Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “prototype”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Cumulus: NASA's Cloud Based Distributed Active Archive Center Prototype

NASAs Earth Science Data System (ESDS) Program serves as a central cog in order to facilitate the implementation of NASA's Earth Science strategic plan. Since 1994, the ESDS Program has committed to the full and open sharing of Earth science data obtained from NASA instruments to all users. One of the key responsibilities of the ESDS Program is to continuously evolve the entire data and information system to maximize returns on the collected NASA data. An independent review was conducted in 2015 to holistically review the EOSDIS in order to identify gaps. The review recommendations were to investigate two areas: one, whether commercial cloud providers offer potential for storage, processing, and operational efficiencies, and two, the potential development of new data access and analysis paradigms. In response, ESDS has initiated several prototypes investigating the advantages and risks of leveraging cloud computing. This paper describes one such prototyping activity named Cumulus. Cumulus is being designed and developed as a "native" cloud-based data ingest, archive and management system that can be used for all future NASA Earth science data streams. Cumulus will foster design of new analysisvisualization tools that can leverage collocated data from all of the distributed DAACs as well as elastic cloud computing resources.

Earth Science Informatics↗
NASA NTRS2018

Sixty Earth-Days Test of a Prototype Pt/HTCC Alumina Package in Simulated Venus Environment

This paper presents experimental results of a prototype high temperature co-fired ceramic (HTCC) package with Au/Pt metallization in a three-phase harsh environment test that culminated with 60-day demonstration in simulated Venus surface environment of 465 degC with corrosive atmosphere at 90 bar pressure. The prototype package is based on previously developed and reported HTCC package successfully tested with multiple analog and digital silicon carbide (SiC) high temperatures semiconductor integrated circuits (ICs) at NASA Glenn Research Center in 500 degC Earth air ambient for over ten thousands hours, and short-term tested at temperatures above 800 degC. The three-phase harsh environment test started with 48 hours in 465 degC Earth air, followed by 48 hours in 465 degC nitrogen at 90 bar pressure and 1400 hours in simulated Venus surface environment of 465 degC with corrosive atmosphere at 90 bar. Initial analytical results of the package materials and surfaces after exposure to Venus environment are discussed to assess the stability of the packaging materials in the tested environments. The test in simulated Venus environment was implemented in the NASA Glenn Extreme Environment Rig (GEER). The results of this study suggest that an effective encapsulation of areas of surface metallization and vicinities may help to improve electrical performance of a HTCC alumina packaging system in Venus environment.

Chen, Liangyu↗
NASA NTRS2018

Sixty Earth-Days Test of a Prototype Pt/HTCC Alumina Package in Simulated Venus Environment

This paper presents experimental results of a prototype high temperature co-fired ceramic (HTCC) package with Au/Pt metallization in a three-phase harsh environment test that culminated with 60-day demonstration in simulated Venus surface environment of 465 degrees Centigrade with corrosive atmosphere at 90 bars pressure. The prototype package is based on a previously developed and reported HTCC package successfully tested with multiple analog and digital silicon carbide (SiC) high temperatures semiconductor integrated circuits (ICs) at NASA Glenn Research Center in 500 degrees Centigrade Earth air ambient for over ten thousand hours, and short-term tested at temperatures above 800 degrees Centigrade. The three-phase harsh environment test started with 48 hours in 465 degrees Centigrade Earth air, followed by 48 hours in 465 degrees Centigrade nitrogen at 90-bar pressure and 1400 hours in simulated Venus surface environment of 465 degrees Centigrade with corrosive atmosphere at 90 bars. Initial analytical results of the package materials and surfaces after exposure to the Venus environment are discussed to assess the stability of the packaging materials in the tested environments. The test in a simulated Venus environment was implemented in the NASA Glenn Extreme Environment Rig (GEER). The results of this study suggest that an effective encapsulation of areas of surface metallization and vicinities may help to improve electrical performance of a HTCC alumina packaging system in Venus environment.

