Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “two step target”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Brachypodium SPEECHLESS2 Promoter Drives Expression of a Synthetic EPF to Reduce Stomatal Density in Sugarcane Without Pleiotropic Effects

Stomata are microscopic pores that regulate the exchange of CO 2 and water vapour, making them a major target for engineering plants with improved intrinsic water use efficiency (iWUE). Proof-of-concept studies have demonstrated the potential to increase iWUE by reducing stomatal density (SD) and stomatal conductance (g sw ) by ubiquitously expressing EPIDERMAL PATTERNING FACTOR (EPF) family genes. However, unwanted effects on leaf, stem and reproductive traits are often observed when EPFs are misexpressed in this fashion. We sought to test if these effects result from pleiotropy and to identify a targeted promoter that can circumvent the side effects while retaining the desired reduction in SD. A previously reported synthetic EPF (EPF syn ) was expressed in sugarcane ( Saccharum spp.) using two putatively tissue-specific promoters from Brachypodium distachyon (BdCESA7p and BdSPCH2p) and a ubiquitous control from Zea mays (ZmUBI4p). BdSPCH2p control reduced SD to statistically equivalent levels as ZmUBI4p on the abaxial (23%) and adaxial (23%) leaf surfaces. ZmUB4p and BdCESA7p induce expression in four tissue types often associated with pleiotropic effects in EPF-expressing low SD plants. Transgenic plants carrying either the BdCESA7p or ZmUBI4p EPF syn cassettes displayed leaf chlorosis, reduced leaf nitrogen and chlorophyll content, and altered stem architecture. However, transgenic events harboring the BdSPCH2p EPF syn cassette restricted EPF syn expression to the stomatal development zone and leaf nodal tissues and produced transgenic plants without the associated pleiotropic effects. These results represent an important step toward engineering low-SD crops since they show that targeted gene expression can engineer stomatal patterning without impairing agronomically important traits.

59 BASIC BIOLOGICAL SCIENCES↗

Installation protocol for charge transfer dissociation mass spectrometry on ion trapping mass spectrometers

Abstract Rationale Charge transfer dissociation (CTD) is a novel fragmentation technique that demonstrates enhanced structural characterization for a wide variety of molecules compared to standard fragmentation techniques like collision‐induced dissociation (CID). Alternative fragmentation techniques, such as electron transfer dissociation, electron capture dissociation, and ultraviolet photodissociation, also overcome many of the shortfalls of CID, but none of them are a silver bullet that can adequately characterize a wide variety of structures and charge states of target compounds. Given the diversity of structural classes and their occasional obstinance towards certain activation techniques, alternative fragmentation techniques are required that rely on novel or alternative modes of activation. Methods Herein, we present a step‐by‐step protocol for the installation of CTD on a quadrupole ion trap mass spectrometer and best practices for optimizing the signal‐to‐noise ratio and acquisition times for CTD mass spectra. Results In addition to two CTD installations in the Jackson laboratory, CTD has also been installed, and is currently in operation, on two 3D ion trap mass spectrometers in France: one in the laboratory of Dr. David Ropartz and Dr. Hélène Rogneaux at INRAE in Nantes, and the other in the laboratory of Dr. Jean‐Yves Salpin at Université d'Évry Val‐d'Essonne, part of the Paris‐Saclay University system. Conclusions Here, we provide a visual protocol to help others accomplish the instrument modification.

47 OTHER INSTRUMENTATION↗

Design of a Solar Reactor to Split CO2 Via Isothermal Redox Cycling of Ceria

The design procedure for a 3 kWth prototype solar thermochemical reactor to implement isothermal redox cycling of ceria for CO2 splitting is presented. The reactor uses beds of mm-sized porous ceria particles contained in the annulus of concentric alumina tube assemblies that line the cylindrical wall of a solar cavity receiver. The porous particle beds provide high surface area for the heterogeneous reactions, rapid heat and mass transfer, and low pressure drop. Redox cycling is accomplished by alternating flows of inert sweep gas and CO2 through the bed. The gas flow rates and cycle step durations are selected by scaling the results from small-scale experiments. Thermal and thermo-mechanical models of the reactor and reactive element tubes are developed to predict the steady-state temperature and stress distributions for nominal operating conditions. The simulation results indicate that the target temperature of 1773K will be reached in the prototype reactor and that the Mohr-Coulomb static factor of safety is above two everywhere in the tubes, indicating that thermo-mechanical stresses in the tubes remain acceptably low.

