SEARCH · Engineering Papers

Results for “spectral density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

All sources NASA NTRS DOE OSTI

NASA NTRS1977

Response of periodic beam to supersonic boundary-layer pressure fluctuations

The response of a periodic beam (modeling a periodic fuselage) to supersonic boundary-layer pressure fluctuations is analyzed on the basis of a scheme in which a decaying turbulence is treated as a superposition of frozen-pattern components, thus allowing the structural response to be similarly superposed and the advantage of frozen-pattern analysis to be maximally utilized. The fundamental solution required for the construction of the total response is one corresponding to the excitation of a frozen-pattern sinusoid. To obtain this fundamental solution, the formulation follows Mead's wave-propagation method (1971), but also takes into account the effect of freestream velocity on the same side of the turbulence excitation and the effect of a cavity on the opposite side of the excitation. As a numerical example, the spectral density of the structural response is computed and the results are compared with experimental data.

Lin, Y. K.↗

NASA NTRS1978

Statistical formulation of one-dimensional electron fluid turbulence

A one-dimensional electron fluid model is investigated using the mathematical methods of modern fluid turbulence theory. Nondissipative equilibrium canonical distributions are determined in a phase space whose coordinates are the real and imaginary parts of the Fourier coefficients for the field variables. Spectral densities are calculated, yielding a wavenumber electric field energy spectrum proportional to 1/k squared for large wavenumbers. The equations of motion are numerically integrated and the resulting spectra are found to compare well with the theoretical predictions.

Fyfe, D.↗

NASA NTRS1978

A Fourier approach to cloud motion estimation

A Fourier phase-difference technique for cloud motion estimation from pairs of pictures is described, and results obtained using this technique are compared with the results of a Fourier-domain cross-correlation scheme. The phase-difference technique makes use of the phase of the cross-spectral density and allows motion estimates to be made for individual spatial frequencies, which are related to cloud pattern dimensions. When objects being tracked do not change their shape, size, and orientation to more than a limited degree, both techniques are effective. The phase difference technique is relatively sensitive to the presence of mixtures of motions, changes in cloud shape, and edge effects; in these circumstances, the cross-correlation scheme is preferable. It is suggested that the Fourier transform phase difference estimation methods can be applied in problems such as landmark matching.

Arking, A.↗

NASA NTRS1978

Whistler mode noise in Jupiter's inner magnetosphere

A study is made of the amplitude and spectral extent of whistler mode noise in the inner magnetosphere of Jupiter. It is found that the 'hat-shaped' pitch angle distributions of energetic electrons (21 and 31 MeV at L=3) are consistent with those predicted in the presence of a band-limited spectrum of whistler mode noise. The equatorial maximum linear growth rate of parallel propagating whistlers are consistent with those necessary to limit the energetic electron intensities by the whistler mode instability. It is noted that the wave phase speeds before wave reflection can occur at high latitudes and that wave growth is limited to a disk-like region centered around the magnetic equator. The frequency extent of the whistler mode noise spectrum may be estimated by the range of frequencies maximally unstable to equatorial linear growth. A value is found for the spectral density of the broadband whistler mode noise necessary to balance radial diffusion of energetic electrons above the critical range, and an expression is derived for the energetic electron system response to fluctuations about the limiting flux value.

Sentman, D. D.↗

NASA NTRS1978

Experimental clean combustor program: Phase 3: Turbulence measurement addendum

Airflow turbulence parameters were measured in the high pressure, high temperature flow stream leaving the compressor of an operating gas turbine engine. A water cooled hot film turbulence probe was used to determine the turbulence intensity and length scale in the compressor exit flow stream of the CF6-50 engine. Data were obtained only at idle operating conditions. At engine power levels above idle conditions, durability problems and erratic data readings were encountered with the turbulence measurement probes. Turbulence measurements were made at three radial immersions at a point 15.5 cm downstream of the compressor outlet guide vanes in the compressor exit diffuser. The passage height at this point is 5.54 cm. Data reduction was accomplished with a time-data fast Fourier transform (FFT) system. This system finds the power spectral density distribution (PSD) of a large number of data samples using a direct Fourier transform algorithm and finds the autocorrelation parameter for these data by doing an FFT analysis of the PSD curves for a series of time delay intervals.

