Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “studies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Radiation Damage Studies on Titanium Alloys as High Intensity Proton Accelerator Beam Window Materials

A high-strength dual a+ß phase titanium alloy Ti–6Al–4V is utilized as a material for beam windows in several accelerator target facilities. However, relatively little is known about how material properties of this alloy are affected by high-intensity proton beam irradiation. With plans to upgrade neutrino facilities at J-PARC and Fermilab to over 1 MW beam power, the radiation damage in the window material will reach a few displacements per atom (dpa) per year, significantly above the ~0.3 dpa level of existing data. The international RaDIATE collaboration, Radiation Damage In Accelerator Target Environments, has conducted a high intensity proton beam irradiation of various target and window material specimens at Brookhaven Linac Isotope Producer (BLIP) facility, including a variety of titanium alloys. Post-Irradiation Examination (PIE) of the specimens in the 1st capsule, irradiated at up to 0.25 dpa, is in progress. Tensile tests in a hot cell at Pacific Northwest National Laboratory (PNNL) exhibited a clear signature of radiation hardening and loss of ductility for Ti–6Al–4V, while Ti–3Al–2.5V, with less ß phase, exhibited less severe hardening. Microstructural investigations will follow to study the cause of the difference in tensile behavior between these alloys. High-cycle fatigue (HCF) performance is critical to the lifetime estimation of beam windows exposed to a periodic thermal stress from a pulsed proton beam. The first HCF data on irradiated titanium alloys are to be obtained by a conventional bend fatigue test at Fermilab and by an ultrasonic mesoscale fatigue test at Culham Laboratory. Specimens in the 2nd capsule, irradiated at up to ~1 dpa, cover typical titanium alloy grades, including possible radiation-resistant candidates. These systematic studies on the effects of radiation damage of titanium alloy materials are intended to enable us not only to predict realistic lifetimes of current beam windows made of Ti–6Al–4V, but also to extend the lifetime by choosing a more radiation and thermal shock tolerant alloy with a preferable heat treatment, or even by developing new materials.

Titanium Alloy, Beam Window, Proton Beam, Radiatio↗

Study of life support systems for space missions exceeding one year in duration, phase 1A. Volume 2 - Mission studies

The study covered by this report is a continuation of the work conducted under ' contract NAS 2-3012, Study of Life Support Systems For Space Missions Exceeding One Year In Duration Phase I. The previous work compared biological and chemical food processing systems with a stored food system for hypothetical missions of from 10 to 100 men for one to three years. The follow-on work Phase IA, the subject of this report, reviewed new concepts for waste processing and food manufacture in the closed system such as wastes for radiation shielding, wastes for propulsion, glycerol synthesis using chromatographic reactors, glycerol synthesis using acetylene as an intermediate, animal links, the use of radiophosphors for algae illumination, and new biological system approaches. The most promising of these new concepts were combined with the food producing systems evolved in Phase I and compared for three specific model missions; Earth orbit, lunar and mars. The effects of spacecraft power penalty, leakage rate, radiation shielding requirements and extravehicular expendable requirements were assessed and a cost effectiveness analysis was completed for each mission. The cost analysis compared the launch cost savings of the advanced systems with the R&D costs required to produce a flight ready system. The study results indicate that systems using wastes for radiation shielding, leakage makeup, or EVA expendables are very competitive with the biological and chemical food systems for all missions. The stored food baseline system and wastes for propulsion ranked poorly in the comparison studies.

R. B. Jagow↗

Study of extraterrestrial disposal of radioactive wastes. Part 3: Preliminary feasibility screening study of space disposal of the actinide radioactive wastes with 1 percent and 0.1 percent fission product contamination

A preliminary study was conducted of the feasibility of space disposal of the actinide class of radioactive waste material. This waste was assumed to contain 1 and 0.1 percent residual fission products, since it may not be feasible to completely separate the actinides. The actinides are a small fraction of the total waste but they remain radioactive much longer than the other wastes and must be isolated from human encounter for tens of thousands of years. Results indicate that space disposal is promising but more study is required, particularly in the area of safety. The minimum cost of space transportation would increase the consumer electric utility bill by the order of 1 percent for earth escape and 3 percent for solar escape. The waste package in this phase of the study was designed for normal operating conditions only; the design of next phase of the study will include provisions for accident safety. The number of shuttle launches per year required to dispose of all U.S. generated actinide waste with 0.1 percent residual fission products varies between 3 and 15 in 1985 and between 25 and 110 by 2000. The lower values assume earth escape (solar orbit) and the higher values are for escape from the solar system.

