Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface energetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Surface Roughness-Induced Spectral Degradation of Multi-Spaceborne Solar Diffusers Due to Space Radiation Exposure

Solar diffusers (SDs) have often been used as the onboard calibrators for the radiometric calibration of reflective solar band imaging sensors. After being spaceborne, the reflectance of SDs is observed to degrade with spectral dependence due to exposure to solar UV and energetic particle radiation. Long-term spectral reflectance data of SDs onboard multiple LEO imaging sensors, such as the Moderate Resolution Imaging Spectroradiometer (MODIS) on Terra and Aqua and the Visible Infrared Imaging Radiometer Suite (VIIRS) on SNPP, are analyzed. The reflectance of SDs on these three instruments degrades faster for the shorter wavelength (0.4-0.6 μm) bands than the longer wavelength bands. The Surface Roughness-induced Rayleigh Scattering (SRRS) model is applied to simulate the SD degradation on these instruments, and the growth of the surface roughness parameter of the SDs is derived. It is determined that the change of surface roughness scale length is ~tens of nanometers. To show the consistency of roughness growth rates among the SDs on Terra/Aqua MODIS and SNPP VIIRS instruments, the functional dependences of the growth rates are characterized according to the SD exposure time and the stage of surface roughness. It is also found that the flattening or reverse in the growth trend of the surface roughness for these three SDs occurred around the same interval between October 2013 and October 2015. The confirmation of the applicability of SRRS model with the long-term spectral reflectance data from three independent spaceborne SDs facilitates a better understanding of the origin and physical processes of the SD degradation.

Visible Infrared Imaging Radiometer Suite (VIIRS)↗

Fracto-emission - The role of charge separation

Fracto-emission is the emission of particles (e.g., electrons, ions, ground state and excited neutrals, and photons) during and following fracture. It is found that during fracture in vacuum of adhesive bonds and crystalline materials involving large amounts of charge separation on the surface the emission of charged particles, excited neutrals, light, and radio waves occurs with unique and revealing time dependencies. Simultaneous fracto-emission measurements on several systems are reported. The results are interpreted in terms of a conceptual model involving the following steps: (1) charge separation due to fracture, (2) desorption of gases from the material into the crack tip, (3) a gas discharge in the crack, (4) energetic bombardment of the freshly created crack walls, and (5) thermally stimulated electron emission, accompanied by electron stimulated desorption of ions and excited neutrals. In addition to evidence from fracture experiments, results from studies of electron bombardment of a polymer surface are presented.

Dickinson, J. T.↗

Kinetic Roughening and Energetics of Tetragonal Lysozyme Crystal Growth

Lysozyme crystal growth rates over 5 orders of magnitude in range can be described using a layer-by-layer model where growth occurs by 2D nucleation on the crystal surface. Based upon the 2D nucleation model of layer growth, the effective barrier for growth was determined to be gamma = 1.3 plus or minus 0.3 x 10(exp -13) erg/molecule, corresponding to a barrier of 3.2 plus or minus 0.7 k(sub B)T, at 22 C. For solution supersaturation, In c/c(sub eq) greater than or equal to 1.9 plus or minus 0.2, the nucleation model would not predict or consistently estimate the highest observable crystal growth rates. As such, a kinetic roughening hypothesis where crystal growth occurs by a continuous mode was implemented for all growth rate data obtained above In c(sub r)/c(sub eq) greater than or equal to 2. That is, independent of the solution conditions that vary with either buffer pH, temperature or precipitant concentration, crystal growth occurs by the continuous addition of molecules anywhere on the crystal surface, above a roughening solution supersaturation. The energy barrier, E(sub c), for the continuous growth process is determined as 6.1 plus or minus 0.4 x 10(exp -13) erg/molecule or 15 plus or minus 1 k(sub B)T at 22 C.

