Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “production”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Effect of dietary fiber fermentation on short‐chain fatty acid production and microbial composition in vitro

Abstract BACKGROUND The efficient utilization of fiber‐rich co‐products is important for optimizing feed resource utilization and animal health. This study was conducted to evaluate the fermentation characteristics of fiber‐rich co‐products, which had equal quantities of total dietary fiber (TDF), at different time points using batch in vitro methods. It considered their gas production, short‐chain fatty acid (SCFA) production, and microbial composition. RESULTS The fermentation of wheat bran (WB) and oat bran (OB) showed higher and faster ( P < 0.05) gas and SCFA production than corn bran (CB), sugar beet pulp (SBP), and soybean hulls (SH). The α ‐diversity was higher in the CB, SBP, and SH groups than in the WB and OB groups ( P < 0.05). At the phylum level, OB and WB fermentation showed lower ( P < 0.05) relative abundance of Actinobacteria than the CB, SBP, and SH groups. At the genus level, OB and WB fermentation increased the Enterococcus population in comparison with the CB, SBP, and SH groups, whereas CB and SBP fermentation improved the relative abundance of the Christensenellaceae R‐7 group more than the WB, OB, and SH groups ( P < 0.05). CONCLUSION Overall, WB and OB were rapidly fermented by fecal microbiota, in contrast with SBP, SH, and CB. Fermentation of different fiber‐rich co‐products with an equal TDF content gives different responses in terms of microbial composition and SCFA production due to variations in their physicochemical properties and molecular structure. © 2020 Society of Chemical Industry

Bai, Yu↗
DOE OSTI2021

Measurements of Higgs boson production cross sections and couplings in the diphoton decay channel at $ \sqrt{\mathrm{s}} $ = 13 TeV

Measurements of Higgs boson production cross sections and couplings in events where the Higgs boson decays into a pair of photons are reported. Events are selected from a sample of proton-proton collisions at s√ = 13 TeV collected by the CMS detector at the LHC from 2016 to 2018, corresponding to an integrated luminosity of 137 fb -1 . Analysis categories enriched in Higgs boson events produced via gluon fusion, vector boson fusion, vector boson associated production, and production associated with top quarks are constructed. The total Higgs boson signal strength, relative to the standard model (SM) prediction, is measured to be 1.12±0.09. Other properties of the Higgs boson are measured, including SM signal strength modifiers, production cross sections, and its couplings to other particles. These include the most precise measurements of gluon fusion and vector boson fusion Higgs boson production in several different kinematic regions, the first measurement of Higgs boson production in association with a top quark pair in five regions of the Higgs boson transverse momentum, and an upper limit on the rate of Higgs boson production in association with a single top quark. All results are found to be in agreement with the SM expectations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Gravitational production of heavy particles during and after inflation

Abstract We investigate the gravitational production of a scalar fieldχwith a mass exceeding the Hubble scale during inflationm χ ≳H I , employing both analytical and numerical approaches. We demonstrate that the steepest descent method effectively captures the epochs and yields of gravitational production in a compact and simple analytical framework. These analytical results align with the numerical solutions of the field equation. Our study covers three spacetime backgrounds: de Sitter, power-law inflation, and the Starobinsky inflation model. Within these models, we identify two distinct phases of particle production: during and after inflation. During inflation, we derive an accurate analytic expression for the particle production rate, accounting for a varying Hubble rate. After inflation, the additional burst of particle production depends on the inflaton mass around its minimum. When this mass is smaller than the Hubble scale during inflation,H I , there is no significant extra production. However, if the inflaton mass is larger, post-inflation production becomes the dominant contribution. Furthermore, we explore the implications of gravitationally produced heavy fields for dark matter abundance, assuming their cosmological stability.