Hyland, R. E.↗

Design/cost tradeoff studies. Earth Observatory Satellite system definition study (EOS)

The results of design/cost tradeoff studies conducted during the Earth Observatory Satellite system definition studies are presented. The studies are concerned with the definition of a basic modular spacecraft capable of supporting a variety of operational and/or research and development missions, with the deployment either by conventional launch vehicles or by means of the space shuttle. The three levels investigated during the study are: (1) subsystem tradeoffs, (2) spacecraft tradeoffs, and (3) system tradeoffs. The range of requirements which the modular concept must span is discussed. The mechanical, thermal, power, data and electromagnetic compatibility aspects of modularity are analyzed. Other data are provided for the observatory design concept, the payloads, integration and test, the ground support equipment, and ground data management systems.

Source record↗

US Forest Service and National Park Service Wilderness Aircraft Overflight Study: Sociological background and study plans

The background and sociological aspects of the combined U.S. Forest Service and National Park Service Wilderness Aircraft Overflight Study (WACOS) are presented. The WACOS broaches a new area of research by combining aspects of outdoor recreation sociology and aircraft noise response studies. The tasks faced create new challenges and require innovative solutions. Background information on the WACOS is presented with special emphasis on sociological considerations. At the time of this writing, no data have yet been collected, so this paper will present background information, related issues, and plans for data collection. Some recent studies indicate that managers of Forest Service wildernesses and National Park Service areas consider aircraft overflights to be a problem to their users in some areas. Additional relevant background research from outdoor recreation sociology is discussed, followed by presentation of the authors' opinions of the most salient sociological issues faced by this study. The goals and desired end products are identified next, followed by a review of the methods anticipated to be used to obtain these results. Finally, a discussion and conclusion section is provided.

Harrison, Robin T.↗

Operationally efficient propulsion system study (OEPSS) data book: Space Transfer Propulsion Operational Efficiency Study Task of OEPSS - Volume 6

This document is the final report for the Space Transfer Propulsion Operational Efficiency Study Task of the Operationally Efficient Propulsion System Study (OEPSS) conducted by the Rocketdyne Division of Rockwell International. This Study task studied, evaluated and identified design concepts and technologies which minimized launch and in-space operations and optimized in-space vehicle propulsion system operability.

Harmon, Timothy J.↗

Tea consumption and risk of bladder cancer in the Bladder Cancer Epidemiology and Nutritional Determinants (BLEND) Study: Pooled analysis of 12 international cohort studies

Tea has been shown to be associated with reduced risk of several diseases including cardiovascular diseases, stroke, metabolic syndrome, and obesity. However, the results on the relationship between tea consumption and bladder cancer are conflicting. This research aimed to assess the association between tea consumption and risk of bladder cancer using a pooled analysis of prospective cohort data. Individual data from 532,949 participants in 12 cohort studies, were pooled for analyses. Cox regression models stratified by study centre was used to estimate hazard ratios (HR) and corresponding 95% CIs. Fractional polynomial regression models were used to examine the dose–response relationship. A higher level of tea consumption was associated with lower risk of bladder cancer incidence (compared with no tea consumption: HR = 0.87, 95% C.I. = 0.77–0.98 for low consumption; HR = 0.86, 95% C.I. = 0.77–0.96 for moderate consumption; HR = 0.84, 95% C.I. = 0.75–0.95 for high consumption). When stratified by sex and smoking status, this reduced risk was statistically significant among men and current and former smokers. In addition, dose–response analyses showed a lower bladder cancer risk with increment of 100 ml of tea consumption per day (HR-increment = 0.97; 95% CI = 0.96–0.98). A similar inverse association was found among males, current and former smokers while never smokers and females showed non-significant results, suggesting potential sex-dependent effect. Higher consumption of tea is associated with reduced risk of bladder cancer with potential interaction with sex and smoking status. Further studies are needed to clarify the mechanisms for a protective effect of tea (e.g. inhibition of the survival and proliferation of cancer cells and anti-inflammatory mechanisms) and its interaction with smoking and sex.