Bader, R↗

Process Development and Micro-Machining of MARBLE Foam-Cored Rexolite Hemi-Shell Ablator Capsules

For this study, machined CH hemi-shell ablator capsules have been successfully produced by the MST-7 Target Fabrication Team at Los Alamos National Laboratory. Process development and micro-machining techniques have been developed to produce capsules for both the Omega and National Ignition Facility (NIF) campaigns. These capsules are gas filled up to 10 atm and consist of a machined plastic hemi-shell outer layer that accommodates various specially engineered low-density polystyrene foam cores. Machining and assembly of the two-part, step-jointed plastic hemi-shell outer layer required development of new techniques, processes, and tooling while still meeting very aggressive shot schedules for both campaigns. Finally, problems encountered and process improvements will be discussed that describe this very unique, complex capsule design approach through the first Omega proof-of-concept version to the larger NIF version.

42 ENGINEERING↗

Layer by Layer Photo-Cross-Linked Environmental Functional hydrogel Thin Films Based on Vanillin: Part 3

The present work emphasizes the preparation of new monomer from the family of vanillin acrylate. It has been prepared in two steps the name of the final product is [2-((ditert-butylamino) methyl)-4-formyl-6-methoxyphenyl acrylate] and abbreviated by TBAMVA, both products were evaluated by {sup 1}H, {sup 13}C NMR and FTIR and they were in the logic case with the chemical structure. The next step was the preparation of three different pH and temperature responsive copolymers by free radical polymerization of 5, 10, 20 mol% of TBAMVA and 5 mol% of maleimide photo-cross-linker with N-isopropylacrylamide. Polymers were chemically and physically characterized indicating the presence of the aldehyde group in the main chain. The lower critical solution temperature of polymers has been determined by two methods; the first one using turbidity measurements by UV–Vis Spectroscopy, another method using micro-DSC. The last step was the formation of pH-Temperature responsive hydrogel layer over gold and studying the swelling properties response to pH and temperature using surface plasmon resonance with the optical waveguide. In the present work, we focused on synthesizing new environmental functional polymers and hydrogel thin films used as biosensor as a target for many biological molecules in biosynthesis, drug delivery, and bio-separation.

36 MATERIALS SCIENCE↗

Improved titanium-44 purification process for establishing a high apparent molar activity titanium-44/scandium-44 generator

44 Sc-radiopharmaceuticals are gaining more interest but still lack availability. The proof of principle of a 44 Ti/ 44 Sc generator, which can produce 44 Sc daily, has been established but with some limitations and drawbacks. Despite recent advances, separation of 44 Ti from massive quantities of scandium target material is still cumbersome. Here, in this work, the improved radiochemical separation of 44 Ti from residual scandium target material was carried out by precipitation of Sc with fluoride ions. Furthermore, two approaches were used to set up a high apparent molar activity small-scale generator. The first method relied on extraction chromatography for fine purification using a DGA resin, followed by loading of the purified 44 Ti onto a ZR resin column. In the second method, 44 Ti was loaded on the ZR resin directly after the precipitation step. This second method was used to set up a generator of 370 kBq and evaluate by radiolabeling. An apparent molar activity of 2 MBq/nmol was obtained for the radiolabeling with DOTA, the most common and suitable chelate for scandium. This result is comparable with previously published data on 44m/44 Sc.

44Sc↗

Structural evidence for substrate-induced synergism and half-sites reactivity in biotin carboxylase

Bacterial acetyl-CoA carboxylase is a multifunctional biotin-dependent enzyme that consists of three separate proteins: biotin carboxylase (BC), biotin carboxyl carrier protein (BCCP), and carboxyltransferase (CT). Acetyl-CoA carboxylase is a potentially attractive target for novel antibiotics because it catalyzes the first committed step in fatty acid biosynthesis. In the first half-reaction, BC catalyzes the ATP-dependent carboxylation of BCCP. In the second half-reaction, the carboxyl group is transferred from carboxybiotinylated BCCP to acetyl-CoA to produce malonyl-CoA. A series of structures of BC from several bacteria crystallized in the presence of various ATP analogs is described that addresses three major questions concerning the catalytic mechanism. The structure of BC bound to AMPPNP and the two catalytically essential magnesium ions resolves inconsistencies between the kinetics of active-site BC mutants and previously reported BC structures. Another structure of AMPPNP bound to BC shows the polyphosphate chain folded back on itself, and not in the correct (i.e., extended) conformation for catalysis. This provides the first structural evidence for the hypothesis of substrate-induced synergism, which posits that ATP binds nonproductively to BC in the absence of biotin. The BC homodimer has been proposed to exhibit half-sites reactivity where the active sites alternate or 'flip-flop' their catalytic cycles. A crystal structure of BC showed the ATP analog AMPPCF{sub 2}P bound to one subunit while the other subunit was unliganded. The liganded subunit was in the closed or catalytic conformation while the unliganded subunit was in the open conformation. This provides the first structural evidence for half-sites reactivity in BC.