Physics↗
DOE OSTI2021

A comparative study of Higgs boson production from vector-boson fusion

The data taken in Run II at the Large Hadron Collider have started to probe Higgs boson production at high transverse momentum. Future data will provide a large sample of events with boosted Higgs boson topologies, allowing for a detailed understanding of electroweak Higgs boson plus two-jet production, and in particular the vector-boson fusion mode (VBF). We perform a detailed comparison of precision calculations for Higgs boson production in this channel, with particular emphasis on large Higgs boson transverse momenta, and on the jet radius dependence of the cross section. We study fixed-order predictions at next-to-leading order and next-to-next-to-leading order QCD, and compare the results to NLO plus parton shower (NLOPS) matched calculations. The impact of the NNLO corrections on the central predictions is mild, with inclusive scale uncertainties of the order of a few percent, which can increase with the imposition of kinematic cuts. We find good agreement between the fixed-order and matched calculations in non-Sudakov regions, and the various NLOPS predictions also agree well in the Sudakov regime. We analyze backgrounds to VBF Higgs boson production stemming from associated production, and from gluon-gluon fusion. At high Higgs boson transverse momenta, the Δy$_{jj}$ and/or m$_{jj}$ cuts typically used to enhance the VBF signal over background lead to a reduced efficiency. We examine this effect as a function of the jet radius and using different definitions of the tagging jets. QCD radiative corrections increase for all Higgs production modes with increasing Higgs boson p$_{T}$, but the proportionately larger increase in the gluon fusion channel results in a decrease of the gluon-gluon fusion background to electroweak Higgs plus two jet production upon requiring exclusive two-jet topologies. We study this effect in detail and contrast in particular a central jet veto with a global jet multiplicity requirement.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Metabolic engineering of non-pathogenic microorganisms for 2,3-butanediol production

2,3-Butanediol (2,3-BDO) is a promising commodity chemical with various industrial applications. While petroleum-based chemical processes currently dominate the industrial production of 2,3-BDO, fermentation-based production of 2,3-BDO pro- vides an attractive alternative to chemical-based processes with regards to economic and environmental sustainability. The achievement of high 2,3-BDO titer, yield, and productivity in microbial fermentation is a prerequisite for the production of 2,3-BDO at large scales. Also, enantiopure production of 2,3-BDO production is desirable because 2,3-BDO stereoisomers have unique physicochemical properties. Pursuant to these goals, many metabolic engineering strategies to improve 2,3-BDO pro- duction from inexpensive sugars by Klebsiella oxytoca, Bacillus species, and Saccharomyces cerevisiae have been developed. Furthermore, this review summarizes the recent advances in metabolic engineering of non-pathogenic microorganisms to enable efficient and enantiopure production of 2,3-BDO.

2,3-BDO stereoisomers↗
DOE OSTI2024

Life-cycle analysis of offshore macroalgae production systems in the United States

Offshore macroalgae production offers the potential to provide valuable biomass for food, energy, and higher value products without the use of land or freshwater while using excess nutrients and carbon dioxide. To realize this potential, the Macroalgae Research Inspiring Novel Energy Resources program of the Advanced Research Projects Agency-Energy has initiated projects to develop advanced cultivation technologies that enable the cost- and energy-efficient production of macroalgal biomass. Here, this study addresses the life-cycle greenhouse gas emissions and energy return on investment for five U.S. offshore macroalgae production systems designed for deployment at the thousand-hectare scale using a detailed module developed within the GREET life-cycle analysis model for this study. The carbon intensity of macroalgae production system designs, expressed as kg of carbon dioxide equivalent per dry metric ton of algae harvested, vary widely from 49 to 220 and confirm that biomass productivity has the highest degree of sensitivity across the model parameters tested. Regardless of the system designs, the upstream and combustion emissions from fuel use are the key contributor (over 45 %) to carbon intensity, indicating that the use of low-carbon fuels (e.g., renewable diesel) could further reduce greenhouse gas emissions. Further studies need to specify the market opportunity and specific product slates for macroalgae to provide a complete picture of the environmental impacts of macroalgal feedstock.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Evaluation of cosmogenic production of 39 Ar and 42 Ar for rare-event physics using underground argon

Underground argon (UAr) with lower cosmogenic activities of 39 Ar and 42 Ar has been planned as a detector in detecting scintillation light and charge collection using time projection chambers for dark matter searches and as a veto detector in suppressing backgrounds for neutrinoless double beta decay (0$vββ$ ) experiments. Long-lived radioactive isotopes, 39 Ar and 42 Ar, can also be produced on the surface when UAr is pumped out from a deep well. Understanding the production of long-lived isotopes in Ar is important for utilizing UAr for dark matter and 0$vββ$ experiments in terms of its production, transportation, and storage. Ar exposure to cosmic rays at sea-level is simulated using Geant4 for a given cosmic ray muon, neutron, and proton energy spectrum. Here we report the simulated cosmogenic production rates of 39 Ar, 42 Ar, and other long-lived isotopes at sea-level from fast neutrons, high energy muons, and high energy protons. Total production rates of 938.53/kg Ar day and 5.81 × 10 -3 /kg Ar day for 39 Ar and 42 Ar are found from our simulation. Utilizing these production rates, we set a time limit of 954 days constrained by the production of 39 Ar for UAr to be on the surface before it compromises the sensitivity for a dark matter experiment. Similarly, a time limit of 1702 days constrained by the production of 42 Ar is found for a 0$vββ$ experiment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Monitoring agroecosystem productivity and phenology at a national scale: A metric assessment framework

