SEARCH · Engineering Papers

Results for “trench”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

All sources NASA NTRS DOE OSTI

NASA NTRS1986

The Nazca-South American convergence rate and the recurrence of the great 1960 Chilean earthquake

The seismic slip rate along the Chile Trench estimated from the slip in the great 1960 earthquake and the recurrence history of major earthquakes has been interpreted as consistent with the subduction rate of the Nazca plate beneath South America. The convergence rate, estimated from global relative plate motion models, depends significantly on closure of the Nazca - Antarctica - South America circuit. NUVEL-1, a new plate motion model which incorporates recently determined spreading rates on the Chile Rise, shows that the average convergence rate over the last three million years is slower than previously estimated. If this time-averaged convergence rate provides an appropriate upper bound for the seismic slip rate, either the characteristic Chilean subduction earthquake is smaller than the 1960 event, the average recurrence interval is greater than observed in the last 400 years, or both. These observations bear out the nonuniformity of plate motions on various time scales, the variability in characteristic subduction zone earthquake size, and the limitations of recurrence time estimates.

Stein, S.↗

NASA NTRS1987

The effects of gas mixtures on ion engine erosion and performance

Erosion measurements were performed on a modified J-series 30 cm ion engine operating on xenon propellant. Erosion data was obtained by measuring the trench depth etched into masked polished metal samples for test durations of up to 24 hours. The data indicates that erosion is greatest at the cathode side of the baffle, with tantalum being the material with the least erosion of all materials tested. There is a clear indication of a significant reduction in erosion of all materials tested when nitrogen is added to the propellant. The technique used in these experiments requires test samples which are extremely smooth and flat.

Garner, Charles E.↗

NASA NTRS1988

Calculation of flow about posts and powerhead model

A large number of computational fluid mechanics (CFD) problems were investigated. The primary studies include: the analysis of the turnaround duct/hot gas manifold/transfer tubes (fuel side) of the Space Shuttle Main Engine (SSME); the analysis of the LOX-T manifold (oxidizer side) of the SSME; the analysis of hydrogen accumulation in the Vandeburg flame trench; and modification of the Intel/VT241 systems to accommodate the EADS and PLOT 3D. Some of the analyses were exploratory in nature, using the CONTINUSYS code to provide preliminary information to enhance understanding of the problem, while in other the primary thrust was to acquire design information. In all cases the ability to predict information rapidly in these very complex analyses is seen to be an important demonstration of the power and utility of this mature predictive capability.

Source record↗

NASA NTRS1988

A physical model for earthquakes. I - Fluctuations and interactions. II - Application to southern California

The idea that earthquakes represent a fluctuation about the long-term motion of plates is expressed mathematically through the fluctuation hypothesis, under which all physical quantities which pertain to the occurance of earthquakes are required to depend on the difference between the present state of slip on the fault and its long-term average. It is shown that under certain circumstances the model fault dynamics undergo a sudden transition from a spatially ordered, temporally disordered state to a spatially disordered, temporally ordered state, and that the latter stages are stable for long intervals of time. For long enough faults, the dynamics are evidently chaotic. The methods developed are then used to construct a detailed model for earthquake dynamics in southern California. The result is a set of slip-time histories for all the major faults, which are similar to data obtained by geological trenching studies. Although there is an element of periodicity to the events, the patterns shift, change and evolve with time. Time scales for pattern evolution seem to be of the order of a thousand years for average recurring intervals of about a hundred years.

Rundle, John B.↗

NASA NTRS1988

Intraplate deformation and closure of the Australia-Antarctica-Africa plate circuit

Plate motion data along the Southeast, Southwest, and Central Indian ridges have been reduced to 67 spreading rates, 38 transform fault azimuths, and 135 earthquake slip vectors in order to study the current motion between the Australian, Antarctic, and African plates and to investigate whether this plate circuit obeys closure. Magnetic profiles are modeled to determine rates consistently over a 3-m.y. time-averaging interval, and the new rates are shown to differ from published rates by as much as 5 mm/yr. The results indicate that Indian Ocean plate circuit nonclosure and the deformation that it suggests are much smaller than previously supposed, and support a model in which the significant deformation occurs in a diffuse plate boundary along the equatorial Indian Ocean between the Central Indian Ridge and the Sumatra Trench.