Gorti, Sridhar↗

Parallel-processing with surface plasmons, a new strategy for converting the broad solar spectrum

A new strategy for efficient solar-energy conversion is based on parallel processing with surface plasmons: guided electromagnetic waves supported on thin films of common metals like aluminum or silver. The approach is unique in identifying a broadband carrier with suitable range for energy transport and an inelastic tunneling process which can be used to extract more energy from the more energetic carriers without requiring different materials for each frequency band. The aim is to overcome the fundamental 56-percent loss associated with mismatch between the broad solar spectrum and the monoenergetic conduction electrons used to transport energy in conventional silicon solar cells. This paper presents a qualitative discussion of the unknowns and barrier problems, including ideas for coupling surface plasmons into the tunnels, a step which has been the weak link in the efficiency chain.

Anderson, L. M.↗

Ice Radiation Chemistry as a Source of Potential False Biomarkers on the Surface of Europa

If we find evidence of Life elsewhere in the Solar System it will probably be in form of chemical biomarkers, quintessentially biological molecules that indicate the presence of micro-organisms. While molecules such as amino acids and nucleo-bases might seem to be biomarkers, and alkyl substituted aromatics have been invoked as such, they are not necessarily. These molecules are present in some meteorites and are expected to be present on the surface of other planets even in the absence of life. Understanding the range of non-biological organic molecules which could act as false biomarkers in space is a prerequisite for any reasonable search for true biomarkers on other worlds. Our experiments have shown that some organic molecules in meteorites that appear biological in nature are formed by energetic processing of extraterrestrial ices can account for amino acids, quinones and other functionalized aromatic compounds. In the past, such molecules have been proposed as biomarkers. For example, alkylated aromatics were invoked as biomarkers in the Alan Hills 84001 'Martian meteorite.' When simple organics arrive at the surface of a body like Europa, either from below or from space, how long do they survive and what do they make? How can we distinguish these from real biomarkers?

Bernstein, Max P.↗

Energetics diagnosis of numerical simulation of atmospheric blocking

A series of systematic comprehensive diagnoses of Goddard Laboratory for Atmospheres (GLA) General Circulation Model (GCM) simulation experiments was performed in reference to predictability and energetics of the Northern Hemisphere blocking circulation. The simulation experiments were performed. The following subject areas are also covered: an analysis of simulated summer blocking episodes; energetics examination of winter blocking simulations in the Northern Hemisphere; normal mode energetic and error analysis of GLA GCM simulations with the different horizontal resolutions during a winter month; and simulations of winter blocking episodes using observed sea surface temperatures.

Kung, Ernest C.↗

Future radiation measurements in low Earth orbit

The first Long Duration Exposure Facility (LDEF) mission has demonstrated the value of the LDEF concept for deep surveys of the space radiation environment. This paper will survey the types of measurements that could be done on a second LDEF mission. One of the most surprising discoveries on LDEF1 was the Be-7 that was found imbedded on the windward surface. LDEF2 could follow up on this discovery and search for evidence of other cosmogenic nuclei. Another experiment could be designed to investigate the presence of energetic heavy ions observed on LDEF1. The relative abundance of rare earths can also be used to search for evidence that cosmic rays accelerate in episodes which occur throughout their propagation in the stellar medium. Further investigations of radiation effects could also be undertaken. A second LDEF mission also offers the opportunity for new investigations such as measurements of cosmic ray differential energy spectrum to ultrahigh energies. These and other ideas will be discussed.

Adams, James H., Jr.↗

Low-frequency variability and wavenumber selection in models with zonally symmetric forcing

The authors consider a two-layer quasigeostrophic model with linear surface drag and forcing that relaxes to a zonal baroclinically unstable equilibrium state consisting of a meridionally confined temperature gradient. It is observed that the most energetic wave in the time-mean climate has near zero frequency and is not driven by upscale nonlinear energy transfers. This wave has a zonal scale near the long-wave cutoff of the equilibrium state, and its energy balance is mainly between baroclinic generation and dissipation. This maintenance mechanism is different from that suggested by beta-plane, two-dimensional, and quasigeostrophic turbulence arguments and may be relevant to the dynamics of zonally asymmetric low-frequency variability in the atmosphere, particularly in the Southern Hemisphere.

