SEARCH · Engineering Papers

Results for “spectroscopic techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Bayesian Component Separation for DESI LAE Automated Spectroscopic Redshifts and Photometric Targeting

Lyα emitters (LAEs) are valuable high-redshift cosmological probes traditionally identified using specialized narrowband photometric surveys. In ground-based spectroscopy, it can be difficult to distinguish the sharp LAE peak from residual sky emission lines using automated methods, leading to misclassified redshifts. We present a Bayesian spectral component separation technique to automatically determine spectroscopic redshifts for LAEs while marginalizing over sky residuals. We use visually inspected spectra of LAEs obtained using the Dark Energy Spectroscopic Instrument (DESI) to create a data-driven prior and can determine redshift by jointly inferring sky residual, LAE, and residual components for each individual spectrum. We demonstrate this method on 881 spectroscopically observed z = 2–4 DESI LAE candidate spectra and determine their redshifts with >90% accuracy when validated against visually inspected redshifts. Using the Δχ$^{2}$ value from our pipeline as a proxy for detection confidence, we then explore potential survey design choices and implications for targeting LAEs with medium-band photometry. This method allows for scalability and accuracy in determining redshifts from DESI spectra, and the results provide recommendations for LAE targeting in anticipation of future high-redshift spectroscopic surveys.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2024

Resolving the Electron Plume within a Scanning Electron Microscope

Scanning electron microscopy (SEM), a century-old technique, is today a ubiquitous method of imaging the surface of nanostructures. However, most SEM detectors simply count the number of secondary electrons from a material of interest, and thereby overlook the rich material information contained within them. Here, by simple modifications to a standard SEM tool, we resolve the momentum and energy information on secondary electrons by directly imaging the electron plume generated by the electron beam of the SEM. Leveraging these spectroscopic imaging capabilities, our technique is able to image lateral electric fields across a prototypical silicon p–n junctions and to distinguish differently doped regions, even when buried beyond depths typically accessible by SEM. Intriguingly, the subsurface sensitivity of this technique reveals unexpectedly strong surface band bending within nominally passivated semiconductor structures, providing useful insights for complex layered component designs, in which interfacial dynamics dictate device operation. Further, these capabilities for noninvasive, multimodal probing of complicated electronic components are crucial in today’s electronic manufacturing but is largely inaccessible even with sophisticated techniques. These results show that seemingly simple SEM can be extended to probe complex and useful material properties.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Detection and Aggregation of Listeria Monocytogenes Using Polyclonal Antibody Gold-Coated Magnetic Nanoshells Surface-Enhanced Raman Spectroscopy Substrates

Magnetic nanoshells with tailored surface chemistry can enhance bacterial detection and separation technologies. This work demonstrated a simple technique to detect, capture, and aggregate bacteria with the aid of end-functionalized polyclonal antibody gold-coated magnetic nanoshells (pAb-Lis-AuMNs) as surface-enhanced Raman spectroscopy (SERS) probes. Listeria monocytogenes were used as the pathogenic bacteria and the pAb-LisAuMNs, 300 nm diameter, were used as probes allowing facile magnetic separation and aggregation. An optimized covalent bioconjugation procedure between the magnetic nanoshells and the polyclonal antibody was performed at pH six via a carbodiimide crosslinking reaction. Spectroscopic and morphological characterization techniques confirmed the fabrication of stable pAb-Lis-AuMNs. The resulting pAb-Lis-AuMNs acted as a SERS probe for L. monocytogenes based on the targeted capture via surface binding interactions and magnetically induced aggregation. Label-free SERS measurements were recorded for the minimum detectable amount of L. monocytogenes based on the SERS intensity at the 1388 cm -1 Raman shift. L. monocytogenes concentrations exhibited detection limits in the range of 10 4 –10 7 CFU ml -1 , before and after aggregation. By fitting these concentrations, the limit of detection of this method was ~10 3 CFU ml -1 . Using a low-intensity magnetic field of 35 G, pAb-LisAuMNs aggregated L. monocytogenes as demonstrated with microscopy techniques, including SEM and optical microscopy. Overall, this work presents a label-free SERS probe method comprised of a surface-modified polyclonal antibody sub-micron magnetic nanoshell structures with high sensitivity and magnetic induced separation that could lead to the fabrication of multiple single-step sensors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2024

