Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACETATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Thermal Conductivity of Polymer Copoly(Ethylene Vinyl Acetate)/Nano-Filler Blends

The development of flexible, thermally conductive fabrics and plastic tubes for the Liquid Cooling and Ventilation Garment (LCVG) are needed to reduce weight and improve the mobility, comfort, and performance of future spacesuits. Such improvements would allow astronauts to operate more efficiently and safely for extended extravehicular activities. As a continuation of our work on the improvement of thermal conductivity (TC) of polymeric materials, nanocomposites were prepared from copoly(ethylene vinyl acetate), trade name Elvax 260 , metallized carbon nanofibers (CNFs), nickel (Ni) nanostrands, boron nitride both alone and as mixtures with aluminum powder. The nanocomposites were prepared by melt mixing at various loading levels and subsequently fabricated into several material forms (i.e., ribbons, tubes, and compression molded plaques) for analysis. Ribbons and tubes were extruded to form samples in which the nanoparticles were aligned in the direction of flow. The degree of dispersion and alignment of the nanoparticles were investigated using high-resolution scanning electron microscopy. Tensile properties of the aligned samples were determined at room temperature. TC measurements were performed using a laser flash (Nanoflash ) technique. The TC of the samples was measured in both the direction of alignment as well as transverse. Tubing of comparable dimensions to that used in the LCVG was extruded from select compositions and the thermal conductivities of the tubes measured.

Ghose, S.↗

Thermal Conductivity of Ethylene Vinyl Acetate Copolymer/Carbon Nanofiller Blends

To reduce weight and increase the mobility, comfort, and performance of future spacesuits, flexible, thermally conductive fabrics and plastic tubes are needed for the Liquid Cooling and Ventilation Garment. Such improvements would allow astronauts to operate more efficiently and safely for extended extravehicular activities. As an approach to raise the thermal conductivity (TC) of an ethylene vinyl acetate copolymer (Elvax 260), it was compounded with three types of carbon based nanofillers: multi-walled carbon nanotubes (MWCNTs), vapor grown carbon nanofibers (CNFs), and expanded graphite (EG). In addition, other nanofillers including metallized CNFs, nickel nanostrands, boron nitride, and powdered aluminum were also compounded with Elvax 260 in the melt at various loading levels. In an attempt to improve compatibility between Elvax 260 and the nanofillers, MWCNTs and EG were modified by surface coating and through noncovalent and covalent attachment of organic molecules containing alkyl groups. Ribbons of the nanocomposites were extruded to form samples in which the nanofillers were aligned in the direction of flow. Samples were also fabricated by compression molding to yield nanocomposites in which the nanofillers were randomly oriented. Mechanical properties of the aligned samples were determined by tensile testing while the degree of dispersion and alignment of nanoparticles were investigated using high-resolution scanning electron microscopy. TC measurements were performed using a laser flash (Nanoflash ) technique. TC of the samples was measured in the direction of, and perpendicular to, the alignment direction. Additionally, tubing was also extruded from select nanocomposite compositions and the TC and mechanical flexibility measured.

Ghose, S.↗

Evaluation of the Interference of Tenax®TA Adsorbent With Dimethylformamide Dimethyl Acetal Reagent for Gas Chromatography-Dragonfly Mass Spectrometry and Future Gas Chromatography-Mass Spectrometry in Situ Analysis

Among future space missions, national aeronautics and space administration (NASA) selected two of them to analyze the diversity in organic content within Martian and Titan soil samples using a gas chromatograph – mass spectrometer (GC–MS) instrument. The Dragonfly space mission is planned to be launched in 2027 to Titan's surface and explore the Shangri-La surface region for years. One of the main goals of this mission is to understand the past and actual abundant prebiotic chemistry on Titan, which is not well characterized yet. The ExoMars space mission is planned to be launched in 2028 to Mars’ surface and explore the Oxia Planum and Mawrth Vallis region for years. The main objectives focus on the exploration of the subsurface soil samples, potentially richer in organics, that might be relevant for the search of past life traces on Mars where irradiation does not impact the matrices and organics. One recently used sample pre-treatment for gas chromatography – mass spectrometry analysis is planned on both space missions to detect refractory organic molecules of interest for astrobiology. This pre-treatment is called derivatization and uses a chemical reagent – called dimethylformamide dimethyl acetal (DMF-DMA) – to sublimate organic compounds keeping them safe from thermal degradation and conserving the chirality of the molecules extracted from Titan or Mars’ matrices. Indeed, the detection of building blocks of life or enantiomeric excess of some organics (e.g. amino acids) after DMF-DMA pre-treatment and GC–MS analyses would be both bioindicators. The main results highlighted by our work on DMF-DMA and Tenax®TA interaction and efficiency to detect organic compounds at ppb levels in a fast and single preparation are first that Tenax®TA did not show the onset of degradation until after 150 experiments – a 120 h at 300 °C experiment – which greatly exceeds the experimental lifetimes for the DraMS and GC-space in situ investigations. Tenax®TA polymer and DMF-DMA produce many by-products (about 70 and 46, respectively, depending on the activation temperature). Further, the interaction between the two leads to the production of 22 additional by-products from DMF-DMA degradation, but these listed by-products do not prevent the detection of trace-level organic molecules after their efficient derivatization and volatilization by DMF-DMA in the oven ahead the GC–MS trap and column.