60 APPLIED LIFE SCIENCES↗

1,2-Propanediol as a Surrogate Molecule of Glycerol for Mechanistic Studies of Selective Hydrodeoxygenation Reactions over Mo 2 C and Cu/Mo 2 C Surfaces

The upgrading of glycerol, a byproduct from biodiesel production, is important for developing more sustainable biomass conversion technologies. Nonetheless, the low vapor pressure and structural complexity of glycerol limit mechanistic studies of gas-phase reactions on model surfaces and powder catalysts. In this work, we demonstrate the feasibility of using 1,2-propanediol (PDO) as a surrogate compound for the mechanistic study of glycerol over Mo 2 C and Cu/Mo 2 C surfaces. Here, the results show that glycerol and 1,2-PDO undergo similar reaction pathways on both the Mo and Cu sites, suggesting that 1,2-PDO could be used as a higher vapor pressure surrogate to glycerol for gas-phase mechanistic studies.

1,2-Propanediol↗

Genome‐wide association study of multiple yield traits in a diversity panel of polyploid sugarcane ( Saccharum spp.)

Abstract Sugarcane ( Saccharum spp.) is an important economic crop, contributing up to 80% of sugar and approximately 60% of biofuel globally. To meet the increased demand for sugar and biofuel supplies, it is critical to breed sugarcane cultivars with robust performance in yield traits. Therefore, dissection of causal DNA sequence variants is of great importance, as it provides genetic resources and fundamental information for crop improvement. In this study, we analyzed nine yield traits in a sugarcane diversity panel consisting of 308 accessions primarily selected from the World Collection of Sugarcane and Related Grasses. By genotyping the diversity panel via target enrichment sequencing, we identified a large number of sequence variants. Genome‐wide association studies between the markers and traits were conducted, taking dosages and gene actions into consideration. In total, 217 nonredundant markers and 225 candidate genes were identified to be significantly associated with the yield traits, which can serve as a comprehensive genetic resource database for future gene identification, characterization, and selection for sugarcane improvement. We further investigated runs of homozygosity (ROH) in the sugarcane diversity panel. We characterized 282 ROHs and found that the occurrence of ROHs in the genome were nonrandom and probably under selection. The ROHs were associated with total weight and dry weight, and high ROHs resulted in a decrease in the two traits. This study suggests that genomic inbreeding has led to negative impacts on sugarcane yield.

Yang, Xiping↗

Magnetic resonance imaging as a non-invasive method for the assessment of pancreatic fibrosis (MINIMAP): a comprehensive study design from the consortium for the study of chronic pancreatitis, diabetes, and pancreatic cancer

Characteristic features of chronic pancreatitis (CP) may be absent on standard imaging studies. Quantitative Magnetic Resonance Imaging (MRI) techniques such as T{sub 1} mapping, extracellular volume (ECV) fraction, diffusion-weighted imaging (DWI) with apparent diffusion coefficient map (ADC), MR elastography (MRE), and T{sub 1}-weighted signal intensity ratio (SIR) have shown promise for the diagnosis and grading severity of CP. However, radiologists still use the Cambridge classification which is based on traditional ductal imaging alone. There is an urgent need to develop new diagnostic criteria that incorporate both parenchymal and ductal features of CP seen by MRI/MRCP. Designed to fulfill this clinical need, we present the MINIMAP study, which was funded in September 2018 by the National Institutes of Health. This is a comprehensive quantitative MR imaging study which will be performed at multiple institutions in well-phenotyped CP patient cohorts. We hypothesize that quantitative MRI/MRCP features can serve as valuable non-invasive imaging biomarkers to detect and grade CP. We will evaluate the role of T{sub 1} relaxometry, ECV, T{sub 1}-weighted gradient echo SIR, MRE, arteriovenous enhancement ratio, ADC, pancreas volume/atrophy, pancreatic fat fraction, ductal features, and pancreatic exocrine output following secretin stimulation in the assessment of CP. We will attempt to generate a multi-parametric pancreatic tissue fibrosis (PTF) scoring system. We anticipate that a quantitative scoring system may serve as a biomarker of pancreatic fibrosis; hence this imaging technique can be used in clinical practice as well as clinical trials to evaluate the efficacy of agents which may slow the progression or reverse measures of CP.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

