Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “virtual engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Stabilizing the Power System in 2035 and Beyond: Evolving from Grid-Following to Grid-Forming Distributed Inverter Controllers (Final Technical Report)

Under existing grid operations, large synchronous generators provide sufficient rotational inertia to form a rigid backbone for the bulk power system. With photovoltaics (PV) forecasted to provide more than 600 GW of generation by 2050 under the U.S. Department of Energy’s SunShot Initiative objectives, however, it is clear that power electronic inverters will play a dominant role in future systems, and low-inertia stability must be ensured to maintain system reliability. Today, the risks to system stability can be observed on geographically small islands, such as Hawaii, which contain a relatively large amount of installed PV. These risks stem from a fundamental shortcoming of contemporary control strategies—existing inverter controllers cannot guarantee grid stability. Given that future power systems driven by sustainable resources will be characterized by low inertia, locations such as Hawaii provide a glimpse into the obstacles facing future power systems. Considering these challenges, the aim of this project was to develop and demonstrate distributed inverter controllers that enable the reliable control of low-inertia power systems with hundreds of gigawatts of integrated PV.

14 SOLAR ENERGY↗

Workshop on Materials & Manufacturing for Marine Energy Technologies (Summary Report: October 5, 2021)

The U.S. Department of Energy’s Water Power Technologies Office (WPTO) enables research, testing, development, and commercialization of emerging technologies to advance marine energy, as well as next-generation hydropower and pumped storage systems, for a flexible, reliable grid. This report summarizes the results of a WPTO-sponsored public workshop held virtually on October 5, 2021.

13 HYDRO ENERGY↗

Rational Design of Electrocatalysts for Maximizing CO2 Electrolysis Performance

This virtual invited talk in the session " Electrocatalysis and Energy”) at the International Conference on Catalysis Science and Chemical Engineering (CatScience 2024) will briefly overview diverse research areas of NETL to advance energy and environmental sustainability along with carbon management to achieve net zero emissions by 2050. Subsequently, the talk will primarily discuss how rational design of novel electrocatalysts would maximize the CO2 conversion in different cell configurations.

Nguyen Phan, Thuy Duong↗

Development and application of virtual reality for man/systems integration

While the graphical presentation of computer models signified a quantum leap over presentations limited to text and numbers, it still has the problem of presenting an interface barrier between the human user and the computer model. The user must learn a command language in order to orient themselves in the model. For example, to move left from the current viewpoint of the model, they might be required to type 'LEFT' at a keyboard. This command is fairly intuitive, but if the viewpoint moves far enough that there are no visual cues overlapping with the first view, the user does not know if the viewpoint has moved inches, feet, or miles to the left, or perhaps remained in the same position, but rotated to the left. Until the user becomes quite familiar with the interface language of the computer model presentation, they will be proned to lossing their bearings frequently. Even a highly skilled user will occasionally get lost in the model. A new approach to presenting type type of information is to directly interpret the user's body motions as the input language for determining what view to present. When the user's head turns 45 degrees to the left, the viewpoint should be rotated 45 degrees to the left. Since the head moves through several intermediate angles between the original view and the final one, several intermediate views should be presented, providing the user with a sense of continuity between the original view and the final one. Since the primary way a human physically interacts with their environment should monitor the movements of the user's hands and alter objects in the virtual model in a way consistent with the way an actual object would move when manipulated using the same hand movements. Since this approach to the man-computer interface closely models the same type of interface that humans have with the physical world, this type of interface is often called virtual reality, and the model is referred to as a virtual world. The task of this summer fellowship was to set up a virtual reality system at MSFC and begin applying it to some of the questions which concern scientists and engineers involved in space flight. A brief discussion of this work is presented.

Brown, Marcus↗

Development of visual 3D virtual environment for control software

Virtual environments for software visualization may enable complex programs to be created and maintained. A typical application might be for control of regional electric power systems. As these encompass broader computer networks than ever, construction of such systems becomes very difficult. Conventional text-oriented environments are useful in programming individual processors. However, they are obviously insufficient to program a large and complicated system, that includes large numbers of computers connected to each other; such programming is called 'programming in the large.' As a solution for this problem, the authors are developing a graphic programming environment wherein one can visualize complicated software in virtual 3D world. One of the major features of the environment is the 3D representation of concurrent process. 3D representation is used to supply both network-wide interprocess programming capability (capability for 'programming in the large') and real-time programming capability. The authors' idea is to fuse both the block diagram (which is useful to check relationship among large number of processes or processors) and the time chart (which is useful to check precise timing for synchronization) into a single 3D space. The 3D representation gives us a capability for direct and intuitive planning or understanding of complicated relationship among many concurrent processes. To realize the 3D representation, a technology to enable easy handling of virtual 3D object is a definite necessity. Using a stereo display system and a gesture input device (VPL DataGlove), our prototype of the virtual workstation has been implemented. The workstation can supply the 'sensation' of the virtual 3D space to a programmer. Software for the 3D programming environment is implemented on the workstation. According to preliminary assessments, a 50 percent reduction of programming effort is achieved by using the virtual 3D environment. The authors expect that the 3D environment has considerable potential in the field of software engineering.

