fe{sub 0.2}(FeSb)O{sub 7} and Pr{sub 2}(FeSb)O{sub 7} are paramagnetic. - graphical abstract: Intersite cation mixing in A{sub 2}(FeSb)O{sub 7} (A=Bi, Pr, Nd) pyrochlores. Highlights: Black-Right-Pointing-Pointer The instability of the pyrochlore composition Bi{sub 2}FeSbO{sub 7} is reported for the first time. Black-Right-Pointing-Pointer Structure analysis confirms the presence of Fe on the Bi-site. Black-Right-Pointing-Pointer The presence of Fe{sup 3+} on two distinct sites is supported by Moessbauer spectroscopy. Black-Right-Pointing-Pointer For Nd{sub 2}FeSbO{sub 7} and Pr{sub 2}FeSbO{sub 7,} Fe can also enter the Nd/Prsite. Black-Right-Pointing-Pointer No magnetic order occurs in these materials.

36 MATERIALS SCIENCE↗

Microwaved assisted fast synthesis of n and p-doped Mg{sub 2}Si

Magnesium silicide based alloys fast syntheses have been carried out using microwave heating. Precursors were first ball milled powders together under inert gas. Resulting powders were then placed into a glassy carbon crucible before being heated by microwave irradiation. Sintering of the powder was performed by spark plasma method. XRD and SEM/EDS were used to investigate composition, structure and morphology. Thermoelectric performances of the samples were measured in the temperature range of 320–775 K. The doping effect of several elements such as silver, tin, antimony, cobalt and bismuth has been studied. n-Type and p-type Mg{sub 2}Si based materials have been successfully synthesized, with maximum ZT value up to 0.7 and 0.35 at 770 K for a n-type and a p-type sample, respectively. We demonstrate here that the use of microwave irradiation to prepare doped Mg{sub 2}Si is possible, and we discuss here the thermoelectric properties of such samples. - Schematic representation of microwave hybrid heating. - Highlights: • A promising method for fast production of Mg{sub 2}Si in the frame of heat harvesting applications is presented. • A novel technological approaches towards nanostructured materials is proposed. • Thermoelectric properties of Mg{sub 2}Si doped materials prepared under microwave irradiation are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solvothermal synthesis of a new 3-D mixed-metal sulfide framework, (H{sub 1.33}tren)[In{sub 2.67}Sb{sub 1.33}S{sub 8}]·tren

A new indium(III) antimony(V) sulfide, (H{sub 1.33}tren)[In{sub 2.67}Sb{sub 1.33}S{sub 8}]·tren, has been prepared solvothermally at 433 K. The compound crystallises in the tetragonal space group I-42d (lattice parameters, a=12.6248(5) and c=19.4387(18) Å at 150 K) and contains adamantane-like T2 supertetrahedral units comprised of corner-sharing InS{sub 4}{sup 5−} and SbS{sub 4}{sup 3−} tetrahedra. The adamantane-like units are then linked through sulfur vertices to generate an open, 3-D framework structure containing large pores in which neutral, protonated tren (tris(2-aminoethylene)amine) molecules reside. The presence of the organic components was confirmed by solid-state {sup 13}C NMR (10 kHz), combustion and thermogravimetric analysis. The band gap, obtained from UV–vis diffuse reflectance measurements, is 2.7(2) eV. Stirring with either water or alkali-metal salt solution leads to removal of the neutral tren molecules and an ~9% reduction in unit-cell volume on formation of (H{sub 1.33}tren)[In{sub 2.67}Sb{sub 1.33}S{sub 8}]·(H{sub 2}O){sub 4}. - Graphical abstract: Linking of In(III)-Sb(V)-S adamantane units to form a 3-D open framework. - Highlights: • Preparation and structural characterisation of a new mixed-metal thiometallate. • The first mixed In(III)/Sb(V) supertetrahedron. • Optical band gap of 2.7(2) eV. • Soaking in aqueous alkali-metal solutions leads to removal of ca. 50% of the organic content.