Effective measurement of seasonal variations in the timing and amount of production is critical to managing spatially heterogeneous agroecosystems in a changing climate. Although numerous technologies for such measurements are available, their relationships to one another at a continental extent are unknown. Using data collected from across the Long-Term Agroecosystem Research (LTAR) network and other networks, we investigated correlations among key metrics representing primary production, phenology, and carbon fluxes in croplands, grazing lands, and crop-grazing integrated systems across the continental U.S. Metrics we examined included gross primary productivity (GPP) estimated from eddy covariance (EC) towers and modelled from the Landsat satellite, Landsat NDVI, and vegetation greenness (Green Chromatic Coordinate, GCC) from tower-mounted PhenoCams for 2017 and 2018. Overall, our analysis compared production dynamics estimated from three independent ground and remote platforms using data for 34 agricultural sites constituting 51 site-years of co-located time series. Pairwise sensor comparisons across all four metrics revealed stronger correlation and lower root mean square error (RMSE) between end of season (EOS) dates (Pearson R ranged from 0.6 to 0.7 and RMSE from 32.5 to 67.8) than start of season (SOS) dates (0.46 to 0.69 and 40.4 to 66.2). Overall, moderate to high correlations between SOS and EOS metrics complemented one another except at some lower productivity grazing land sites where estimating SOS can be challenging. Growing season length estimates derived from 16-day satellite GPP (179.1 days) were significantly longer than those from PhenoCam G CC (70.4 days, p adj < 0.0001) and EC GPP (79.6 days, p adj < 0.0001). Landscape heterogeneity did not explain differences in SOS and EOS estimates. Annual integrated estimates of productivity from EC GPP and PhenoCam G CC diverged from those estimated by Landsat GPP and NDVI at sites where annual production exceeds 1000 gC/m –2 yr –1 . Based on our results, we developed a “metric assessment framework” that articulates where and how metrics from satellite, eddy covariance and PhenoCams complement, diverge from, or are redundant with one another. The framework was designed to optimize instrumentation selection for monitoring, modeling, and forecasting ecosystem functioning with the ultimate goal of informing decision-making by land managers, policy-makers, and industry leaders working at multiple scales.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Techno-economic feasibility of geothermal energy production using inactive oil and gas wells for district heating and cooling systems in Tuttle, Oklahoma

Oil and gas wells have been drilled in the United States and often encounter hot co-produced water possibly suitable for geothermal direct-use applications. Here this study evaluated geothermal resources, heating and cooling demand, and techno-economic potential of four oil and gas wells repurposed for geothermal energy production to serve two public schools and 250 nearby houses in Tuttle, Oklahoma, USA. Subsurface geology in the study area primarily consists of Permian to Mississippian sandstone and limestone formations approximately from 2 km to 3.5 km depth. With a geothermal gradient of 25.3 °C/km, the temperature of geothermal energy production was estimated as 68.2 °C at 2.1 km. The potential of calcite scaling within boreholes and pipes was minimal. Using the characterized reservoir properties, techno-economic analyses were conducted for evaluating levelized costs of geothermal energy production for direct-use heating and cooling and district heating systems with five different production scenarios. Heating and cooling demand in two schools and 250 houses and additional 0.3 MW and 0.6 MW base heating loads for potential geothermal direct-use applications in the study area were also incorporated in the modeling. Results indicated that the levelized cost of heating of geothermal district heating systems utilizing existing wells were significantly lower than those of conventional geothermal energy systems that include well drillings. The geothermal energy production with doublet and quartet configurations was generally sufficient to supply total annual heating demand in the district, while a peaking boiler was used to supply peak loads. Doublet configurations showed higher production temperature with a lower thermal drawdown than the quartet configurations. The doublet system at 2.1 km production depth with 9.3 kg/s flow rate represented the optimal levelized cost of $71/MWh and 91.2% utilization factor. These results imply that the Tuttle geothermal district heating system is techno-economically feasible and comparable to geothermal district heating systems in the United States and the regional natural gas rate for residentials by recycling inactive oil and gas wells with no drillings.