Status of the Dark Energy Spectroscopic Instrument (DESI) and Year 1 Cosmology results

The Dark Energy Spectroscopic Instrument (DESI) will measure the effect of dark energy on the expansion of the universe. It will obtain optical spectra for tens of millions of galaxies and quasars, constructing a 3D map spanning the nearby universe to 11 billion light years. The DESI Survey is being conducted on the Mayall 4-meter telescope at Kitt Peak National Observatory. DESI is supported by the Department of Energy Office of Science to perform this Stage IV dark energy measurement using baryon acoustic oscillations and other techniques that rely on spectroscopic measurements. I will discuss the status of the Dark Energy Spectroscopic Instrument (DESI) survey and present our Year 1 Baryon Acoustic Oscillation measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2020

Probing Dopant Redistribution, Phase Propagation, and Local Chemical Changes in the Synthesis of Layered Oxide Battery Cathodes

Achieving the targeted control of layered oxide properties calls for more fundamental studies to mechanistically probe their evolution during their synthesis. Herein, dopant distribution, phase propagation, and local chemical changes as well as their interplay in multielement-doped LiNiO 2 materials are investigated using spectroscopic, imaging, and scattering techniques. It is shown that dopants undergo dynamic redistribution in the Ni(OH) 2 host lattice at the early stage of calcination (below 300 °C). Such redistribution behavior exhibits strong dopant-dependent characteristics, allowing for targeted surface and bulk doping control. The Ni oxidation process exhibits depth-dependent characteristics and the most rapid Ni oxidation takes place between 300 and 700 °C. Using Ni oxidation state as the proxy for the phase transformation, the buildup of heterogenous phase propagation in the early stage of calcination is shown, especially along the radial direction of secondary particles. Furthermore, the radial heterogenous phase distribution gradually decreases upon completing the calcination. However, a high degree of mosaic-like heterogeneity may still be present in the final product, departing from the perfect layered oxide. Overall, the present study offers fundamental insights into manipulating multiscale materials properties during calcination for obtaining stable, high-energy layered oxide cathodes.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Materials Engineering of Violin Soundboards by Stradivari and Guarneri

Abstract We investigated the material properties of Cremonese soundboards using a wide range of spectroscopic, microscopic, and chemical techniques. We found similar types of spruce in Cremonese soundboards as in modern instruments, but Cremonese spruces exhibit unnatural elemental compositions and oxidation patterns that suggest artificial manipulation. Combining analytical data and historical information, we may deduce the minerals being added and their potential functions—borax and metal sulfates for fungal suppression, table salt for moisture control, alum for molecular crosslinking, and potash or quicklime for alkaline treatment. The overall purpose may have been wood preservation or acoustic tuning. Hemicellulose fragmentation and altered cellulose nanostructures are observed in heavily treated Stradivari specimens, which show diminished second‐harmonic generation signals. Guarneri's practice of crosslinking wood fibers via aluminum coordination may also affect mechanical and acoustic properties. Our data suggest that old masters undertook materials engineering experiments to produce soundboards with unique properties.

Su, Cheng‐Kuan↗

DOE OSTI2021

Materials Engineering of Violin Soundboards by Stradivari and Guarneri

36 MATERIALS SCIENCE↗

DOE OSTI2026

Hole Transfer to Carbazole Derivatives: Untold Story of “Self-Assembled Monolayers” Employed in “Halide Perovskite Solar Cells”