36 MATERIALS SCIENCE↗

Neutron diffraction study of magnetic ordering of the manganese bismuth chloro-sulfide: MnBiS{sub 2}Cl

In quaternary compounds of Mn{sup 2+}PnQ{sub 2}X (Pn = Sb, Bi; Q = S, Se; X = Cl, Br, I), Mn atoms in octahedral coordination (4 Q and 2 X) form waved layers separated by Pn atoms. The magnetic structure of the manganese bismuth chloro-sulfide MnBiS{sub 2}Cl has been determined by neutron powder diffraction, revealing a magnetic ordering with an incommensurate wave-vector along b-axis (k = [0, 0.3978, 0]) at 1.6 K. Two modulation models, sinusoidal and helicoidal, give quite equivalent magnetic reliability factors (R{sub mag} = 0.0450 and 0.0481, respectively). The magnetic moment decreases with increasing temperature, to zero at T{sub N} = 32 K. The evolution of the propagation wave-vector shows an irregularity at about 28 K. It could evidence two-phase transitions in agreement with the specific heat measurements. These results are compared to those of manganese antimony chloro-sulfide MnSbS{sub 2}Cl, isotypic with MnBiS{sub 2}Cl.

36 MATERIALS SCIENCE↗

Growth and characterization of Cu3SbSe4 thin films through thermally diffusing Sb2Se3 – CuSe by chemical bath deposition (CBD)

Highlights: • Cu{sub 3}SbSe{sub 4} films were formed by chemical bath deposition followed by a heat treatment. • Prepared Cu{sub 3}SbSe{sub 4} thin films have promising properties to absorbing layer in a solar cell or thermoelectric material. • Electrical conductivity values of Cu{sub 3}SbSe{sub 4} are high, considering its manufacturing method and the previous reports in the field. - Abstract: In the present work, Cu{sub 3}SbSe{sub 4} thin films have been successfully synthesized by chemical bath deposition (CBD) involving a sequential deposition of antimony selenide (Sb{sub 2}Se{sub 3}) and copper selenide (CuSe) films and then annealing in a vacuum atmosphere. The influence of CuSe deposition time on the previously deposited Sb{sub 2}Se{sub 3} films was investigated to obtain the ternary phase. A study of the structural, morphological, optical and electrical properties of these films was carried out using appropriate characterization techniques. X-ray diffraction analysis revealed that the films show a tetragonal crystalline crystalline structure corresponding to the Permingeatite phase (Cu{sub 3}SbSe{sub 4}). The crystal size increases with the CuSe deposition time. It is identified by Raman spectroscopy that at low CuSe deposition times a low concentration of Sb{sub 2}Se{sub 3} coexists in the thin film. The optical band gap energy of these films was evaluated in the range of 0.67–1.18 eV, decreasing by increasing CuSe deposition time. By field-emission scanning electron microscopy (FESEM) a morphological study was carried out, observing that by increasing the deposition time of CuSe there is an increase of agglomerates and decrease the porosity in the samples. An elemental analysis was carried out by energy dispersive X-ray spectroscopy to observe the composition and elemental distribution in the ternary compound. The films showed a p-type electrical conductivity with values between 0.417 and 55.55 (Ω cm{sup −1}). The mobility and carrier density were performed by Hall Effect and Thermoelectric measurements observing a slight increase in the values by increasing the time of CuSe deposition. All results obtained for thin films of Cu{sub 3}SbSe{sub 4} suggest that it could be used as an absorber material in a solar cell or thermoelectric material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The location of Sb luminescence centers in Ca10(PO4)6F2 phosphors

Highlights: • Sb is on Ca2 sites (N center) in commercial phosphors, literature conflict ended. • N centers are covalently bonded SbO pairs have IR absorption band at 685 cm{sup −1}. • Incorporation of Na converts N to HE centers by removal of O on F sites. • Proportions of N and HE precisely controlled by Na/Sb molar ratio. • Luminescence of N and HE centers is very different, both are described in detail. - Abstract: The luminescence centers in antimony doped fluorapatite phosphors were characterized by optical emission spectroscopy, IR and FTIR absorption, and Raman scattering. The luminescence centers in commercial phosphors consist of covalently bound SbO pairs (N center). The vibrational spectrum of analogous BiO pairs was studied for the first time in FAP. New methods of preparation yielded material with a record high level of SbO doping. There is a second well established (HE) center which consists of Sb on Ca2 sites and Na at nearby Ca1 or Ca2 sites. The properties of the N and HE centers differ greatly and are described in detail. We showed for the first time that HE centers like N centers can efficiently sensitize the fluorescence of manganese in FAP.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mode-of-Action of Self-Extinguishing Polymer Blends Containing Organoclays

