Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “value stacking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

The Gas Distribution in Galaxy Cluster Outer Regions

Aims. We present the analysis of a local (z = 0.04 - 0.2) sample of 31 galaxy clusters with the aim of measuring the density of the X-ray emitting gas in cluster outskirts. We compare our results with numerical simulations to set constraints on the azimuthal symmetry and gas clumping in the outer regions of galaxy clusters. Methods. We exploit the large field-of-view and low instrumental background of ROSAT/PSPC to trace the density of the intracluster gas out to the virial radius. We perform a stacking of the density profiles to detect a signal beyond r200 and measure the typical density and scatter in cluster outskirts. We also compute the azimuthal scatter of the profiles with respect to the mean value to look for deviations from spherical symmetry. Finally, we compare our average density and scatter profiles with the results of numerical simulations. Results. As opposed to some recent Suzaku results, and confirming previous evidence from ROSAT and Chandra, we observe a steepening of the density profiles beyond approximately r(sub 500). Comparing our density profiles with simulations, we find that non-radiative runs predict too steep density profiles, whereas runs including additional physics and/or treating gas clumping are in better agreement with the observed gas distribution. We report for the first time the high-confidence detection of a systematic difference between cool-core and non-cool core clusters beyond 0.3r(sub 200), which we explain by a different distribution of the gas in the two classes. Beyond r(sub 500), galaxy clusters deviate significantly from spherical symmetry, with only little differences between relaxed and disturbed systems. We find good agreement between the observed and predicted scatter profiles, but only when the 1% densest clumps are filtered out in the simulations. Conclusions. Comparing our results with numerical simulations, we find that non-radiative simulations fail to reproduce the gas distribution, even well outside cluster cores. Although their general behavior is in better agreement with the observations, simulations including cooling and star formation convert a large amount of gas into stars, which results in a low gas fraction with respect to the observations. Consequently, a detailed treatment of gas cooling, star formation, AGN feedback, and taking into account gas clumping is required to construct realistic models of cluster outer regions.

Eckert, D.↗

Results of Self-Absorption Study on the Versapor 3000 Filters for Radioactive Particulate Air Sampling

Since the mid-1980s, Pacific Northwest National Laboratory (PNNL) has used a value of 0.85 as the correction factor for self absorption of activity for particulate radioactive air samples collected from building exhaust for environmental monitoring. This value accounts for activity that cannot be detected by direct counting of alpha and beta particles. Emissions can be degraded or blocked by filter fibers for particles buried in the filter material or by inactive dust particles collected with the radioactive particles. These filters are used for monitoring air emissions from PNNL stacks for radioactive particles. This paper describes an effort to re-evaluate self-absorption effects in particulate radioactive air sample filters (Versapor® 3000, 47 mm diameter) used at PNNL. There were two methods used to characterize the samples. Sixty samples were selected from the archive for acid digestion to compare the radioactivity measured by direct gas-flow proportional counting of filters to the results obtained after acid digestion of the filter and counting again by gas-flow proportional detection. Thirty different sample filters were selected for visible light microscopy to evaluate filter loading and particulate characteristics. Mass-loading effects were also considered. Filter ratios were calculated by dividing the initial counts by the post-digestion counts with the expectation that post-digestion counts would be higher because digestion would expose radioactivity embedded in the filter in addition to that on top of the filter. Contrary to expectations, the post digestion readings were almost always lower than initial readings and averaged approximately half the initial readings for both alpha and beta activity. Before and after digestion readings appeared to be related to each other, but with a low coefficient of determination (R^2) value. The ratios had a wide range of values indicating that this method did not provide sufficient precision to quantify self-absorption effects. The microscopy analysis compares different filter loadings and shows that smaller particle sizes (under 10 micron) can readily be seen on the more lightly loaded filters. At higher loadings, however, the particle size is harder to differentiate. This study provides data on actual stack emission samples showing a range of mass loading conditions and visual evidence of particle size and distribution and also presents the difficulties in quantifying self-absorption effects using actual samples.

air sampling↗

Enhanced Light Outcoupling from OLEDs Fabricated on Novel Low-Cost Patterned Plastic Substrates of Varying Periodicity