Carbazole derivatives, such as MeO-2PACz and 2PACz are known to improve the performance of halide perovskite solar cells by facilitating hole transfer. To assess their interaction with halide perovskites, this work probes the hole transfer from excited CsPbBr3 quantum dots to MeO-2PACz and 2PACz using emission spectroscopic and transient absorption techniques. The different oxidation potentials of these two carbazoles result in divergent interactions with CsPbBr 3 QDs. Whereas MeO-2PACz quenches the emission of CsPbBr 3 QDs, 2PACz enhances the emission by remediating the surface traps. Transient absorption studies confirm the formation of MeO-2PACz +• cation radical with characteristic absorption in the near IR region. No such oxidation process was observed with 2PACz. The mechanistic insights into the interaction of the two carbazole derivatives with excited perovskite nanocrystals will add another piece to the untold story behind the improved performance of perovskite photovoltaic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Disordered TiO x –SiO x Nanocatalysts Using Bioinspired Synthetic Routes

Metal oxide nanomaterials have increasing significance and broad applications in catalysis, ranging from support materials to active catalysts. Here, we have demonstrated a facile synthetic strategy to create disordered, high-surface-area metal oxide nanomaterials using biomineralization-inspired methods. Using protamine as a protein template, a range of TiO x –SiO x nanomaterials were synthesized and implemented for catalytic CO 2 thermal reduction reactions. The modularity of synthetic options afforded via biomineralization enables increases in surface area, which are ideally suited for subsequent modification to regulate catalytic performance. All materials were thoroughly characterized using a suite of synchrotron scattering and spectroscopic methods. Through these techniques, we have demonstrated that protamine-induced biomineralization results in largely disordered materials with changes in the local atomic structure dependent on the applied synthetic conditions. Protamine removal with treatment under acidic conditions greatly increased material surface area while causing measurable changes in the structure as revealed by X-ray absorption spectroscopy. Upon subsequent hydrogenation, Ti- and Si-based defects were induced in the materials while the disordered nature of the material was still largely retained. Furthermore, we found that the incorporation of Si into TiO x was able to mitigate the known anatase to rutile phase change during the reaction while stabilizing the defect sites. The synthetic strategies described in this work are expected to be translatable to other metal oxide nanomaterial chemical structures, providing a means to control catalytic properties using benign synthetic strategies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Photocatalytic Ammonia Synthesis using Fe-Based MOFs: The Role of Ligand Functionalization

Photocatalytic ammonia (NH 3 ) synthesis offers a carbon-neutral alternative to the Haber−Bosch process, which generates 42 million metric tons of CO 2 equivalent emissions annually. However, solar-to-ammonia conversion with contemporary photocatalysts remains far from practical requirements, and understanding the limiting factors in systems with well-defined active sites is crucial. Here, we show how the μ 3 -oxo-centered trinuclear Fe cluster in MIL-101(Fe) functions as the catalytic motif for N 2 -to-NH 3 conversion through combined experimental and computational investigations. Comparative studies with a molecular analogue demonstrate that the cluster is stabilized within the MOF framework, sustaining redox cycling and maintaining high catalytic activity. We systematically functionalized the dicarboxylate ligands of MIL-101(Fe) with −NH 2 , −Br, −NO 2 , −F, and −CF 3 to probe how ligand chemistry modulates Fe electron density, N 2 adsorption capacity, and proton availability, correlating these properties with catalytic performance using spectroscopic and surface characterization techniques alongside timeresolved infrared to assess excited-state lifetimes. F-functionalization optimally balances N 2 activation, proton availability at Fe active sites, and excited-state lifetimes, boosting NH 3 production by ∼ 60% relative to unmodified MIL-101(Fe). This study of ligandfunctionalized MIL-101(Fe) MOFs uncovers the underlying structure-activity relationships and advances design principles for solardriven NH 3 synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Decoupling the catalytic and degradation mechanisms of cobalt active sites during acidic water oxidation