Hirose, Michitaka↗

Co- and/or post-translational modifications are critical for TCH4 XET activity

TCH4 encodes a xyloglucan endotransglycosylase (XET) of Arabidopsis thaliana. XETs endolytically cleave and religate xyloglucan polymers; xyloglucan is one of the primary structural components of the plant cell wall. Therefore, XET function may affect cell shape and plant morphogenesis. To gain insight into the biochemical function of TCH4, we defined structural requirements for optimal XET activity. Recombinant baculoviruses were designed to produce distinct forms of TCH4. TCH4 protein engineered to be synthesized in the cytosol and thus lack normal co- and post-translational modifications is virtually inactive. TCH4 proteins, with and without a polyhistidine tag, that harbor an intact N-terminus are directed to the secretory pathway. Thus, as predicted, the N-terminal region of TCH4 functions as a signal peptide. TCH4 is shown to have at least one disulfide bond as monitored by a mobility shift in SDS-PAGE in the presence of dithiothreitol (DTT). This disulfide bond(s) is essential for full XET activity. TCH4 is glycosylated in vivo; glycosidases that remove N-linked glycosylation eliminated 98% of the XET activity. Thus, co- and/or post-translational modifications are critical for optimal TCH4 XET activity. Furthermore, using site-specific mutagenesis, we demonstrated that the first glutamate residue of the conserved DEIDFEFL motif (E97) is essential for activity. A change to glutamine at this position resulted in an inactive protein; a change to aspartic acid caused protein mislocalization. These data support the hypothesis that, in analogy to Bacillus beta-glucanases, this region may be the active site of XET enzymes.

NASA Discipline Cell Biology↗

Robotics virtual rail system and method

A virtual track or rail system and method is described for execution by a robot. A user, through a user interface, generates a desired path comprised of at least one segment representative of the virtual track for the robot. Start and end points are assigned to the desired path and velocities are also associated with each of the at least one segment of the desired path. A waypoint file is generated including positions along the virtual track representing the desired path with the positions beginning from the start point to the end point including the velocities of each of the at least one segment. The waypoint file is sent to the robot for traversing along the virtual track.

42 ENGINEERING↗

The NASA Augmented/Virtual Reality Lab: The State of the Art at KSC

The NASA Augmented Virtual Reality (AVR) Lab at Kennedy Space Center is dedicated to the investigation of Augmented Reality (AR) and Virtual Reality (VR) technologies, with the goal of determining potential uses of these technologies as human-computer interaction (HCI) devices in an aerospace engineering context. Begun in 2012, the AVR Lab has concentrated on commercially available AR and VR devices that are gaining in popularity and use in a number of fields such as gaming, training, and telepresence. We are working with such devices as the Microsoft Kinect, the Oculus Rift, the Leap Motion, the HTC Vive, motion capture systems, and the Microsoft Hololens. The focus of our work has been on human interaction with the virtual environment, which in turn acts as a communications bridge to remote physical devices and environments which the operator cannot or should not control or experience directly. Particularly in reference to dealing with spacecraft and the oftentimes hazardous environments they inhabit, it is our hope that AR and VR technologies can be utilized to increase human safety and mission success by physically removing humans from those hazardous environments while virtually putting them right in the middle of those environments.

Little, William↗

Enhanced Synchronization Stability of Grid-Forming Inverters With Passivity-Based Virtual Oscillator Control

In this article, a passivity-based virtual oscillator control strategy with enhanced synchronization stability for grid-forming inverters (GFMs) is proposed. By adopting the port-controlled Hamiltonian system theory for orbital stabilization problems, an energy pumping-and-damping block is proposed to render GFMs globally asymptotically stable with respect to the prespecified solutions of the power-flow equations from any initial condition. This allows for stable integrations of GFMs to any other globally asymptotically stable systems without their explicit knowledge, e.g., helping maintain synchronism with the bulk power system in a wide range of short-circuit-ratio conditions or under large disturbances and keeping synchronism among multiple GFMs in power systems. Herein, both simulations and experiments are presented to demonstrate the proposed control approach.

