Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “property”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Physical properties and electronic structure of a new barium titanate suboxide Ba{sub 1+δ}Ti{sub 13−δ}O{sub 12} (δ = 0.11)

The structure, transport, thermodynamic properties, x-ray absorption spectra (XAS), and electronic structure of a new barium titanate suboxide, Ba{sub 1+δ}Ti{sub 13−δ}O{sub 12} (δ = 0.11), are reported. It is a paramagnetic poor metal with hole carriers dominating the transport. Fermi liquid behavior appears at low temperature. The oxidization state of Ti obtained by the XAS is consistent with the metallic Ti{sup 2+} state. Local density approximation band structure calculations reveal the material is near the Van Hove singularity. The pseudogap behavior in the Ti-d band and the strong hybridization between the Ti-d and O-p orbitals reflect the characteristics of the building blocks of the Ti{sub 13} semi-cluster and the TiO{sub 4} quasi-squares, respectively.

36 MATERIALS SCIENCE↗

Novel pre-alloyed powder processing of modified alnico 8: Correlation of microstructure and magnetic properties

Progress is reviewed on development of an improved near-final bulk magnet fabrication process for alnico 8, as a non-rare earth permanent magnet with promise for sufficient energy density and coercivity for electric drive motors. This study showed that alnico bulk magnets in near-final shape can be made by simple compression molding from spherical high purity gas atomized pre-alloyed powder. Dwell time at peak sintering temperature (1250 °C) greatly affected grain size of the resulting magnet alloys. This microstructure transformation was demonstrated to be useful for gaining partially aligned magnetic properties and boosting energy product. While a route to increased coercivity was not identified by these experiments, manufacturability of bulk alnico magnet alloys in near-final shapes was demonstrated, permitting further processing and alloy modification experiments that can target higher coercivity and better control of grain anisotropy during grain growth.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical and transport properties of dense liquid silica

Using density-functional-theory based molecular dynamics and the Kubo-Greenwood linear response theory, we evaluated the high-pressure equation of state and the optical and transport properties of quartz and fused silica shock-compressed to 2000 GPa. The computed Hugoniots and corresponding optical reflectivity values are in very good agreement with published data for quartz, and new data that we obtained on fused silica using magnetically launched flyer plate experiments. The rise of optical reflectivity upon shock compression appears to be primarily a temperature-driven mechanism, which is relatively insensitive to small density variation. We observed that the electrical conductivity does not display Drude-like frequency dependence, especially at lower temperatures. In addition, the Wiedemann-Franz relation between electrical and thermal conductivities was found to be invalid. It suggests that even at three-fold compression, warm dense liquid silica on the Hugoniot curve is still far away from the degenerate limit.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structures and magnetic properties of Co-Zr-B magnets studied by first-principles calculations

The structures and magnetic properties of Co-Zr-B alloys near the composition of Co{sub 5}Zr with B at. % ≤6% were studied using adaptive genetic algorithm and first-principles calculations. The energy and magnetic moment contour maps as a function of chemical composition were constructed for the Co-Zr-B magnet alloys through extensive structure searches and calculations. We found that Co-Zr-B system exhibits the same structure motif as the “Co{sub 11}Zr{sub 2}” polymorphs, and such motif plays a key role in achieving strong magnetic anisotropy. Boron atoms were found to be able to substitute cobalt atoms or occupy the “interruption” sites. First-principles calculations showed that the magnetocrystalline anisotropy energies of the boron-doped alloys are close to that of the high-temperature rhombohedral Co{sub 5}Zr phase and larger than that of the low-temperature Co{sub 5.25}Zr phase. Our calculations provide useful guidelines for further experimental optimization of the magnetic performances of these alloys.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural and electrical properties of In-implanted Ge