OLEDs continue to make strides in display applications, but their commercial utilization in solid-state lighting (SSL) is lagging. An ongoing challenge, in particular for manufacturing, is the need for enhanced efficiency and hence the necessity to increase in an inexpensive approach the extraction of the light generated inside the OLED into the forward (viewing) hemisphere. In conventional OLEDs fabricated on a transparent flat anode coated on glass, the external quantum efficiency (EQE) is only ~20%. About 50% of the light is lost to internal waveguiding in the high refractive index (RI) organic + ITO anode layers and to surface plasmon polaritons (SPPs) at the organic/metal cathode interface. Another ~30% of the light is externally waveguided in the substrate to its edges. While extraction of the externally waveguided light is commonly addressed by adding a microlens array (MLA) or a scattering layer at the substrate’s air-side, light outcoupling increases by only ~1.6-1.7x (vs up to 2.5x in improving from ~20% to ~50%). The use of a hemispherical lens or an index matching fluid (IMF) at the substrate/photodetector (PD) interface increases the outcoupling by at least 2x; these approaches however, are not viable industrially, and even a MLA is sometimes undesirable due to its non-planar, scattering structure. In multi-stack tandem OLEDs, where the metal cathode is far from the emitting zone(s), the impact of photons loss to SPPs decreases. Our project addressed the ~50% loss to the internally waveguided light and SPPs. We evaluated OLEDs fabricated on patterned or planarized plastic substrates manufactured in a cost-effective approach compatible with a roll-to-roll (R2R) process. The OLEDs were either (i) patterned to various degrees depending on the pitch a and height or depth h of the pattern features or (ii) planar, with a pattern buried under a flat high RI planarization layer. We demonstrated that the outcoupling from green patterned OLEDs reaches ~50% by mitigating plasmon–related loss and internal waveguiding, even without the addition of a MLA, a hemispherical lens, or IMF. Simulations conducted in parallel with the experimental effort demonstrated how diffraction by conformally corrugated OLEDs increases the outcoupling to >60%. Structures with varying pitch values were also simulated indicating that combining domains of varying pitch could increase outcoupling to 55-60%. Experimentally, we additionally assessed the role a and h in determining not only the OLED efficiencies, but also their structural properties, i.e., the uniformity and conformality throughout the OLED stack. As planar OLEDs are preferred over corrugated devices, we studied different patterns in plastic substrates that were planarized by a high RI formulation. Planar green OLEDs on such structures showed enhanced efficiencies with EQEs larger than 60% with the addition of an IMF (to extract the substrate mode) at the substrate/Si PD interface. White OLEDs showed EQEs of 45.5%. Plastic substrates are currently less attractive than glass substrates due to drawbacks such as permeability to water vapor and oxygen, and in some cases thermal instability. Plastic substrates however, are flexible and easy to handle unlike thin flexible glass, and once transparent thin barrier films are available, they will become more attractive; they are already of interest in medical applications. Importantly, as it is easy to generate various patterns in different plastic materials, they provide excellent means for assessing and optimizing enhancing extracting structures. Such structures can also be transferred to glass substrates with some process modifications. The technical effectiveness and economic feasibility of the project lie in the patterning of the extracting plastic substrates in an approach that is scalable to R2R manufacturing. R2R processes are of drastically lower-cost than batch or single-unit fabrication. The patterned plastic can be a part of an integrated substrate either plastic or glass, which includes also a MLA or a planar layer with embedded scattering particles, as well as a conductive metal mesh/electrode design. SSL is environmentally-friendly and as OLED SSL becomes more efficient it will reduce electricity consumption, and hence lighting cost, as well as produce less expensive attractive lighting fixtures. Our university-industry collaboration is hence of major benefit to the public as it demonstrates the feasibility of manufacturing optimized extracting substrates for highly efficient OLEDs for SSL in a future R2R process, which would drastically reduce the manufacturing cost and increase production in the USA. Moreover, newly developed methods by our team allow low-cost roll manufactured substrates to be transferred to flexible or rigid glass substrates, which solves the plastic substrate barrier issues, and when combined with device encapsulation will increase the OLEDs’ environmental stability.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Theoretical and experimental quantification of Suzuki segregation enthalpy and strengthening mechanisms in a binary alloy