Advancement of iridium-free catalysts for the low-pH oxygen evolution reaction (OER) is required to enable multi-gigawatt-scale proton-exchange water electrolysis. Cobalt-based materials might address this requirement, but little is known about the mechanism of operation of these OER catalysts at low pH. Here we investigate the nature and evolution of the active cobalt sites along with charge- and mass-transfer processes that support their catalytic function within a cobalt–iron–lead oxide material using in situ spectroscopic, gravimetric and electrochemical techniques. We demonstrate that corrosion of the cobalt sites and their reformation through electrooxidation of dissolved Co 2+ do not affect the catalytic mechanism and are decoupled from the OER. The OER-coupled charge transfer is supported by Co (3+δ)+ -oxo-species, which are structurally different from those reported for alkaline/near-neutral conditions and are formed on a relatively slow timescale of minutes. These mechanistic insights might assist in developing genuinely practical catalysts for this vital technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Assessing the sources of reionization: a spectroscopic case study of a 30× lensed galaxy at z ~ 5 with Ly α , C IV, Mg ιι, and [Ne ιιι]

We present a detailed spectroscopic analysis of a galaxy at z ≃ 4.88 that is, by chance, magnified ~30× by gravitational lensing. Only three sources at z ≳ 5 are known with such high magnification. This particular source has been shown to exhibit widespread, high equivalent width ${{\rm C\, \small {IV}}}\ \lambda 1549\, \mathring{\rm A}$ emission, implying it is a unique example of a metal-poor galaxy with a hard radiation field, likely representing the galaxy population responsible for cosmic reionization. Using ultraviolet (UV) nebular line ratio diagnostics, Very Large Telescope (VLT)/X-shooter observations rule out strong active galactic nuclei (AGN) activity, indicating a stellar origin of the hard radiation field instead. We present a new detection of ${[{\rm Ne\, \small {III}}]}\ \lambda 3870\, \mathring{\rm A}$ and use the [${\rm Ne\, \small {III}}$]/[${\rm O\, \small {II}}$] line ratio to constrain the ionization parameter and gas-phase metallicity. Closely related to the commonly used [${\rm O\, \small {III}}$]/[${\rm O\, \small {II}}$] ratio, our [${\rm Ne\, \small {III}}$]/[${\rm O\, \small {II}}$] measurement shows this source is similar to local ‘Green Pea’ galaxies and Lyman-continuum leakers. It furthermore suggests this galaxy is more metal poor than expected from the fundamental metallicity relation, possibly as a consequence of excess gas accretion diluting the metallicity. Finally, we present the highest redshift detection of ${{\rm Mg\, \small {II}}}\ \lambda 2796\, \mathring{\rm A}$, observed at high equivalent width in emission, in contrast to more evolved systems predominantly exhibiting ${\rm Mg\, \small {II}}$ absorption. Strong ${\rm Mg\, \small {II}}$ emission has been observed in most z ~ 0 Lyman-continuum leakers known and has recently been proposed as an indirect tracer of escaping ionizing radiation. In conclusion, this strongly lensed galaxy, observed just $300\, \mathrm{Myr}$ after reionization ends, enables testing of observational diagnostics proposed to constrain the physical properties of distant galaxies in the James Webb Space Telescope (JWST)/Extremely Large Telescope (ELT) era.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2022

On the inconsistency of [C/Fe] abundances and the fractions of carbon-enhanced metal-poor stars among various stellar surveys

Carbon-enhanced metal-poor (CEMP) stars are a unique resource for Galactic archaeology because they probe the properties of the First Stars, early chemical evolution, and binary interactions at very low metallicity. Comparing the fractions and properties of CEMP stars in different Galactic environments can provide us with unique insights into the formation and evolution of the Milky Way halo and its building blocks. In this work, we investigate whether directly comparing fractions of CEMP stars from different literature samples of very metal-poor [Fe/H] < -2.0 stars is valid. We compiled published CEMP fractions and samples of Galactic halo stars from the past 25 years, and find that they are not all consistent with each other. Focusing on giant stars, we find significant differences between various surveys when comparing their trends of [Fe/H] versus [C/Fe] and their distributions of CEMP stars. To test the role of the analysis pipelines for low-resolution spectroscopic samples, we re-analysed giant stars from various surveys with the sspp and ferre pipelines. We found systematic differences in [C/Fe] of ~0.1-0.4 dex, partly independent of degeneracies with the stellar atmospheric parameters. These systematics are likely due to the different pipeline approaches, different assumptions in the employed synthetic grids, and/or the comparison of different evolutionary phases. We conclude that current biases in (the analysis of) very metal-poor samples limit the conclusions one can draw from comparing different surveys. We provide some recommendations and suggestions that will hopefully aid the community to unlock the full potential of CEMP stars for Galactic archaeology.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2022