42 ENGINEERING↗

A VR-based volumetric medical image segmentation and visualization system with natural human interaction

Volume rendering produces informative two-dimensional (2D) images from a 3-dimensional (3D) volume. It highlights the region of interest and facilitates a good comprehension of the entire data set. However, volume rendering faces a few challenges. First, a high-dimensional transfer function is usually required to differentiate the target from its neighboring objects with subtle variance. Unfortunately, designing such a transfer function is a strenuously trial-and-error process. Second, manipulating/visualizing a 3D volume with a traditional 2D input/output device suffers dimensional limitations. To address all the challenges, we design NUI-VR 2 , a natural user interface-enabled volume rendering system in the virtual reality space. NUI-VR 2 marries volume rendering and interactive image segmentation. It transforms the original volume into a probability map with image segmentation. A simple linear transfer function will highlight the target well in the probability map. More importantly, we set the entire image segmentation and volume rendering pipeline in an immersive virtual reality environment with a natural user interface. NUI-VR 2 eliminates the dimensional limitations in manipulating and perceiving 3D volumes and dramatically improves the user experience.

42 ENGINEERING↗

Design Thinking, Lean Startup, and High-Technology Marketing for Human-Centered Systems Engineering

The use of design thinking, lean startup, and high-technology marketing in systems engineering are presented as a case study. All were used and evaluated for their potential to improve systems engineering processes and design, address the challenges of culture change, increase the adoption rate of new technology, and engage with potential users and sponsors more effectively. Multiple examples of training and use on a model-based systems engineering initiative at a large government agency showcase how these approaches were tailored and used successfully for significant benefits such as enhanced collaboration and better problem definition and design solutions. Challenges remain for use by quiet thinkers and with virtual teams. These new ways of thinking are well aligned with creating and using new technologies and are suitable for situations involving innovation, uncertainty, and change within organizations. This case study intends to familiarize systems engineers with the application of these human-centered approaches, to interest systems engineers in incorporating these approaches into their work processes ,and to inspire the systems engineering research community to investigate further.

Karen J. Weiland↗

A guide to the design of the virtual element methods for second- and fourth-order partial differential equations

Here we discuss the design and implementation details of two conforming virtual element methods for the numerical approximation of two partial differential equations that emerge in phase-field modeling of fracture propagation in elastic material. The two partial differential equations are: (i) a linear hyperbolic equation describing the momentum balance and (ii) a fourth-order elliptic equation modeling the damage of the material. Inspired by, we develop a new conforming VEM for the discretization of the two equations, which is implementation-friendly, i.e., different terms can be implemented by exploiting a single projection operator. We use C 0 and C 1 virtual elements for the second-and fourth-order partial differential equation, respectively. For both equations, we review the formulation of the virtual element approximation and discuss the details pertaining the implementation.

42 ENGINEERING↗

The Hardware of Smaller Clusters

Chris Saunders and three technologists are in high demand from Sandia's deep learning teams, and they're kept busy by building new clusters of computer nodes for researchers who need the power of supercomputing on a smaller scale. Sandia researchers working on Laboratory Directed Research & Development (LDRD) projects, or innovative ideas for solutions on short timeframes, formulate new ideas on old themes and frequently rely on smaller cluster machines to help solve problems before introducing their code to larger HPC resources. These research teams need an agile hardware and software environment where nascent ideas can be tested and cultivated on a smaller scale. Saunders and his team at Sandia's Science and Engineering Computing Environments are successfully enabling this research by creating pipelines for emerging code—from Cloud, to containers, to virtual machines—that build the right environment quickly to help teams solve their problems in a matter of days rather than months. While the larger HPC sources are available, it's these smaller clusters that can rapidly build a foundation for teams to build on for later development on larger systems.

97 MATHEMATICS AND COMPUTING↗

Revolutionary Propulsion Systems for 21st Century Aviation

The air transportation for the new millennium will require revolutionary solutions to meeting public demand for improving safety, reliability, environmental compatibility, and affordability. NASA's vision for 21st Century Aircraft is to develop propulsion systems that are intelligent, virtually inaudible (outside the airport boundaries), and have near zero harmful emissions (CO2 and Knox). This vision includes intelligent engines that will be capable of adapting to changing internal and external conditions to optimally accomplish the mission with minimal human intervention. The distributed vectored propulsion will replace two to four wing mounted or fuselage mounted engines by a large number of small, mini, or micro engines, and the electric drive propulsion based on fuel cell power will generate electric power, which in turn will drive propulsors to produce the desired thrust. Such a system will completely eliminate the harmful emissions. This paper reviews future propulsion and power concepts that are currently under development at NASA Glenn Research Center.