Demets, Charles↗

NASA NTRS1989

Tectonism on Venus: A review

Venus is more similar to Earth than to any other planet. It has elevated regions associated with marginal fold and thrust belts, fracture zones that extend tens of thousands of kilometers, crustal swells and shields that are hundreds of kilometers in diameter and 1 to 2 km high, and sublinear accumulations of volcanic cones and domes that stretch for thousands of kilometers across the plains. The Venusian surface is, however, distinctly different from Earth's in that: (1) its elevated terrains cannot be distinguished from its low plains on a hypsometric curve; (2) trenches have not been found plainsward of the marginal belts; (3) fracture zones bear no resemblance to mid-oceanic ridges; and (4) some features, such as the ridge-belt zone near 210 deg E, seem to have no terrestrial analog. Various theories about tectonism on Venus and Earth of other authors are reviewed.

Kozak, Richard C.↗

NASA NTRS1989

Methods for local gravity field approximation

The most widely known modern method for estimating gravity field values from observed data is least-squares collocation. Its advantages are that it can make estimates at arbitrary locations based on irregularly spaced observations, and that it makes use of statistical information about errors in the input data while providing corresponding information about the quality of the output estimates. Disadvantages of collocation include the necessity of inverting square matrices of dimension equal to the number of data values and the need to assume covariance models for the gravity field and the data errors. Fourier methods are an important alternative to collocation; having the advantage of greater computational efficiency, but requiring data estimates to be on a regular grid and not using or providing statistical accuracy information. The GEOFAST algorithm is an implementation of collocation that achieves high computational efficiency by transforming the estimation equations into the frequency domain where an accurate approximation may be made to reduce the workload. The forward and inverse Fast Fourier Transforms (FFTs) are utilized. The accuracy and computational efficiency of the GEOFAST algorithm is demonstrated using two sets of synthetic gravity data: marine gravity for an ocean trench region including wavelengths longer than 200 km; and local land gravity containing wavelengths as short as 5 km. These results are discussed along with issues such as the advantages of first removing reference field models before carrying out the estimation algorithm.

Sailor, R. V.↗

NASA NTRS1988

Energy Efficient Engine: High-pressure compressor test hardware detailed design report

The objective of the NASA Energy Efficient Engine program is to identify and verify the technology required to achieve significant reductions in fuel consumption and operating cost for future commercial gas turbine engines. The design and analysis is documented of the high pressure compressor which was tested as part of the Pratt and Whitney effort under the Energy Efficient Engine program. This compressor was designed to produce a 14:1 pressure ratio in ten stages with an adiabatic efficiency of 88.2 percent in the flight propulsion system. The corresponding expected efficiency for the compressor component test rig is 86.5 percent. Other performance goals are a surge margin of 20 percent, a corrected flow rate of 35.2 kg/sec (77.5 lb/sec), and a life of 20,000 missions and 30,000 hours. Low loss, highly loaded airfoils are used to increase efficiency while reducing the parts count. Active clearance control and case trenches in abradable strips over the blade tips are included in the compressor component design to further increase the efficiency potential. The test rig incorporates variable geometry stator vanes in all stages to permit maximum flexibility in developing stage-to-stage matching. This provision precluded active clearance control on the rear case of the test rig. Both the component and rig designs meet or exceed design requirements with the exception of life goals, which will be achievable with planned advances in materials technology.

Howe, David C.↗

NASA NTRS1989

Tectonics and volcanism in central Mexico - A Landsat Thematic Mapper perspective

Digitally enhanced Landsat Thematic Mapper (TM) images were used to map neotectonic deformation in central Mexico. This region has been studied for decades using a variety of geological and geophysical techniques, but synoptic mapping of neotectonic activity and major fault zones there, and an evaluation of their regional relationship to the character and location of volcanism were not previously possible until the application of synoptic, high resolution satellite imagery. Interpretation of the TM images shows that the tectonic deformation is closely linked in time and space to the dominantly calc-alkaline volcanics of the Mexican Volcanic Belt (MVB). The eruptive style and distribution of the volcanics is clearly related to the deformation resulting from relative motions of three large crustal blocks south of the MVB. Therefore, zones of weakness within the crust of central Mexico, which may be inherited from earlier episodes of deformation, are a principal factor controlling the oblique orientation of the MVB relative to the Acapulco Trench.