Magnetic-Core/Gold-Shell Nanoparticles for the Detection of Hydrophobic Chemical Contaminants

Magnetic-core/gold-shell nanoparticles (MAuNPs) are of interest for enabling rapid and portable detection of trace adulterants in complex media. Gold coating provides biocompatibility and facile functionalization, and a magnetic core affords analyte concentration and controlled deposition onto substrates for surface-enhanced Raman spectroscopy. Iron oxide cores were synthesized and coated with gold by reduction of HAuCl4 by NH2OH. MAuNPs were grafted with polyethylene glycol (PEG) and/or functionalized with 4-mercaptobenzoic acid (4-MBA) and examined using a variety of microscopic, spectroscopic, magnetometric, and scattering techniques. For MAuNPs grafted with both PEG and 4-MBA, the order in which they were grafted impacted not only the graft density of the individual ligands, but also the overall graft density. Significant Raman signal enhancement of the model analyte, 4-MBA, was observed. This enhancement demonstrates the functionality of MAuNPs in direct detection of trace contaminants. The magnetic deposition rate of MAuNPs in chloroform and water was explored. The presence of 4-MBA slowed the mass deposition rate, and it was postulated that the rate disparity originated from differing NP-substrate surface interactions. These findings emphasize the importance of ligand choice in reference to the medium, target analyte, and substrate material, as well as functionalization procedure in the design of similar sensing platforms.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Characterization of Polyhydroxybutyrate-Based Composites Prepared by Injection Molding

The waste generated by single-use plastics is often non-recyclable and non-biodegradable, inevitably ending up in our landfills, ecosystems, and food chain. Through the introduction of biodegradable polymers as substitutes for common plastics, we can decrease our impact on the planet. In this study, we evaluate the changes in mechanical and thermal properties of polyhydroxybutyrate-based composites with various additives: Microspheres, carbon fibers or polyethylene glycol (2000, 10,000, and 20,000 MW). The mixtures were injection molded using an in-house mold attached to a commercial extruder. The resulting samples were characterized using microscopy and a series of spectroscopic, thermal, and mechanical techniques. We have shown that the addition of carbon fibers and microspheres had minimal impact on thermal stability, whereas polyethylene glycol showed slight improvements at higher molecular weights. All of the composite samples showed a decrease in hardness and compressibility. The findings described in this study will improve our understanding of polyhydroxybutyrate-based composites prepared by injection molding, enabling advancements in integrating biodegradable plastics into everyday products.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Defect Characterization of Monocrystalline Silicon Solar Cells with Polysilicon Passivated Contact Using Electrically-Detected Magnetic Resonance (EDMR) Spectroscopy