15 GEOTHERMAL ENERGY↗
DOE OSTI2023

Techno-economic and environmental assessment of solar-based electrical vehicles charging stations integrated with hydrogen production

With the growing interest in adopting both commercial and residential electric vehicles (EVs) utilizing green renewable energy, the techno-economic assessment of EV charging stations with solar energy is a critical aspect of the transition to sustainable transportation. However, battery storage capacity for variable solar energy production is becoming increasingly less cost-effective due to the higher Lithium price. Complementing solar energy production and battery storage, the potential of combining green hydrogen fuel energy integration with solar energy for EV charging stations can provide a sustainable alternative to reach carbon-free transportation. This research aims to assess the technical and economic viability of grid-connected Photovoltaic (PV)-based EV charging stations across Kentucky based on existing EV load profiles. The study considers different PV system sizes, locations, orientations, and the impact of net metering policies and electricity tariffs on the profitability of the PV systems. Further, using excess PV energy, Lithium-Ion batteries will be charged, which will be assessed considering the techno-economic and environmental impacts of green EV charging stations. To further enhance green renewable energy production, we also investigated the feasibility of on-grid PV-based EV charging stations with Lithium-Ion batteries charged during low tariff periods. In comparison with these scenarios, we studied the potential benefits of integrating green hydrogen energy production using excess solar energy with and without governmental incentives. Furthermore, we assess the environmental impact of these green EV charging stations across Kentucky. Our study indicates that EV stations across Kentucky have similar techno-economic feasibility with insignificant deviation in the levelized cost of electricity, payback period, and PV energy fraction with/without Li-Ion batteries. However, with green hydrogen production, the marginal H 2 production cost indicates the first scenario (on-grid PV energy charging) is the most significant, roughly 10 USD/Kg, which is similar to 1.5 times higher than the second (charging during low-tariff periods) and the third scenarios (power grid to satisfy the demand deficit - approximately 6.5 USD/Kg). From the environmental perspective, the second scenario would be a good option for either hybrid EV/H 2 or EV charging stations in Kentucky, factoring in the hydrogen production cost and the carbon footprint.

08 HYDROGEN↗
DOE OSTI2020

Towards real-time forecasting of natural gas production by harnessing graph theory for stochastic discrete fracture networks

In this work, we compare hydrocarbon production curves obtained from a graph-based reduced-order model with the high-fidelity Discrete Fracture Network (DFN) predictions for a fracture network created using data from a real shale site. We observe that the bounds for the high fidelity DFN model lie within the bounds for the reduced order model, implying that the reduced-order model provides a conservative estimate. Moreover, we found that except for first-passage times and late arriving mass, the production curves from the reduced-order model predict transport accurately. However, it is to be noted that the results are inspite of trading a three-dimensional geometry for a reduced system in the form of a graph, one that is 500–1000 times faster in terms of computational efficiency (for this particular application). In addition, we also compare the production curves for large drawdown and small drawdown using our graph approach. The reduced-order model is successful in showing that the long term productivity is higher in case of small drawdown although the initial productivity is higher for large drawdown. Thus, this reduced-order model offers great potential in uncertainty quantification for production, as well as in providing operators with information to make real-time decisions for optimal production.

03 NATURAL GAS↗
DOE OSTI2021

Techno-economic analysis of hydroprocessed renewable jet fuel production from pennycress oilseed

Commercial production of jet fuel from biobased feedstocks is still encumbering, mainly due to their high production cost and competition with food resources. Pennycress oilseed is a potential jet fuel feedstock which can be supplied at a lower price compared to similar oilseeds, such as soybean and canola. However, the technoeconomics of pennycress-based jet fuel production needs to be evaluated. The objective of this study was to assess the technical feasibility and costs of hydroprocessed renewable jet fuel (HRJ) production from pennycress. The production capacity was considered to be 18.9 million L/yr (5 million gal/yr). The analysis considered pennycress grain handling and conditioning, oil extraction and conversion to HRJ and byproducts, i.e., LPG, naphtha and green diesel, through hydroprocessing technology, as well as pennycress meal processing as boiler fuel and wastewater treatment. Total investment for establishing the HRJ biorefinery at the selected capacity was estimated to be 90.8 million USD. Minimum selling price (MSP) of HRJ was estimated to be 1.2 USD/L, which was comparable to the MSP of HRJ from similar oilseeds, including soybean and canola. It could also be further reduced by supplying pennycress grain at a lower price, increasing the oil content and increasing the production capacity of the biorefinery. Furthermore, the outcomes of this research would help establish the performance targets needed to reach the economic viability of HRJ production from pennycress at the commercial scale.