A Theoretical Study on Reaction Mechanisms and Kinetics of Thiophene Hydrodesulfurization over MoS 2 Catalysts

In the present work, thiophene hydrodesulphurization (HDS) over the Mo-edge, the S-edge, and the Mo-S connection edge of MoS 2 catalyst with 50% sulfur coverage was studied using first-principles based microkinetic modeling. Two parallel HDS routes, i.e., direct desulfurization (DDS) and hydrogenation (HYD) were taken into account. It has been found that the major reaction route of thiophene HDS on the Mo- and the Mo-S edges is temperature dependent. In the low temperature range of 500~600 K, the HYD route is dominant, leading to the C 4 H 8 formation. As the temperature increases, the DDS route becomes competitive with the HYD route. At the temperature above 650 K, the DDS route will be the dominant HDS reaction route on the Mo- and the Mo-S edges. While the DDS route that leads to the formation of C4H6 is the major thiophene HDS reaction route on the S-edge in the entire temperature range of 500~750 K. The microkinetic modeling results show the overall HDS activity on the S-edge is lower than it on the Mo- and the Mo-S edges. The Mo-S edge also provides a preferential reaction pathway, which facilitates 2-hydrothiophene migration from the Mo-edge to the S-edge, followed by remaining elementary steps with lower activation barriers in the DDS route. The work was financially supported by the National Natural Science Foundation of China (No. 21476012, 21571012, 21407007 and 91534201). The computing time was granted by a scientific theme user proposal in the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL), which is a U.S. Department of Energy national scientific user facility located at Pacific Northwest National Laboratory (PNNL) in Richland, Washington. Part of computing time was provided the National Energy Research Scientific Computing Center (NERSC). D. Mei is supported by the US Department of Energy, Office of Sciences, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences.

Thiophene, hydrodesulphurization, MoS2, DFT, micro↗

Molecular level study of uni/multi-axial deformation response of tobermorite 11 Å: A force field comparison study

Molecular deformation response of tobermorite 11 Å (a mineral analogue to C-S-H, the primary constituent of hydrated cement paste) under uni/tri-axial loading (both tension and compression) has been investigated in this manuscript using empirical and reactive force fields. A comparison has been chalked out amongst the responses using different force fields. Evolution of atomic environment during the deformation have studied using reactive force field. This study demonstrate the key observations on the application of different force fields to study the large deformation behaviour of the material.

36 MATERIALS SCIENCE↗

The effectiveness of the mitigation hierarchy in environmental impact studies on marine ecosystems: A case study in France

While the development of maritime economic activity is increasingly encouraged, the consideration of its impacts constitutes a real challenge. The limitations of the implementation of the mitigation hierarchy have been widely discussed in scientific literature, yet data on marine biodiversity offset practices remains scarce. In this study, we investigated the use of Environmental Impact Assessments (EIAs) as suitable instruments to achieve the No Net Loss objective. Drawing on a French approach developed for the initial assessment of the European Marine Strategy Framework Directive, we examined the pressures and impacts related to various marine development projects and the effectiveness of the mitigation hierarchy in limiting these. An analysis of 55 recent French environmental impact studies showed that only 7% of the proposed measures had the aim of offsetting predicted degradation of sites of remarkable biodiversity. This can be partly explained by the lack of a clear definition of ‘significant impact’, which varies greatly depending on what is impacted, in turn allowing socio-economic activities to benefit more easily from offset. Furthermore, offsetting does not always constitute the final step of the mitigation hierarchy, highlighting the need to reinforce avoidance and reduction steps. Although we acknowledge the role of EIA in mitigating the negative impacts of development projects, synergies with other European marine environmental policies such as the Marine Strategy Framework Directive (MSFD) and the Maritime Spatial Planning directive (MSP) should be developed in order to improve current practices. - Highlights: • Avoidance measures were not well represented in the Environmental Impact Assessments studied. • Few significant residual impacts and measures to offset these were described. • Common biodiversity did not benefit from offset measures. • The equivalency of proposed marine offsets is questionable.

54 ENVIRONMENTAL SCIENCES↗