Solute segregation to planar defects in metallic alloys has been shown to drastically alter mechanical properties. While various works using first-principles and thermodynamic calculations have studied the fundamental driving forces for solute segregation via the Suzuki criterion, planar defect energy, or a comparison of energies of the HCP-like phase and FCC matrix, a quantitative experimental and computational comparison of equilibrium composition and segregation enthalpies has not yet been reported. In this work, we predict the equilibrium composition and segregation enthalpy to intrinsic stacking faults in a Ni-60Co (at.%) alloy and compare the results to two independent experimental methods. We observed that Co segregates to the innermost two planes of the intrinsic stacking fault, and we found that the experimental segregation enrichment, measured from transmission electron microscopy energy dispersive X-ray spectroscopy, of the faults is 6.8 at.% Co, which is 2.2 at.% less than the predicted value at the same temperature. We also find that the segregation enthalpy measured from the composition profile is −21.1 ± 6.4 meV/atom and separately from differential scanning calorimetry segregation enthalpy is −33.2 meV/atom, whereas the predicted enthalpy is −31 ± 1 meV/atom. Based on these results, we determine that segregation occurs very rapidly, within 8 min at temperatures as low as 36% of the homologous solidus temperature. Furthermore, this analysis provides an overview of the possible dislocation mechanisms responsible for strengthening effects due to solute segregation, and concludes that changes in room temperature hardness from local phase transformation is likely tied to post-segregation room temperature equilibrium partial separation distance.

Ab initio calculation↗

Theoretical analysis of sound transmission loss through graphene sheets

We examine the potential of using graphene sheets (GSs) as sound insulating materials that can be used for nano-devices because of their small size, super electronic, and mechanical properties. In this study, a theoretical analysis is proposed to predict the sound transmission loss through multi-layered GSs, which are formed by stacks of GS and bound together by van der Waals (vdW) forces between individual layers. The result shows that the resonant frequencies of the sound transmission loss occur in the multi-layered GSs and the values are very high. Based on the present analytical solution, we predict the acoustic insulation property for various layers of sheets under both normal incident wave and acoustic field of random incidence source. The scheme could be useful in vibration absorption application of nano devices and materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

THE EFFECTS OF PLASMA BETA AND ANISOTROPY INSTABILITIES ON THE DYNAMICS OF RECONNECTING MAGNETIC FIELDS IN THE HELIOSHEATH

The plasma {beta} (the ratio of the plasma pressure to the magnetic pressure) of a system can have a large effect on its dynamics as high {beta} enhances the effects of pressure anisotropies. We investigate the effects of {beta} in a system of stacked current sheets that break up into magnetic islands due to magnetic reconnection, which is analogous to the compressed heliospheric current sheet in the heliosheath. We find significant differences between systems with low and high initial values of {beta}. At low {beta}, growing magnetic islands are modestly elongated and become round as contraction releases magnetic stress and reduces magnetic energy. At high {beta}, the increase of the parallel pressure in contracting islands causes saturation of modestly elongated islands as island cores approach the marginal firehose condition. Only highly elongated islands reach finite size. The anisotropy within these islands prevents full contraction, leading to a final state of highly elongated islands in which further reconnection is suppressed. The elongation of islands at finite {beta} is further enhanced by reducing the electron-to-ion mass ratio to more realistic values. The results are directly relevant to reconnection in the sectored region of the heliosheath where there is evidence that elongated islands are present, and possibly to other high-{beta} systems such as astrophysical accretion flows and the magnetosphere of Saturn.