59 BASIC BIOLOGICAL SCIENCES↗

Exploring structure-function relationships governing transport by and regulation of the major cyanobacterial bicarbonate transporters SbtA and BicA

Cyanobacteria play a large and essential role in the global carbon cycle, while also representing promising microbial platforms for the direct bioproduction of fuels and chemicals from solar energy and carbon dioxide (CO 2 ). In both cases, a critical step in the overall photosynthetic process is the transport of inorganic carbon (Ci) across the cell membrane, which occurs via different mechanisms and associated transporter proteins that target either CO 2 or bicarbonate (HCO 3 - ). In the latter case, BicA (constitutively-expressed, high-flux/low-affinity Na + /HCO 3 - symporter) and SbtA (low-flux/high-affinity Na + /HCO 3 - symporter, expressed only under low CO 2 conditions) have been identified as the two main cyanobacterial HCO 3 - transporters. This project entailed combining detailed functional and high-resolution structural studies to help fill key knowledge gaps regarding the mechanisms of HCO 3 - transport by BicA and SbtA. Specifically, major goals of this project included: i) identifying key residues and structural features of BicA and SbtA that are responsible for modulating their uptake flux and affinity behaviors, and ii) obtaining high-resolution structures of full-length BicA and SbtA.

59 BASIC BIOLOGICAL SCIENCES↗

Alchemy: A Model-Based Approach for 2D to 3D Autonomous Nuclear System Design

Engineering design of nuclear power plant (NPP) piping and equipment systems frequently bypasses crucial 2D system planning, instead moving straight to 3D modeling. This often leads to designs that exceed building envelope constraints, forcing expensive and time-consuming redesigns. When 2D modeling is employed, it typically involves labor-intensive manual workflows that convert 2D drawings into 3D models, resulting in inefficiencies and errors across design iterations. These workflows further suffer from poor software interoperability and dependence on proprietary software ecosystems, thereby contributing to schedule delays and cost overruns. This paper presents Alchemy, an autonomous framework that transforms 2D system definitions into Industry Foundation Classes (IFC)-compliant 3D building information models (BIMs) for expediting nuclear facility design at the conceptual preliminary phase. Using a model-based approach, the framework treats the 2D system diagram as the central reference model employed to automatically generate all subsequent outputs, ensuring consistency between the system definition and the resulting physical design. A web-based interface enables engineers to define hierarchical system topologies including associated equipment, geometric properties, and connectivity requirements. A two-phase equipment layout optimization algorithm automatically computes collision-free spatial configurations within predefined building envelopes. An artificial intelligence (AI)-assisted pipe routing module then generates orthogonal, collision-free routing paths, allowing the user to select either an A* search-based method or an Ant Colony Optimization (ACO)-based method. All outputs are authored natively in IFC format, relying on open-source technologies and standardized formats in order to ensure extensibility and eliminate proprietary software dependencies. The proposed framework is validated on two representative pressurized-water reactor (PWR)-based case studies, for which it autonomously generates IFC-compliant 3D models in minutes, drastically reducing workflows that typically require hours of manual effort. The generated model demonstrates topologically correct equipment placement, physically plausible spatial relationships, and collision-free pipe routing consistent with known PWR loop configurations. This work represents a foundational step toward digital engineering for nuclear facility preliminary design, with future ongoing development targeting design code compliance and expanded system complexity.

