Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wave data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

A laboratory study of the electromagnetic bias of rough surface scattering by water waves

The design, development, and use of a focused-beam radar to measure the electromagnetic bias introduced by the scattering of radar waves by a roughened water surface are discussed. The bias measurements were made over wide ranges of environmental conditions in a wavetank laboratory. Wave-elevation data were provided by standard laboratory capacitance probes. Backscattered radar power measurements coincident in time and space with the elevation data were produced by the radar. The two data sets are histogrammed to produce probability density functions for elevation and radar reflectivity, from which the electromagnetic bias is computed. The experimental results demonstrate that the electromagnetic bias is quite variable over the wide range of environmental conditions that can be produced in the laboratory. The data suggest that the bias is dependent upon the local wind field and on the amplitude and frequency of any background wave field that is present.

Parsons, Chester L.↗
NASA NTRS2017

The Nanograv Nine-Year Data Set: Measurement and Analysis of Variations in Dispersion Measures

We analyze dispersion measure(DM) variations of 37 millisecond pulsars in the nine-year North American Nanohertz Observatory for Gravitational Waves (NANOGrav) data release and constrain the sources of these variations. DM variations can result from a changing distance between Earth and the pulsar, inhomogeneities in the interstellar medium, and solar effects. Variations are significant for nearly all pulsars, with characteristic timescales comparable to or even shorter than the average spacing between observations. Five pulsars have periodic annual variations, 14 pulsars have monotonically increasing or decreasing trends, and 14 pulsars show both effects. Of the four pulsars with linear trends that have line-of-sight velocity measurements, three are consistent with a changing distance and require an overdensity of free electrons local to the pulsar. Several pulsars show correlations between DM excesses and lines of sight that pass close to the Sun. Mapping of the DM variations as a function of the pulsar trajectory can identify localized interstellar medium features and, in one case, an upper limit to the size of the dispersing region of 4 au. Four pulsars show roughly Kolmogorov structure functions (SFs), and another four show SFs less steep than Kolmogorov. One pulsar has too large an uncertainty to allow comparisons. We discuss explanations for apparent departures from a Kolmogorov-like spectrum, and we show that the presence of other trends and localized features or gradients in the interstellar medium is the most likely cause.

pulsars: general↗
NASA NTRS2013

System and method for phase retrieval for radio telescope and antenna control

Disclosed herein are systems, methods, and non-transitory computer-readable storage media for radio phase retrieval. A system practicing the method gathers first data from radio waves associated with an object observed via a first aperture, gathers second data from radio waves associated with the object observed via an introduced second aperture associated with the first aperture, generates reduced noise data by incoherently subtracting the second data from the first data, and performs phase retrieval for the radio waves by modeling the reduced noise data using a single Fourier transform. The first and second apertures are at different positions, such as side by side. This approach can include determining a value Q which represents a ratio of wavelength times a focal ratio divided by pixel spacing. This information can be used to accurately measure and correct alignment errors or other optical system flaws in the apertures.

Dean, Bruce H.↗
NASA NTRS1984

A Crustal Structure Study of South America

Variations in the average crustal thickness of the South American platform were determined by measuring fundamental mode Rayleigh wave dispersion between nine pairs of South American WWSSN seismograph stations and inverting the measurements to obtain average shear wave velocity-depth models across the platform. Additional models were derived from the Rayleigh wave dispersion data previously measured over eastern South America. Both sets of models were interpreted in terms of average crustal thickness and average crustal shear wave velocity. The results obtained were depicted in a contour map of crustal thickness. Average values for seismic velocities in the crust and upper mantle were calculated and compared with maps of regional gravity models, MAGSAT magnetic anomalies, and major tectonic features. The correlations and relationships discovered are discussed.

Renbarger, K. S.↗
NASA NTRS1972

A comparison of techniques for inversion of radio-ray phase data in presence of ray bending

Derivations are presented of the straight-line Abel transform and the seismological Herglotz-Wiechert transform (which takes ray bending into account) that are used in the reconstruction of refractivity profiles from radio-wave phase data. Profile inversion utilizing these approaches, performed in computer-simulated experiments, are compared for cases of positive, zero, and negative ray bending. For thin atmospheres and ionospheres, such as the Martian atmosphere and ionosphere, radio wave signals are shown to be inverted accurately with both methods. For dense media, such as the solar corona or the lower Venus atmosphere, the refractive recovered by the seismological Herglotz-Wiechert transform provide a significant improvement compared with the straight-line Abel transform.