79 ASTRONOMY AND ASTROPHYSICS↗

Suzaku X-ray observations of the Fermi Bubbles: Northernmost cap and southeast claw discovered with maxi-SSC

We report on Suzaku observations of large-scale X-ray structures possibly related to the Fermi Bubbles obtained in 2013 with a total duration of ≃80 ks. The observed regions were (1) the northern cap (N-cap; l ∼ 0°, 45°<b< 55°) seen in the mid-band (1.7–4.0 keV) map recently provided by Monitor of All-sky X-ray Image Solid-state Slit Camera (MAXI-SSC) and (2) the southeast claw (SE-claw; l ∼ 10°, −20{sup ∘}<b<−10{sup ∘}) seen in the ROSAT all-sky map and MAXI-SSC low-band (0.7–1.7 keV) map. In each region, we detected diffuse X-ray emission, which is represented by a three-component plasma model consisting of an unabsorbed thermal component (kT ≃ 0.1 keV) from the Local Hot Bubble, absorbed kT = 0.30 ± 0.05 keV emission representing the Galactic halo (GH), and a power-law component due to the isotropic cosmic X-ray background radiation. The emission measure of the GH component in the SE-claw shows an excess by a factor of ≃2.5 over the surrounding emission at 2° away. We also found a broad excess in the 1.7–4.0 keV count rates across the N-cap after compiling other archival data from Suzaku and Swift. The spectral stacking analysis of the N-cap data indicates the presence of another thermal component with kT = 0.70{sub −0.11}{sup +0.22}keV. The temperature kT ≃ 0.3 keV of the GH is higher than the ubiquitous value of kT ≃ 0.2 keV near the Fermi bubbles, and can be even higher (∼0.7 keV). We discuss our findings in the context of the bubble–halo interaction.

79 ASTRONOMY AND ASTROPHYSICS↗

Membrane Thickness Impact on Chemical Degradation Rates

Abstract A comprehensive investigation of PFSA membrane chemical degradation rates as a function of thickness (8-20 µm) is reported. The two-pronged study was conducted on bare membranes and as components of chemically-mitigated and mechanically-reinforced, state-of-the-art (SOA) membrane electrode assemblies (MEAs). The bare membranes were subjected to H2O2 vapor test and MEAs were degraded under OCV conditions, both at 90°C. Both test types employed fluoride release rates (FRR) to monitor chemical degradation rates. Vapor tests revealed that area-specific degradation rates were positively correlated with membrane thickness, but thickness normalized degradation rates were independent of thickness. Open-circuit voltage (OCV) investigations spanning the membrane thickness series of MEAs was probed via a 27-experiment 3(4-1) fractional factorial experimental design. Statistical analysis of the FRR values revealed that chemical degradation rates were dominated by the relative humidity value and that the area-specific degradation rates of MEAs were independent of membrane thickness. The OCV chemical durability insensitivity to membrane thickness is supported by on-load membrane chemical durability studies at the stack level. The results suggest that ,despite smaller ionomer inventory, SOA thin membranes and MEAs are not greatly disadvantaged relative to thicker membranes from a chemical durability perspective, provided oxidative stress levels are controlled throughout application lifetime.

Coms, Frank D. (ORCID:0000000249160350)↗

Inversions for Deep Solar Meridional Flow Using Spherical Born Kernels

The solar meridional flow is a crucial ingredient in modern dynamo theory. Seismic estimates of this flow have, however, been contradictory in deeper layers below about 0.9 R{sub ⊙}. Results from time−distance helioseismology have so far been obtained using the ray approximation. Here, we perform inversions using the Born approximation. The initial result is similar to the result previously obtained by Jackiewicz et al. using ray kernels while using the same set of GONG data and the SOLA inversion technique. However, we show that the assumption of uncorrelated measurements used in earlier studies may lead to inversion errors being underestimated by a factor of about 2–4. In a second step, refined inversions are performed using the full covariance matrix and a regularization for cross-talk. As the results are found to depend on the threshold used in the singular value decomposition, they were obtained for a medium threshold (10{sup −7}--10{sup −5}, about 50% of the values used) and a threshold lower by a factor of 10 (about 70% of the values used). The result obtained with the medium threshold is again similar to the original, with less latitudinal variation. However, using the lower threshold, the inverted flow in the southern hemisphere shows two or three cells stacked radially depending on the associated radial flows. Both the single-cell and the multi-cell profiles are consistent with the measured travel times. All our results confirm a shallow return flow at about 0.9 R{sub ⊙}.