97 - MATHEMATICS AND COMPUTING↗

Kinetic and structural characterization of caspase-3 and caspase-8 inhibition by a novel class of irreversible inhibitors

Because of their central role in programmed cell death, the caspases are attractive targets for developing new therapeutics against cancer and autoimmunity, myocardial infarction and ischemic damage, and neurodegenerative diseases. We chose to target caspase-3, an executioner caspase, and caspase-8, an initiator caspase, based on the vast amount of information linking their functions to diseases. Through a structure-based drug design approach, a number of novel {beta}-strand peptidomimetic compounds were synthesized. Kinetic studies of caspase-3 and caspase-8 inhibition were carried out with these urazole ring-containing irreversible peptidomimetics and a known irreversible caspase inhibitor, Z-VAD-fmk. Using a stopped-flow fluorescence assay, we were able to determine individual kinetic parameters of caspase-3 and caspase-8 inhibition by these inhibitors. Z-VAD-fmk and the peptidomimetic inhibitors inhibit caspase-3 and caspase-8 via a three-step kinetic mechanism. Inhibition of both caspase-3 and caspase-8 by Z-VAD-fmk and of caspase-3 by the peptidomimetic inhibitors proceeds via two rapid equilibrium steps followed by a relatively fast inactivation step. However, caspase-8 inhibition by the peptidomimetics goes through a rapid equilibrium step, a slow-binding reversible step, and an extremely slow inactivation step. The crystal structures of inhibitor complexes of caspases-3 and -8 validate the design of the inhibitors by illustrating in detail how they mimic peptide substrates. One of the caspase-8 structures also shows binding at a secondary, allosteric site, providing a possible route to the development of noncovalent small molecule modulators of caspase activity.

36 MATERIALS SCIENCE↗

Heating a plasma by a broadband stream of fast electrons: Fast ignition, shock ignition, and Gbar shock wave applications

An exact analytic solution is found for the steady-state distribution function of fast electrons with an arbitrary initial spectrum irradiating a planar low-Z plasma with an arbitrary density distribution. The solution is applied to study the heating of a material by fast electrons of different spectra such as a monoenergetic spectrum, a step-like distribution in a given energy range, and a Maxwellian spectrum, which is inherent in laser-produced fast electrons. The heating of shock- and fast-ignited precompressed inertial confinement fusion (ICF) targets as well as the heating of a target designed to generate a Gbar shock wave for equation of state (EOS) experiments by laser-produced fast electrons with a Maxwellian spectrum is investigated. A relation is established between the energies of two groups of Maxwellian fast electrons, which are responsible for generation of a shock wave and heating the upstream material (preheating). The minimum energy of the fast and shock igniting beams as well as of the beam for a Gbar shock wave generation increases with the spectral width of the electron distribution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Dark Target research aerosol algorithm for MODIS observations over eastern China: increasing coverage while maintaining accuracy at high aerosol loading

Satellite aerosol products such as the Dark Target (DT) produced from the MODerate resolution Imaging Spectroradiometer (MODIS) are useful for monitoring the progress of air pollution. Unfortunately, the DT often fails to retrieve during the heaviest aerosol events as well as the more moderate events in winter. Some of the literature at-tributes this lack of retrieval to the cloud mask. However, we found this lack of retrieval is mainly traced to thresholds used for masking of inland water and snow. Modifications to these two masks greatly increase 50 % of the retrievals of aerosol optical depth at 0.55 μm (AOD) greater than 1.0. The “extra”-high-AOD retrievals tend to be biased when com-pared with a ground-based sun photometer (AErosol RObotic NETwork, AERONET). Reducing bias in new retrievals re-quires two additional steps. One is an update to the assumed aerosol optical properties (aerosol model); the haze in this region is both less absorbing and lower in altitude than what is assumed in the global algorithm. The second is account-ing for the scale height of the aerosol, specifically that the heavy-aerosol events in the region are much closer to the surface than what is assumed by the global DT algorithm. The resulting combination of modified masking thresholds, new aerosol model, and lower aerosol layer scale height was applied to 3 months of MODIS observations (January–March2013) over eastern China. After these two additional steps are implemented, the significant increase in new retrievals introduces no overall bias at a high-AOD regime but does degrade other overall validation statistics. We also find that the research algorithm is able to identify additional pollution events that AERONET instruments may not due to different spatial sampling. Mean AOD retrieved from the re-search algorithm increases from 0.11 to 0.18 compared to values calculated from the operational DT algorithm during January to March of 2013 over the study area. But near Beijing, where the severe pollution occurs, the new algorithm increases AOD by as much as 3.0 for each 0.5°grid box over the previous operational-algorithm values.