Wallio, H. A.↗
DOE OSTI2021

MBARI WEC 2021 deployment

This dataset includes data from the Monterey Bay Aquarium Research Institute (MBARI) wave energy converter (WEC) and a nearby located Sofar Spotter buoy. The Monterey Bay Aquarium Research Institute has developed and deployed a small two-body point absorber wave energy device suitable to autonomous underwater vehicle, sensor system, and even aquaculture farm needs. For more information on the MBARI WEC see the research journal attached in the submission.

16 TIDAL AND WAVE POWER↗
NASA NTRS2017

Biomass Retrieval from L-Band Polarimetric UAVSAR Backscatter and PRISM Stereo Imagery

The forest above-ground biomass (AGB) and spatial distribution of vegetation elements have profound effects on the productivity and biodiversity of terrestrial ecosystems. In this paper, we evaluated biomass estimation from L-band Synthetic Aperture Radar (SAR) data acquired by National Aeronautics and Space Administration (NASA) Uninhabited Aerial Vehicle SAR (UAVSAR) and the improvement of accuracy by adding canopy height information derived from stereo imagery acquired by Japan Aerospace Exploration Agency (JAXA) Panchromatic Remote Sensing Instrument for Stereo Mapping (PRISM) on-board the Advanced Land Observing Satellite (ALOS). Various models for prediction of forest biomass from UAVSAR data were investigated at pixel sizes of 1/4 ha (50 m x 50 m) and 1 ha. The variance inflation factor (VIF) was calculated for each of the explanatory variables in multivariable regression models to assess the multi-collinearity between explanatory variables. In addition, the t-and p-values were used to interpret the significance of the coefficients of each explanatory variables. The R(exp. 2), Root Mean Square Error (RMSE), bias and Akaike information criterion (AIC), and leave-one-out cross-validation (LOOCV) and bootstrapping were used to validate models. At 1/4-ha scale, the R(exp. 2) and RMSE of biomass estimation from a model using a single track of polarimetric UAVSAR data were 0.59 and 52.08 Mg/ha. With canopy height from PRISM as additional independent variable, R(exp. 2) increased to 0.76 and RMSE decreased to 39.74 Mg/ha (28.24%). At 1-ha scale, the RMSE of biomass estimation based on UAVSAR data of a single track was 39.42 Mg/ha with a R(exp. 2) of 0.77. With the canopy height from PRISM, R(exp. 2) increased to 0.86 and RMSE decreased to 29.47 Mg/ha (20.18%). The models using UAVSAR data alone underestimated biomass at levels above approximately 150 Mg/ha showing the saturation phenomenon. Adding canopy height from PRISM stereo imagery significantly improved the biomass estimation and elevated the saturation level in estimating biomass. Combined use of UAVSAR data acquired from opposite directions (odd and even tracks) slightly improved the biomass estimation.Combined use of UAVSAR data acquired from opposite directions (odd and even tracks) slightly improved the biomass estimation at 1/4-ha scale, R(exp. 2) increased from 0.59 to 0.66 and RMSE reduced from 52.08 to 48.57 Mg/ha. Averaging multiple acquisitions of UAVSAR data from the same look azimuth direction did not improve biomass estimation. A biomass map derived from NASA's LVIS (Laser Vegetation Imaging System) wave-form data was used as a reference for evaluation of the biomass maps from these models. The study has also shown that the errors decreased when deciduous, evergreen, and mixed forests were modeled separately but the improvement was not significant

Zhang, Zhiyu↗
NASA NTRS1982

Research on the noise produced by large scale structure in supersonic jets

Using a dual electrode glow discharge excitation device, a method of mode selection into either the n = 0 or n = + or - 1 azimuthal modes was developed and tested by Fourier analyzing experimental azimuthal phase and amplitude data. On a M = 2.1 moderate Reynolds number (Re = 68,000) jet with a laminar boundary layer, under n = 0 or n = +1 excitation, coherent axial wave evolution, mean flow, and sound pressure level directivity measurements were performed. The boundary layer of this same jet was excited usng a grit coating on the nozzle wall, and bandpassed axial wave evolution data obtained and compared to the masurements made by previous workers on a conventional high Reynolds number jet (Re = 5,000,000) using a hot-film type probe.