DraMS-Dragonfly mission↗

Assessing the Role of Interfacial and Metal Sites in Pt/TiO2-Catalyzed Acetic Acid Hydrodeoxygenation

Thermochemical conversion of biomass to produce drop-in quality biofuels typically involves hydrodeoxygenation (HDO) steps following catalytic fast pyrolysis (CFP) to remove excess oxygen and create a more stable bio-oil product. HDO involves co-feeding the CFP vapor-phase product and H2 gas over a bi-functional catalyst. Reducible metal oxide-supported noble-metal catalysts (e.g., Pt/TiO2) are promising materials for HDO chemistry, with recent work aiming to elucidate the role of various Pt/TiO2 actives sites (i.e., Pt-metal, TiO2-support, Pt-TiO2-interfacial sites) in the competing desired deoxygenation and undesired decarboxylation/decarbonylation reactions for important classes of CFP vapor model compounds. Carboxylic acids are one important class of bio-derived compounds that has not been studied extensively for HDO on Pt/TiO2, particularly at the atomic level. Past experimental work evaluating Pt/C and Pt/TiO2 catalysts for acetic acid HDO (AA-HDO) demonstrated selectivity toward C-C and C-O bond-dissociation products, respectively. This work utilizes atomic-scale modeling to discern the role of Pt-metal and Pt-TiO2-interfacial sites in promoting key C-C bond-breaking, C-O bond-breaking, and (de)hydrogenation steps in AA-HDO. Using Pt(111) and Pt-TiO2-interface surface models, adsorption and reaction energetics calculated by density functional theory provide fundamental insights into the role of interfacial sites and oxygen vacancies in promoting desired deoxygenation pathways over undesired decarboxylation/decarbonylation pathways.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗

Effect Analysis of Nickel Ferrite (NiFe{sub 2}O{sub 4}) and Titanium Dioxide (TiO{sub 2}) Nanoparticles on CH{sub 4}/CO{sub 2} Gas Permeation Properties of Cellulose Acetate Based Mixed Matrix Membranes

Natural gas processing is very important industrial process. Major component of natural gas is methane, which is an increasingly utilized source of energy due to high thermal efficiency, while carbon dioxide act as an impurity and reduces its calorific value. In this research work, effects of nickel ferrite (NiFe{sub 2}O{sub 4}) and titanium dioxide (TiO{sub 2}) nanoparticles on the permeation properties of carbon dioxide (CO{sub 2}) and methane (CH{sub 4}) in cellulose acetate/polyethylene glycol (CA/PEG) membranes have been investigated. CA/PEG and CA/PEG based mixed matrix membranes (MMMs) are fabricated by using the solution casting method. Concentrations of TiO{sub 2} and NiFe{sub 2}O{sub 4} nanoparticles membranes are varied from 0 to 20 and 0 to 2 wt% respectively. Scanning electron microscope, tensile testing analysis, X-ray diffraction and thermal gravimetric analysis are used to characterize the fabricated membranes. Permeation study of these membranes has shown that in 5 wt%TiO{sub 2} MMMs, the permeability of CO{sub 2} and CH{sub 4} is increased up to 5.75 and 3.75 times as compared to pure polymer. By adding 1.5 wt% NiFe{sub 2}O{sub 4} in the polymer matrix, the permeability of CO{sub 2} and CH{sub 4} has improved up to 3.46 and 2.1 times as compared to pure polymer. It has been observed that the addition of inorganic nanoparticles in a polymer matrix helps to enhance the permeability of gases but it has little effect on CH{sub 4}/CO{sub 2} selectivity.

36 MATERIALS SCIENCE↗

The Effect of Zinc on the Structural, Electrical, and Mechanical Properties of YBCO-123 Superconducting Nanoparticles Prepared by an Acetate-Based Sol-Gel Process

In this study, zinc (Zn)-doped YBaCuO (YBCO)-123-based high-temperature superconducting samples were produced using the sol-gel method, which is commonly used for preparing nanosize materials. Zn ions were substituted by Cu ions (YBa{sub 2}Cu{sub 3-x}Zn{sub x}O), and Zn doping effects on structural, electrical, and mechanical properties of the YBCO-123 superconductors were examined in detail. Undoped sample was prepared under same conditions. X-ray diffraction analysis (XRD) was used to determine phase analysis and lattice parameters of the superconducting samples. To analyze the microstructure properties, scanning electron microscope (SEM) measurements were performed. Resistivity and microhardness measurements were also carried out for superconducting and mechanic properties, respectively. Vickers microhardness, young modulus, fracture toughness, and yield strength values of the samples were calculated. Microhardness measurements were analyzed using the Kick’s law, proportional sample resistance (PSR) model, EPD model, the Hays-Kendall (HK) approach, and indentation-induced cracking (IIC) model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Combination of Radiation Therapy and Short-Term Androgen Blockade With Abiraterone Acetate Plus Prednisone for Men With High- and Intermediate-Risk Localized Prostate Cancer