Dark Target↗

Catalytic Mechanism of Human Alpha-galactosidase

The enzyme {alpha}-galactosidase ({alpha}-GAL, also known as {alpha}-GAL A; E.C. 3.2.1.22) is responsible for the breakdown of {alpha}-galactosides in the lysosome. Defects in human {alpha}-GAL lead to the development of Fabry disease, a lysosomal storage disorder characterized by the buildup of {alpha}-galactosylated substrates in the tissues. {alpha}-GAL is an active target of clinical research: there are currently two treatment options for Fabry disease, recombinant enzyme replacement therapy (approved in the United States in 2003) and pharmacological chaperone therapy (currently in clinical trials). Previously, we have reported the structure of human {alpha}-GAL, which revealed the overall structure of the enzyme and established the locations of hundreds of mutations that lead to the development of Fabry disease. Here, we describe the catalytic mechanism of the enzyme derived from x-ray crystal structures of each of the four stages of the double displacement reaction mechanism. Use of a difluoro-{alpha}-galactopyranoside allowed trapping of a covalent intermediate. The ensemble of structures reveals distortion of the ligand into a {sup 1}S{sub 3} skew (or twist) boat conformation in the middle of the reaction cycle. The high resolution structures of each step in the catalytic cycle will allow for improved drug design efforts on {alpha}-GAL and other glycoside hydrolase family 27 enzymes by developing ligands that specifically target different states of the catalytic cycle. Additionally, the structures revealed a second ligand-binding site suitable for targeting by novel pharmacological chaperones.

59 BASIC BIOLOGICAL SCIENCES↗

AutoCCS: automated collision cross-section calculation software for ion mobility spectrometry–mass spectrometry

Abstract Motivation Ion mobility spectrometry (IMS) separations are increasingly used in conjunction with mass spectrometry (MS) for separation and characterization of ionized molecular species. Information obtained from IMS measurements includes the ion’s collision cross section (CCS), which reflects its size and structure and constitutes a descriptor for distinguishing similar species in mixtures that cannot be separated using conventional approaches. Incorporating CCS into MS-based workflows can improve the specificity and confidence of molecular identification. At present, there is no automated, open-source pipeline for determining CCS of analyte ions in both targeted and untargeted fashion, and intensive user-assisted processing with vendor software and manual evaluation is often required. Results We present AutoCCS, an open-source software to rapidly determine CCS values from IMS-MS measurements. We conducted various IMS experiments in different formats to demonstrate the flexibility of AutoCCS for automated CCS calculation: (i) stepped-field methods for drift tube-based IMS (DTIMS), (ii) single-field methods for DTIMS (supporting two calibration methods: a standard and a new enhanced method) and (iii) linear calibration for Bruker timsTOF and non-linear calibration methods for traveling wave based-IMS in Waters Synapt and Structures for Lossless Ion Manipulations. We demonstrated that AutoCCS offers an accurate and reproducible determination of CCS for both standard and unknown analyte ions in various IMS-MS platforms, IMS-field methods, ionization modes and collision gases, without requiring manual processing. Availability and implementation https://github.com/PNNL-Comp-Mass-Spec/AutoCCS. Supplementary information Supplementary data are available at Bioinformatics online. Demo datasets are publicly available at MassIVE (Dataset ID: MSV000085979).

47 OTHER INSTRUMENTATION↗

An experimental study on fish attraction using a fish barge model

Fish-collection and transportation systems (FCTS) have been introduced and applied as innovative approaches to facilitate fish passage in China for several years. The efficacy of FCTSs depends directly on the efficiency of the fish-guidance measures employed. In this study, the effects of three parameters—water flow, artificial lighting, and bubble curtains—on the attraction of mosquitofish ( Gambusia affinis ) was investigated using a fish barge model in a large pond. The experiment was conducted in two steps. First, a univariate experiment was performed, and then, a multivariate experiment using an orthogonal design was performed. Four different colors of light were tested: 1) yellow light (570 nm), 2) blue light (460 nm), 3) warm white light (3000 K), and 4) a weak light control group, whose illuminance belongs to the interval 0.001 lx to 0.3 lx. Supplementing water flow within the barge decreased the number of attracted fish (i.e., the number of the targeted fish species that appeared within 1.5m of the barge model’s entrance) but increased the fish-collection ratio of the fish-collecting platform (i.e., the ratio of the number of attracted fish to the number of collected fish). Warm white light was shown to be significantly effective in attracting fish, while no obvious effect was observed in terms of the fish collection ratio. The bubble curtain exhibited excellent fish-attraction efficacies, but also had no significant effect on the attraction and collection efficacy of the fish-collecting platform. During the day, the optimal combination for fish attraction was to have no water flow with a bubble curtain, while the optimal combination for fish collection was to have no water flow and no bubble curtain. During the night, the optimal combination for fish attraction was to have no water flow, no bubble curtain, and a warm white light, while the optimal combination for fish collection was to have water flow, no bubble curtain, and a weak light. This study tested the combined efficacies of various fish-guidance measures on a fish-collecting platform, thus providing experimental support for optimizing various fish-attraction measures and the application of these measures in FCTS projects.