Whitaker, Jeffrey S.↗

Deep Dielectric Charging of Spacecraft Polymers by Energetic Protons

The majority of research in the field of spacecraft charging concentrates on electron charging effects with little discussion of charging by protons. For spacecraft orbiting in the traditional LEO and GEO environments this emphasis on electrons is appropriate since energetic electrons are the dominant species in those orbits. But for spacecraft in orbits within the inner radiation belts or for interplanetary and lunar space probes, proton charging (center dot) effects may also be of concern. To examine bulk spacecraft charging effects in these environments several typical highly insulating spacecraft polymers were exposed to energetic protons (center dot) with energies from 1 Me V to lO Me V to simulate protons from the solar wind and from solar energetic proton events. Results indicate that effects in proton charged dielectrics are distinctly different than those observed due to electron charging. In most cases, the positive surface potential continued to increase for periods on the order of minutes to a day, followed by long time scale decay at rates similar to those observed for electron charging. All samples charged to positive potentials with substantially lower magnitudes than for equivalent electron doses. Possible explanations for the different behavior of the measured surface potentials from proton irradiation are discussed; these are related to the evolving internal charge distribution from energy dependent electron and proton transport, electron emission, charge migration due to dark current and radiation induced conductivity, and electron capture by embedded protons.

radiation induced conductivity↗

Formulation and Testing of Paraffin-Based Solid Fuels Containing Energetic Additives for Hybrid Rockets

Many approaches have been considered in an effort to improve the regression rate of solid fuels for hybrid rocket applications. One promising method is to use a fuel with a fast burning rate such as paraffin wax; however, additional performance increases to the fuel regression rate are necessary to make the fuel a viable candidate to replace current launch propulsion systems. The addition of energetic and/or nano-sized particles is one way to increase mass-burning rates of the solid fuels and increase the overall performance of the hybrid rocket motor.1,2 Several paraffin-based fuel grains with various energetic additives (e.g., lithium aluminum hydride (LiAlH4) have been cast in an attempt to improve regression rates. There are two major advantages to introducing LiAlH4 additive into the solid fuel matrix: 1) the increased characteristic velocity, 2) decreased dependency of Isp on oxidizer-to-fuel ratio. The testing and characterization of these solid-fuel grains have shown that continued work is necessary to eliminate unburned/unreacted fuel in downstream sections of the test apparatus.3 Changes to the fuel matrix include higher melting point wax and smaller energetic additive particles. The reduction in particle size through various methods can result in more homogeneous grain structure. The higher melting point wax can serve to reduce the melt-layer thickness, allowing the LiAlH4 particles to react closer to the burning surface, thus increasing the heat feedback rate and fuel regression rate. In addition to the formulation of LiAlH4 and paraffin wax solid-fuel grains, liquid additives of triethylaluminum and diisobutylaluminum hydride will be included in this study. Another promising fuel formulation consideration is to incorporate a small percentage of RDX as an additive to paraffin. A novel casting technique will be used by dissolving RDX in a solvent to crystallize the energetic additive. After dissolving the RDX in a solvent chosen for its compatibility with both paraffin and RDX, the mixture will be combined with the melted paraffin. With the melting point of the paraffin far below the decomposition temperature of the RDX, the solvent will be boiled off, leaving the crystallized RDX embedded in the paraffin. At low percentages of RDX additive and with crystallized RDX surrounded by paraffin, the fuel grains will remain inert, maintaining a key benefit of hybrids in the safety of the solid fuel.

Larson, Daniel B.↗

Two-dimensiosnal electron beam charging model for polymer films

A two dimensional model was developed to describe the charging of thin polymer films exposed to a uniform mon-energetic electron beam. The study was motivated by observed anomalous behavior of geosynchronous satellites which was attributed to electrical discharges associated with the differential charging of satellite surfaces of magnetospheric electrons. Electric fields both internal and external to the irradiated specimen were calculated at steady state in order to identify regions of high electrical stress. Particular emphasis was placed on evaluating the charging characteristics near the material's edge. The model was used to identify and quantify the effects of some of the experimental parameters notably: beam energy; beam angle of incidence; beam current density; material thickness; and material width. Simulations of the following situations were also conducted: positive or negative precharging over part of the surface; a central gap in the material; and a discontinuity in the material's thickness.