Long-term androgen-deprivation therapy (ADT) is the standard of care in combination with radiation therapy (RT) in high-risk prostate cancer (PC), despite substantial toxicity from the resulting hypogonadism. We hypothesized that a combination of more potent but shorter-term androgen inhibition in men with intermediate- or high-risk localized PC would synergize with definitive RT to provide short-term testosterone recovery and improve disease control.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Controlling oriented aggregation using increasing reagent concentrations and trihalo acetic acid surfactants

Zinc oxide particle growth from homogenous solutions prepared with isopropyl alcohol was monitored using in situ UV-vis spectroscopy, and results show that the rate of ZnO particle growth and the final ZnO nanoparticle size depend strongly upon the concentrations of precursors and the identity of surfactants used. In addition, particle size versus time data was fit using the coarsening model and the simultaneous oriented aggregation and coarsening model in order to evaluate the effect of changing synthetic variables on the mechanism of nanoparticle growth. In general, an increase in growth by oriented aggregation with increasing precursor concentrations was observed, a result that was consistent with results from high-resolution transmission electron microscopy (HRTEM) characterization. The increase in precursor concentrations resulted in an increase in the number concentration of ZnO nanoparticles, which resulted in a higher probability of particle-particle interactions and hence increased growth by oriented aggregation. Additionally, particle growth in solutions of trifluoro-, trichloro-, and tribromoacetate surfactants was studied, and growth by oriented aggregation followed the trend expected based on the number concentration of zinc oxide particles. Growth with trifluoroacetate was an exception, with growth by oriented aggregation substantially suppressed. - Graphical abstract: Zinc oxide particle growth from homogenous solutions prepared with isopropyl alcohol was monitored using in situ UV-vis spectroscopy. Oriented aggregation can be enhanced by increasing the number concentration of nanoparticles, which can be accomplished by increasing precursor concentrations. Furthermore, growth by oriented aggregation can be inhibited by employing an appropriate surfactant, such as trifluoroacetate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heterometallic M/Mn (M=Cu, Co, Zn) acetate complexes as precursors for binary oxides

A facile one-pot procedure, or so-called 'direct synthesis,' was used to prepare the novel heterometallic complexes [M{sub 2}Mn(OAc){sub 6}(bpy){sub 2}], where M=Cu (1), Co (2), Zn (3), bpy=2,2'-bipyridyl, with high yields via oxidative dissolution of pure metals in a liquid phase. The complexes were characterized by an elemental analysis, single crystal X-ray diffraction method and FTIR. These complexes are proposed as precursors, whose thermal degradation may lead to the formation of solids possessing nano- to microsize levels of dispersity. The thermal behavior of the complexes obtained was studied by thermal analysis (TG/DTA/DTG) in both air and N{sub 2} and also by TPD mass-spectrometry in vacuo. The FTIR, X-ray powder diffraction (PXRD) and thermoanalytical data were used for the identification of the solid products of thermal degradation. The morphology and microstructure of the solid residues were analyzed, using scanning electron microscopy with energy dispersive X-ray microanalysis (SEM/EDX) at mkm and sub-micro levels. -- Graphical abstract: The novel heterometallic complexes [M{sub 2}Mn(OAc){sub 6}(bpy){sub 2}] (M=Cu, Co, Zn, bpy=2,2'-bipyridyl) were isolated and used as precursors for low-temperature synthesis of binary oxides. Single crystal X-ray diffraction, FTIR, TG/DTA/DTG, TPD-MS, PXRD, SEM/EDX analysis was performed on complexes and powders. Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study on thermal properties and crystallization behavior of electron beam irradiated ethylene vinyl acetate (EVA)/waste tyre dust (WTD) blends in the presence of polyethylene graft maleic anhydride (PEgMAH)

The aim of this article is to show the effects of the electron beam irradiation dose and presence of a compatibiliser on the thermal properties and crystallinity of EVA/WTD blends. The purpose of applying electron beam radiation with doses range 50 to 200 kGy and adding a compatibiliser was to enhance the compatibility of the studied blends and at the same time to investigate the possibility of using this technique in the process of recycling polymeric materials. As the compatibilisers, the polyethylene grafted maleic anhydride (PEgMAH) was utilized, they were added at the amounts of 1-5 phr respectively. The enhancement of thermal properties was accompanied by the following effects, discussed in this article: i) an irradiated EVA/WTD blend at 200kGy was found to improve the thermal properties of EVA, ii) the addition of PEgMAH in EVA/WTD blends and the subsequent irradiation allowed prevention of degradation mechanism. iii) the ΔH{sub f} and crystallinity percentage decrease at higher PEgMAH content.

36 MATERIALS SCIENCE↗