Mclaughlin, D. K.↗
NASA NTRS1989

A case study of wave-current interaction near an oceanic front

High resolution directional wave spectrum data were obtained from two NASA airborne radars during the Frontal Air-Sea Interaction Experiment in February 1986. The observations show a significant change in the wave number spectrum across the front. On the basis of surveys from a towed sensor and on satellite imagery, the front location and current field are estimated. A numerical model is developed for the wave-current interaction and is used to model the wave refraction across the frontal current. A parametric study is performed to demonstrate the effects of current meandering. The main consequence of meandering is the formation of caustics and shadow zone regions in which the wave energy is significantly enhanced or reduced. Spectral simulation along the aircraft track reveals a reduction of more that 60 percent in wave energy in the shadow zone; this is consistent with the observations.

Liu, A. K.↗
DOE OSTI2020

Gas Hydrate Saturation Estimation Form Acoustic Log Data in the 2018 Alaska North Slope Hydrate-01 Stratigraphic Test

Completed in December 2018, the Alaska North Slope Hydrate 01 stratigraphic test well provides a wealth of logging-while-drilling (LWD) data for strata to below the base of gas hydrate stability (BGHS). This well is intended to be the first of three wells drilled for a comprehensive long-term gas hydrate production test conducted by the National Energy Technology Laboratory, the Japan Oil, Gas and Metals National Corporation, and the U.S. Geological Survey (USGS). The Hydrate 01 stratigraphic test well confirmed the presence of gas hydrate in two sand reservoirs within the hydrate stability zone, indicating the suitability of this location for a long-term gas hydrate production test.<p>The USGS, using an effective-medium-theory rock-physics approach, has estimated gas hydrate saturations from compressional (P) and shear (S) wave log data acquired in the Hydrate 01 well. We assume that gas hydrate occurs as pore-filling load-bearing material (i.e., part of the grain matrix). For Unit D, approximately 500 feet above the BGHS, both P-wave and S-wave acoustic logs indicate moderate gas hydrate saturations with S-wave results slightly lower than those for P-waves. For the Unit B, located just above the BGHS, we obtain moderate to high gas hydrate saturation estimates from both sonic logs. Our P-wave saturation estimates agree well with results from electrical-resistivity-based estimates, whereas estimates from nuclear magnetic resonance LWD data generally suggest 5 to 10 percent higher saturations; our S-wave results suggest lower saturations. These differences likely indicate complexities in the form of gas hydrate occurrence within the sediment pore space, potentially including differences between hydrate occurrence in Units D and B.</p>

Haines, Seth↗
DOE OSTI2024

Evaluating Physics-Informed Neural Network Performance for Seismic Discrimination between Earthquakes and Explosions

In this article, we evaluate adding a weak physics constraint, that is, a physics‐based empirical relationship, to the loss function with a physics‐informed manner in local distance explosion discrimination in the hope of improving the generalization capability of the machine learning (ML) model. We compare the proposed model with the two‐branch model we previously developed, as well as with a pure data‐driven model. Unexpectedly, the proposed model did not consistently outperform the pure data‐driven model. By varying the level of inconsistency in the training data, we find this approach is modulated by the strength of the physics relationship. In conclusion, this result has important implications for how to best incorporate physical constraints in ML models.

58 GEOSCIENCES↗
DOE OSTI2025

Bayesian Inference for the Seismic Moment Tensor Using Regional Waveforms and Teleseismic- P Polarities with a Data-Derived Distribution of Velocity Models and Source Locations

The largest source of uncertainty in any source inversion is the velocity model used in the transfer function that relates observed ground motion to the seismic moment tensor. However, standard inverse procedure often does not quantify uncertainty in the seismic moment tensor due to error in the Green’s functions from uncertain event location and Earth structure. Here, we incorporate this uncertainty into an estimation of the seismic moment tensor using a data-derived distribution of velocity models based on complementary geophysical data sets, including thickness constraints, velocity profiles, gravity data, surface-wave group velocities, and regional body-wave travel times. The data-derived distribution of velocity models is then used as a prior distribution of Green’s functions for use in Bayesian inference of an unknown seismic moment tensor using regional and teleseismic-P waveforms. The use of multiple data sets is important for gaining resolution to different components of the moment tensor. The combined likelihood is estimated using data-specific error models and the posterior of the seismic moment tensor is estimated and interpreted in terms of the most probable source type.