79 ASTRONOMY AND ASTROPHYSICS↗

High temperature selective emitters via critical coupling of weak absorbers

Tailoring the emission spectra of a solar thermophotovoltaic emitter away from that of a blackbody, thereby minimizing transmission and thermalization loss in the energy receiver, is a viable approach to circumventing the Shockley-Queisser limit to single junction solar energy conversion. Embodiments allow for radically tuned selective thermal emission that leverages the interplay between two resonant phenomena in a simple planar structure—absorption in weakly-absorbing thin films and reflection in multi-layer dielectric stacks. A virtual screening approach is employed based on Pareto optimality to identify a small number of promising structures for a selective thermal emitter from a search space of millions, several of which approach the ideal values of a step-function selective thermal emitter.

Martinson, Alex B.↗

Effect of pressure on elastic, mechanical and electronic properties of WSe{sub 2}: A first-principles study

Highlights: • B, E and v increase as pressure increases, except for a sudden decrease at 40 GPa. • WSe{sub 2} under pressure has larger shear modulus and higher hardness than WSe{sub 2} at 0 GPa. • WSe{sub 2} has an isostructural semiconductor-semimetal phase transition at 40 GPa. • The covalent bonding between Se and W atoms in the slabs is enhanced under pressure. • The distance of the stacked Se–W–Se slabs is decreased with the increasing pressure. - Abstract: Effect of pressure on elastic, mechanical and electronic properties of WSe{sub 2} has been investigated using the first-principles calculations. The calculated lattice parameters, band structure and elastic constants of WSe{sub 2} at 0 GPa are in good agreement with the available experimental and calculational values. With the increasing pressure, the lattice parameters and volume of WSe{sub 2} decrease whereas the total enthalpy increases. The bulk modulus, Young's modulus and Poisson's ratio of WSe{sub 2} increase with the increasing pressure, except for a sharp decrease at the pressure of 40 GPa. WSe{sub 2} under pressure has larger shear modulus and higher hardness than WSe{sub 2} at 0 GPa. With the increase of pressure, the covalent bonding between Se and W atoms in the slabs is enhanced whereas the distance of the stacked slabs is decreased. Additionally, an isostructural semiconductor-semimetal phase transition of WSe{sub 2} is found to take place at 40 GPa, which is consistent with the experimental observations.

36 MATERIALS SCIENCE↗

A stoichiometrically conserved homologous series with infinite structural diversity

Here, we describe a compositionally guided structural evolution within a stoichiometrically conserved framework, BaSbQ 3 (Q = Te 1−x S x ), where each value of x gives rise to a distinct phase. The fundamental building blocks, A 1 (BaSbSTe 2 ) and B n (Ba n Sb n S n−1 Te 2n+1 ), were composed of modular double rocksalt slabs stacked with functional polytelluride zigzag chains, with each phase differing only in the size and assembly of these blocks. Ten compounds were synthesized that maintained a coherent chemical identity that arose from this isovalent, isoelectronic substitution of Te and S. We envision that the phase formation at a molecular level unfolds in stages of extension, termination, and assembly and propose a design concept of “anionic disparity,” where phase homologies and polytelluride hierarchical networks can be controlled by leveraging differences in anion electron affinity and sizes.