Johnson, C. A.↗

NASA NTRS1990

First GPS baseline results from the North Andes

The CASA Uno GPS experiment (January-February 1988) has provided the first epoch baseline measurements for the study of plate motions and crustal deformation in and around the North Andes. Two dimensional horizontal baseline repeatabilities are as good as 5 parts in 10 to the 8th for short baselines (100-1000 km), and better than 3 parts in 10 to the 8th for long baselines (greater than 1000 km). Vertical repeatabilities are typically 4-6 cm, with a weak dependence on baseline length. The expected rate of plate convergence across the Colombia Trench is 6-8cm/yr, which should be detectable by the repeat experiment planned for 1991. Expected deformation rates within the North Andes are of the order of 1 cm/yr, which may be detectable with the 1991 experiment.

Kellogg, James N.↗

NASA NTRS1990

Effects of height acceleration on Geosat heights

A radar altimeter tracking loop, such as that utilized by Geosat, produces height errors in the presence of persistent height acceleration h(a). The correction factor for the height error is a function of both the loop feedback parameters and the height acceleration. The correction, in meters, to the sea-surface height (SSH) derived from Geosat is -0.16 h(a), where h(a) is in m/sec per sec. The errors induced by accelerations are produced primarily by changes in along-track geoid slopes. The nearly circular Geosat orbit and dynamic ocean topography produce small h(a) values. One area studied in detail encompasses the Marianas Trench and the Challenger Deep in the west central Pacific Ocean. Histograms of SSH corrections due to range accelerations have also been determined from 24-hour segments of Geosat global data. The findings are that 20 percent of the Geosat measurements have acceleration-induced errors of 2 cm or more, while 8 percent have errors of 3 cm or more.

Hancock, David W., III↗

NASA NTRS1990

Potentially active volcanoes of Peru - Observations using Landsat Thematic Mapper and Space Shuttle imagery

A synoptic study of the volcanoes of southern Peru (14-17 deg S), the northernmost part of the Central Volcanic Zone (CVZ 14-28 deg S) of the Andes, was conducted on the basis of Landsat TM images and color photography. The volcanoes were classified and their relative ages determined using subtle glacial-morphological features. Eight of them were postulated as potentially active. These are located in a narrow volcanic zone which probably reflects a steep dip of the Nazca plate through the zone of magma generation. The break in the trend of the volcanic arc possibly reflects the complexity of the crustal stress field above a major segment boundary in the subducting plate. There are also fields of mafic monogenetic centers in this region. In comparison with the southern part of the CVZ, the general paucity of older volcanic edifices north of 17 deg S suggested a more recent onset of volcanism, a possible result of the oblique subduction of the Nazca ridge and the consequent northward migration of its intersection with the Peru-Chile trench. This, together with the lack of any large silicic caldera systems and youthful dacite domes, suggested that there are real differences in the volcanic evolution of the two parts of the CVZ.

De Silva, S. L.↗

NASA NTRS1990

Lunar surface vehicle model competition

During Fall and Winter quarters, Georgia Tech's School of Mechanical Engineering students designed machines and devices related to Lunar Base construction tasks. These include joint projects with Textile Engineering students. Topics studied included lunar environment simulator via drop tower technology, lunar rated fasteners, lunar habitat shelter, design of a lunar surface trenching machine, lunar support system, lunar worksite illumination (daytime), lunar regolith bagging system, sunlight diffusing tent for lunar worksite, service apparatus for lunar launch vehicles, lunar communication/power cables and teleoperated deployment machine, lunar regolith bag collection and emplacement device, soil stabilization mat for lunar launch/landing site, lunar rated fastening systems for robotic implementation, lunar surface cable/conduit and automated deployment system, lunar regolith bagging system, and lunar rated fasteners and fastening systems. A special topics team of five Spring quarter students designed and constructed a remotely controlled crane implement for the SKITTER model.