Chen, Liang-Yu↗
NASA NTRS2017

From Prototype to Flight: Qualifying a Ka-Band Parabolic Deployable Antenna (KaPDA) for CubeSats

CubeSats have experienced a number of exciting technological advancements in the past several years. However, until recently, there has been very limited development in the area of high gain CubeSat antennas, which are critical for both high data rate communications and radar science. A Ka-band high gain antenna would provide a 10,000 times increase in data communication rates over an X-band patch antenna and a 100 times increase over state-of-the-art S-band parabolic antennas. Because of this, three years ago the Jet Propulsion Laboratory (JPL) initiated a research and technology development effort to advance CubeSat communication capabilities, with one of the key thrusts being the Ka-band parabolic deployable antenna (KaPDA). This antenna started with the ambitious goal of fitting a 42 dB, 0.5 meter, 35 Ghz antenna in a 1.5U (10 cm x 10 cm x 17 cm) canister. This paper discusses the process of taking the antenna from a first prototype to the flight design, which is flying on the RainCube mission, and earth science CubeSat. The prototype antenna was constructed in early 2015, and then upgraded to an engineering model at the end of 2016 to compensate for lessons learned. The flight version is currently under construction, and scheduled to be finished in 2016. KaPDA is the second deployable parabolic antenna to fly on a CubeSat, and the first of its kind to operate at Ka-band enabling a number of opportunities for high rate deep space antenna communications and radar science.

Sauder, Jonathan↗
NASA NTRS2017

From Prototype to Flight: Qualifying a Ka-Band Parabolic Deployable Antenna (KaPDA) for CubeSats

CubeSats have experienced a number of exciting technological advancements in the past several years. However, until recently, there has been very limited development in the area of high gain CubeSat antennas, which are critical for both high data rate communications and radar science. A Ka-band high gain antenna would provide a 10,000 times increase in data communication rates over an X-band patch antenna and a 100 times increase over state-of-the-art S-band parabolic antennas. Because of this, three years ago the Jet Propulsion Laboratory (JPL) initiated a research and technology development effort to advance CubeSat communication capabilities, with one of the key thrusts being the Ka-band parabolic deployable antenna (KaPDA). This antenna started with the ambitious goal of fitting a 42 dB, 0.5 meter, 35 Ghz antenna in a 1.5U canister. This paper discusses the process of taking the antenna from a first prototype to the flight design, how the design successfully met its goals, and lessons learned. A prototype antenna was constructed in early 2015, and then upgraded to an engineering model at the end of 2016. KaPDA will be flying on the RainCube mission, and earth science CubeSat. KaPDA is the second deployable parabolic antenna to fly on a CubeSat, and the first of its kind to operate at Ka-band enabling a number of opportunities for high rate deep space antenna communications and radar science.

Sauder, Jonathan↗
NASA NTRS2019

Machine Learning Prototype App For Recognition of Fruits

As the incidence of obesity and associated negative health consequences is rising, it becomes crucial to monitor the dietary choices of individuals. Unfortunately, traditional methods to collect this information involve collecting food frequency questionnaires from individuals using paper. Electronic food trackers have been developed to collect food data, but they require participants to manually label and describe the content of their meals, and which may be difficult for researchers to interpret in a standardized fashion. Machine learning, however, provides an easy and efficient method for both participants and researchers to label food items with standardized descriptions. This project aims to create a prototype phone application that can identify and label photos of apples. This is done by making a machine learning model through Turicreate, a python module, which is then implemented into an iOS app through Xcode and Swift. The modules used in Swift include CoreML and AVFoundation. This machine learning application will be incorporated with a MealLogger phone app that is also under development. The MealLogger app will be used to keep track of participants' calorie intake and other personal details throughout the sleep study. The machine learning model will present several potential identities of the foods found in the photo, and the user will only need to select the correct option. This will be a user-friendly method for participants to easily log their food consumption without the hard work of manually inputting each and every description. Some limitations to this project include the wide variety of food, including those within different cultures. To deal with this, the model will include the most generic food categories, which the participant may select, and produce a drop-down menu of more specific dishes under that specified category, with the option of self-input. Additional questionnaires may be implemented according to the food type selected This will allow the process to be quick and easy, but also specific for the purpose of analysis. The release of the application will require a much longer process, but the machine learning prototype presents a first step toward an application that may change data analysis for researchers interested in collecting food intake from individuals living in the real world.