Taylor, J. R.↗

NASA NTRS1979

Field measurement of penetrator seismic coupling in sediments and volcanic rocks

Field experiments were conducted to determine experimentally how well a seismometer installed using a penetrator would be coupled to the ground. A dry lake bed and a lava bed were chosen as test sites to represent geological environments of two widely different material properties. At each site, two half-scale penetrators were fired into the ground, a three-component geophone assembly was mounted to the aft end of each penetrator, and dummy penetrators were fired at various distances to generate seismic signals. The recorded signals were digitized, and cross-spectral analyses were performed to compare the observed signals in terms of power spectral density ratio, coherence and phase difference. The analyses indicate that seismometers deployed by penetrators will be as well coupled to the ground as are seismometers installed by conventional methods for the frequency range of interest in earthquake seismology, although some minor differences were observed at frequencies near the upper limit of the frequency band.

Nakamura, Y.↗

NASA NTRS1979

Investigation of surface fluctuating pressures on a 1/4 scale YC-14 upper surface blown flap model

Fluctuating pressures were measured at 30 positions on the surface of a 1/4-scale YC-14 wing and fuselage model during an outdoor static testing program. These data were obtained as part of a NASA program to study the fluctuating loads imposed on STOL aircraft configurations and to further the understanding of the scaling laws of unsteady surface pressure fields. Fluctuating pressure data were recorded at several discrete engine thrust settings for each of 16 configurations of the model. These data were reduced using the technique of random data analysis to obtain auto-and cross-spectral density functions and coherence functions for frequencies from 0 to 10 kHz, and cross-correlation functions for time delays from 0 to 10.24 ms. Results of this program provide the following items of particular interest: (1) Good collapse of normalized PSD functions on the USB flap was found using a technique applied by Lilley and Hodgson to data from a laboratory wall-jet apparatus. (2) Results indicate that the fluctuating pressure loading on surfaces washed by the jet exhaust flow was dominated by hydrodynamic pressure variations, loading on surface well outside the flow region dominated by acoustic pressure variations, and loading near the flow boundaries from a mixture of the two.

Pappa, R. S.↗

NASA NTRS1977

Turbulence simulation mechanization for Space Shuttle Orbiter dynamics and control studies

The current version of the NASA turbulent simulation model in the form of a digital computer program, TBMOD, is described. The logic of the program is discussed and all inputs and outputs are defined. An alternate method of shear simulation suitable for incorporation into the model is presented. The simulation is based on a von Karman spectrum and the assumption of isotropy. The resulting spectral density functions for the shear model are included.

Tatom, F. B.↗

NASA NTRS1979

Field Measurements of Penetrator Seismic Coupling in Sediments and Volcanic Rocks

Field experiments were conducted to determine how well a seismometer installed using a penetrator would be coupled to the ground. A dry-lake bed and a lava bed were chosen as test sites to represent geological environments of two widely different material properties. At each site, two half-scale penetrators were fired into the ground, a three-component geophone assembly was mounted to the aft end of each penetrator, and dummy penetrators were at various distances to generate seismic signals. These signals were detected by the penetrator-mounted geophone assembly and by a reference geophone assembly buried or anchored to surface rock and 1-m from the penetrator. The recorded signals were digitized, and cross-spectral analyses were performed to compare the observed signals in terms of power spectral density ratio, coherence, and phase difference. The analyses indicate that seismometers deployed by penetrators will be as well coupled to the ground as are seismometers installed by conventional methods for the frequency range of interest in earthquake seismology.

