Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AMES LABORATORY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Heteronuclear Correlation SSNMR Spectroscopy with Indirect Detection under Fast Magic-Angle Spinning [Book Chapter]

The main focus of this chapter is to address experimental strategies on the subject by providing a hands-on guide to fast MAS experiments, with a particular focus on indirect detection. Although our experience is limited to our respective laboratories in Ames and Yokohama, we hope that our descriptions of experimental setups and optimization procedures are sufficiently general to be applicable to all modern instruments. The chapter is organized as follows. Section 2 below introduces briefly the fast MAS technology and its main advantages. In Section 3, we describe the hardware associated with this remarkable technology and provide practical advices on its use, including procedures for loading and unloading the samples, maintaining the probe, reducing t 1 noise, etc. In Section 4, we describe the principles and hands-on aspects of experiments involving the indirect detection of spin-1/2 and 14 N nuclei

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Fluoropolymer Composites from Partially Perfluoroalkylated Waste Polyethylene

Chemically modified plastics have emerged as practical solutions to plastic waste increases. Here, the inherent novelty of decorating polymer chains with chemical functionality results in distinct properties that expand the available application space. Nevertheless, developing designer materials for specific applications beyond compatibilization or mild property enhancement is difficult due to the synergistic effects of both the polar functionality imparted and the parent materials' intrinsic properties. By incorporating perfluoro-alkyl side-chains onto the backbone of dehydrogenated waste HDPE, unique surface properties intermediate between polytetrafluoroethylene (PTFE, the model fluoropolymer) and HDPE become apparent, while the overall material mechanical and thermal properties result in more LLDPE-like materials. This is demonstrated through moderate decreases in the surface free energy of the perfluoroalkylated polyolefin surface (increase in H 2 O contact angle of ~ 6°) and increased ordering under shear when blended with PTFE nanoparticles where the crossover point occurred at higher strains. Critically, perfluoroalkylated HDPE possesses improved rheological modification properties at elevated temperatures with PTFE nanoparticles, resulting in more thermally robust and stable composite materials.

fluoropolymer↗
NASA NTRS2002

From Field to Laboratory: A New Database Approach for Linking Microbial Field Ecology with Laboratory Studies

The Ames Exobiology Culture Collection Database (AECC-DB) has been developed as a collaboration between microbial ecologists and information technology specialists. It allows for extensive web-based archiving of information regarding field samples to document microbial co-habitation of specific ecosystem micro-environments. Documentation and archiving continues as pure cultures are isolated, metabolic properties determined, and DNA extracted and sequenced. In this way metabolic properties and molecular sequences are clearly linked back to specific isolates and the location of those microbes in the ecosystem of origin. Use of this database system presents a significant advancement over traditional bookkeeping wherein there is generally little or no information regarding the environments from which microorganisms were isolated. Generally there is only a general ecosystem designation (i.e., hot-spring). However within each of these there are a myriad of microenvironments with very different properties and determining exactly where (which microenvironment) a given microbe comes from is critical in designing appropriate isolation media and interpreting physiological properties. We are currently using the database to aid in the isolation of a large number of cyanobacterial species and will present results by PI's and students demonstrating the utility of this new approach.

Bebout, Leslie↗
NASA NTRS2015

Laboratory Studies of Cosmic Dust with NASA Ames' COSmIC Facility – Applications to Interstellar and Planetary Issues