We have shown that the addition of nanoclays is an effective means for enhancing the flame retardant properties of polymer blends. Polymer blends are difficult to render flame retardant even with the addition of flame retardant agents due to dispersion and phase segregation during the heating process. We show that the addition of 5% functionalized Cloisite 20A clays in combination with 15% decabromodiphenyl ether and 4% antimony trioxide to a polystyrene/poly(methyl methacrylate) blend can render the compound flame resistant within the UL-94-V0 standard. Using a variety of micro-characterization methods, we show that the clays are concentrated at the interfaces between the polymers in this blend and completely suppress phase segregation. The flame retardant (FR) is absorbed onto the clay surfaces, and the exfoliation of the clays also distributes the FR agent uniformly within the matrix. TGA of the nanocomposite indicates that prior to the addition of clay, the dissociation times of the individual components varied by more than 20 C, which complicated the gas-phase kinetics. Addition of the clays causes all the components to have a single dissociation temperature, which enhanced the efficacy of the FR formula in the gas phase. Cone calorimetry also indicated that the clays decreased the heat release rate (HRR) and the mass loss rate (MLR), due to the formation of a robust char. In contrast, minimal charring occurred in blends containing just the FR. SEM examination of the chars showed that the clay platelets were curved and in some cases tightly folded into nanotube-like structures. These features were only apparent in blends, indicating that they might be associated with thermal gradients across the polymer phase interface. SEM and SAXS examinations of the nanocomposites after partial exposure to the flame indicated that the clays aggregated into ribbon-like structures, approximately microns in length, after the surfactant thermally decomposed. Thermal modeling indicated that these ribbons might partially explain the synergy due to better distribution of the heat and improve the mechanical properties of the melt at high temperatures, in a manner similar to the one reported for carbon nanotubes.

36 MATERIALS SCIENCE↗

Pnictogen Bonding at the Core of a Carbene-Stiborane-Gold Complex: Impact on Structure and Reactivity

Our interest in the design of ambiphilic ligands and their coordination to gold has led us to synthesize an indazol-3-ylidene gold chloride complex functionalized at the 4-position of the indazole backbone by a stibine functionality. The antimony center of this new complex cleanly reacts with o-chloranil to afford the corresponding stiborane derivative. Structural analysis indicates that the stiborane coordination environment is best described as a distorted square pyramid whose open face is oriented toward the gold center, allowing for the formation of a long donor–acceptor, or pnictogen, Au → Sb bonding interaction. The presence of this interaction, which has been probed computationally, is also manifested in the enhanced catalytic activity of this complex in the cyclization of N-propargyl-4-fluorobenzamide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly Durable and Active Pt/Sb-Doped SnO 2 Oxygen Reduction Reaction Electrocatalysts Produced by Atomic Layer Deposition

Platinum supported on mixed-metal oxides (MMOs) are a class of active and durable cathode catalysts for proton exchange membrane fuel cell (PEMFC) due to a combination of the high oxidative stability of the supports and strong-metal-support interactions (SMSI) that enable them to exceed the activity of Pt/C. Herein, we solve a significant remaining challenge with Pt/MMO systems, namely the relatively low surface area and porosity. This is achieved by dispersing nearly-uniform Pt clusters using atomic layer deposition (ALD) on highly conductive (6.2 S/cm) and stable antimony doped tin dioxide (ATO) support. ALD-Pt/ATO exhibited significantly higher electrochemically active surface area (ECSA) (74 m 2 /g) and oxygen reduction reaction (ORR) catalytic activity (102 mA/mg Pt at 0.9 V vs. RHE) compared to Pt/ATO synthesized using ethylene glycol (ECSA=31 m 2 /g Pt , mass activity=52 mA/mg Pt at 0.9 V vs. RHE) and formic acid reduction methods (ECSA=28 m 2 /g Pt , mass activity=46 mA/mg Pt at 0.9 V vs. RHE). Further characterization showed that wet chemical methods resulted in poorer Pt particle dispersion, poor control over Pt particle size distribution and chemical degradation of the support (during Pt deposition). Given the near-ideal Pt particle size distribution of the ALD-Pt/ATO, particle size growth and loss of ECSA was found to be minimal over the course of rigorous potential cycling. Thus, after 10,000 potential cycles between 1V and 1.5V vs. RHE, ALD-Pt/ATO and other Pt/ATOs were found to retain 100% of their initial ECSA compared to 57.6% retention for Pt/C. Upon testing in a H 2 /air PEMFC, following 1,000 potential cycles, the change in ALD-Pt/ATO performance was negligible while Pt/C exhibited a 68.2% loss of initial peak power density. Thus, ALD-Pt/ATO is an active and highly durable ORR electrocatalyst in PEMFCs under start-up-shut down conditions.