Reeves, R. D.↗

Oceanic eddy variability measured by GEOS 3 altimeter crossover differences

Eddy statistics of sea height variations associated with dynamic ocean currents, gathered by GEOS 3 altimetry (25 cm), are discussed. Time variable flow is noted to be measureable using altimeter height and orbit information by means of three techniques: collinear tracks, where rms variability can be determined for mesoscale phenomena measured along parallel tracks; mean surfaces, using a 3-dimensional mapping of the sea surface for an accurate representation of the surface undulations; and crossover differences, such as between data tracks from GEOS and Seasat which have reduced ephemeris error over scales of a few thousand km. Mesoscale energetics have been found suitable for tracing meandering ocean currents by the crossover method. Possible sources of error are considered, including altimeter noise, orbit error, short wavelength continental shelf tides, etc., and it is determined that observations of mesoscale sea height appear to be limited only by uncertainties in the altimetry, which for Seasat was 5 cm over 60% of the world's oceans.

Cheney, R. E.↗

Planetary volatile history - Principles and practice

The history and evolution of planetary volatile inventories are considered. Planetary bulk volatile inventories are greatly affected by the distance from the preplanetary nebula center at which material accreted, with volatile contents increasing with increasing distance from the nebula center. Other significant factors include: planetary energetics and internal thermal history, planetary volatile sinks (including space), and operation of external variables such as solar energy on the transient, steady-state array of surface volatiles. The net result of all these processes is a volatile history that is itself a controlling factor in overall planetary history.

Fanale, F. P.↗

Contribution of cool dust to the FIR brightness distribution of NGC 6946 Sc(s)2

A few galaxies have been observed at submillimeter wavelengths (Stark et al., 1988; Eales, Wynn-Williams, and Duncan, 1988). These observations do not support the hypothesis that there exist substantial amounts of cool dust generating submillimeter radiation in excess of predictions from modified blackbody curves of the form (1/lambda)exp 1.5 B sub v (v, T) fit to total 100 and 160 micron fluxes. However, researchers find relatively cold dust (approx. 17 to 23 degrees K) at several interarm locations in the central 5 minute by 5 minute region of NGC 6946 Sc(s)II. Since molecular gas is the predominate constituent of the interstellar medium (ISM) in this region, such low dust temperatures are indicative of quiescent molecular clouds and low star formation rates. Based on the contribution of cool grains to the 160 micron surface brightness distribution, regions of low star formation activity can be identified. A 1/lambda exp 1.5 emissivity law is assumed for this analysis. Researchers assumed a two temperature grain model in an effort to decompose the far infrared surface brightness distribution of NGC 6946 into contributions from cool, quiescent and active, star forming regions. This model has some validity; although an oversimplification of the dust energetics, researchers find from it that, where giant HII regions are sparse, a significant fraction of the 160 micron emission is emitted by a cool grain component which the Infrared Astronomy Satellite (IRAS) could barely detect.

Engargiola, Greg↗

Extreme Spacecraft Charging in Polar Low Earth Orbit

Spacecraft in low altitude, high inclination (including sun-synchronous) orbits are widely used for remote sensing of the Earth's land surface and oceans, monitoring weather and climate, communications, scientific studies of the upper atmosphere and ionosphere, and a variety of other scientific, commercial, and military applications. These systems episodically charge to frame potentials in the kilovolt range when exposed to space weather environments characterized by a high flux of energetic (~10 s kilovolt) electrons in regions of low background plasma density which is similar in some ways to the space weather conditions in geostationary orbit responsible for spacecraft charging to kilovolt levels. We first review the physics of space environment interactions with spacecraft materials that control auroral charging rates and the anticipated maximum potentials that should be observed on spacecraft surfaces during disturbed space weather conditions. We then describe how the theoretical values compare to the observational history of extreme charging in auroral environments. Finally, a set of extreme DMSP charging events are described varying in maximum negative frame potential from ~0.6 kV to ~2 kV, focusing on the characteristics of the charging events that are of importance both to the space system designer and to spacecraft operators. The goal of the presentation is to bridge the gap between scientific studies of auroral charging and the need for engineering teams to understand how space weather impacts both spacecraft design and operations for vehicles on orbital trajectories that traverse auroral charging environments.