Sehra, Arun K.↗

Selected Papers and Presentations Presented at MODSIM World 2010 Conference Expo

MODSIM World 2010 was held in Hampton, Virginia, October 13-15, 2010. The theme of the 2010 conference & expo was "21st Century Decision-Making: The Art of Modeling& Simulation". The conference program consisted of seven technical tracks - Defense, Engineering and Science, Health & Medicine, Homeland Security & First Responders, The Human Dimension, K-20 STEM Education, and Serious Games & Virtual Worlds. Selected papers and presentations from MODSIM World 2010 Conference & Expo are contained in this NASA Conference Publication (CP). Section 8.0 of this CP contains papers from MODSIM World 2009 Conference & Expo that were unavailable at the time of publication of NASA/CP-2010-216205 Selected Papers Presented at MODSIM World 2009 Conference and Expo, March 2010.

Pinelli, Thomas E.↗

Selected Papers and Presentations Presented at MODSIM World 2010 Conference and Expo

MODSIM World 2010 was held in Hampton, Virginia, October 13-15, 2010. The theme of the 2010 conference & expo was "21st Century Decision-Making: The Art of Modeling& Simulation". The conference program consisted of seven technical tracks - Defense, Engineering and Science, Health & Medicine, Homeland Security & First Responders, The Human Dimension, K-20 STEM Education, and Serious Games & Virtual Worlds. Selected papers and presentations from MODSIM World 2010 Conference & Expo are contained in this NASA Conference Publication (CP). Section 8.0 of this CP contains papers from MODSIM World 2009 Conference & Expo that were unavailable at the time of publication of NASA/CP-2010-216205 Selected Papers Presented at MODSIM World 2009 Conference and Expo, March 2010.

Pinelli, Thomas E.↗

Analysis of the Value Added When Deploying a Model-Based Approach for the Validation and Verification of the Medical Database Software

The Medical Database (MD) is a virtual repository consisting of two software components: Medical Item Database (MedID) and the Evidence Library (EL). MedID consists of engineering data and associated information for specific medical resource items (e.g., pharmaceutical, medical devices, and supporting components), while the EL is a tool which provides all of the medical evidence necessary. The MD will 1) serve as the single “source of truth” for the Informing Mission Planning via Analysis of Complex Tradespaces (IMPACT) tool suite for both medical evidence and medical resource engineering data and 2) will be used in conjunction with the IMPACT tool suite to inform research prioritizations and perform systematic trade study evaluations to aid stakeholders in making informed decisions regarding simulated human spaceflight missions. The MD project used a Model-Based Systems Engineering (MBSE) approach to support all life cycles of the software development, while in parallel the human factors engineering team used modeling to support Human Centered Design (HCD) strategies in an effort to improve software usability. HCD is a frequently used approach in design frameworks that develops resolutions to complexities and challenges by involving the human perspective in all steps of the problem-solving process. By integrating the model-based approaches used for systems engineering and human factors activities, the project is able to leverage the model-based artifacts originally created for HCD activities for system level and human factors validation. In this presentation, our team highlights the value added when leveraging these model-based artifacts to support the on-going verification and validation activities.

C. Laing↗

Arbitrary Order Virtual Element Methods for High‐Order Phase‐Field Modeling of Dynamic Fracture

ABSTRACT Accurate modeling of fracture nucleation and propagation in brittle and ductile materials subjected to dynamic loading is important in predicting material damage and failure under extreme conditions. Phase‐field fracture models have garnered a lot of attention in recent years due to their success in representing damage and fracture processes in a wide class of materials and under a variety of loading conditions. Second‐order phase‐field fracture models are by far the most popular among researchers (and increasingly, among practitioners), but fourth‐order models have started to gain broader acceptance since their more recent introduction. The exact solution corresponding to these high‐order phase‐field fracture models has higher regularity. Thus, numerical solutions of the model equations can achieve improved accuracy and higher spatial convergence rates. In this work, we develop a virtual element framework for the high‐order phase‐field model of dynamic fracture. The virtual element method (VEM) can be regarded as a generalization of the classical finite element method. In addition to many other desirable characteristics, the VEM allows computing on polytopal meshes. Here, we use ‐conforming virtual elements and the generalized‐ time integration method for the momentum balance equation, and adopt ‐conforming virtual elements for the high‐order phase‐field equation. We verify our virtual element framework using classical quasi‐static benchmark problems and demonstrate its capabilities with the aid of numerical simulations of dynamic fracture in brittle materials.

42 ENGINEERING↗