Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wave propagation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

ATS-F millimeter wave propagation experiment data processing.

Review of the data processing program for the Applications Technology Satellite (ATS-F) scheduled for launch in 1973. The program consists of: (1) short term processing, which utilizes analog data recording and produces amplitude scintillation and time-frequency correlation studies; and (2) long term processing, which utilizes digitally recorded data to provide hourly and daily statistical output functions. The data acquisition and processing program planned for the ATS-F experiment provides a highly automated environment which emphasizes the unique requirements for the characterization of the propagation medium in the frequency bands required for the next generation of space communication systems.

Ippolito, L. J.↗
NASA NTRS1972

Elastic wave propagation in a joined cylindrical-conical-cylindrical shell.

The problem of longitudinal impact of a thin finite joined shell, consisting of a cylinder-truncated cone-cylinder, is analyzed both experimentally and analytically. The model analyzed is a 1/100 scale replica of a portion of the Apollo/Saturn V vehicle. Experimental results were obtained from a drop-test system. Longitudinal and circumferential strain pulses were monitored on each section of the joined shell. The velocity of the impacter ring prior to impact was measured and used as a boundary condition in the solution of the governing partial differential equations. A bending theory, including transverse shear, radial inertia, and rotary inertia effects, was used to analyze the finite joined shell. Good agreement between analytical and experimental strain profiles was obtained.

Rose, J. L.↗
NASA NTRS1972

ATS-F COMSAT millimeter wave propagation experiment.

Description of the transmitting and receiving system configurations to be used in an ATS-F propagation experiment designed to gather data on the attenuation of satellite uplink signals (at approximately 13.2 and 17.8 GHz) due to atmospheric hydrometeors (mostly rain). The data will be used for statistical determination of system power margins required for operational communications systems at frequencies above 10 GHz. A secondary analysis will study site diversity as a means of reducing the required system margins. A spacecraft transponder receives signals from 15 dual-frequency ground transmitter stations and retransmits these signals to a central ground receiving terminal at a frequency of 4 GHz.

Levatich, J. L.↗
NASA NTRS1974

Wave propagation and earth satellite radio emission studies

Radio propagation studies of the ionosphere using satellite radio beacons are described. The ionosphere is known as a dispersive, inhomogeneous, irregular and sometimes even nonlinear medium. After traversing through the ionosphere the radio signal bears signatures of these characteristics. A study of these signatures will be helpful in two areas: (1) It will assist in learning the behavior of the medium, in this case the ionosphere. (2) It will provide information of the kind of signal characteristics and statistics to be expected for communication and navigational satellite systems that use the similar geometry.

Yeh, K. C.↗
NASA NTRS1974

Non-linear wave propagation in acoustically lined circular ducts

An analysis is presented of the nonlinear effects of the gas motion as well as of the acoustic lining material on the transmission and attenuation of sound in a circular duct with a uniform cross-section and no mean flow. The acoustic material is characterized by an empirical, nonlinear impedance in which the instantaneous resistance is a nonlinear function of both the frequency and the acoustic velocity. The results show that there exist frequency bandwidths around the resonant frequencies in which the nonlinearity decreases the attenuation rate, and outside which the nonlinearity increases the attenuation rate, in qualitative agreement with experimental observations. Moreover, the effect of the gas nonlinearity increases with increasing sound frequency, whereas the effect of the material nonlinearity decreases with increasing sound frequency.

Nayfeh, A. H.↗
NASA NTRS1976

The leaking mode problem in atmospheric acoustic-gravity wave propagation

The problem of predicting the transient acoustic pressure pulse at long horizontal distances from large explosions in the atmosphere is examined. Account is taken of poles off the real axis and of branch line integrals in the general integral governing the transient waveform. Perturbation techniques are described for the computation of the imaginary ordinate of the poles and numerical studies are described for a model atmosphere terminated by a halfspace with c = 478 m/sec above 125 km. For frequencies less than 0.0125 rad/sec, the GR sub 1 mode, for example, is found to have a frequency dependent amplitude decay of the order of 0.0001 nepers/km. Examples of numerically synthesized transient waveforms are exhibited with and without the inclusion of leaking modes. The inclusion of leaking modes results in waveforms with a more marked beginning rather than a low frequency oscillating precursor of gradually increasing amplitude. Also, the revised computations indicate that waveforms invariably begin with a pressure rise, a result supported by other theoretical considerations and by experimental data.

Kinney, W. A.↗
NASA NTRS1976

Data analysis report on ATS-F COMSAT millimeter wave propagation experiment, part 1

The 13/18 GHz COMSAT Propagation Experiment (CPE) was performed to measure attenuation caused by hydrometeors along slant paths from transmitting terminals on the ground to the ATS-6 satellite. The effectiveness of site diversity in overcoming this impairment was also studied. Problems encountered in assembling a valid data base of rain induced attenuation data for statistical analysis are considered. The procedures used to obtain the various statistics are then outlined. The graphs and tables of statistical data for the 15 dual frequency (13 and 18 GHz) site diversity locations are discussed. Cumulative rain rate statistics for the Fayetteville and Boston sites based on point rainfall data collected are presented along with extrapolations of the attenuation and point rainfall data.