09 BIOMASS FUELS↗
DOE OSTI2020

Valorization of CO 2 through lithoautotrophic production of sustainable chemicals in Cupriavidus necator

Coupling recent advancements in genetic engineering of diverse microbes and gas-driven fermentation provides a path toward sustainable commodity chemical production. Cupriavidus necator H16 is a suitable species for this task because it effectively utilizes H 2 and CO 2 and is genetically tractable. Here, we demonstrate the versatility of C. necator for chemical production by engineering it to produce three products from CO 2 under lithotrophic conditions: sucrose, polyhydroxyalkanoates (PHAs), and lipochitooligosaccharides (LCOs). We engineered sucrose production in a co-culture system with heterotrophic growth 30 times that of WT C. necator. We engineered PHA production (20-60% DCW) and selectively altered product composition by combining different thioesterases and phaCs to produce copolymers directly from CO 2 . And, we engineered C. necator to convert CO 2 into the LCO, a plant growth enhancer, with titers of ~1.4 mg/L—equivalent to yields in its native source, Bradyrhizobium. Here, we applied the LCOs to germinating seeds as well as corn plants and observed increases in a variety of growth parameters. Taken together, these results expand our understanding of how a gas-utilizing bacteria can promote sustainable production.

09 BIOMASS FUELS↗
DOE OSTI2020

Enhanced 2'-Fucosyllactose production by engineered Saccharomyces cerevisiae using xylose as a co-substrate

2'-Fucosyllactose (2'-FL), a human milk oligosaccharide with confirmed benefits for infant health, is a promising infant formula ingredient. Although Escherichia coli, Saccharomyces cerevisiae, Corynebacterium glutamicum, and Bacillus subtilis have been engineered to produce 2'-FL, their titers and productivities need be improved for economic production. Glucose along with lactose have been used as substrates for producing 2'-FL, but accu- mulation of by-products due to overflow metabolism of glucose hampered efficient production of 2' -FL regardless of a host strain. To circumvent this problem, we used xylose, which is the second most abundant sugar in plant cell wall hydrolysates and is metabolized through oxidative metabolism, for the production of 2'-FL by engi- neered yeast. Specifically, we modified an engineered S. cerevisiae strain capable of assimilating xylose to pro- duce 2' -FL from a mixture of xylose and lactose. First, a lactose transporter (Lac12) from Kluyveromyces lactis was introduced. Second, a heterologous 2'-FL biosynthetic pathway consisting of enzymes Gmd, WcaG, and WbgL from Escherichia coli was introduced. Third, we adjusted expression levels of the heterologous genes to maximize 2'-FL production. The resulting engineered yeast produced 25.5 g/L of 2'-FL with a volumetric productivity of 0.35 g/L∙h in a fed-batch fermentation with lactose and xylose feeding to mitigate the glucose repression. Interestingly, the major location of produced 2'-FL by the engineered yeast can be changed using different culture media. While 72% of the produced 2'-FL was secreted when a complex medium was used, 82% of the produced 2'-FL remained inside the cells when a minimal medium was used. In conclusion, as yeast extract is already used as food and animal feed ingredients, 2'-FL enriched yeast extract can be produced cost-effectively using the 2'-FL-accumu- lating yeast cells.

2′ -fucosyllactose↗
DOE OSTI2025

Etch Products of Copper Atomic Layer Etching by Oxidation and Formic Acid Vapor

Atomic layer etching (ALE) of metals offers a path to greater control of selectivity, etch rate, and etch profile. However, tailoring a process to meet these demands requires an understanding of the volatile etch product, which is challenging to detect due to low product concentrations and the paramagnetism of many metalorganic products. Here, in this work, several complementary analysis techniques were used to determine the volatile etch product and residual surface species of a Cu ALE process based on plasma oxidation and formic acid vapor etching of the oxidized layer. It was shown that the volatile product was copper formate with a Cu 2+ paramagnetic center, in concordance with prior density functional theory (DFT) calculations. While copper formate tetrahydrate was formed, it was determined that the tetrahydrate product was confined to the surface, with anhydrous copper formate being the volatile etch product.