We report on the effects of dopant concentration on the structural and electrical properties of In-implanted Ge. For In concentrations of ≤ 0.2 at. %, extended x-ray absorption fine structure and x-ray absorption near-edge structure measurements demonstrate that all In atoms occupy a substitutional lattice site while metallic In precipitates are apparent in transmission electron micrographs for In concentrations ≥0.6 at. %. Evidence of the formation of In-vacancy complexes deduced from extended x-ray absorption fine structure measurements is complimented by density functional theory simulations. Hall effect measurements of the conductivity, carrier density, and carrier mobility are then correlated with the substitutional In fraction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Site preference and magnetic properties of Ga/In-substituted strontium hexaferrite: An ab initio study

The first-principles density functional theory has been used to study Ga/In-substituted strontium hexaferrite (SrFe12O19). Based on the calculation of the substitution energy of Ga and In in SrFe12O19 and the formation probability analysis, we conclude that in SrFe12−xGaxO19 the substituted Ga atoms prefer to occupy the 12k, 2a, and 4f1 sites, while In atoms in SrFe12−xInxO19 occupy the 12k, 4f2, and 4f1 sites. We used the site occupation probabilities to calculate the magnetic properties of the substituted SrFe12O19. It was found that as the fraction of Ga atoms in SrFe12−xGaxO19 increases, the saturation magnetization (Ms) as well as magnetic anisotropy energy (MAE) decrease, while the anisotropy field (Ha) increases. In the case of SrFe12−xInxO19, Ms, MAE, and Ha decrease with an increase of the concentration of In atoms.

Dixit, Vivek (ORCID:000000029178217X)↗

Optical and electronic properties of semiconducting Sn{sub 2}S{sub 3}

We report the electronic and optical properties of Sn{sub 2}S{sub 3} as obtained from first principles calculations with the modified Becke-Johnson potential. The electronic structure shows that Sn occurs in both divalent and tetravalent forms. The fundamental band gap of 0.82 eV is indirect. The direct gap is 0.97 eV, but the onset of strong optical absorption is much higher at ∼1.75 eV. This is as a consequence of the Sn{sup 2+} s and Sn{sup 4+} s characters of the valence and conduction band extrema, respectively. We also find strong and different anisotropies for conduction in p- and n-type Sn{sub 2}S{sub 3}. This should be taken into account in device structures in order to obtain efficient charge collection. The thermopowers are reasonably high for both p- and n-type materials. p-type Sn{sub 2}S{sub 3} shows complex corrugated isosurface sections, while the n-type material shows multiple band extrema.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evolution of structure and transport properties of the Ba 8 Cu 16 P 30 clathrate-I framework with the introduction of Ga

Two type-I clathrates were synthesized by introducing Ga into the framework of the Ba 8 Cu 16 P 30 type-I clathrate. The introduction of minute amounts of Ga, 1.9% Ga/M total (where M total = Cu + Ga), resulted in the disturbance of the completely ordered Pbcn superstructure of Ba 8 Cu 16 P 30 . Ba 8 Cu 15.43(2) Ga 0.3 P 30.26(3) crystallizes in a partially ordered orthorhombic Pmna clathrate-I superstructure with five out of 15 framework sites being jointly occupied by metal+phosphorus. Increasing the Ga content resulted in all framework sites being occupied by metal + phosphorus in the archetype cubic Pm n clathrate-I crystal structure of Ba 8 Cu 14.5(3) Ga 1.3 P 30.2(4) with 8.2% Ga/M total . A combination of energy dispersive x-ray spectroscopy, inductively coupled plasma mass spectroscopy, and single crystal x-ray diffraction was used to determine the structures alongside the compositions. The positional disorder was verified by 31 P solid state NMR spectroscopy. Characterization of the transport properties indicated that the Ga-substituted samples exhibit higher Seebeck coefficients and electrical resistivities compared to its pristine counterpart, in line with the expected reduction of the hole concentration due to Ga/Cu substitution. Moderate improvements in the thermoelectric power factor and overall figure-of-merit were observed for samples with 6.9% and 3.8% Ga/M total as compared to those for the pristine Ba 8 Cu 16 P 30 clathrate. Finally, band structure calculations shed light on how Ga substitution affects the electronic structure and thermoelectric properties of studied clathrates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Doping effect on the physical properties of Ca 10 Pt 3 As 8 (Fe 2 As 2 ) 5 single crystals