Lin, Chenyu↗

Calibration of a gated flat field spectrometer as a function of x-ray intensity

We present an experimental determination of the response of a gated flat-field spectrometer at the Shenguang-II laser facility. X-rays were emitted from a target that was heated by laser beams and then were divided into different intensities with a step aluminum filter and collected by a spectrometer. The transmission of the filter was calibrated using the Beijing Synchrotron Radiation Facility. The response characteristics of the spectrometer were determined by comparing the counts recorded by the spectrometer with the relative intensities of the x-rays transmitted through the step aluminum filter. The response characteristics were used to correct the transmission from two shots of an opacity experiment using the same samples. The transmissions from the two shots are consistent with corrections, but discrepant without corrections.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Enriching Load Data Using Micro-PMUs and Smart Meters

In modern distribution systems, load uncertainty can be fully captured by micro-PMUs, which can record high-resolution data; however, in practice, micro-PMUs are installed at limited locations in distribution networks due to budgetary constraints. In contrast, smart meters are widely deployed but can only measure relatively low-resolution energy consumption, which cannot sufficiently reflect the actual instantaneous load volatility within each sampling interval. In this paper, we have proposed a novel approach for enriching load data for service transformers that only have low-resolution smart meters. The key to our approach is to statistically recover the high-resolution load data, which is masked by the low-resolution data, using trained probabilistic models of service transformers that have both high- and low-resolution data sources, i.e., micro-PMUs and smart meters. The overall framework consists of two steps: first, for the transformers with micro-PMUs, a Gaussian Process is leveraged to capture the relationship between the maximum/minimum load and average load within each low-resolution sampling interval of smart meters; a Markov chain model is employed to characterize the transition probability of known high-resolution load. Next, the trained models are used as teachers for the transformers with only smart meters to decompose known low-resolution load data into targeted high-resolution load data. The enriched data can recover instantaneous load uncertainty and significantly enhance distribution system observability and situational awareness. Here, we have verified the proposed approach using real high- and low-resolution load data.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Crystalline Ceramic Waste Forms: Reference Formulation Report

The research conducted in this work package is aimed at taking advantage of the long term thermodynamic stability of crystalline ceramics to create more durable waste forms (as compared to high level waste glass) in order to reduce the reliance on engineered and natural barrier systems. Durable ceramic waste forms that incorporate a wide range of radionuclides have the potential to broaden the available disposal options and to lower the storage and disposal costs associated with advanced fuel cycles. Assemblages of several titanate phases have been successfully demonstrated to incorporate radioactive waste elements, and the multiphase nature of these materials allows them to accommodate variation in the waste composition. Recent work has shown that they can be successfully produced from a melting and crystallization process. The objective of this report is to explain the design of ceramic host systems culminating in a reference ceramic formulation for use in subsequent studies on process optimization and melt property data assessment in support of FY13 melter demonstration testing. The waste stream used as the basis for the development and testing is a combination of the projected Cs/Sr separated stream, the Trivalent Actinide - Lanthanide Separation by Phosphorous reagent Extraction from Aqueous Komplexes (TALSPEAK) waste stream consisting of lanthanide fission products, the transition metal fission product waste stream resulting from the transuranic extraction (TRUEX) process, and a high molybdenum concentration with relatively low noble metal concentrations. In addition to the combined CS/LN/TM High Mo waste stream, variants without Mo and without Mo and Zr were also evaluated. Based on the results of fabricating and characterizing several simulated ceramic waste forms, two reference ceramic waste form compositions are recommended in this report. The first composition targets the CS/LN/TM combined waste stream with and without Mo. The second composition targets with CS/LN/TM combined waste stream with Mo and Zr removed. Waste streams that contain Mo must be produced in reducing environments to avoid Cs-Mo oxide phase formation. Waste streams without Mo have the ability to be melt processed in air. A path forward for further optimizing the processing steps needed to form the targeted phase assemblages is outlined in this report. Processing modifications including melting in a reducing atmosphere, and controlled heat treatment schedules are anticipated to improve the targeted elemental partitioning.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