Zhao, Hengdi [Argonne National Laboratory (ANL), A↗

Observational and Numerical Diagnostics of Galaxy Cluster Outer Regions

Aims. We present the analysis of a local (z = 0.04 - 0.2) sample of 31 galaxy clusters with the aim of measuring the density of the X-ray emitting gas in cluster outskirts. We compare our results with numerical simulations to set constraints on the azimuthal symmetry and gas clumping in the outer regions of galaxy clusters. Methods. We exploit the large field-of-view and low instrumental background of ROSAT/PSPC to trace the density of the intracluster gas out to the virial radius. We perform a stacking of the density profiles to detect a signal beyond r(sub 200) and measure the typical density and scatter in cluster outskirts. We also compute the azimuthal scatter of the profiles with respect to the mean value to look for deviations from spherical symmetry. Finally, we compare our average density and scatter profiles with the results of numerical simulations. Results. As opposed to several recent results, we observe a steepening of the density profiles beyond approximately 0.3r(sub 500). Comparing our density profiles with simulations, we find that non-radiative runs predict too steep density profiles, whereas runs including additional physics and/or gas clumping are in better agreement with the observed gas distribution. We note a systematic difference between cool-core and non-cool core clusters beyond approximately 0.3r(sub 200), which we explain by a different distribution of the gas in the two classes. Beyond approximately r(sub 500), galaxy clusters deviate significantly from spherical symmetry, with only little differences between relaxed and disturbed systems. We find good agreement between the observed and predicted scatter profiles, but only when the 1% densest clumps are filtered out in the simulations. Conclusions. The general trend of steepening density around the virial radius indicates that the shallow density profiles found in several recent works were probably obtained along particular directions (e.g., filaments) and are not representative of the typical behavior of clusters. Comparing our results with numerical simulations, we find that non-radiative simulations fail to reproduce the gas distribution, even well outside cluster cores. Therefore, a detailed treatment of gas cooling, star formation, clumping, and AGN feedback is required to construct realistic models of cluster outer regions.

Eckert, D.↗

Predicting EBC Temperature Limits for Industrial Gas Turbines

Higher turbine inlet temperatures may require the use of ceramic matrix composites (CMC) such as SiC/SIC, which require environmental barrier coatings (EBCs) to protect them against the detrimental effect of water vapor. Here, the goal of this project is to determine the maximum bond coating temperature for EBCs for land-based turbines, where the minimum coating lifetime is 25,000 h. If the temperature exceeds the 1414°C melting point of the Si bond coating, then coatings without a bond coating also need to be evaluated. Thus, current Yb 2 Si 2 O 7 EBCs with a Si bond coating and next-generation EBCs without a Si bond coating are being evaluated in laboratory testing using 1-h cycles in air+90%H 2 O. For this initial work, coatings were deposited on CVD SiC coupons. Reaction kinetics at 1250°, 1300° and 1350°C have been evaluated by measuring the thickness of the thermally grown silica scale after 100–500 h exposures. For comparison, scale growth rates for uncoated SiC and Si specimens in dry and wet environments were included as minimum and maximum values, respectively. Based on a critical scale thickness failure criteria, estimated maximum temperatures were calculated for both EBC systems using this initial data.

42 ENGINEERING↗

Granular nanostructures and magnetic characteristics of FePt-TiO{sub 2}/FePt-C stacked granular films

To realize a granular film composed of L1{sub 0}-FePt grains with high uniaxial magnetic anisotropy energy, K{sub u}, and segregants for heat-assisted magnetic recording, the FePt-TiO{sub 2}/FePt-C stacked film was investigated. The FePt-TiO{sub 2}/FePt-C stacked film has well-isolated granular structure with average grain size of 6.7 nm because the FePt-TiO{sub 2} film follows the FePt-C template film in microstructural growth. However, the K{sub u} value is quite low for total thickness of 9 nm: 5 × 10{sup 6} erg/cm{sup 3}. Exploration of the thickness dependence of L1{sub 0}-FePt(001) peaks in XRD spectra and cross-sectional TEM images suggest that degradation of the L1{sub 0} ordering appears near the middle of the FePt-TiO{sub 2} layer. The EDX-STEM mapping reveals that Ti atoms exist within the FePt grains in addition to the grain boundary. This indicates the possibility that TiO{sub 2} tends to be incorporated into the FePt grains and that it prevents L1{sub 0}-ordering of the FePt grains along the normal-to-plane direction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Composite Nafion 117-TMSP membrane for Fe-Cr redox flow battery applications

The modification of Nafion 117 - TMSP (trimethoxysylilprophanthiol) composite membrane has been conducted by in-situ sol-gel method followed by characterization of structural and properties of material using spectroscopic techniques. The performance of composite membrane has then been examined in the single stack module of Fe-Cr Redox Flow Battery. It was found that the introduction of silica from TMSP through sol-gel process within the Nafion 117 membrane produced composite membrane that has slightly higher proton conductivity values as compared to the pristine of Nafion 117 membrane observed by electrochemical impedance spectroscopy. The degree of swelling of water in the composite membrane demonstrated greatly reduced than a pristine Nafion 117 signifying low water cross over. The SEM-EDX measurements indicated that there was no phase separation occurred suggesting that silica nanoparticles are distributed homogeneously within the composite membrane. The composite membrane used as separator in the system of Fe-Cr Redox Flow Battery revealed no cross mixing (crossover) occurred between anolyte and catholyte in the system as observed from the total voltage measurements that closed to the theoretical value. The battery efficiency generally increased as the volume of the electrolytes enlarged.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Artificial intelligence-empowered cellular morphometric risk score improves prognostic stratification of cutaneous squamous cell carcinoma