Hyde, G.↗
NASA NTRS1976

ATS-6 mm-wave propagation experiment

Attenuation on a Space-to-Earth path was measured at 20 GHz for a ground terminal at approximately 1 km elevation in an arid (16 cm annual precipitation) region of eastern Washington state. Precipitation intensity and radiometric sky temperature at 20 GHz were also measured. Attenuation greater than 1 dB was observed only in the presence of wet snow on antenna surfaces. Ten thousand (10,000) hours of radiometric sky temperature data recorded over an 18-month period indicated atmospheric attenuation of 5 to 7 dB during two instances of rain intensity of approximately 1 inch per hour.

Davis, C. C.↗
NASA NTRS1978

Millimeter wave propagation modeling of inhomogeneous rain media for satellite communications systems

A theoretical propagation model that represents the scattering properties of an inhomogeneous rain often found on a satellite communications link is presented. The model includes the scattering effects of an arbitrary distribution of particle type (rain or ice), particle shape, particle size, and particle orientation within a given rain cell. An associated rain propagation prediction program predicts attenuation, isolation and phase shift as a function of ground rain rate. A frequency independent synthetic storm algorithm is presented that models nonuniform rain rates present on a satellite link. Antenna effects are included along with a discussion of rain reciprocity. The model is verified using the latest available multiple frequency data from the CTS and COMSTAR satellites. The data covers a wide range of frequencies, elevation angles, and ground site locations.

Persinger, R. R.↗
NASA NTRS1978

The phase of the crosspolarized signal generated by millimeter wave propagation through rain

Proposed schemes for cancelling rain-induced crosstalk in dual-polarized communications systems depend upon the phase relationships between the wanted and unwanted signals. This report investigates the phase relationship of the rain-generated crosspolarized signal relative to the copolarized signal. Theoretical results obtained from a commonly accepted propagation model are presented. Experimental data from the Communications Technology Satellite beacon and from the Comstar beacon are presented and the correlation between theory and data is discussed. An inexpensive semi-adaptive cancellation system is proposed and its performance expectations are presented. The implications of phase variations on a cancellation system are also discussed.

Overstreet, W. P.↗
NASA NTRS1978

OSO 8 observations of wave propagation in the solar chromosphere and transition region

The University of Colorado instrument on OSO 8 has been used to observe relative phases of the 300-s intensity variation between the temperature-minimum region and several emission lines formed in the solar chromosphere and chromosphere-corona transition region. The lines used are due to Fe II, Si II, C II, Si IV, and C IV. The scattered light in the spectrograph, which originates almost entirely in the spectral region between 1700 and 1900 A, was used as a probe of the temperature-minimum region. The lines of Fe II, Si II, and C II show almost identical delays of approximately 30 s relative to the temperature minimum, while the intensity oscillations of the lines of Si IV and C IV appear to lead the temperature-minimum intensity oscillations by about 10 s.

Chipman, E. G.↗
NASA NTRS1980

Proceedings of the Aero-Optics Symposium on Electromagnetic Wave Propagation from Aircraft

Data are presented from a series of wind-tunnel and flight experiments concerning natural and induced turbulence around an airplane, and the effects on propagation characteristics of an emitter mounted in the airplane. Some of the papers are concerned with phase distortion of the propagating radiation, and others deal with mechanical jitter of the optical elements when exposed to open-cavity turbulence. The results include both aerodynamic and optical measurements and a consideration of the relationship between the two. Primary emphasis is on the dynamic disturbances, but theoretical and experimental evaluations of steady-state distortions are also presented.

Aerodynamics of bodies↗
NASA NTRS1982

Wave propagation in graphite/epoxy laminates due to impact

The low velocity impact response of graphite-epoxy laminates is investigated theoretically and experimentally. A nine-node isoparametric finite element in conjunction with an empirical contact law was used for the theoretical investigation. Flat laminates subjected to pendulum impact were used for the experimental investigation. Theoretical results are in good agreement with strain gage experimental data. The collective results of the investigation indicate that the theoretical procedure describes the impact response of the laminate up to about 150 in/sec. impact velocity.

Tan, T. M.↗
NASA NTRS1984

Quantitative non-destructive evaluation of composite materials based on ultrasonic wave propagation

The size, shape, and orientation of damage correlates well between the polar backscatter technique and the deply technique. There is good quantitative correlation between the areas of damage indicated by the two techniques. These results suggest that the polar backscatter technique is sensitive to specific orientations of damage. The polar backscatter technique provides a good qualitative image of the size and shape of the largest zone of damage in each of the principal orientations. A quantitative estimate of the extent of these largest damage zones is obtained from the polar backscatter technique. The selective sensitivity of polar backscatter provides a useful tool for further studies of the mechanisms of impact damage in graphite fiber reinforced composite laminates.

Miller, J. G.↗