Food tracker↗
NASA NTRS2019

Seeker 1.0: Prototype Robotic Free Flying Inspector Mission Overview

Seeker 1.0 is a prototype free flying robot that will one day be capable of inspecting human-rated spacecraft. Building off previous free flyer experience, this technology will eventually improve safety of human spacecraft by offering a variety of inspection capabilities for both routine and emergency scenarios providing increased capability and safety over current inspection methods. Seeker 1.0 is capable of 6 degree of freedom flight via a cold gas propulsion system and can operate up to 1 hour via a semi-autonomous guidance, navigation, and control system. The prototype spacecraft is capable of capturing still images at a variety of resolutions up to 13 MP. The initial test flight utilizes a command and data relay box called Kenobi. Kenobi is a derivative of the Seeker design and will communicate between Cygnus and Seeker and store data for post-mission downlink. Seeker and Kenobi have launched inside a NanoRacks External CubeSat Deployer (NRCSD-E) attached to the NG-11 Cygnus ISS resupply vehicle and will operate after Cygnus departs ISS and moves to a safe altitude. Operations will last approximately 30 minutes and will consist of basic vehicle maneuvers while capturing high-resolution still images. With any remaining time and propellant, Seeker will demonstrate additional safety capabilities and maneuvers required for operations around a crewed spacecraft. The Seeker project utilized the Class IE process that allows for streamlined flight hardware development and increased mission risk tolerance.

Spacecraft Inspection↗
NASA NTRS2020

Medical Data Architecture Prototype Development - Summary of Recent Work and Proposed Ideas for Upcoming Work

The Medical Data Architecture (MDA) project supports the Exploration Medical Capability (ExMC) risk to minimize or reduce the risk of adverse health outcomes and decrements in performance due to in-flight medical capabilities on human exploration missions. To mitigate this risk, the ExMC MDA project addresses the technical limitations identified in ExMC Gap Med 07: We do not have the capability to comprehensively process medically-relevant information to support medical operations during exploration missions, and in ExMC Gap Med 10: We do not have the capability to provide computed medical decision support during exploration missions. These gaps recognize the need for a comprehensive medical data management system and the accompanying computational support to provide autonomous medical care during long duration exploration missions. As the MDA matures—including the capability to comprehensively process and discover medically-relevant information to support medical operations during exploration missions—project focus will shift to maturing and extending the MDA platform to enable clinical decision support and real-time guidance. To date, the MDA foundational architecture has recommended exploration medical system Level of Care IV requirements through a series of test bed prototype developments and analog demonstrations. The next stage in the development will focus on more autonomous clinical decision making necessary to address challenges in executing a self-contained medical system that enables health care both with and without assistance from ground support. A thorough understanding of current state of medical decision support systems, advanced machine learning algorithms and vast and varied data sources is required. The development of a clinical decision support for exploration missions (Level of Care V) roadmap is needed: one that assesses of current state of the art of clinical decision support systems (CDSS), interoperability issues, identification of challenges in health and performance monitoring, obtaining and processing information from biosensors, knowledge and data management, data integration and fusion, and advanced algorithm development. This roadmap must also include rapid prototype development in the areas of data processing, advanced analysis and prediction of medical events, and treatment based on medically relevant information processing and evidence-based best practices. In this presentation, an overview of the relevant issues and the beginning framework of a Level of Care V CDSS development roadmap will be provided.

Krihak, M.↗
NASA NTRSDate not supplied

Standardizing Algorithm Documentation For Improved Scientific Data Understanding: The Algorithm Publication Tool Prototype

Algorithm Theoretical Basis Documents (ATBDs) are documents which accompany Earth observation data products generated from algorithms. While ATBDs are essential to scientific reproducibility, these key documents are not standardized and are often difficult to find. In this paper, we present the prototype Algorithm Publication Tool (APT), a cloud-based ATBD authoring and editing tool for NASA’s Earth science data systems. A standardized ATBD information model is also described as well as lessons learned from developing the prototype tool.