Source record↗

NASA NTRS1989

Gallium arsenide processing for gate array logic

The development of a reliable and reproducible GaAs process was initiated for applications in gate array logic. Gallium Arsenide is an extremely important material for high speed electronic applications in both digital and analog circuits since its electron mobility is 3 to 5 times that of silicon, this allows for faster switching times for devices fabricated with it. Unfortunately GaAs is an extremely difficult material to process with respect to silicon and since it includes the arsenic component GaAs can be quite dangerous (toxic) especially during some heating steps. The first stage of the research was directed at developing a simple process to produce GaAs MESFETs. The MESFET (MEtal Semiconductor Field Effect Transistor) is the most useful, practical and simple active device which can be fabricated in GaAs. It utilizes an ohmic source and drain contact separated by a Schottky gate. The gate width is typically a few microns. Several process steps were required to produce a good working device including ion implantation, photolithography, thermal annealing, and metal deposition. A process was designed to reduce the total number of steps to a minimum so as to reduce possible errors. The first run produced no good devices. The problem occurred during an aluminum etch step while defining the gate contacts. It was found that the chemical etchant attacked the GaAs causing trenching and subsequent severing of the active gate region from the rest of the device. Thus all devices appeared as open circuits. This problem is being corrected and since it was the last step in the process correction should be successful. The second planned stage involves the circuit assembly of the discrete MESFETs into logic gates for test and analysis. Finally the third stage is to incorporate the designed process with the tested circuit in a layout that would produce the gate array as a GaAs integrated circuit.

Cole, Eric D.↗

NASA NTRS1990

Present-day kinematics of the Rivera plate and implications for tectonics in southwestern Mexico

A model for the present-day motion of the Rivera plate relative to the North America, Cocos, and Pacific plates is derived using new data from the Pacific-Rivera rise and Rivera transform fault, together with new estimates of Pacific-Rivera motions. The results are combined with the closure-consistent NUVEL-1 global plate motion model of DeMets et al. (1990) to examine present-day deformation in southwestern Mexico. The analysis addresses several questions raised in previous studies of the Rivera plate. Namely, do plate motion data from the northern East Pacific rise require a distinct Rivera plate? Do plate kinematic data require the subduction of the Rivera plate along the seismically quiescent Acapulco trench? If so, what does the predicted subduction rate imply about the earthquake recurrence interval in the Jalisco region of southwestern Mexico?

Demets, Charles↗

NASA NTRS1991

Geochemical stratigraphy of two regolith cores from the Central Highlands of the moon

High-resolution concentration profiles are presented for 20-22 chemical elements in the under 1-mm grain-size fractions of 60001-7 and 60009/10. Emphasis is placed on the stratigraphic features of the cores, and the fresh results are compared with those of previous petrographic and geochemical studies. For elements associated with major mineral phases, the variations in concentration in both cores exceed that observed in some 40 samples of surface and trench soils. Most of the variation in lithophile element concentrations at depths of 18 to 21 cm results from the mixing of two components - oil that is relatively mafic and rich in incompatible trace elements (ITEs), and coarse-grained anorthosite. The linearity of mixing lines on two-element concentration plots argues that the relative abundances of these various subcomponents are sufficiently uniform from sample to sample and from region to region in the core that the mixture behaves effectively as a single component. Soils at depths of 52-55 cm exhibit very low concentrations of ITEs.

Korotev, R. L.↗

NASA NTRS1991

North American plate dynamics

Deformation within the North American plate in response to various tectonic processes is modeled using an elastic finite element analysis. The tectonic processes considered in the modeling include ridge forces associated with the normal thermal evolution of oceanic lithosphere, shear and normal stresses transmitted across transforms, normal stresses transmitted across convergent boundaries, stresses due to horizontal density contrasts within the continent, and shear tractions applied along the base of the plate. Model stresses are calculated with respect to a lithostatic reference stress state. Shear stresses transmitted across transform boundaries along the San Andreas and Caribbean are small, of the order of 5-10 MPa. Also, compressive stresses of the order of 5-10 MPa transmitted across the major transforms improve the fit to the data. Compressive stresses across convergent margins along the Aleutians and the Middle America trench are important.

Richardson, Randall M.↗

NASA NTRS1991

Soil crusts on Mars

Three distinct soillike materials sampled by the Viking landers (VL) on Mars are (in order of increasing strength): (1) drift; (2) crusty to cloddy; and (3) blocky. Relative strengths of these materials are manifested by footpad penetrations during landing (VL 1), depths of deep holes, motor currents during sampling, sampler backhoe penetrations, comminutor motor currents, impact pits, trench tailings, and successful acquisitions of the coarse fraction (only blocky material). Cementation by S Cl compounds probably contributes to the relative strengths. This is shown where the weight pct. of SO3 + Cl of each material is plotted against their relative strengths. A similar result is obtained using SO3 alone, but not with Cl which is deficient in VL 2 samples.

Moore, H. J.↗