Abstract Background Risk stratification of cutaneous squamous cell carcinoma (cSCC) is essential for managing patients. Objectives To determine if artificial intelligence and machine learning might help to stratify patients with cSCC by risk using more than solely clinical and histopathological factors. Methods We retrieved a retrospective cohort of 104 patients whose cSCCs had been excised with clear margins. Clinical and histopathological risk factors were evaluated. Haematoxylin and eosin-stained slides were scanned and analysed by an algorithm based on the stacked predictive sparse decomposition technique. Cellular morphometric biomarkers (CMBs) were identified via machine learning and used to derive a cellular morphometric risk score (CMRS) that classified cSCCs into clusters of differential prognoses. Concordance analysis, sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV) and accuracy were calculated and compared with results obtained with the Brigham and Women’s Hospital (BWH) staging system. The performance of the combination of the BWH staging system and the CMBs was also analysed. Results There were no differences among the CMRS groups in terms of clinical and histopathological risk factors and T-stage assignment, but there were significant differences in prognosis. Combining the CMRS with BWH staging systems increased distinctiveness and improved prognostic performance. C-indices were 0.91 local recurrence and 0.91 for nodal metastasis when combining the two approaches. The NPV was 94.41% and 96.00%, the PPV was 36.36% and 41.67%, and accuracy reached 86.75% and 89.16%, respectively, with the combined approach. Conclusions CMRS is helpful for cSCC risk stratification beyond classic clinical and histopathological risk features. Combining the information from the CMRS and the BWH staging system offers outstanding prognostic performance for patients with high-risk cSCC.

Pérez-Baena, Manuel J.↗

Temperature-Dependent Mechanical Properties of Ni-Based Concentrated Alloys: Insights from First-Principles Calculations

The present work focuses on predicting temperature-dependent mechanical properties of Ni-based concentrated alloys Ni 18 Cr 10 Co 10 Fe 6 M 4 (abbreviated by X 44 M 4 , with M = Al, V, Mn, Fe, Nb, Mo, and W) using density functional theory (DFT). These predictions are based on shear (plastic) and elastic deformations, utilizing the special quasirandom structure (SQS), the phonon-based quasiharmonic approach (QHA), and the quasistatic approach. The resulting properties include coefficient of thermal expansion via QHA, ideal shear strength (τ IS ), and stable and unstable stacking fault energies (γ SF and γ US ) through pure alias shear deformation, and elastic constants (c ij ), bulk modulus (B 0 ), and shear modules (G 0 ) via elastic deformation. Notably, predicting accurate γ SF is challenging due to uncertainties that can exceed the γ SF values. τ IS and γ US exhibit a strong linear relationship, enabling the accurate prediction of γ US based on the precisely determined τ IS . All mechanical properties of X 44 M 4 decrease with increasing temperature, except for some γ SF cases such as X 44 M 4 with M = V, Mn, Fe, Mo, and W. Among the X 44 M 4 alloys, X 44 Nb 4 exhibits the lowest τ IS , γ US , and G 0 values, and the highest B 0 /G 0 ratio, while X 44 Mn 4 has the lowest B 0 and B 0 /G 0 ratio. We found that volume is a crucial descriptor for understanding and modeling mechanical properties (except B0 and maybe also γ SF ) affected by alloying elements and temperature. Ni-based dilute alloys (e.g., Ni 11 M 1 and Ni 31 M 1 ) and concentrated alloys (e.g., X 44 M 4 ) show similar trends in mechanical properties influenced by alloying elements and temperature, simplifying the analysis and design of Ni-based alloys.

Elastic properties↗