Kaylin Bugbee↗
NASA NTRS2002

Design and test of a prototype DART system

A 1.2-meter prototype Dual Anamorphic Reflector Telescope (DART) system has been build and tested. The key design feature of the telescope is a pair of membrane mirrors stretched to single curvature parabolic cylindrical sections. The parabolic figure of the mirrors is controlled by a pair of edge rails at two opposing ends of the membrane. The flexible edge rails are adjusted to parabolic to very high accuracy and can potentially be easily refigured on-orbit. The prototype telescope is lightweight and has demonstrated excellent optical performance for the farIR. The design is readily scalable to larger apertures and for operation at shorter wavelengths. Design and test results are discussed.

DART↗
NASA NTRS2001

Prototype maneuver decomposition algorith for genesis

This paper addresses a prototype of a maneuver decomposition algorithm developed by the Genesis Navigation Team at JPL. The algorithm described herein is an early prototype designed to support navigation analyses and to provide the basis for later development of operational software by the Spacecraft Team. The basis algorithm is applicable to any spin-stabilized spacecraft with axisymmetric thrusters.

Genesis↗
NASA NTRSDate not supplied

A Review of Extra-Terrestrial Regolith Excavation Concepts and Prototypes

Regolith is present on many extra-terrestrial bodies, and the crushed rock material it is made of contains many of the resources that are enabling for In-Situ Resource Utilization (ISRU). When extracted these resources can be used to provide consumables such as rocket propellant, human life support, working fluids and gases for industrial processes and feedstocks for manufacturing. In addition, the regolith can also be very beneficial for construction purposes as an aggregate which can be used for construction materials and shielding for radiation protection and micrometeorite impact. Binders for regolith concrete may also be made from geopolymers that may be in the regolith. The regolith can be melted and drawn out into glass fibers and used as reinforcements in a metal, polymer, or concrete matrix. In addition, there is tremendous scientific and geological knowledge that can only be obtained by studying samples of the regolith. However, none of these valuable activities can proceed without first acquiring the regolith granular material with some type of excavation device and method. Excavation is in the critical path of many workflows that will make up the capabilities required to establish a human and robotic presence in our solar system. While scientific in-situ sampling of regolith in small quantities has been achieved since the dawn of the space age in the 1960’s, large scale excavation for mining and construction on extra-terrestrial bodies has only been contemplated for many decades in works of scientific fact and also in fictional stories, but serious development and prototyping of excavation technologies for use in reduced gravity space environments was only started in the late 1990’s.This paper will review and document the evolution of extra-terrestrial excavation concepts and prototypes based on the available literature and the personal experience of the author who has been working on regolith excavation technology development since 1998.

ISRU↗
NASA NTRSDate not supplied

A Review of Extra-Terrestrial Regolith Excavation Concepts and Prototypes

Regolith is present on many extra-terrestrial bodies, and the crushed rock material it is made of contains many of the resources that are enabling for In-Situ Resource Utilization (ISRU). When extracted, these resources can be used to provide consumables such as rocket propellant, human life support, working fluids and gases for industrial processes and feedstocks for manufacturing. In addition, the regolith can also be very beneficial for construction purposes as an aggregate which can be used for construction materials and shielding for radiation protection and micrometeorite impact. Binders for regolith concrete may also be made from geopolymers that may be in the regolith. The regolith can be melted and drawn out into glass fibers and used as reinforcements in a metal, polymer, or concrete matrix. In addition, there is tremendous scientific and geological knowledge that can only be obtained by studying samples of the regolith. However, none of these valuable activities can proceed without first acquiring the regolith granular material with some type of excavation device and method. Excavation is in the critical path of many workflows that will make up the capabilities required to establish a human and robotic presence in our solar system. While scientific in-situ sampling of regolith in small quantities has been achieved since the dawn of the space age in the 1960’s, large scale excavation for mining and construction on extra-terrestrial bodies has only been contemplated, for many decades, but serious development and prototyping of excavation technologies for use in reduced gravity space environments was only started in the late 1990’s. This paper will review and document the evolution of extra-terrestrial excavation concepts and prototypes based on the available literature and the personal experience of the author who has been working on regolith excavation technology development since 1998.