25 ENERGY STORAGE↗

Prediction of Bi 2 Te 3 -Sb 2 Te 3 Interfacial Conductance and Superlattice Thermal Conductivity Using Molecular Dynamics Simulations

Bismuth telluride (Bi 2 Te 3 ) and its alloys with antimony telluride (Sb 2 Te 3 ) have long been considered to be the best room-temperature bulk thermoelectric (TE) materials. In recent decades, proof-of-concept demonstrations on Bi 2 Te 3 -Sb 2 Te 3 nanostructures have shown high TE performance due to reduction in lattice thermal conductivities. Particularly, ultra-low thermal conductivities have been observed in Bi 2 Te 3 -Sb 2 Te 3 1D superlattices, leading to thermoelectric figures of merit (ZT) as high as 2.4. In contrast, very few computational studies have been performed to provide insight into the phonon transport across these nanostructures. In this work, we use non-equilibrium molecular dynamics simulations with previously developed force fields to simulate thermal transport across Bi 2 Te 3 -Sb 2 Te 3 interfaces and superlattices. We first calculate the thermal conductance associated with a Bi 2 Te 3 -Sb 2 Te 3 interface across a temperature range of 200–400 K. Furthermore, the values are also compared with thermal conductances calculated by a modified Landauer transport formalism using phonon transmission coefficients obtained from the diffuse mismatch model. Our results show that inelastic scattering processes contribute to an increase in interfacial thermal conductance at higher temperatures. Finally, we calculate the thermal conductivities of Bi 2 Te 3 -Sb 2 Te 3 superlattices with varying period lengths from 2 to 18 nm. A minimum thermal conductivity of 0.27 W/mK is observed at a period length of 4 nm, which is attributed to the competition between incoherent and coherent phonon transport regimes. In comparison with previous experimental measurements in the literature, our results show good agreement with respect to the range of thermal conductivity values and the period length corresponding to the minimum superlattice thermal conductivity.

42 ENGINEERING↗

Low-temperature atomic layer deposition of CuSbS 2 for thin-film photovoltaics

Copper antimony sulfide (CuSbS 2 ) has been gaining traction as an earth-abundant absorber for thin-film photovoltaics given its near ideal band gap for solar energy conversion (~1.5 eV), large absorption coefficient (>10 4 cm –1 ), and elemental abundance. Through careful in situ analysis of the deposition conditions, a low-temperature route to CuSbS 2 thin films via atomic layer deposition has been developed. After a short (15 min) post process anneal at 225 °C, the ALD-grown CuSbS 2 films were crystalline with micron-sized grains, exhibited a band gap of 1.6 eV and an absorption coefficient >10 4 cm –1 , as well as a hole concentration of 10 15 cm –3 . Finally, the ALD-grown CuSbS 2 films were paired with ALD-grown TiO 2 to form a photovoltaic device. This photovoltaic device architecture represents one of a very limited number of Cd-free CuSbS 2 PV device stacks reported to date, and it is the first to demonstrate an open-circuit voltage on par with CuSbS 2 /CdS heterojunction PV devices. As a result, while far from optimized, this work demonstrates the potential for ALD-grown CuSbS 2 thin films in environmentally benign photovoltaics.