As the c-Si based solar cell efficiencies are approaching over 26%, it is becoming critical to characterize the low concentrations of the defects – as low as 10^10-10^11 cm-3 (for e.g., iron contamination in high-lifetime Ga-doped wafers3 and n-type wafers), and further reduce them. Also, atomistic level understanding of the mechanisms of the low concentration process-induced-defects and reliability limiting defects (such as light and elevated temperature induced degradation, surface passivation degradation) is needed to design the mitigation strategies. The conventional characterization techniques are limited due to their detection limitations. Some of the techniques based on lifetime spectroscopies can still be used for low concentration characterization however, they are based on estimations and theoretical models and hence, indirect and cannot fully reveal information about the microscopic mechanism of the defects. Thus, we present the application of an ultrasensitive magnetic resonance-based technique for the direct spectroscopic detection of the defects in Si PV - electrically detected magnetic resonance (EDMR). In this work, we aim to focus on establishing a process flow for fabrication of minicells with (miniature replica of the larger-area cells) and setting up the routine for EDMR measurements on them with the EDMR instrumentation capability at NREL. For the EDMR measurements, sample size is limited by the dimensions of sample holder tube (width less than 3.2 mm, active area - 20 mm). Thus, we have designed c-Si based minicells with polysilicon (poly-Si) passivated contacts same as the larger-area cells that we fabricate in our group at NREL. We also modified our minicell process flow for fabricating the textured minicells for preserving the texture during processing and taking care of the laser-ablation edge damage which can significantly affect the performance of such small devices. We have achieved comparable performance on these newly fabricated minicells as that of our 4 cm2 devices with same structure (comparable VOC, JSC, FF). We also conducted EDMR measurements on the minicells and observed a distinct EDMR signal at g-value ~2.005 at temperatures 30K and above, as shown in Fig. 2. We associate this signal to the presence of silicon dangling bonds based on the g-value. We also observed an EDMR signal at g-value ~1.998 at temperature ~5K. The origin of this signal is still being investigated. Thus, we show the proof of concept of minicells and EDMR measurements with which we now aim to study some of the unknown defects in silicon solar cell devices.

EDMR↗

DOE OSTI2024

Combining Spectroscopic and Imaging Galaxy Surveys for Improved Measurements of Large-Scale Structure

Galaxy imaging surveys represent a promising opportunity for testing cosmological models but suffer from significant challenges associated with galaxy redshift uncertainty. I present improved techniques for the use of spectroscopic redshifts for measurements of large-scale structure with galaxy imaging surveys. I additionally present the results of the application of these techniques to data from the Sloan Digital Sky Survey (SDSS) and the Dark Energy Survey (DES). The results of my work are photometric redshift measurements of the approximately 100 million galaxies comprising the the DES Year 3 Weak Lensing Source Galaxy Catalog, constraints on parameters of the Lambda-CDM cosmological model based on the gravitational lensing and clustering of the DES Year 3 source and lens galaxy catalogs, an algorithm for propagating uncertainties measured in simulations to analogous measurements on data, and measurements of the incidence of projection effects in optically detected clusters of galaxies. I argue that continued development of the methods I have worked on is a promising path toward a conclusive test of Lambda-CDM with galaxy surveys.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2024

Dark Energy Survey Deep Field photometric redshift performance and training incompleteness assessment

Context. The determination of accurate photometric redshifts (photo-zs) in large imaging galaxy surveys is key for cosmological studies. One of the most common approaches are machine learning techniques. These methods require a spectroscopic or reference sample to train the algorithms. Attention has to be paid to the quality and properties of these samples since they are key factors in the estimation of reliable photo-zs. Aims. The goal of this work is to calculate the photo-zs for the Y3 DES Deep Fields catalogue using the DNF machine learning algorithm. Moreover, we want to develop techniques to assess the incompleteness of the training sample and metrics to study how incompleteness affects the quality of photometric redshifts. Finally, we are interested in comparing the performance obtained with respect to the EAzY template fitting approach on Y3 DES Deep Fields catalogue. Methods. We have emulated -- at brighter magnitude -- the training incompleteness with a spectroscopic sample whose redshifts are known to have a measurable view of the problem. We have used a principal component analysis to graphically assess incompleteness and to relate it with the performance parameters provided by DNF. Finally, we have applied the results about the incompleteness to the photo-z computation on Y3 DES Deep Fields with DNF and estimated its performance. Results. The photo-zs for the galaxies on DES Deep Fields have been computed with the DNF algorithm and added to the Y3 DES Deep Fields catalogue. They are available at https://des.ncsa.illinois.edu/releases/y3a2/Y3deepfields. Some techniques have been developed to evaluate the performance in the absence of "true" redshift and to assess completeness. We have studied... (Partial abstract)

79 ASTRONOMY AND ASTROPHYSICS↗