Nakamura, Y.↗

NASA NTRS1979

Turbulence measurements in the compressor exit flow of a General Electric CF6-50 engine

Ruggedized cooled film probes were used to measure CF6-50 compressor exit turbulence properties at three different engine idle condition test points. The turbulence probe was coupled to a constant temperature anemometer and signal conditioning system. An on-line readout system connected to the anemometer was used to check the data as it was acquired. At engine idle conditions, the turbulence intensity ranged from 4.8 percent to 5.6 percent and the length scale ranged from 5.64 cm to 6.95 cm. The length scale values are somewhat larger than the passage height at the measurement plane (5.54 cm), which indicates that the shape of the turbulent eddies are elongated in the axial direction. The microscale values range from about 0.73 cm to about 0.98 cm. Power spectral density distributions show that a large proportion of the turbulent energy at the measurement plane is concentrated at frequencies below one kilohertz.

Taylor, J. R.↗

NASA NTRS1979

A comparison of simulated and experimental wave spectra in the nearshore region

The results of comparing the experimental spectra measured over the shelf with spectra measured in deepwater conditions indicated that statistically significant changes occurred over the shelf region that could be attributed to shoaling and refraction effects. The comparison of the simulated spectra with the experimental agreed well at the 80% confidence level for all but the most inshore data segment. The total energy also showed similar agreement. However, the theoretical frequency at which peak spectral density occurred did not follow the decreasing trend seen in the experimental data. Guidelines are proposed for determining the type wavefield to which the modeling technique can best be applied, and caution is given on the selection of the digitization rate necessary to ensure sufficient detail for analysis of wave data.

Morris, W. D.↗

NASA NTRS1979

Operator performance and localized muscle fatigue in a simulated space vehicle control task

Fourier transforms in a special purpose computer were utilized to obtain power spectral density functions from electromyograms of the biceps brachii, triceps brachii, brachioradialis, flexor carpi ulnaris, brachialis, and pronator teres in eight subjects performing isometric tracking tasks in two directions utilizing a prototype spacecraft rotational hand controller. Analysis of these spectra in general purpose computers aided in defining muscles involved in performing the task, and yielded a derived measure potentially useful in predicting task termination. The triceps was the only muscle to show significant differences in all possible tests for simple effects in both tasks and, overall, was the most consistently involved of the six muscles. The total power monitored for triceps, biceps, and brachialis dropped to minimal levels across all subjects earlier than for other muscles. However, smaller variances existed for the biceps, brachioradialis, brachialis, and flexor carpi ulnaris muscles and could provide longer predictive times due to smaller standard deviations for a greater population range.

Lewis, J. L., Jr.↗

NASA NTRS1979

A model for the noise radiated by turbulent boundary layers and its interaction with laminar layers in supersonic flow

Motivated by the noise-boundary layer transition problem in supersonic flow, the interaction between incoming aerodynamic noise and the laminar boundary layer was studied. The noise field was modeled as a Mach wave radiation field consisting of discrete waves emanating from coherent turbulent entities moving downstream within the supersonic turbulent boundary layer. The individual disturbances are likened to miniature sonic booms and the laminar boundary layer is strafed by the waves as the sources move downstream. The mean, autocorrelation, and power spectral density of the field are expressed in terms of the wave shapes and their average arrival rates. The emphasis in the interaction analysis is on the behavior of the shocklets in the noise field. The shocklets are shown to be focused by the laminar boundary layer in its outer region. Borrowing wave-propagation terminology, this region is termed the caustic region. Using scaling laws from sonic boom work, focus factors at the caustic are estimated to vary from 2 to 6 for incoming shocklet strengths of 1 to .01 percent of the free stream pressure level. The situation regarding experimental evidence of the caustic region is reviewed. It is not clear whether the focusing effectively promotes early transition. Additional observations concerning the interaction problem are presented.

Schopper, M. R.↗

NASA NTRS1979

Spectral characteristics of convolutionally coded digital signals

The power spectral density of the output symbol sequence of a convolutional encoder is computed for two different input symbol stream source models, namely, an NRZ signaling format and a first order Markov source. In the former, the two signaling states of the binary waveform are not necessarily assumed to occur with equal probability. The effects of alternate symbol inversion on this spectrum are also considered. The mathematical results are illustrated with many examples corresponding to optimal performance codes.