Regolith↗
NASA NTRSDate not supplied

A Review of Extra-Terrestrial Regolith Excavation Concepts and Prototype

Regolith is present on many extra-terrestrial bodies, and the crushed rock material it is made of contains many of the resources that are enabling for In-Situ Resource Utilization (ISRU). When extracted, these resources can be used to provide consumables such as rocket propellant, human life support, working fluids and gases for industrial processes and feedstocks for manufacturing. In addition, the regolith can also be very beneficial for construction purposes as an aggregate which can be used for construction materials and shielding for radiation protection and micrometeorite impact. Binders for regolith concrete may also be made from geopolymers that may be in the regolith. The regolith can be melted and drawn out into glass fibers and used as reinforcements in a metal, polymer, or concrete matrix. In addition, there is tremendous scientific and geological knowledge that can only be obtained by studying samples of the regolith. However, none of these valuable activities can proceed without first acquiring the regolith granular material with some type of excavation device and method. Excavation is in the critical path of many workflows that will make up the capabilities required to establish a human and robotic presence in our solar system. While scientific in-situ sampling of regolith in small quantities has been achieved since the dawn of the space age in the 1960’s, large scale excavation for mining and construction on extra-terrestrial bodies has only been contemplated, for many decades, but serious development and prototyping of excavation technologies for use in reduced gravity space environments was only started in the late 1990’s. This paper will review and document the evolution of extra-terrestrial excavation concepts and prototypes based on the available literature and the personal experience of the author who has been working on regolith excavation technology development since 1998.

Regolith↗
NASA NTRSDate not supplied

Updates in Developing a Prototype Science Pipeline and Full-Volume, Global Hyperspectral Synthetic Data Sets for NASA’s Earth System Observatory’s Upcoming Surface, Biology and Geology Mission

The Surface Biology and Geology (SBG) mission recently passed mission confirmation review and has entered phase A – design and development. SBG will acquire high resolution solar-reflected spectroscopy and thermal infrared observations at a data rate of ~2.5 TB/day and generate products at ~40 TB/day. Given that the per-day volume is greater than NASA’s total extant airborne hyperspectral data collection, collecting, processing, disseminating, and exploiting the SBG data present new challenges. To meet these challenges, we have developed a prototype science pipeline and a full-volume global hyperspectral synthetic data set to help prepare for SBG’s flight (see poster GC42D-0730). Our science pipeline is based on the science processing technology developed for NASA’s Kepler and TESS planet-hunting missions. The pipeline infrastructure, Ziggy, provides a scalable architecture for robust, repeatable, and replicable science and application products that can be run on a range of systems from a laptop to the cloud or a supercomputer. Ziggy is compliant with NASA Procedural Requirement (NPR) 7150.2C, is at a technical readiness level (TRL) of 7 and has been released to github.com/nasa/ziggy. We integrated Ziggy with EO-1/Hyperion workflows to build a prototype pipeline and ingested the 17-year mission archive that provides globally sampled visible through shortwave infrared spectra that are representative of SBG data types and volumes. We fully implemented the first stage and processed the entire 55 TB Hyperion data set from the raw data (Level 0) to top-of-the-atmosphere radiance (Level 1R). We are currently evaluating the ISOFIT atmospheric correction module to convert the L1R data to surface reflectance (Level 2) before reprocessing the full data set to L2. Crosschecks are being performed with RadCalNet as well as with coincident observations by AVIRIS. We are also investigating modern methods for georectifying the Hyperion scenes. Finally, we describe an analysis of the cost to conduct forward processing and reprocessing campaigns for SBG on HECC with dedicated compute and storage resources using the resurrected Hyperion pipeline as a proxy for full-volume SBG data. The analysis demonstrates that SBG L0 data can be processed to L2 on HECC with full reprocessing campaigns every two years for ~$2.6M over a 7-year lifespan. Moreover, 69% of the system capacity would be available for other activities, possibly enabling future open-source science activities, including algorithm development, L3+ processing, .etc.