Colson, Andrew D.↗

Energetic particle signatures of satellites and rings in Neptune's magnetosphere

The cosmic ray system on Voyager 2 found a trapped radiation environment in Neptune's inner magnetosphere which is controlled primarily by absorption at the rings and satellite surfaces. The intensity of electrons with kinetic energies approximately greater than 1 MeV shows particularly strong and narrow signatures associated with absorption by the satellite 1989N1 at an orbital radius of 4.75 Neptune radii. Closer to the planet are several signatures of the inner satellites and rings. Absorption limits the intensity of the inner radiation belt sufficiently for the maximum intensity to occur outside the orbit of 1989N1 at a magnetic L shell of about 7. Radial profiles of the electron phase space density show that electrons diffuse inward from a source in the outer magnetosphere. Many of the inward-diffusing electrons are absorbed upon reaching a satellite orbital radius, but the finite absorption efficiency allows some of the electrons to pass by unaffected. The locations of the satellite and ring signatures also provide constraints on the nondipolar components of the planetary magnetic field.

Selesnick, R. S.↗

Extreme Spacecraft Charging in Polar Low Earth Orbit

Spacecraft in low altitude, high inclination (including sun -synchronous) orbits are widely used for remote sensing of the Earth fs land surface and oceans, monitoring weather and climate, communications, scientific studies of the upper atmosphere and ionosphere, and a variety of other scientific, commercial, and military applications. These systems episodically charge to frame potentials in the kilovolt range when exposed to space weather environments characterized by a high flux of energetic (approx.10 fs kilovolt) electrons in regions of low background plasma density. Auroral charging conditions are similar in some ways to the space weather conditions in geostationary orbit responsible for spacecraft charging to kilovolt levels. We first review the physics of space environment interactions with spacecraft materials that control auroral charging rates and the anticipated maximum potentials that should be observed on spacecraft surfaces during disturbed space weather conditions. We then describe how the theoretical values compare to the observational history of extreme charging in auroral environments. Finally, a set of extreme DMSP charging events are described varying in maximum negative frame potential from approx.0.6 kV to approx.2 kV, focusing on the characteristics of the charging events that are of importance both to the space system designer and to spacecraft operators. The goal of the presentation is to bridge the gap between scientific studies of auroral charging and the need for engineering teams to understand how space weather impacts both spacecraft design and operations for vehicles on orbital trajectories that traverse auroral charging environments.

Colson, Andrew D.↗

Thermal electron heating rate: A derivation

The thermal electron heating rate is an important heat source term in the ionospheric electron energy balance equation, representing heating by photoelectrons or by precipitating higher energy electrons. A formula for the thermal electron heating rate is derived from the kinetic equation using the electron-electron collision operator as given by the unified theory of Kihara and Aono. This collision operator includes collective interactions to produce a finite collision operator with an exact Coulomb logarithm term. The derived heating rate O(e) is the sum of three terms, O(e) = O(p) + S + O(int), which are respectively: (1) primary electron production term giving the heating from newly created electrons that have not yet suffered collisions with the ambient electrons; (2) a heating term evaluated on the energy surface m(e)/2 = E(T) at the transition between Maxwellian and tail electrons at E(T); and (3) the integral term representing heating of Maxwellian electrons by energetic tail electrons at energies ET. Published ionospheric electron temperature studies used only the integral term O(int) with differing lower integration limits. Use of the incomplete heating rate could lead to erroneous conclusions regarding electron heat balance, since O(e) is greater than O(int) by as much as a factor of two.

Hoegy, W. R.↗