Ca 10 Pt 3 As 8 (Fe 2 As 2 ) 5 is a unique parent compound for superconductivity, which consists of both semiconducting Pt 3 As 8 and metallic FeAs layers. We report the observation of superconductivity induced via chemical doping in either Ca site using rare-earth (RE) elements (RE = La, Gd) or Fe site using Pt. The interlayer distance and the normal-state physical properties of the doped system change correspondingly. The coupled changes include (1) superconducting transition temperature T c increases with increasing both doping concentration and interlayer distance, (2) our T c value is higher than previously reported maximum value for Pt doping in the Fe site, (3) both the normal-state in-plane resistivity and out-of-plane resistivity change from non-metallic to metallic behavior with increasing doping concentration and T c , and (4) the transverse in-plane magnetoresistance (MR ab ) changes from linear-field dependence to quadratic behavior upon increasing T c . For La-doped compound with the highest T c (~35 K), upper critical fields ($H_{c2}^{ab} , H_{c2}^c$), coherence lengths (ξ ab , ξ c ), and in-plane penetration depth (λ ab ) are estimated. Finally, we discuss the relationship between chemical doping, interlayer distance, and physical properties in this system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-pressure crystal growth and magnetic and electrical properties of the quasi-one dimensional osmium oxide Na{sub 2}OsO{sub 4}

Na{sub 2}OsO{sub 4} crystals were grown by a NaCl flux method under high pressure. It crystallizes in the Ca{sub 2}IrO{sub 4}-type structure without having additional elements or metal vacancies, which are usually accommodated. It appears that Na{sub 2}OsO{sub 4} is a metal-stoichiometric Ca{sub 2}IrO{sub 4}-type compound never been synthesized to date. Na{sub 2}OsO{sub 4} has the octahedral environment of Os{sup 6+}O{sub 6} so that the electronic configuration is 5d{sup 2}, suggesting the magnetic S=1 ground state. However, magnetization, electrical resistivity, and specific heat measurements indicated that the non-magnetic S=0 state is much likely for Na{sub 2}OsO{sub 4} than the S=1 state. Band structure calculations and the structure analysis found that the disagreement is probably due to the statically uniaxial compression of the OsO{sub 6} octahedra, resulting in splitting of the t{sub 2{sub g}} band. - Graphical abstract: Na{sub 2}OsO{sub 4} crystals were grown by a NaCl flux method under high pressure. It crystallizes in the Ca{sub 2}IrO{sub 4}-type structure comprising infinite Os{sup 6+}O{sub 6} octahedra (5d{sup 2}) chains. The crystal growth, the crystal structure, and the magnetic and electrical properties are reported.

36 MATERIALS SCIENCE↗

Photocatalytic Nanofiltration Membranes with Self‐Cleaning Property for Wastewater Treatment

Membrane fouling is one of the most severe problems restricting membrane separation technology for wastewater treatment. This work reports a photocatalytic nanofiltration membrane (NFM) with self‐cleaning property fabricated using a facile biomimetic mineralization process. In this strategy, a polydopamine (PDA)/polyethyleneimine (PEI) intermediate layer is fabricated on an ultrafiltration membrane via a co‐deposition method followed by mineralization of a photocatalytic layer consisting of β‐FeOOH nanorods. The PDA–PEI layer acts both as a nanofiltration selective layer and an intermediate layer for anchoring the β‐FeOOH nanorods via strong coordination complexes between Fe 3+ and catechol groups. In visible light, the β‐FeOOH layer exhibits efficient photocatalytic activity for degrading dyes through the photo‐Fenton reaction in the presence of hydrogen peroxide, endowing the NFM concurrently with effective nanofiltration performance and self‐cleaning capability. Moreover, the mineralized NFMs exhibit satisfactory stability under simultaneous filtration and photocatalysis processing, showing great potential in advanced wastewater treatment.

Lv, Yan↗