Divsalar, D.↗

NASA NTRS1978

Analysis techniques for two-dimensional infrared data

In order to evaluate infrared detection and remote sensing systems, it is necessary to know the characteristics of the observational environment. For both scanning and staring sensors, the spatial characteristics of the background may be more of a limitation to the performance of a remote sensor than system noise. This limitation is the so-called spatial clutter limit and may be important for systems design of many earth application and surveillance sensors. The data used in this study is two dimensional radiometric data obtained as part of the continuing NASA remote sensing programs. Typical data sources are the Landsat multi-spectral scanner (1.1 micrometers), the airborne heat capacity mapping radiometer (10.5 - 12.5 micrometers) and various infrared data sets acquired by low altitude aircraft. Techniques used for the statistical analysis of one dimensional infrared data, such as power spectral density (PSD), exceedance statistics, etc. are investigated for two dimensional applicability. Also treated are two dimensional extensions of these techniques (2D PSD, etc.), and special techniques developed for the analysis of 2D data.

Winter, E. M.↗

NASA NTRS1979

Magnetosheath electrostatic turbulence

The spectrum of electrostatic wave turbulence in the terrestrial magnetosheath is investigated. Measurements of electric and magnetic field fluctuations in the range 20 Hz to 200 kHz were made by two 16-channel spectrum analyzers on board the IMP 6 satellite. It is found that the electrostatic wave spectra generally consist of three components, which may occur in any combination: a low frequency component which shows a decrease in spectral density with increasing frequency and which is associated with the bow shock wave, a high frequency component identified with electron plasma oscillations and an intermediate frequency component. The minimum wavelength of electrostatic waves is found to be about 0.1 km, with intensity of from 0.01 to 1.0 mV/m. Electric field polarization has been found to be parallel to the local magnetic field direction, implying the presence of longitudinal electrostatic wave modes, electron plasma oscillations and ion sound waves.

Rodriguez, P.↗

NASA NTRS1979

Peak Strouhal frequency of subsonic jet noise as a function of Reynolds number

The narrowband spectral characteristics of the acoustic field generated by subsonic jets at low Reynolds numbers were studied in terms of a dimensionless power spectral density. It was found that the variation of the sound magnitude of the spectrum is an increasing function of the Reynolds number. The maximum level of the spectrum is not a linear function of the Reynolds number. The spectra are insensitive to Reynolds number above a critical value of about 100,000. Up to Reynolds number of this magnitude, the peak Strouhal frequency observed at 30 deg emission angle is identical with that at 90 deg for any exit Mach number. At higher Reynolds number the peak Strouhal number increases with increasing emission angle. The peak Strouhal number was found to be about 0.2, which is in agreement with previous findings that a few discrete modes at a Strouhal number of around 0.2 in low Reynolds number supersonic jets are powerful noise generators.

Yamamoto, K.↗

NASA NTRS1979

Quasi-periodic structure of a turbulent jet

The instantaneous near field pressure fluctuations of an axisymmetric subsonic jet were measured by using a longitudinal and an azimuthal microphone arrays in order to qualitatively determine the behaviors of the quasi-periodic structure within the flow. Statistical analysis is used to explain the characteristic of the pressure signals. In addition to the information obtained by forming the power spectral density, auto- and cross-correlation functions, two types of signals are extracted through a conditional probability analysis to represent the quasi-periodic and the random fine structures within the turbulent jet. The quasi-periodic structure first appears as a rolling up of the mixing layer flow within one nozzle diameter downstream of the exit, then becomes fully developed at approximately 3 nozzle diameters downstream with a preferred Strouhal number range 0.3-0.4, and finally disappears beyond the end of potential core. This behavior is also reflected in the variation of the convection velocity.

Maestrello, L.↗