I will present and discuss the unique characteristics and capabilities of the laboratory facility, COSmIC, that was developed at NASA Ames to generate, process and analyze interstellar, circumstellar and planetary analogs in the laboratory. COSmIC stands for Cosmic Simulation Chamber and is dedicated to the study of molecules and ions under the low temperature and high vacuum conditions that are required to simulate interstellar, circumstellar and planetary physical environments in space. COSmIC integrates a variety of state-of-the-art instruments that allow forming, processing and monitoring simulated space conditions for planetary, circumstellar and interstellar materials in the laboratory. COSmIC is composed of a Pulsed Discharge Nozzle (PDN) expansion that generates a free jet supersonic expansion coupled to two ultrahigh-sensitivity, complementary in situ diagnostics: a Cavity Ring Down Spectroscopy (CRDS) system for photonic detection and a Reflectron Time-Of-Flight Mass Spectrometer (ReTOF-MS) for mass detection. Recent, unique, laboratory astrophysics results that were obtained using the capabilities of COSmIC will be discussed, in particular the progress that have been achieved in deciphering the diffuse interstellar bands (DIBs) and in monitoring in the laboratory the formation of solid dust grains from their gas-phase molecular precursors in environments as varied as stellarcircumstellar outflow and planetary atmospheres. Plans for future, next generation, laboratory experiments on cosmic molecules and grains in the growing field of laboratory astrophysics will also be addressed as well as the implications of these studies for current and upcoming space missions.

COSmIC↗
NASA NTRSDate not supplied

Analysis and Evaluation of NASA's MK40B Six-Component TASK Balance

The paper discusses the physical characteristics NASA's MK40B TASK balance. It is NASA's newest TASK balance that was optimized for the testing of wind tunnel models in the NASA Ames 11-ft Transonic Wind Tunnel. The calibration data of the MK40B balance was obtained in Calspan's Automatic Balance Calibration System. A machine load schedule design was used for the calibration that was developed at the NASA Ames Balance Calibration Laboratory. The calibration data was analyzed using both the Non-Iterative Method and the Iterative Method. Then, the chosen regression models of the calibration data were assessed and compared using the percent contribution, the variance inflation factor, and the calibration load residuals. Interactions of single-component loads were also quantified. In addition, the bi-directional characteristics of the six gage outputs of the balance were assessed by applying a semi-empirical test that was developed at the Ames Balance Calibration Laboratory. It was concluded that four of the six gages of the balance have bi-directional characteristics. Finally, the accuracy of the load prediction equations of the balance was tested by applying the equations to independent check load data that was obtained at the NASA Ames Balance Calibration Laboratory. The standard deviation of the check load residuals met expectations. The check load data also confirmed that the interactions of the forward and aft normal forces on the axial force gage output are very small. - This paper is to be presented in the invited special session titled: "65 Years of TASK Wind Tunnel Balances - Past, Present, and Future".

wind tunnel balance↗
DOE OSTI2025

Use of Frit‐Disc Crucible Sets to Make Solution Growth More Quantitative and Versatile

The recent availability of step‐edge, frit‐disc crucible sets (generally sold as Canfield Crucible Sets or CCS) has led to multiple innovations associated with the group's use of solution growth. The use of CCS allows for the clean separation of liquid from solid phases during the growth process. This clean separation enables the reuse of the decanted liquid, either allowing for simple, economic, savings associated with recycling expensive precursor elements or allowing for the fractionation of a growth into multiple, small steps, revealing the progression of multiple solidifications. Clean separation of liquid from solid phases also allows for the determination of the liquidus line (or surface) and the creation, or correction, of composition–temperature phase diagrams. The reuse of clean decanted liquid has also allowed to prepare liquids ideally suited for the growth of large single crystals of specific phases by tuning the composition of the melt to the optimal composition for growth of the desired phase, often with reduced nucleation sites. Finally, it is discussed how solution growth and CCS use can be harnessed to provide a plethora of composition–temperature data points defining liquidus lines or surfaces with differing degrees of precision to either test or anchor artificial intelligence and/or machine‐learning‐based attempts to augment and extend the limited experimentally determined database.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Magneto-optical study of Nb thin films for superconducting qubits