ESD↗
NASA NTRSDate not supplied

High Density Vertiplex: Scalable Autonomous Operations Prototype Assessment Simulation

Urban Air Mobility (UAM) is a rapidly growing topic within the field of aviation because of the impact a refined ecosystem and uncrewed aerial vehicles could have on modern society, such as urban air mobility, cargo, and emergency transport. Before the UAM concept can be actualized, research is needed to understand how to integrate these new classes of vehicles and operations into the National Airspace System. One under-researched but critical piece of infrastructure required for UAM operations is Vertiport operations. Vertiports are the envisioned takeoff and landing locations for these uncrewed aerial vehicles. To accommodate the high use of the vertiport, new technologies and roles will be required for optimal use. At NASA, the High Density Vertiplex sub-project targets research into vertiports. The High Density Vertiplex team created an Urban Air Mobility ecosystem to test and evaluate different concepts and tools used to support higher density operations at vertiports. Part of the test and evaluation included the Prototype Assessment Operations simulation of highdensity operations around a vertiport to study vertiport management and vertiport operations. The research team also evaluated how the prototype Urban Air Mobility ecosystem supported fleet managers, ground control station operators, and vertiport managers in execution of nominal and off-nominal high-density operations. Results from this simulation provided insight regarding UAM ecosystem research and development and vertiport automation systems.

Small Uncrewed Aerial Vehicle (sUAS)↗
NASA NTRS2024

Temporal Activation of Extravehicular Activity Science and Operations Data: How Rise2's Enablement of a Novel Data Management Prototype Influenced ISS and Artemis Advancements

SSERVI's RIS4E and Rise2 nodes provided early and repeated opportunities to prototype the organization and visualization of science and field operations data together via temporal vs. type-indexing. This data management approach was first explored in our Apollo in Real Time initiative through its meticulous reconciliation and integration of Apollo 11, 13, and 17 mission data, providing an unparalleled temporal and contextual understanding of these historic missions. The positive results from these prototypes served as pre-cursor examples of what eventually became the Collaborative Operations Data Activation (CODA) application at NASA Johnson Space Center (JSC).

B Feist↗
NASA NTRSDate not supplied

Trace Contaminant Control Test Bed for Evaluation of TCC Prototypes with Vacuum Regenerable and Non-Regenerable Sorbents

A new Space Suit Exploration Portable Life Support System (xPLSS) is being designed, built, integrated, and tested into the Extra-Vehicular Mobility Unit (xEMU). The Trace Contaminant Control (TCC) system is a component in the oxygen ventilation loop of xPLSS that removes contaminants generated by the crewmembers’ metabolic processes. The primary trace contaminants that must be removed include ammonia (NH3), carbon monoxide (CO), formaldehyde (CH2O), and methyl mercaptan (CH3SH). The current state-of-the-art TCC sorbent is non-regenerable activated carbon. As a non-regenerable sorbent, its use negatively impacts the logistics for future missions. Thus, an ideal solution can be a vacuum-regenerable sorbent integrated with the xPLSS CO2/H2O removal system. To test new designs and sorbents, XploSafe has constructed a recirculating test bed that mimics the environment within the xPLSS by providing concentrations of the trace contaminant analytes generated at the operating temperature, humidity, pressure, and flow rates of the xPLSS. This system can perform regeneration or desorption by exposing the sorbent to a pressure swing from 4.3 psia to <1 torr over approximately 2 minutes. Using this test system, XploSafe evaluated various TCC prototypes constructed using rapid prototyping techniques and identified a process that allows vacuum regenerative TCC designs to be quickly examined for flow, pressure drop, and performance. By using toluene as a segregate for volatile organics, this test system was evaluated using both vacuum regenerable and non-regenerable sorbents to demonstrate the operational effectiveness of these sorbents in maintaining the concentrations of the trace contaminant analytes below the 7-day Spacecraft Maximum Allowable Concentrations.

Nicholas Materer↗