Smith, Taylor G. [Univ. of California, Los Angeles↗
DOE OSTI2024

Controlling Product Selectivity in Photochemical CO 2 Reduction with the Redox Potential of the Photosensitizer

The ability to selectively reduce CO 2 to a particular product or mixture of products is expected to play a key role in mitigation strategies aiming to alleviate the devastating impact of this greenhouse gas in our climate and oceans. Among those, the production of liquid solar fuels from CO 2 and H 2 O will likely need cascade strategies involving multiple catalysts carrying out different functions. This will require that the catalysts doing the initial CO 2 reduction steps deliver the right product or products to downstream catalysts. CO, H 2 and formate are the most common products in CO 2 reduction by molecular catalysts. Here, in this work, we demonstrate control over the selectivity of C 1 products in photochemical CO 2 reduction with the same catalyst, simply by changing the redox potential of the photosensitizer and/or the water concentration. Turnover numbers for CO generation with one of the photosensitizers under anhydrous conditions reached 85,000, one of the largest values reported to date. A combination of experimental results and DFT calculations show that control of the selectivity is achieved, in part, due to the interplay between regimes under kinetic or thermodynamic control. These regimes are largely dictated by the proton sources and the CO 2 reduction byproducts generated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Integration of Yeast Episomal/Integrative Plasmid Causes Genotypic and Phenotypic Diversity and Improved Sesquiterpene Production in Metabolically Engineered Saccharomyces cerevisiae

The variability in phenotypic outcomes among biological replicates in engineered microbial factories presents a captivating mystery. Establishing the association between phenotypic variability and genetic drivers is important to solve this intricate puzzle. Here, we applied a previously developed auxin-inducible depletion of hexokinase 2 as a metabolic engineering strategy for improved nerolidol production in Saccharomyces cerevisiae, and biological replicates exhibit a dichotomy in nerolidol production of either 3.5 or 2.5 g L –1 nerolidol. Harnessing Oxford Nanopore’s long-read genomic sequencing, we reveal a potential genetic cause—the chromosome integration of a 2μ sequence-based yeast episomal plasmid, encoding the expression cassettes for nerolidol synthetic enzymes. This finding was reinforced through chromosome integration revalidation, engineering nerolidol and valencene production strains, and generating a diverse pool of yeast clones, each uniquely fingerprinted by gene copy numbers, plasmid integrations, other genomic rearrangements, protein expression levels, growth rate, and target product productivities. Τhe best clone in two strains produced 3.5 g L –1 nerolidol and ~0.96 g L –1 valencene. Comparable genotypic and phenotypic variations were also generated through the integration of a yeast integrative plasmid lacking 2μ sequences. Our work shows that multiple factors, including plasmid integration status, subchromosomal location, gene copy number, sesquiterpene synthase expression level, and genome rearrangement, together play a complicated determinant role on the productivities of sesquiterpene product. Integration of yeast episomal/integrative plasmids may be used as a versatile method for increasing the diversity and optimizing the efficiency of yeast cell factories, thereby uncovering metabolic control mechanisms.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Heavy-ion production of 77 Br and 76 Br

Many radioisotopes with potential medical applications are difficult to produce routinely, especially those on the proton-rich side of the valley of stability. Current production methods typically use light-ion (protons or deuteron) reactions on materials of similar mass to the target radioisotope, which limits the elemental target material available and may require the use of targets with poor thermal properties (as is the case for the production of radiobromine). These reactions may also create significant amounts of proton-rich decay products which require chemical separation from the desired product in a highly radioactive environment. A promising alternative method using heavy-ion fusion-evaporation reactions for the production of the medically relevant bromine radioisotopes 76 Br (t 1/2 = 16.2 h) and 77 Br (t 1/2 = 57.0 h) is presented. Heavy-ion beams of 28 Si and 16 O were used to bombard natural chromium and copper targets just above the Coulomb barrier at the University of Notre Dame's Nuclear Science Laboratory to produce these bromine and precursor radioisotopes by fusion-evaporation reactions. Production yields for these reactions were measured and compared to PACE4 calculations. In addition to using more robust targets for irradiation, a simple physical–chemical separation method is proposed that will lead to very high radiopurity yields. A summary of accelerator facility requirements needed for routine production of these radioisotopes is also presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