Abstract Among the recognized sources of decoherence in superconducting qubits, the spatial inhomogeneity of the superconducting state and the possible presence of magnetic-flux vortices remain comparatively underexplored. Niobium is commonly used as a structural material in transmon qubits that host Josephson junctions, and excess dissipation anywhere in the transmon can become a bottleneck that limits overall quantum performance. The metal/substrate interfacial layer may simultaneously host pair-breaking loss channels (e.g. two-level systems) and control thermal transport, thereby affecting dissipation and temperature stability. Here, we use quantitative magneto-optical imaging of the magnetic-flux distribution to characterize the homogeneity of the superconducting state and the critical current density, j c , in niobium films fabricated under different sputtering conditions. The imaging reveals distinct flux-penetration regimes, ranging from a nearly ideal Bean critical state to strongly nonuniform thermo-magnetic dendritic avalanches. By fitting the measured magnetic-induction profiles, we extract j c and try to correlate it with film physical properties and with measured qubit internal quality factors. Our results indicate that the Nb/Si interlayer can be a significant contributor to decoherence and should be considered an important factor that must be optimized.

Datta, Amlan [Ames National Laboratory; Iowa State↗
NASA NTRS1982

Holographic interferometry and tomography at Ames Research Center

A YAG laser holographic interferometer system and reconstruction laboratory for the Ames 2- by 2-Foot Transonic Wind Tunnel are discussed. This system provides dual plate and double pulse holography for quantitative and qualitative measurements, respectively. Interferometric measurements of two-dimensional airfoils and three-dimensional bodies of revolution for a tomography feasibility study were made. The two-dimensional work included supercritical airfoils, an oscillating airfoil undergoing dynamic stall, and a circulation control airfoil. The tomography experiments centered around hemispherical nose and tangent ogive models. In addition, the tomography work covered the development of a Fourier transform code for the retrieval of the three dimensional density distributions from the interferograms.

Lee, G.↗
NASA NTRS1996

Mechanisms of Bone Mineralization and Effects of Mechanical Loading

The data suggest that PTH and PKC inhibit nodule formation, and that alternative energy sources are utilized by osteoblasts in the process of mineralization. The conditions and techniques to grow, fix, photograph, and measure bone mineralization in vitro were defined. The results are presently in preliminary form and require further assessment as follows; quantitate the surface area of nodules + treatments via computer-aided image analysis; use PTH + inhibitors of signaling pathways to determine the mechanism of nodule formation; determine how protein kinase C is involved as a promotor of nodule formation; cell proliferation vs. cell death affected by modulation of signal transduction (i.e., PTH, enzyme inhibitors and activators); identify mRNA induced or decreased in response to PTH and signaling modulators that encode proteins that regulate cell morphology, proliferation, and nodule formation. Therefore, several follow-up studies between the laboratories at NASA-Ames Research Center and my laboratory at the University of Illinois have been initiated.

Babich, Michael↗
DOE OSTI2025

Electrochemical reduction of ammonia-captured CO 2 to CO over a nickel single-atom catalyst

Carbon reactive capture and conversion offers a sustainable route to valuable chemicals and fuels while aiding Green House Gas (GHG) reduction. Direct electrochemical conversion of capture solutions like bicarbonate avoids the energy demands of conventional CO 2 regeneration. Ammonium bicarbonate (NH 4 HCO 3 ) is particularly attractive due to its low decomposition temperature and ability to supply in situ CO 2 from dilute sources without requiring purified CO 2 . Meanwhile, single-atom catalysts (SACs) with nitrogen-coordinated metal sites further enhance CO 2 reduction efficiency using Earth-abundant materials. In this study, we demonstrate a nickel single-atom catalyst (Ni-SAC)-based electrolyzer that utilizes NH 4 HCO 3 as the CO 2 source, achieving significantly improved CO production performance compared to the conventional silver cathodes used in the CO 2 reduction reaction (CO 2 RR) to produce CO. The Ni-SAC cathode exhibited a Faradaic efficiency of 60.1% for CO production at −200 mA cm −2 , while the silver cathode achieved a Faradaic efficiency of only 2%, likely due to ammonium-induced poisoning. Furthermore, the integration of a customized microporous layer onto the electrode significantly increased the Faradaic efficiency from 64% to 83% at −100 mA cm −2 , emphasizing the crucial role of electrode structure optimization in enhancing CO selectivity. These findings demonstrate a sustainable and economically viable strategy for green CO production directly from CO 2 capture solutions.

30 DIRECT ENERGY CONVERSION↗