58 GEOSCIENCES↗
DOE OSTI2023

Gulf of Mexico Risk Analysis Database (GoMRAD)

The Gulf of Mexico Risk Analysis Database is comprehensive Esri geodatabase of vector layers, raster layers, and tables curated for risk analysis within the offshore Gulf of Mexico. Datasets include bathymetry, seafloor characteristics (channels, anomalies, faults, etc.), MetOcean data (wind speed, wave height, etc.), ocean current data, sediment data, and machine learning training regions used in NETL's Ocean & Geohazard Analysis (OGA) tool. This database serves as a compliment to the OGA tool by providing many of the datasets used in the design of the OGA tool, including regions used for machine learning. This database also serves as a valuable resource for risk analysis studies within the offshore Gulf of Mexico. This work was completed under the Advanced Offshore Research Portfolio, FWP Number: 1022476.

BOEM,Bathymetry,Gulf Of Mexico,Machine Learning,Me↗
NASA NTRS1984

Analysis of spacecraft data

A software program for the production and analysis of data from the Dynamics Explorer-A (DE-A) satellite was maintained and modified and new software initiated. A capability was developed to process DE-A plasma-wave instrument mission analysis files on the Tektronic 4027 color CRT, for which two programs were written. The algorithm for the calibration lookup table for the plasma-wave instrument data was modified and verified, and a production program to generate color FR-80 spectrograms was written.

Source record↗
NASA NTRS1989

Rocket observations of the precipitation of electrons by ground VLF transmitters

Recent results obtained with electric and magnetic receivers aboard a NASA sounding rocket launched on July 31, 1987 are presented which relate multiple electron spectral peaks observed in the bounce loss cone fluxes to the resonant interaction of electrons with VLF waves from ground transmitters. The correlation of transmitter signals passing through the ionosphere with the precipitated electrons was investigated. The analysis of these in situ wave and particle data addresses the propagation of waves through the ionosphere, and, through an application of the resonant theory, enables an estimation of the cold plasma density in the interaction region.

Arnoldy, Roger L.↗
NASA NTRS1996

Macroscopic balance model for wave rotors

A mathematical model for multi-port wave rotors is described. The wave processes that effect energy exchange within the rotor passage are modeled using one-dimensional gas dynamics. Macroscopic mass and energy balances relate volume-averaged thermodynamic properties in the rotor passage control volume to the mass, momentum, and energy fluxes at the ports. Loss models account for entropy production in boundary layers and in separating flows caused by blade-blockage, incidence, and gradual opening and closing of rotor passages. The mathematical model provides a basis for predicting design-point wave rotor performance, port timing, and machine size. Model predictions are evaluated through comparisons with CFD calculations and three-port wave rotor experimental data. A four-port wave rotor design example is provided to demonstrate model applicability. The modeling approach is amenable to wave rotor optimization studies and rapid assessment of the trade-offs associated with integrating wave rotors into gas turbine engine systems.

Welch, Gerard E.↗
NASA NTRS1993

Ultrasonic System Measures Elastic Properties Of Composites

Measurements with leaky Lamb waves yield data on properties and defects of panels. System nondestructively measures elastic properties of, and defects in, panel of laminated fiber/matrix material. Ultrasonic transducers operating in pitch/catch mode excite and detect leaky Lamb waves in specimen. Elastic properties of specimen and defects within it characterized from dispersion curves of Lamb waves.

Bar-Cohen, Yoseph↗
DOE OSTI2020

Wave-by-Wave Forecasting via Assimilation of Marine Radar Data

Abstract This work describes a phase-resolving wave-forecasting algorithm that is based on the assimilation of marine radar image time series. The algorithm is tested against synthetic data and field observations. The algorithm couples X-band marine radar observations with a phase-resolving wave model that uses the linear mild slope equations for reconstruction of water surface elevations over a large domain of O (km) and a prescribed time window of O (min). The reconstruction also enables wave-by-wave forecasting through forward propagation in space and time. Marine radar image time series provide the input wave observations through a previously given relationship between backscatter intensity and the radial component of the sea surface slope. The algorithm assimilates the wave slope information into the model via a best-fit wave source function at the boundary that minimizes the slope reconstruction error over an annular region at the outer ranges of the radar images. The wave model is then able to propagate the waves across a polar domain to a location of interest at nearer ranges. The constraints on the method for achieving real-time forecasting are identified, and the algorithm is verified against synthetic data and tested using field observations.

Engineering↗