36 MATERIALS SCIENCE↗

Core Levels, Band Alignments, and Valence-Band States in CuSbS 2 for Solar Cell Applications

The earth-abundant material CuSbS 2 (CAS) has shown good optical properties as a photovoltaic solar absorber material, but has seen relatively poor solar cell performance. To investigate the reason for this anomaly, the core levels of the constituent elements, surface contaminants, ionization potential, and valence-band spectra are studied by X-ray photoemission spectroscopy. The ionization potential and electron affinity for this material (4.98 and 3.43 eV) are lower than those for other common absorbers, including CuInxGa (1-x) Se 2 (CIGS). Experimentally corroborated density functional theory (DFT) calculations show that the valence band maximum is raised by the lone pair electrons from the antimony cations contributing additional states when compared with indium or gallium cations in CIGS. The resulting conduction band misalignment with CdS is a reason for the poor performance of cells incorporating a CAS/CdS heterojunction, supporting the idea that using a cell design analogous to CIGS is unhelpful. These findings underline the critical importance of considering the electronic structure when selecting cell architectures that optimize open-circuit voltages and cell efficiencies.

14 SOLAR ENERGY↗

Understanding Stabilization in Nanoporous Intermetallic Alloy Anodes for Li-Ion Batteries Using Operando Transmission X-ray Microscopy

Tin-based alloying anodes are exciting due to their high energy density. Unfortunately, these materials pulverize after repetitive cycling due to the large volume expansion during lithiation and delithiation; both nanostructuring and intermetallic formation can help alleviate this structural damage. Here, these ideas are combined in nanoporous antimony–tin (NP-SbSn) powders, synthesized by a simple and scalable selective-etching method. The NP-SbSn exhibits bimodal porosity that facilitates electrolyte diffusion; those void spaces, combined with the presence of two metals that alloy with lithium at different potentials, further provide a buffer against volume change. This stabilizes the structure to give NP-SbSn good cycle life (595 mAh/g after 100 cycles with 93% capacity retention). Operando transmission X-ray microscopy (TXM) showed that during cycling NP-SbSn expands by only 60% in area and then contracts back nearly to its original size with no physical disintegration. The pores shrink during lithiation as the pore walls expand into the pore space and then relax back to their initial size during delithiation with almost no degradation. Importantly, the pores remained open even in the fully lithiated state, and structures are in good physical condition after the 36th cycle. The results of this work should thus be useful for designing nanoscale structures in alloying anodes.

25 ENERGY STORAGE↗

High figure of merit in nanostructured n-type KPb{sub m}SbTe{sub m+2} thermoelectric materials.

We demonstrate that the KPb{sub m}SbTe{sub 2+m} system (PLAT-m for tellurium, antimony, lead potassium, m = 19-21) of materials exhibits high thermoelectric performance. Samples with compositions K{sub 1-x}Pb{sub m+{delta}}Sb{sub 1+{gamma}}Te{sub m+2} were prepared using several combinations of x, {delta}, {gamma} and m and their thermoelectric properties were investigated in the temperature range of 300-800 K. All K{sub 1-x}Pb{sub m+{delta}}Sb{sub 1+{gamma}}Te{sub m+2} samples exhibited n-type conduction over the measured temperature range. Their lattice thermal conductivities were found to be significantly reduced when compared to PbTe and even AgPb{sub m}SbTe{sub m+2}. For example, for K{sub 0.95}Pb{sub 20}Sb{sub 1.2}Te{sub 22} a lattice thermal conductivity as low as 0.4 W/(m {center_dot} K) was estimated at 650 K (based on a Lorenz number of 1.25 x 10{sup -8} W {center_dot} {Omega}/K{sup 2}). High resolution transmission electron microscopy on several samples revealed a widely dispersed nanoscale particle with varying size and shape endotaxially embedded inside a PbTe-rich matrix which is believed to be responsible for the reduced lattice thermal conductivity of K{sub 1-x}Pb{sub m+{delta}}Sb{sub 1+{gamma}}Te{sub m+2} materials. Because of their small size, the nanoinclusions are coherent with the matrix and therefore do not markedly degrade the electrical conductivity of the materials. As a result, very high figures of merit are achieved at high temperature for several compositions. For K{sub 0.95}Pb{sub 20}Sb{sub 1.2}Te{sub 22}, a maximum figure of merit ZT {approx} 1.6 was obtained around 750 K. This value is similar to that of n-type LAST-18 and is two times larger than that of the-state-of-the-art n-type PbTe.

36 MATERIALS SCIENCE↗